T3DSO1302A [TELEDYNE]
Debug with Confi dence 100 MHz â 350 MHz;型号: | T3DSO1302A |
厂家: | TELEDYNE TECHNOLOGIES INCORPORATED |
描述: | Debug with Confi dence 100 MHz â 350 MHz |
文件: | 总16页 (文件大小:1022K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T3DSO1000ꢀ/ꢀT3DSO1000A Data Sheet
Oscilloscopes
Debug with Confidence
100 MHz – 350 MHz
Tools for Improved Debugging
●
ꢁCapture more time and show more waveform detail.
ꢁExtract results from waveforms and measurements.
Long Capture – Up to 28 Mpts interleaved.
●
●
●
●
●
Math and Measure – 7 basic math functions plus FFT
and 38 automatic measurement parameters.
Save data for external analysis and screen images
for reports.
Connectivity – USB for mass storage, printing and
PC control, plus LAN for fast data transfer.
Debug serial buses directly in your Oscilloscope.
Serial Bus Trigger and Decode – I2C, SPI, UART,
RS232, CAN, LIN.
Replay the changing waveform history.
Waveform Sequence Recorder – record and play back
up to 80,000 waveforms.
Optional MSO – 16 Digital Channels
Add mixed signal debugging to your Oscilloscope.
(4 channel and A series only).
Key Specifications
Bandwidth
Channels
Memory
100 MHz, 200, 350 MHz
2 or 4
up to 14 Mpts/Ch (28 Mpts interleaved)
up to 1 GS/s / 2 GS/s interleaved
7" Bright TFT LCD (800 x 480)
USB Host, USB Device, LAN
Sample Rate
Display
Connectivity
PRODUCT OVERVIEW
T3DSO1102: 2 Channel 100 MHz
T3DSO1104: 4 Channel 100 MHz
T3DSO1202A: 2 Channel 200 MHz
T3DSO1204: 4 Channel 200 MHz
T3DSO1302A: 2 Channel 350 MHz
Teledyne Test Tools new T3DSO1000 Oscilloscopes feature two channel and four channel models. The two channel
models are available with 100 MHz, 200 MHz and 350 MHz analog bandwidths, a single ADC with up to 2 GSa/s
maximum sample rate, and memory up to 28 Mpts. The four channel scope is available in 100 and 200 MHz models
and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are enabled, each channel
has sample rate of 500 MSa/s, or 1 GS/s for the A series, and a standard record length of 7 Mpts, or 14 Mpts for the
A Series. When only a single channel per ADC is active, the maximum sample rate and the maximum record length are
doubled.
For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.
The T3DSO1000 series employs a new generation of high
speed display technology that provides excellent signal
clarity, fidelity and performance. The system noise floor is
also lower than similar products in the industry. It comes
with a minimum vertical input range of 500 uV/div, an
innovative digital trigger system with high sensitivity and
low jitter, and a waveform capture rate of 400,000 frames/
sec (sequence mode). The T3DSO1000 also employs
a 256-level intensity grading display function and a color
temperature display mode not found in other models in
this class. Teledyne Test Tools latest oscilloscope offering
supports multiple powerful triggering modes including
serial bus triggering. Serial bus decoding for IIC, SPI, UART,
CAN, LIN bus types is included. The models also include
History waveform recording, and sequential triggering
that enable extended waveform recording and analysis.
Another powerful addition is the new 1 million point
FFT math function that gives the T3DSO1000 very high
frequency resolution when observing signal spectra. The
new digital design also includes a hardware co-processor
that delivers measurements quickly and accurately
without slowing acquisition and front-panel response.
The features and performance of Teledyne Test Tools
T3DSO1000 family cannot be matched in this price class.
The four channel and A series includes even more
functions, including: searching and navigating, on-screen
Bode plot, 16 digital channels (Option), an external USB
powered 25 MHz AWG module (Option), a USB WIFI
adapter (Option), and an embedded application that
allows remote control via web browser.
●
Intelligent trigger: Edge, Slope, Pulse Width, Window,
Runt, Interval, Time out (Dropout), Pattern
Key Features
●
100 MHz, 200 MHz and 350 MHz bandwidth models
●
Serial bus triggering and decoding (Standard), supports
protocols IIC, SPI, UART, RS232, CAN, LIN
●
Two channel series have one ADC, four channel series
have two ADCs. When all channels are enabled, each
channel has a maximum sample rate of 500 MSa/s
(1 Gsa/s for the A series). When a single channel
per ADC is active, it has sample rate of 1 GSa/s
(2 Gsa/s for the A Series)
●
Video trigger, supports HDTV
●
Low background noise with voltage scales from
500 μV/div to 10 V/div
●
10 types of one-button shortcuts, supports Auto Setup,
Default, Cursors, Measure, Roll, History, Display/Persist,
Clear Sweep, Zoom and Print Segmented acquisition
(Sequence) mode, divides the maximum record length
into multiple segments (up to 80,000), according to
trigger conditions set by the user, with a very small dead
time segment to capture the qualifying event.
●
The newest generation of high speed display
technology
Waveform capture rate up to 100,000 wfm/s
(normal mode), and 400,000 wfm/s (sequence
mode)
›
Supports 256-level intensity grading and color
display modes Record length up to 28 Mpts
›
●
History waveform record (History) function, maximum
recorded waveform length is 80,000 frames.
Digital trigger system
›
2
Models and key Specification
Model
T3DSO1102
T3DSO1104
T3DSO1204
T3DSO1202A
T3DSO1302A
Bandwidth
100 MHz
200 MHz
200 MHz
350 MHz
SamplingRate (Max.)
Two channel series have a single 1 GSa/s The A series has a single 2 GSa/s ADC.
