412D-6 [TELEDYNE]
ESTABLISHED RELIABILITY TO-5 RELAYS;型号: | 412D-6 |
厂家: | TELEDYNE TECHNOLOGIES INCORPORATED |
描述: | ESTABLISHED RELIABILITY TO-5 RELAYS |
文件: | 总6页 (文件大小:142K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SERIES
412
ESTABLISHED RELIABILITY
TO-5 RELAYS
DPDT
SERIES
DESIGNATION
RELAY TYPE
412
DPDT basic relay
412D
DPDT relay with internal diode for coil suppression
DPDT relay with internal diodes for coil transient suppression and polarity
reversal protection
412DD
412T
DPDT relay with internal transistor driver and coil transient suppression
diode
INTERNAL CONSTRUCTION
DESCRIPTION
The TO-5 relay, originally conceived and developed by Teledyne, has become
UNI-FRAME
UPPER
one of the industry standards for low-level switching from dry circuit to 1
ampere. Designed expressly for high-density PC board mounting, its small size
and low coil power dissipation make the 412 relay one of the most versatile
ultraminiature relays available.
STATIONARY
CONTACT
ARMATURE
LOWER
STATIONARY
CONTACT
The following unique construction features and manufacturing techniques
provide excellent resistance to environmental extremes and overall high
reliability.
MOVING
CONTACT
• All welded construction.
• Unique uni-frame design, providing high magnetic efficiency and
mechanical rigidity.
• High force/mass ratios for resistance to shock and vibration.
• Advanced cleaning techniques provide maximum assurance of internal
cleanliness.
• Precious metal alloy contact material with gold plating assures excellent
high current and dry circuit switching capabilities.
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
The Series 412D and 412DD relays have internal discrete silicon diodes for
coil suppression and polarity reversal protection. The hybrid 412T relay
features an internal silicon suppression diode and transistor driver. This hybrid
package reduces required PC board floor space by reducing the number of
external components needed to drive the relay.
Temperature
–65°C to +125°C
30 g’s to 3000 Hz
(Ambient)
Vibration
(General Note 1)
By virtue of its inherently low intercontact capacitance and contact circuit
losses, the 412 relay has proven to be an excellent ultraminiature RF switch
for frequency ranges well into the UHF spectrum. A typical RF application for
the TO-5 relay is in handheld radio transceivers, wherein the combined
features of good RF performance, small size, low coil power dissipation and
high reliability make it a preferred method of T-R switching (see Figure 1).
Shock
75 g’s,
6 msec, half-sine
(General Note 1)
Acceleration
Enclosure
Weight
50 g’s
Hermetically sealed
0.09 oz. (2.55g) max.
©2003 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
412 Page 1
412/1203/Q1
SERIES 412
GENERAL ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Notes 2 & 3)
Contact Arrangement
Rated Duty
2 Form C (DPDT)
Continuous
Contact Resistance
0.1 ohm max. before life; 0.2 ohm max. after life at 1A/28Vdc (measured 1/8" from header)
Resistive:
Inductive:
Lamp:
1 Amp/28Vdc
200 mA/28Vdc (320 mH)
100 mA/28Vdc
Contact Load Ratings (DC)
(See Fig. 2 for other DC
resistive voltage/current ratings)
Low Level:
10 to 50 μA/10 to 50mV
Resistive:
250 mA/115Vac, 60 and 400 Hz (Case not grounded)
100 mA/115Vac, 60 and 400 Hz (Case grounded)
Contact Load Ratings (AC)
Contact Life Ratings
10,000,000 cycles (typical) at low level
1,000,000 cycles (typical) at 0.5A/28Vdc resistive
100,000 cycles min. at all other loads specified above
Contact Overload Rating
Contact Carry Rating
Coil Operating Power
Operate Time
Release Time
Contact Bounce
2A/28Vdc Resistive (100 cycles min.)
Contact factory
450 milliwatts typical at nominal rated voltage @ 25°C
2.0 msec max. at nominal rated coil voltage
412 Series: 1.5 msec max. 412D, 412DD Series: 4.0 msec max. 412T Series: 7.5 msec max.
1.5 msec max.
