HTE39 [TELEDYNE]
Cylindrical High Voltage Resistors,Thicker film,Non-Inductive; 圆柱形高压电阻,厚膜,无感型号: | HTE39 |
厂家: | TELEDYNE TECHNOLOGIES INCORPORATED |
描述: | Cylindrical High Voltage Resistors,Thicker film,Non-Inductive |
文件: | 总2页 (文件大小:1289K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Cylindrical High Voltage
HTE Resistors,Thicker film,Non-Inductive
High Voltage High Frequency Resistors for various High Voltage Applications
HTE - series to meet general set of requirements , high voltages at reasonable prices.
HTE is in epoxy coating which is very good humidity protection, and a wide range of tolerances,TCR
available.
HTE Precision High Voltage Resistor, The m
Epoxy coating for excellent humidity protection
Std. Resistance tolrerance : 0.5% 1% 2% 5% 10
Main application for HV energy Capacitor's char
various HV Loads, HV Snubber, HV dampping ,on
tank,in Ion gun’s termination,etc...
* Resistance rating : 1kΩ to 700MΩ
* Power Ratings up to 15 Watts.
* Various Models with Voltage Ratings from
2.5kV to 48kV in free air.
* N.C.R. design : Non-contact resistance
design between resistives and termination
cap ,put on 3RLab's unique of conductive
pad.Willow
Dimensions in millimeters
(inches)
**Max.
Wattage Continuous Oper.
Volt[kV]
Resistance
[ ohm ]
Model Nr.
SMD type
Min. Max.
A
B
C
15+/-1.5ꢀ
5.0+/-1.5ꢀ
HTE15
HTE19
HTE25
HTE24
HTE39
HTE52
HTE76
HTE102
HTE127
HTE152
0.7
1.0
2.5
3.5
1Kꢀꢀ200M
1Kꢀꢀ200M
1Kꢀ200M
1Kꢀꢀ300M
1Kꢀꢀ500M
1Kꢀꢀ500M
1Kꢀꢀ500M
1Kꢀꢀ700M
1Kꢀ500M
1Kꢀꢀ700M
0.8
N/A
N/A
(.590)
(.197)
19+/-1.5ꢀ
(.748)ꢀ
5.0+/-1.5ꢀ
(.197)
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
25.4+/-1.5ꢀ
(1.0)ꢀ
5.0+/-1.5ꢀ
(.197)
1.2
5.5
N/A
24.0+/-1.5ꢀ
(.944)ꢀ
8.0+/-1.0ꢀ
(.314)ꢀ
2.0
5.5
available
available
available
39.0+/-1.5ꢀ
(1.50)
8.0+/-1.0ꢀ
(.314)ꢀ
3.0
10.0
15.0
22.5
32.0
40.0
48.0
52.0+/-1.5ꢀ
(2.04)
8.0+/-1.0ꢀ
(.314)
5.0
76.0+/-1.5ꢀ
(2.54)
9.0+/-1.0ꢀ
(0.354)
availableꢀonꢀ
request
7.5
102.0+/-1.5ꢀ
(4.01)
9.0+/-1.0ꢀ
(0.354)
10.0
12.0
15.0
N/A
N/A
N/A
127.0+/-1.5ꢀ
(5.00)
9.0+/-1.0ꢀ
(0.354)1.0
152.0+/-1.5ꢀ
(5.98)
9.0+/-1.0ꢀ
(0.354)
+ꢀ Customꢀdimensionꢀ&ꢀspecificationꢀavailableꢀuponꢀrequestꢀ
+ꢀ AboveꢀmentionedꢀElectricalꢀꢀspecificationꢀapplicableꢀforꢀ0.1MΩ ꢀ~ꢀꢀ700MΩꢀonlyꢀꢀ
+ꢀ Voltageꢀꢀrestrictedꢀbyꢀꢀꢀtheꢀratedꢀpowerꢀꢀꢀ
**ꢀ Vdc,ꢀVrmsꢀstandard.ꢀꢀꢀꢀꢀAndꢀꢀꢀatꢀꢀ1.2/50㎲ꢀꢀimpulseꢀ;ꢀꢀꢀstd.ꢀVoltageꢀxꢀ1.5ꢀtimesꢀavailableꢀ
ꢀ
Cylindrical High Voltage
HTE Resistors,Thicker film,Non-Inductive
SPECIFICATIONS
Resistance Tolerance :
DIMENSIONS [mm]
1% 2% 5% 10% ,and 0.5%..
