AFG1022 [TEKTRONIX]
Arbitrary/Function Generator;
| 型号： | AFG1022 |
| 厂家： | 
TEKTRONIX, INC. |
| 描述： | Arbitrary/Function Generator |
| 文件： | 总12页 (文件大小：288K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Arbitrary/Function Generator
AFG1000 Series Datasheet
™
Compatible with TekSmartLab for easy teaching and learning
Standard 5-year warranty
Applications
Electric and electronics experiments
Communications experiments
Sensor simulation
Functional test
Performance and features
1 μHz to 25 MHz or 60 MHz sine waveform range, with 12-digit or 1 μHz
resolution and a ±1 ppm drift high stability time base, provides great signal
fidelity in the frequency domain. With 1 mVp-p to 10 Vp-p output amplitude
range, and 14-bit or 1 mVp-p resolution over the whole frequency range,
there is no need to compromise between output amplitude and frequency
any more.
The AFG1000 Series Arbitrary Function Generator provides a waveform
generation tool with the best price performance ratio. It includes two models
with dual channels, up to 60 MHz bandwidth and up to 10 Vp-p output
amplitude. The four run modes, 50 built-in frequently-used waveforms and
the built-in 200 MHz frequency counter cover most waveform generation
needs in your experiment and test jobs. The 3.95-inch TFT LCD, short-cut
buttons, USB interface and PC software provide the most intuitive ways to
configure the instrument.
Four different run modes cover most use cases with a cost effective
solution. 50 most-frequently used standard and arbitrary waveforms are
built-in for easy access. Up to 1 M points arbitrary waveforms memory
enables users to replicate real world signals captured with a Tektronix
oscilloscope or defined with ArbExpress. The built-in 200 MHz and 6-digit
resolution frequency counter is an easy and precise way to measure
frequencies/periods/pulse widths/duty cycles.
Key performance specifications
Dual-channel, 25 MHz or 60 MHz sine waveforms, 12.5 MHz or
30 MHz square waveforms
Ease of use
14 bits, 125 MS/s or 300 MS/s arbitrary waveforms with 8 k points or
1 M points record length
The high-resolution 3.95-inch color TFT display shows relevant settings
and parameters in both text and graphic formats, which give users full
confidence in their settings, and let them focus on the task at hand. The
front panel shortcut buttons and rotary knob make accesses to most
frequently used functions and settings with minimum effort and time. The
built-in 64-MByte non-volatile memory together with USB stick memory
interface, provide unlimited space for user-defined waveform storage.
Amplitude 1 mVp-p to 10 Vp-p into 50 Ω loads
Key features
Continuous, sweeping, burst, and modulation modes (AM, FM, PM,
ASK, FSK, PSK, PWM) covers most requirements for students and
other users to get the experiments/test job done
64-MByte internal non-volatile memory for arbitrary waveform storage
Software and solutions
Built-in 200 MHz counter with 6-digit resolution offers an easy and
precise way of frequency/period/pulse width/duty cycle measurement
The user-defined arbitrary waveforms generated by the free ArbExpress
software can easily be loaded on the AFG1000 with a USB memory stick.
Standard USB host/device for memory expansion and remote control
As a building block of Tektronix educational solution, the AFG1000 can be
embedded into TekSmartLab and enable a cost efficient and effective way
of teaching, learning, and lab management.
Free ArbExpress makes user defined waveforms editing extremely
easy through an external USB memory stick
www.tek.com
1
Datasheet
Specifications
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Channels
Number of channels
2
Built-in waveforms
Built-in waveforms
Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms
General characteristics
Sine waves
AFG1022
AFG1062
Range
1 μHz to 25 MHz
1 μHz to 60 MHz
Sine wave in burst mode
2 mHz to 25 MHz
25 MHz
2 mHz to 30 MHz
60 MHz
Effective maximum frequency
out
Amplitude flatness (1 Vp-p),
typical
<10 MHz
±0.4 dB
±0.7 dB
±0.5 dB
±0.9 dB
≥10 MHz and ≤25 MHz
≥10 MHz and ≤60 MHz
Harmonic distortion (1 Vp-p
≤10 MHz
)
< -50 dBc
< -60 dBc
< -47 dBc
>10 MHz
< -50 dBc
Total harmonic distortion
Spurious (1 Vp-p), typical
Phase noise, typical
< 0.2% (10 Hz to 20 kHz, 1 Vp-p
)
< -45 dBc
1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p
-57 dBm
Residual clock noise, typical
Square wave
AFG1022
AFG1062