Intercontact Capacitance
Insulation Resistance
Dielectric Strength
Negative Coil Transient (Vdc)
Diode P.I.V. (Vdc)
0.4 pf typical
10,000 megohms min. between mutually isolated terminals
Atmospheric pressure: 500 Vrms/60Hz
412D, 412DD, 412T
70,000 ft.: 125 Vrms/60Hz
1.0 max
412D, 412DD, 412T
100 min.
Base Turn Off Voltage (Vdc)
Emitter-base breakdown Voltage (BVEBO) (@25°C) (Vdc)
0.3 min.
6.0 min.
412T
Transistor
Characteristics
Collector-base breakdown Voltage (BVEBO) (@25°C & lc = 100 μA) (Vdc)
75 min.
DETAILED ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Note 3)
412-5
412D-5
412DD-5
412T-5
412-6
412D-6
412DD-6
412T-6
412-9
412D-9
412-12
412D-12
412-18
412D-18
412-26
412D-26
BASE PART
NUMBERS
412DD-9 412DD-12 412DD-18 412DD-26
412T-9
(See Note 10 for full P/N example)
412T-12
12.0
16.0
390
412T-18
18.0
24.0
880
412T-26
26.5
32.0
1560
1560
14.8
18.5
14.7
19.8
18.0
19.0
18.0
0.50
0.89
13.0
1.4
Nom.
Max.
5.0
5.8
50
6.0
8.0
98
9.0
Coil Voltage (Vdc)
Coil Resistance
12.0
220
220
33.0
42.9
35.3
47.4
6.8
7.8
6.8
1.36
0.35
4.9
412, 412D, 412T (Note 4)
(Ohms 10ꢀ @25°C)
412DD (Note 4)
Min.
39
78
390
880
93.2
128.2
82.2
112.1
3.5
3.9
3.5
3.00
0.14
2.3
58.3
78.3
52.9
69.9
4.5
5.2
4.5
2.04
0.18
3.2
25.6
32.8
26.6
35.8
9.0
10.0
9.0
1.03
0.41
6.5
17.5
22.1
17.9
24.0
13.5
14.5
13.5
0.68
0.59
10.0
1.1
Coil Current (mAdc @25°C)
(412DD Series)
Max.
Min.
Coil Current (mAdc @25°C)
(412T Series)
(Note 7)
Max.
412, 412D
412DD
412T (Note 7)
Pick-up Voltage (Vdc, Max.)
Base Current to Turn On (mAdc, Max.) (412T Series) (Note 7)
Min.
Max.
Min.
412, 412D, 412T
Drop-out Voltage (Vdc)
0.6
2.8
0.7
3.4
0.8
5.3
0.9
6.5
412DD
Max.
10.0
13.0
PERFORMANCE CURVES
TYPICAL DC CONTACT RATING (RESISTIVE)
TYPICAL RF PERFORMANCE
(NOTE 2)
0
.1
.2
.3
.4
300
250
200
150
100
50
10
20
30
40
50
60
70
1.92
1.22
1.07
1.02
1.01
1.00
1.00
.01
0.5
.1
.5
1.0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
FREQUENCY (GHz)
LOAD CURRENT (AMPS DC)
FIGURE 1
FIGURE 2
412 Page 2
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
©2003 TELEDYNE RELAYS
412/1203/Q1
SERIES 412
SCHEMATIC DIAGRAMS
TERMINAL LOCATIONS AND PIN NUMBERING (REF. ONLY)
(Viewed from Terminals)
OUTLINE DIMENSIONS
.370
(9.40)
DIA. MAX.
.031 (.79)
.003 (0.08)
.335
(8.51)
DIA. MAX.
10
TRANSISTOR BASE
CONNECTION FOR
412
412DD
9
6
1
4
412T ONLY
.035 (.89)
.010 (0.25)
8
7
2
3
.270 (6.86) MAX.
.200 (5.08)
.010 (.25) DIA.
36° 3°
WIRE LEAD: .75 (19.05) MIN.
PIN: .187 (4.75) .010 (.25)
(See Note 6)
TYP.
5
412D
412T
+.002 (.05)
–.001 (.03)
SCHEMATICS ARE VIEWED
FROM TERMINALS
.017 (.43)
DIA.
DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)
TYPICAL LOGIC INTERFACE
(See Note 8)
GENERAL NOTES
1. Relay contacts will exhibit no chatter in excess of 10 μsec or transfer in excess of
1 μsec.
Vcc
Vr
Pin 1
2. “Typical” characteristics are based on available data and are best estimates. No
on-going verification tests are performed.
Notes:
3. Unless otherwise specified, parameters are initial values.
4. For reference only. Coil resistance not directly measurable at relay terminals due
to internal series semiconductor. 412DD and 412T only.
5. Unless otherwise specified, relays will be supplied with either gold-plated or
solder-coated leads.
6. The slash and characters appearing after the slash are not marked on the relay.
7. Limit Base Emitter current to 15 mAdc.
Logic 1 activates the relay.
Logic 0 de-activates the relay.
Vcc = logic bias power.
Vr = coil energization voltage.
Logic element
Pin 10
1 = 0.50 to 3.00mA
0 = 0.3Vdc min.
Pin 9
8. Applicable to all coil voltages. See Base current to turn on.
9. Screened HI-REL versions available. Contact factory.
10.
2
®
Teledyne Part Numbering System for T R Established Reliability Relay
ER 412
Y
M - 26 A / S Q
Estab
Q= Solder-Coated Leads
G= Gold-Plated Leads
(Notes 5 and 6)
lished Reliability
Designator
Relay Series
Optional Ground Pin
(See Appendix)
S= .187" leads
(Note 6)
Screening and Reliability
Level
Pad Option
(See Appendix)
Coil Voltage
Teledyne Part Numbering System for Military Qualified (JAN) Relays
412 26
J
Y
M
-
P
L
Militar
y (JAN)
Screening and Reliability
Level
Designator
Relay Series
Terminal Variant
P = 0.187"
Optional Ground Pin
(See Appendix)
Coil Voltage
Spreader Option
(See Appendix)
©2003 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
412 Page 3
412/1203/Q1
Appendix A: Spacer Pads
Pad designation and
Dim. H
Max.
Height
For use with the following:
bottom view dimensions
ER411T
ER412, ER412D, ER412DD
712, 712D, 712TN,
RF300, RF310, RF320
.295 (7.49)
Ø.150
[3.81]
(REF)
.300 (7.62)
Dim
MAX
H
ER420, ER422D, ER420DD, 421,
ER421D, ER421DD, ER422, ER422D, .305 (7.75)
ER422DD, 722, 722D, RF341
ER431T, ER432T,
ER432, ER432D, ER432DD
.400 (10.16)
732, 732D, 732TN, RF303, RF313,
RF323
.410 (10.41)
RF312
.350 (8.89)
.295 (7.49)
“M4” Pad for TO-5
“M4” Pad for TO-5
ER411, ER411D, ER411DD
Dim
MAX
H
ER431, ER431D, ER431DD
RF311
.400 (10.16)
.300 (7.62)
RF331
.410 (10.41)
.305 (7.75)
172, 172D
ER114, ER114D, ER114DD,
J114, J114D, J114DD
Dim
MAX
H
.300 (7.62)
ER134, ER134D, ER134DD,
J134, J134D, J134DD
.400 (10.16)
RF100
RF103
.315 (8.00)
“M4” Pad for Centigrid®
.420 (10.67)
.156
[3.96]
(REF)
122C, A152
.320 (8.13)
.300 (7.62)
Dim
MAX
H
ER116C, J116C
.256
[6.5]
ER136C, J136C
RF180
.400 (10.16)
.325 (8.25)
.305 (7.75)
(REF)
A150
“M9” Pad for Centigrid®
Notes:
1. Spacer pad material: Polyester ꢀlm.
2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering
example in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise speciꢀed, tolerance is .010 (.25).
5. Add 10 mꢁ to the contact resistance show in the datasheet.
6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
© 2008 Teledyne Relays
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Appendix A: Spreader Pads
Pad designation and
bottom view dimensions
Dim. H
Max.
