C60-X0 [TELEDYNE]
Optically Isolated 0.5 to 2.5A;
| 型号： | C60-X0 |
| 厂家： | 
TELEDYNE TECHNOLOGIES INCORPORATED |
| 描述： | Optically Isolated 0.5 to 2.5A |
| 文件： | 总2页 (文件大小：768K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Series C60
Optically Isolated 0.5 to 2.5A
Bi-Directional Solid-State Relay
Part Number
C60-X0
Relay Description
Solid-State Relay, Terminals for Through Hole Mount
Solid-State Relay, Terminals for Surface Mount
SC60-X0
Add suffix 01 to denote 60Sn/40Pb Pre-Tinned Leads
ELECTRICAL SPECIFICATIONS
(25°C UNLESS OTHERWISE SPECIFIED)
INPUT (CONTROL) SPECIFICATIONS (See Note 1)
FEATURES/BENEFITS
• Power FET Output with Very
Low On Resistance: Virtually no
offset with very low leakage and
voltage drop.
Parameter
Min
Max
1.5
50
Units
Vdc
mA
Input Voltage Drop (See Figure 1)
Input Current (See Figure 1 and Notes 1, 7)
1.1
• Optical Isolation: Isolates
control elements from load
transients. Eliminates ground
loops and signal ground noise.
Input Current (Guaranteed On), (See Figure 4 and Note 7) 10
Input Current (Guaranteed Off)
mA
100
-6
µA
• Three Terminal Output: Output
FETs can be paralleled
externally to change current
load rating.
Reverse Voltage Protection
Vdc
OUTPUT (LOAD) SPECIFICATIONS (See Figure 2 And Note 2)
• Floating Output: Allows for high
and low side switching.
Part Number
DC
Bi-Directional
Parameter
Min Max
Min
Max
±60
±100
±200
±400
±1.25
±0.75
±0.50
±0.25
0.28
0.7
Units
Vdc
Vdc
Vdc
Vdc
Adc
Adc
Adc
Adc
Ohm
Ohm
Ohm
Ohm
µAdc
ms
• Switches High Voltages and
Currents: Voltages to 400 Vdc.
Current to 2.5 Adc.
Output Voltage Rating C60-10
60
C60-20
100
200
400
2.5
1.5
1.0
0.5
0.07
0.2
0.45
1.0
2.0
4.0
Bi-directional, DC or AC.
C60-30
• High Noise Immunity: Control
circuit cannot be triggered by
output switching noise.
C60-40
Output Current Rating C60-10
• 6-Pin Mini-DIP Package:
Standard or surface mount
available.
C60-20
C60-30
C60-40
DESCRIPTION
The Series C60 solid-state relay is
an advanced design capable of
switching very heavy loads in a
physically small 6-pin mini DIP
package. These relays have a
power FET output that ensures low
On resistance, no offset voltage
and low leakage current. They are
versatile and can be used to switch
AC, Bi-directional or DC loads.
Optical isolation ensures complete
protection of signal lines, power
and ground bus and control circuits
from switching noise and EMI.
On Resistance
(See Note 6)
C60-10
C60-20
C60-30
C60-40
1.8
4.0
Leakage Current at Rated Voltage
Turn-On Time @ 10mA C60-10
(See Figure 4 and Note 7)
1.0
4.0
C60-20,-30,-40
3.0
3.0
ms
Turn-Off Time
C60-10
C60-20,-30,-40
C60-10
C60-20
C60-30
C60-40
109
4.0
4.0
ms
3.0
3.0
ms
Output Capacitance
1000
500
400
400
500
250
200
200
pf
pf
pf
BLOCK DIAGRAM
pf
Isolation (Input to Output)
Dielectric Strength
109
1500
Ohms
Vrms
pF
1500
Capacitance (Input to Output)
Junction Temperature (TJ)
3.0
3.0
125
25
125
°C
Junction to Case Thermal Resistance
Case to Ambient Thermal Resistance
°C
75
°C/W
© 2010 TELEDYNE RELAYS
(800) 284-7007 • www.teledynerelays.com
C60 1
2DSC60-X0 Rev --
Series C60
CHARACTERISTIC CURVES
MECHANICAL SPECIFICATION
WIRING CONFIGURATIONS
NOTES:
1. Series resistor is required to limit input current to
50 mA maximum.
2. The input current is 10 mA for all tests unless
otherwise specified.
3. The surge current is non-repetitive for a
maximum duration of 20 ms (See Figure 3).
• Operating Temperature Range: -40°C to 85°C
• Storage Temperature Range: -40°C to 100°C
• Weight: 1 gm. maximum
4. Loads may be connected to positive or negative
referenced power supplies. Inductive loads must
be diode suppressed.
• Case: 6 pin dual in line, filled epoxy
5. Continuous load current is rated under the
conditions of still air and mounted on a printed
circuit board.
6. To calculate ON Resistance for a given junction
using the
temperature calculate the new R
equation shown below:
On
0.006(T -25°C)
x e
On (25°C)
R
=R
J
7. Turn on Time can be controlled with input control
current. Calculate a new turn-on time:
t
=(t
)(10mA/I )
8. Load voltage rating should be derated 10% at
On Specification Limit
In
-40°C
C60 2
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2010 TELEDYNE RELAYS
2DSC60-X0 Rev --
相关型号：
©2020 ICPDF网 联系我们和版权申明