Range
1 μHz to 12.5 MHz
1 μHz to 30 MHz
Rise/fall time, typical
Jitter (rms), typical
Overshoot
<12 ns
<1 ns
<5%
<10 ns
<500 ps
2 www.tek.com
AFG1000 Series Arbitrary Function Generator Datasheet
General characteristics
Ramp wave
AFG1022
AFG1062
Range
1 μHz to 1 MHz
1 μHz to 2 MHz
Linearity, typical
Symmetry
≤ 0.1% of peak output at 10% - 90% of amplitude range, at 1 kHz, 1 V p-p , 50% symmetry
0.0% to 100.0%
Pulse wave
Range
AFG1022
AFG1062
1 μHz to 12.5 MHz
1 μHz to 30 MHz
Pulse width range
Pulse width resolution
Pulse duty
40 ns to 999 ks
1 ns or 4 digits
17 ns to 999 ks
<1 MHz, 0.1% to 99.9% (limitations of pulse duty width apply)
≥1 MHz, 50% fixed
≥1 MHz, 50% fixed
<10 ns, fixed
Edge transition time, typical
Overshoot, typical
<12 ns, fixed
<5%
Jitter (rms), typical
<1 ns
<500 ps
Noise
AFG1022
AFG1062
Noise bandwidth (-3 dB)
Noise type
25 MHz
50 MHz
White Gausian
DC
AFG1022
AFG1062
Range
-5 V to +5 V, 50 Ω load
-10 V to + 10 V, open circuit or high Z load
Arbitrary waveform
Range
AFG1022
AFG1062
1 μHz to 10 MHz
1 μHz to 30 MHz
Arbitrary waveform in burst
mode
2 mHz to 10 MHz
30 MHz
2 mHz to 30 MHz
60 MHz
Effective analog bandwidth
(-3 dB)
Non-volatile memory
64 MByte
Memory
Length
2 to 8,192
125 MS/s
14 bits
2 to 1 M-point
300 MS/s
Sampling rate
Vertical resolution
Rise and fall time
Jitter (rms), typical
< 10 ns
< 6 ns
< 8 ns
www.tek.com
3
Datasheet
General characteristics
Frequency
AFG1022
AFG1062
Resolution
1 μHz or 12 digits
Internal reference stability
Internal reference aging
±1 ppm at 0 - 40 °C
±1 ppm per year
Amplitude
Range (50 Ω load)
AFG1022
AFG1062
≤25 MHz
>25 MHz
1 mVp-p to 10 Vp-p
1 mVp-p to 10 Vp-p
-
1 mV p-p to 5 V p-p
Range (Open circuit or high Z
load)
≤25 MHz
>25 MHz
2 mVp-p to 20 Vp-p
-
2 mV p-p to 20 V p-p
2 mV p-p to 10 V p-p
Accuracy
±(1% of setting +1 mVp-p), (1 kHz sine waveform, 0 V offset)
Resolution
1 mVp-p, 1 mVrms or 4 digits
Vp-p, Vrms
Units
Output impedance
Local impedance setting
Isolation
50 Ω (typical)
Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance)
No floating ground, signal ground connected to chassis ground
Signal output protection
Short-circuit tolerance, main output automatically disabled when over current
DC offset
Range
±(5 Vpk – Amplitudep-p/2), 50 Ω load
±(10 Vpk – Amplitudep-p/2), open circuit or high Z load
Accuracy
±(1% of |setting| + 1 mV + 0.5% of amplitude (Vp-p))
1 mV or 4 digits
Resolution
Modulation
Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.
The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.
Amplitude modulation
Carrier waveforms
Source
Sine, square, ramp, arbitrary, except DC and noise
Internal / external
Internal modulating
waveforms
Sine, square, ramp, noise, arbitrary
Internal AM frequency
Depth
2 mHz to 20 kHz
0.0% to 100.0%
4 www.tek.com
AFG1000 Series Arbitrary Function Generator Datasheet
Modulation
Frequency modulation
Carrier waveforms
Source
Sine, square, ramp, arbitrary, except DC and noise
Internal / external
Internal modulating
waveforms
Sine, square, ramp, noise, arbitrary
Internal modulating frequency 2 mHz to 20 kHz
Frequency deviation
(limited by carrier waveform type)
AFG1022
AFG1062
2 mHz to 12.5 MHz
2 mHz to 30 MHz
Phase modulation
Carrier waveforms
Source
Sine, square, ramp, arbitrary, except DC and noise
Internal / external
Internal modulating
waveforms
Sine, square, ramp, noise, arbitrary
Internal PM frequency
Phase Deviation
2 mHz to 20 kHz
0° to 180°
Amplitude shift keying
Carrier waveforms
Source
(AFG1062 only)
Sine, square, ramp, arbitrary, except DC and noise
Internal / external
Internal modulating
waveforms
50% duty cycle square
ASK rate
2 mHz to 100 kHz
Frequency shift keying
Carrier waveforms
Source
Sine, square, ramp, arbitrary, except DC and noise
Internal / external
Internal modulating
waveforms
50% duty cycle square
FSK rate
2 mHz to 100 kHz
Phase shift keying
Carrier waveforms
Source
(AFG1062 only)
Sine, square, ramp, arbitrary, except DC and noise
Internal / external
Internal modulating
waveforms
50% duty cycle square
PSK rate
2 mHz to 100 kHz
Pulse width modulation
Carrier waveforms
Source
(AFG1062 only)
Pulse, ≤1 MHz
Internal / external
Internal modulating
waveforms
Sine, square, ramp, arbitrary, except DC and noise
PWM frequency
Deviation
2 mHz to 20 kHz
0.0% to 50.0% of pulse period
www.tek.com
5
Datasheet
Sweeping
Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.
