DG34A-1011-15-1012-P505 [TELEDYNE]
automotive pcb power relay;型号: | DG34A-1011-15-1012-P505 |
厂家: | TELEDYNE TECHNOLOGIES INCORPORATED |
描述: | automotive pcb power relay |
文件: | 总3页 (文件大小:364K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DG34A
automotive pcb power relay
• Up to 30A /24VDC continuous rating
• 75VDC maximum switching voltage
• Optional version for starter solenoids
• Cost effective
• RoHS Compliant
Contacts
Contact number & arrangement
SPST-NO (1 Normally Open); SPDT ( 1 Changeover)
AgNi0.15; AgNi 90/10; AgCdO; AgSnOInO
Contact material
Max. switching voltage
Min. switching current / voltage
DC 75V
100mA/12VDC (AgNi 90/10, AgNi0.15); 500mA/12VDC (AgCdO,
AgSnOInO)
Max. continuous current
Max. switching current3 (AgSnOInO)
A SPST-NO: 30A / SPDT: 30A (NO), 15A (NC)
make SPST-NO: 60A / SPDT: 60A (NO), 30A (NC)
break SPST-NO: 30A / SPDT: 30A (NO), 15A (NC)
100mΩ, max. at 0.1A/6VDC
Initial resistance
Coil
Rated voltage
DC 6, 12, 24V
≥0.1Un
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation
See coil table 1
DC 1.5W
Insulation resistance
Dielectric strength
100MΩ at 500VDC, 50%RH
coil to contact 500Vrms, 1min
General Data
Operating time (typical)
Release time (typical)
Electrical Life5
ms
ms
9
7
ops 2 x 105
Mechanical life
Dimensions
ops 1 x 107
L x W x H 31.7 x 26.9 (max) x 19.1mm
20g (open frame); 26g (covered)
storage -40 to 155°C
Weight
Ambient temperature
operating -40 to 125°C
Shock resistance
Drop resistance
Functional: 20g 11ms; Destructive: 100g
1M height drop on to concrete (sealed type only)
Vibration resistance
10-40Hz: DA 1.27mm; 40-70Hz: 5g; 70-100Hz: DA 0.5mm; 100-
500Hz: 10g
Page 1 of 3
www.aecsensors.com
Sales Department Tel: (888) 847-6552
Ref: DG34A 121913JHM
DG34A
automotive pcb power relay
Coil Data
Table 1
Nominal Voltage
Coil Voltage Code
Coil Resistance (Ω) Must operate volt-
Max. allowable
voltage (VDC)
Must release volt-
age min. (VDC)
(VDC)
±10%
age max. (VDC)
1006
1012
1024
6
27
3.6
7.2
11.7
22.2
43.9
0.6
1.2
2.4
12
24
97
380
14.4
Ordering codes
Contact
Material
Contact
arrangement
Cover protec-
tion and
Coil code
Type
mounting
D
G
3
4
A
-
-
-
-
Contact Material
10
20
70
80
-
-
-
AgCdO
see Table 1
AgNi 90/10
AgSnOInO
AgNi 0.15
Contact Arrangement
11
21
-
-
SPDT ( 1 Changeover)
SPST-NO (1 Normally open)
Cover Protection Category
1
3
7
-
-
-
No cover (open frame)
Covered, sealed. IP67
Covered, dust cover
Terminations and mounting
5
-
PCB only
Options
P505
P597
P167
-
-
-
UL Class F Coil insulation
UL Class H Coil insulation
Special modification for starter solenoid switching.
Page 2 of 3
Ref: DG34A 121913JHM
www.aecsensors.com
Sales Department Tel: (888) 847-6552
DG34A
automotive pcb power relay
Overall Dimensions
Fig. 1
Dimensions in mm
PCB Mounting Dimensions
Fig. 2
Wiring Diagrams
Fig. 3
*
See Note 2
**
Bottom View
Notes:
Bottom View
1) All parameters, unless otherwise specified, are measured at an ambient temperature of 23°C.
2) PCB Mounting Holes - the “*” hole is not needed for the SPST-NO version and the hole “**” is not needed for a SPST-NC version (contact factory - special order only).
3) Maximum make current refers to inrush current for Lamp Load.
4) At an ambient temperature of 85°C, the maximum allowable coil voltage should be reduced to 72%.
5) Electrical life obtained at resistive or inductive load at 30A/15VDC with suitable arc suppression attached and with an operating frequency of 1 op/sec.
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516
Page 3 of 3
Ref: DG34A 121913JHM
www.aecsensors.com
Sales Department Tel: (888) 847-6552
相关型号:
©2020 ICPDF网 联系我们和版权申明