Height
For use with the following:
ER411T, J411T, ER412, ER412D
ER412DD, J412, J412D, J412DD
ER412T, J412T
.370 [9.4]
MAX SQ
.388 (9.86)
.393 (9.99)
.493 (12.52)
.503 (12.78)
.100
[2.54]
Dim
MAX
H
712, 712D, 712TN
.150
.014
[0.36]
(REF)
ER431T, J431T, ER432, ER432D
ER432DD, J432, J432D, J432DD
ER432T, J432T
[3.81]
.300
[7.62]
.100
[2.54]
732, 732D, 732TN
.370
[9.4]
MIN
ER420, J420, ER420D, J420D
ER420DD, J420DD, ER421, J421
ER421D, J421D, ER421DD
.200
[5.08]
.398 (10.11)
J422D, ER422DD, J422DD, 722
“M” Pad 5/ 6/
.390 [9.91]
SQ
ER411T
ER412, ER412D, ER412DD
J412, J412D, J412DD
.100
[2.54]
.441 (11.20)
.100
[2.54]
.150
[3.81]
Dim
MAX
H
712, 712D
ER421, ER421D, ER421DD
722, 732D
.451 (11.46)
.451 (11.46)
.300
[7.62]
ER431T
.130
[3.3]
.150
[3.81]
.546 (13.87)
.556 (14.12)
ER432, ER432D, ER432DD
.300
[7.62]
732, 732D
“M2” Pad 7/ 8/
ER411, ER411D, ER411DD
ER411TX
ER412X, ER412DX, ER412DDX
ER412TX
.388 (9.86)
.393 (9.99)
.398 (10.11)
.370 [9.4]
MAX SQ
.100
[2.54]
712X, 712DX, 712TNX
Dim
MAX
H
ER420X, ER420DX, ER420DDX
ER421X, ER421DX, ER421DDX
ER422X, ER422DX
ER422DDX, 722X, 722DDX
ER431, ER431D, ER431DD
ER431TX
ER432X, ER432DX, ER432DDX
ER432TX
732X, 732DX, 732TNX
.150
[3.81]
.014
[0.36]
(REF)
.300
[7.62]
.100
[2.54]
.370
[9.4]
MIN
.200
[5.08]
.493 (12.52)
.503 (12.78)
“M3” Pad 5/ 6/ 9/
Notes:
1. Spreader pad material: Diallyl Phthalate.
2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example
in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise speciꢀed, tolerance is .010” (0.25).
5/. Add 25 mꢁ to the contact resistance shown in the datasheet.
6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
7/. Add 50 mꢁ to the contact resistance shown in the datasheet.
8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.
9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)
(800) 284-7007 • www.teledynerelays.com
ꢂ
+44 (0) 1236 453124 • www.teledyne-europe.com
© 2008 Teledyne Relays
Appendix A: Ground Pin Positions
"Z" POSITION
"X" POSITION
"Z" POSITION
Ø.200
[Ø5.08]
Ø.200
[Ø5.08]
"Y" POSITION
45° 3°
"Y" POSITION
36° 3°
TO-5 Relays:
TO-5 Relays:
ER411, ER431, RF311, RF331
ER411T, ER412, ER412T, ER420, ER421, ER422,
ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,
400V, RF300, RF303, RF341, RF312, RF310, RF313,
RF320, RF323
"Y" POSITION
.100
[2.54]
"Y" POSITION
"Z" POSITION
"W" POSITION
"Z" POSITION
.100
[2.54]
.100
[2.54]
.050
[1.27]
.100
[2.54]
"X" POSITION
"U" POSITION
.100
[2.54]
.100
[2.54]
(ER116C and ER136C only)
Centigrid® Relays:
RF180, ER116C, 122C, ER136C
Centigrid® Relays:
RF100, RF103, ER114, ER134, 172
NOTES
1. Terminal views shown
2. Dimensions are in inches (mm)
Indicates ground pin position
3. Tolerances: .010 ( .25) unless otherwise speciꢀed
4. Ground pin positions are within .015 (0.38) dia. of true position
5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.
6. Lead dia. 0.017 (0.43) nom.
Indicates glass insulated lead position
Indicates ground pin or lead position
depending on relay type
© 2008 Teledyne Relays
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
相关型号:
©2020 ICPDF网 联系我们和版权申明