The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.
Carrier waveforms
Sine, square, ramp, arbitrary (AFG1062 only)
1 μHz
Minimum start-stop frequency
Maximum start-stop frequency
Sine
AFG1022
AFG1062
25 MHz
60 MHz
Square
Ramp
12.5 MHz
1 MHz
30 MHz
2 MHz
Type
Linear, logarithmic
Up / down
Direction
Sweep time
Trigger sources
1 ms to 500 s ± 0.1%
Internal, external, or manual
Burst
Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.
The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.
Waveforms
Types
Sine, square, ramp, pulse, arbitrary except DC and noise
AFG1022: count (1 to 50,000 cycles), infinite, gated
AFG1062: count (1 to 1,000,000 cycles), infinite, gated
Start phase
-360° to +360°
Trigger sources
Internal trigger interval
Gate source
Internal, external, or manual
(40 ns or (cycles x period) to 500 s) ± 1%
External trigger
Frequency counter
Function
Frequency, period, positive pulse width, duty cycle
Frequency range
Frequency resolution
Coupling mode
100 mHz to 200 MHz
6 digits
AC, DC
6 www.tek.com
AFG1000 Series Arbitrary Function Generator Datasheet
Frequency counter
Voltage Range and Sensitivity, DC
coupled (non-modulation signal)
100 mHz to 100 MHz
100 MHz to 200 MHz
250 mVp-p to 5 Vp-p (AC + DC)
450 mVp-p to 3 Vp-p (AC + DC)
Voltage range and sensitivity, AC
coupled (non-modulation signal)
1 Hz to 100 MHz
250 mVp-p to 5 Vp-p
450 mVp-p to 4 Vp-p
100 MHz to 200 MHz
Pulse width and duty cycle
measure
1 Hz to 10 MHz
Input impedance
1 M Ω in parallel with 100 pF
High frequency noise restraint
(HFR)
On / Off (HFR frequency = 500 kHz)
Sensitivity
Low, middle, or high
-2.5 V to +2.5 V
Trigger level range
Auxiliary inputs and outputs
External modulation input
Input frequency range
Input voltage range
Input impedance
DC to 20 kHz
All except FSK: ±1 V full scale, FSK: 3.3 V logic level
12 kΩ (typical)
External trigger input
Level
TTL-compatible
Rising or falling (selectable)
>100 ns
Slope
Pulse Width
External reference clock input
Impedance
(Shared with Frequency Counter Input)
400 Ω, AC coupled
Requested Input voltage
swing
100 mVp-p to 5 Vp-p
Locking range
10 MHz ±9 kHz
External reference clock output
Frequency
10 MHz
Impedance
50 Ω, DC coupled
1.6 Vp-p into 50 Ω load
Amplitude
Communication interface
USB
Host and device, USB TMC compliance
www.tek.com
7
Datasheet
Display
Display type
3.95-inch
480 by 320
65,536
Display resolution
Display colors
Menu and online help languages
Menu and online help languages
English and Simplified Chinese
Power source
Supply
220-240 VAC, 100-120 VAC, 50/60 Hz, CATⅡ
Consumption
Fuse
AFG1022: Less than 28 W
AFG1062: Less than 35 W
110 V: 250 V, F1AL
220 V: 250 V, F0.5AL
Warm-up time
30 minutes (typical)
Physical characteristics
Dimensions (W, H, D)
230 × 110 × 306 mm (9.0 × 4.4 × 12.1 in)
Weight
Net
3.4 kg (7.5 lbs)
4.7 kg (10.3 lbs)
Shipping
EMC environment and safety
Temperature
Working
0 ℃ to 40 ℃ (32 °F to 104 °F)
-20 ℃ to 60 ℃ (-4 °F to 144 °F)
Storage
Relative humidity (non-
condensing)
Operating: ≤ 80%, +0 °C to +40 °C (+32 °F to +104 °F)
Non-operating: 5% to 90%, < +40 °C (+104 °F)
Non-operating: 5% to 80%, ≥ +40 °C (+104 °F) to ≤ +60 °C (+140 °F)
Altitude
Operating: up to 3,000 m (9843 ft.)