B
C
And (from 1kΩ to 100MΩ ; 0.1%, 0.25%
special order available upon request, *but
some parts unable to special tolerance)
35 ± 5
A
Endurable Harsh to Environment
(Temperature ) :
-55ºC to +195°C , Max. broken temperature
on resistive of parts is 600℃ (for 70min.)
DERATING CURVE
Temperature Coefficient of
100ppm/°C standard referenced to 25°C,
from -25ºC to +125°C. ( 80ppm/°C and
Resistance:
ꢀ00
80
60
40
ꢁ0
special TCR upon request )
Overload/Voltage :
5 times rated power with applied voltage not
to exceed 1.5times maximum continuous
operating voltage for 5 seconds ΔR 0.5%
max.
Thermal Shock :
Mil-Std-202, Method- 107, Cond. C, ΔR
0.25% max.
0
ꢁ5
75
ꢀꢁ5
ꢀ75
ꢁꢁ5
Ambient-Temperature (˚C)
Load Life :
1.000 hours at rated power ΔR 0.7% max.
*ꢀRatedꢀpowerꢀꢀ,ꢀandꢀvoltageꢀofꢀꢀ%
A
PPLICATION GUIDE ; HTE SERIES
Moisture Resistance :
Mil-Std-202, Method 106, ΔR 0.4% max.
• Automated Test (ATE)
• Ozone Generating
Lead Material :
Tinned plated copper solsderable semi-
flexible axial wire.
• Medical (Imaging)
• Detectors
• Ion Source
• Nuclear Instrumentation
• Electron Beam
• Chromatography (Gas)
• Medical (Radiation Therapy)
Insulation Resistance :
10,000MΩ Min.
• Pulse Generators
• Surface Analysis
• C T , MRI
• Military , Radar ,Laser
,Plasma
Termination Cap of Material:
Tinned Cap.
• Measurements (High
Voltage)
Encapsulation :
Epoxy conformal.
• Electrophoresis
• Image Intensifier
• Surface Analysis
• Piezo. Focusing (Poling)
• High Voltage Dividers
• Stress Testing
* HV Capacitor Charging,
Discharging
Resistive Material :
Thicker Film.
• Electric Power Transmission
High Voltage
Contact method between Resistives and
termination Caps :
Individual Conductive Pads . So,called
"NCR" Non-contact resistance.
• Medical (Blood Analyzers)
• Corona Generators
• Klystron, Magnetron,
Microwave
• Multichannel Analyzers
cf.: The described specifications & dimensions subject to change without notice.
ꢀ
Willow Technologies Ltd. Shawlands Court, Newchapel Road, Lingfield, Surrey, RH7 6BL, United Kingdom.
ꢀ + 44 (0) 1342 834306 info@willow.co.uk
http://www.willow.co.uk
ꢀ
+ 44 (0) 1342 835234
ꢀ
ꢀ
ꢁ
相关型号:
HTE391.02MOHMS1%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1020000ohm, 10000V, 1% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.05KOHMS1%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1050ohm, 10000V, 1% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.13KOHMS1%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1130ohm, 10000V, 1% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.13MOHMS1%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1130000ohm, 10000V, 1% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.18MOHMS1%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1180000ohm, 10000V, 1% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.1KOHMS1%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1100ohm, 10000V, 1% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.1KOHMS2%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1100ohm, 10000V, 2% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.1KOHMS3%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1100ohm, 10000V, 3% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.1MOHMS3%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1100000ohm, 10000V, 3% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.1MOHMS5%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1100000ohm, 10000V, 5% +/-Tol, -100,100ppm/Cel
VISHAY
HTE391.3KOHMS1%
Fixed Resistor, Metal Glaze/thick Film, 3W, 1300ohm, 10000V, 1% +/-Tol, -100,100ppm/Cel
VISHAY
©2020 ICPDF网 联系我们和版权申明