PTCP-36-11 [TECHNOLOGY]
SWITCHING POWER SUPPLIES;
| 型号： | PTCP-36-11 |
| 厂家： | 
Technology Dynamics |
| 描述： | SWITCHING POWER SUPPLIES 开关 |
| 文件： | 总2页 (文件大小：255K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
APPLIED POWER CONVERSION
Division of
TECHNOLOGY DYNAMICS INC.
PTCP SERIES
400-1000 WATT SINGLE OUTPUT
2.66” x 4.75” x 11.50”
“COTS” POWER FACTOR CORRECTED
APPLICATIONS
The PTCP series 400-1000W AC-DC power
supplies provides highly regulated output power
from 400-1000 watts.Rugged construction and
superior quality make this power supply ideal
for harsh environment applications. Available
in standard, modified or fully custom
configurations, for industrial, commercial,
COTS, Ruggedized and Military applications.
STANDARD FEATURES
• .98 Typical Power Factor
• Full Range
• Low Noise and Ripple
• Built In DC Fan For Cooling
• Current Share Function
• DC Good Signal
• Remote On/Off & Remote Sense Functions
• Rugged Construction
• High Reliability/Superior Quality
INPUT SPECIFICATIONS:
Input: 100-264 VAC Single Phase
Input Frequency: 47-63Hz (400 Hz Optional)
Inrush Current: 60A max at 230VAC(cold start)
Input Current: 6.5A max @ 115VAC 3.5A max @ 230VAC
Efficiency: 85 typical (depending on output model)
Hold-up time: 16ms at full load (minimum)
Leakage Current: <3.5mA maximum @ 240 VAC
OUTPUT SPECIFICATIONS
Adjustment Range: ±10% (minimum)
Minimum Load: none
AVAILABLE OPTIONS
• Hot Swap
Regulation: Line ±0.5% Load ±0.5% Typical
Ripple/Noise: 150mV peak to peak maximum (20 MHz)
Set Point Accuracy: ±1%(except 5V=±2%) (maximum)
Output voltage adj: ±10% minimum
Overcurrent Protection: 105-125% automatic recovery Constant Current
Overlvoltage Protection: 115-140% of V1 nominal
Overtemperature Protection: Heatsink Temp. 90°C ± 5°C Auto Recovery
• Parallel Operation
• ORing Diode for Redundant Operation
• Rack / Panel Mount
• Ruggedized for shock & vibration
• 400Hz Operation
• Conformal Coating
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0°C to +50°C. Derate to 50% at +70°C
Storage Temperature: -40°C to +85°C max 95% Relative Humidity
Cooling: Internal ball bearing DC fan
• LVBD (Battery Back-Up)
SAFETY AND EMISSIONS
• Designed to meet UL/cUL60950-1
Humidity: 20-90% RH non condensing
• Designed to meet TUV EN60950-1
• Designed to meet EN55022 (Class A)
• Designed to meet EN 55024
Vibration: 10-500Hz, 2G 10min/1cycle for 60 min (3 axes)(Standard Unit)
Shock: 20G Peak Acceleration (Standard Unit)
Weight: Approx: 6.6 LBS
Size: 2.66” x 4.75” x 11.50”
• Designed to meet EN61000-3-2-3
Design Excellence since 1976!
File: A5269
MODEL SELECTION
800 WATTS
400 WATTS
600 WATTS
1000 WATTS
Model
Output
Model
Model
Output
Model
Output
Output
3.5/5V@80A
12V@34A
15V@27A
24V@17A
28V@14A
36V@11A
48V@8A
N/A
PTCP - 5 - 80
PTCP - 12 - 34
PTCP - 15 - 27
5V@100A
12V@50A
N/A
PTCP-5-100
PTCP - 12 - 50
PTCP - 15 - 40
PTCP - 24 - 25
PTCP - 28 - 20
PTCP - 36 -16
PTCP - 48 - 12
Consult
Factory
12V@66A
PTCP - 12 - 66
PTCP - 15 - 53
PTCP - 24 - 33
PTCP - 28 - 28
PTCP - 36 - 22
PTCP - 48 - 16
15V@53A
24V@33A
28V@28A
15V@40A
24V@25A
28V@20A
PTCP - 24 - 17
PTCP - 28 - 14
PTCP - 36 - 11
PTCP - 48 - 8
PTCP - 24 - 41
24V@41A
28V@35A
36V@27A
48V@20A
PTCP - 28 - 35
PTCP - 36 - 27
PTCP - 48 - 20
36V@22A
48V@16A
36V@16A
48V@12A
OPTION DESIGNATIONS
-WTO
-HSP
-ORD
-RK
WIDE TEMPERATURE OPERATION
HOT SWAP
Low Voltage Battery Disconnect
REDUNDANT OPERATION (ORING DIODE)
RACK MOUNT
The LVBD module adds a new dimension to battery backup power
supplies. The power supply simultaneously charges the battery and
powers the load. If the AC power fails, the battery continues to
support the load. However, when the battery voltage drops below a
predetermined level, the LVBD module disconnects the battery from
the load, thereby protecting the battery from the damaging effects of
complete discharge.
-MIL
RUGGEDIZED/MILITARIZED
CONFORMAL COATING
BATTERY BACK-UP
-CC
-LVBD
-PAR
-PNL
PARALLEL OPERATION
PANEL MOUNT
-400HZ
400 Hz OPPERATION
MECHANICAL OUTLINE
APPLIED POWER CONVERSION
division of
TECHNOLOGY DYNAMICS INC.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
100 School Street, Bergenfield, NJ 07621
Phone: (201) 385-0500, Fax: (201) 385-0702
Website: www.theallpower.com
相关型号：
©2020 ICPDF网 联系我们和版权申明