Non-operating: up to 12,000 m (39,370 ft)
Cooling method
Fan cooling
EMC compliance
European Union
Australia/NZ
EN 61326-1
CISPR 11, Class A
8 www.tek.com
AFG1000 Series Arbitrary Function Generator Datasheet
EMC environment and safety
Safety compliance
UL 61010-1
CAN/CSA-C22.2 No. 61010-1
EN 61010-1
IEC 61010-1
Ordering information
Models
AFG1022
AFG1062
Arbitrary Function Generator
Arbitrary Function Generator
Instrument options
Power plug options
Opt. A0
North America power plug (115 V, 60 Hz)
Universal Euro power plug (220 V, 50 Hz)
United Kingdom power plug (240 V, 50 Hz)
Australia power plug (240 V, 50 Hz)
Switzerland power plug (220 V, 50 Hz)
Japan power plug (100 V, 50/60 Hz)
China power plug (50 Hz)
Opt. A1
Opt. A2
Opt. A3
Opt. A5
Opt. A6
Opt. A10
Opt. A11
India power plug (50 Hz)
Opt. A12
Brazil power plug (60 Hz)
Opt. A99
No power cord
Service options
Opt. C3
Calibration Service 3 Years
Calibration Service 5 Years
Opt. C5
Probes and accessories are not covered by the warranty and Service Offerings. Refer to the datasheet of each probe and accessory model for its unique warranty and
calibration terms.
www.tek.com
9
Datasheet
Accessories
Standard Accessories
AFG1000 Arbitrary/Function Generator Safety and Compliance Instructions; printed document
AFG1000 Documentation CD containing the following PDF documents:
AFG1000 Arbitrary/Function Generators Quick Start User Manual, English
AFG1000 Arbitrary/Function Generators Quick Start User Manual, Simplified Chinese
AFG1000 Arbitrary/Function Generators Programmer Manual
AFG1000 Arbitrary/Function Generators Specifications and Performance Verification Manual
PDF documents not included on the AFG1000 Documentation CD but available for download from www.tek.com.
AFG1000 Arbitrary/Function Generators Quick Start User Manual, Russian, (Tektronix part number 077-1135-xx)
AFG1000 Arbitrary/Function Generators Quick Start User Manual, Japanese, (Tektronix part number 077-1166-xx)
Packing list
Power cord, specified by country
Certificate of calibration; printed document
USB cable x 1, Type A to Type B
BNC cable x 2
Tektronix Supplemental Information Sheet For the Peoples Republic of China: China RoHs; printed document
Fuse, cartridge; 5 x 20 mm, 0.5 A, 250 V, time-delay
Fuse, cartridge; 5 x 20 mm, 1 A, 250 V, time-delay
Warranty
Five year warranty on parts and labor
Recommended accessories
174-4401-xx, USB cable, type A to type B cable – three feet
174-5194-xx, USB cable, type A to type B cable – six feet
012-1732-xx, BNC cable assembly, 0 to 1 GHz, shielded – three feet
159-0568-xx, Fuse, cartridge; 5 x 20 mm, 0.5 A, 250 V, time-delay
159-0569-xx, Fuse, cartridge; 5 x 20 mm, 1 A, 250 V, time-delay
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments.
10 www.tek.com
AFG1000 Series Arbitrary Function Generator Datasheet
www.tek.com 11
Datasheet
ASEAN / Australasia (65) 6356 3900
Belgium 00800 2255 4835*
Austria 00800 2255 4835*
Brazil +55 (11) 3759 7627
Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Canada 1 800 833 9200
Central East Europe and the Baltics +41 52 675 3777
Finland +41 52 675 3777
Central Europe & Greece +41 52 675 3777
France 00800 2255 4835*
Denmark +45 80 88 1401
Germany 00800 2255 4835*
Hong Kong 400 820 5835
India 000 800 650 1835
Italy 00800 2255 4835*
Japan 81 (3) 6714 3086
Luxembourg +41 52 675 3777
The Netherlands 00800 2255 4835*
Poland +41 52 675 3777
Russia & CIS +7 (495) 6647564
Sweden 00800 2255 4835*
Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Norway 800 16098
Portugal 80 08 12370
South Africa +41 52 675 3777
Switzerland 00800 2255 4835*
USA 1 800 833 9200
Middle East, Asia, and North Africa +41 52 675 3777
People's Republic of China 400 820 5835
Republic of Korea +822 6917 5084, 822 6917 5080
Spain 00800 2255 4835*
Taiwan 886 (2) 2656 6688
United Kingdom & Ireland 00800 2255 4835*
* European toll-free number. If not accessible, call: +41 52 675 3777
For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tek.com.
©
Copyright Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and
price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
25 Apr 2017 75W-60160-2
www.tek.com
相关型号：
©2020 ICPDF网 联系我们和版权申明