ADC, four channel series have two 1 GSa/s When both channels are enabled, each
ADCs. When all channels are enabled, each channel has a maximum sample rate of
channel has a maximum sample rate of
1 GSa/s. When a single channel is active,
500 MSa/s. When a single channel per pair that channel has sample rate of 2 GSa/s
is active, that channel has sample rate of
1 GSa/s
Channels
4, no EXT (T3DSO1104 and T3DSO1204 four channel series)
2+EXT (T3DSO1102, T3DSO1202A and T3DSO1302A two channel series)
Memory Depth (Max.)
7 Mpts/CH (not interleave mode);
14 Mpts/CH (interleave mode)
14 Mpts/CH (not interleave mode);
28 Mpts/CH (interleave mode)
Waveform Capture Rate (Max.)
Trigger Type
100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
IIC, SPI, UART/RS232, CAN, LIN
Serial Trigger and decoder (Standard)
16 Digital Channels
Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH
(Option not available on the T3DSO1102)
USB AWG module
One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts
(Option not available on the T3DSO1102)
Bode plot
(Not available on the T3DSO1102)
Minimum start frequency of 10 Hz, minimum scan bandwidth of 500 Hz, maximum
scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth),
500 maximum scan frequency points
USB WIFI adapter
802.11b/g/b, WPA-PSK, the adapter must be purchased separately by the scope user
(Option not available on the T3DSO1102) (TP-Link TL-WN725N)
I/O
USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Teledyne Test Tools MSO)
Probe (Std)
Display
Weight
2/4 pcs passive probe
2 pcs passive probe
7 inch TFT-LCD (800 x 480)
All models except T3DSO1102: Without package 2.6 Kg; With package 3.8 Kg
T3DSO1102: Without package 2.5 Kg; With package 3.5 Kg
●
●
Automatic measurement function for 38 parameters
as well as Measurement Statistics, Zoom, Gating,
Math, History and Reference functions
Search and navigate1)
USB AWG module1)
USB WIFI adapter1)
Web Browser based control1)
●
●
●
●
●
●
●
1 Mpts FFT
Math and measurement functions use all sampled
data points (up to 28 Mpts)
Large 7 inch TFT-LCD display with 800 * 480 resolution
Multiple interface types: USB Host, USB Device
(USB-TMC), LAN, Trigger Out
●
●
Math functions (FFT, addition, subtraction,
multiplication,division, integration, differential, square
root)
●
●
Supports SCPI remote control commands
Supports Multi-language display and embedded
online help
Preset key can be customized for user settings or
factory “defaults”
●
●
●
●
Security Erase mode
High Speed hardware based Pass/ Fail function
MSO, 16 digital channels1)
Bode plot1)
1)
Not available on the T3DSO1102.
3
FUNCTION & CHARACTERISTICS
7 inch TFT-LCD display and
10 one-button menus
When all channels are enabled, each channel
has a maximum sample rate of up to 1 GSa/s
(depending on the model)
When a single channel per pair is active,
that channel has sample rate of up to 2 GSa/s
(depending on the model)
Front panel of T3DSO1104, T3DSO1202A,
T3DSO1204, T3DSO1302A
Front panel of T3DSO1102
●
7-inch TFT-LCD display with 800 * 480 resolution
Most commonly used functions are accessible using
10 different one-button operation keys: Auto Setup,
Default, Cursor, Measure, Roll, History, Persist, Clear
Sweep, Zoom, Print
The four channel series has two 1 GSa/s ADC chips
(channel 1 and 2 share one, channel 3 and 4 share
another), so that each channel can achieve sample rates
up to 500 MSa/s and work on bandwidths of 200 MHz
when all channels are enabled.
●
●
Record Length of Up to 28 Mpts
depending on model and channels
(single channel/pair mode).
Waveform Capture Rate
Up to 400,000 wfm/s
With a waveform capture rate of up to 400,000 wfm/s
(sequence mode), the oscilloscope can easily capture
the unusual or low-probability events.
Using hardware-based Zoom technologies and max record
length of up to 28 Mpts, users are able to over-sample to
capture longer time periods at higher resolution and use
the zoom feature to see more details within each signal.
4
256-Level Intensity Grading and
Color Temperature Display
History Waveforms (History) Mode and
Segmented Acquisition (Sequence)
Playback the latest triggered events using the history
function. Segmented memory collection will store trigger
events into multiple (Up to 80,000) memory segments,
each segment will store triggered waveforms and
timestamp each frame.
New display technology provides for fast refresh rates.
The resulting intensity-graded trace is brighter for events
that occur with more frequency and dims when the
events occur with less frequency.
True measurement to 14 M points or
28 M points depending on the model
The color temperature display is similar to the intensity-
graded trace function, but the trace occurrence is
represented by different colors (color “temperature”) as
opposed to changes in the intensity of one color. Red
colors represents the more frequent events, while blue is
used to mark points that occur lest frequently.
At any one timebase, T3DSO1000 can measure using
all acquired sample points. This ensures the accuracy of
measurements while the math coprocessor decreases
measurement time and increases ease-of-use.
Serial Bus Decoding Function (Standard)
Gate and Zoom Measurement
T3DSO1000 displays the decoding through the
events list. Bus protocol information can be quickly
and intuitively displayed in a tabular format.
Through Gate and Zoom measurement, the user can
specify an arbitrary interval of waveform data analysis
and statistics. This helps avoid measurement errors
that can be caused by invalid or extraneous data, greatly
enhancing the measurements’ validity and flexibility.
5
FUNCTION & CHARACTERISTICS
1 M points FFT
16 Digital Channels/MSO
(Option not available on the T3DSO1102)
The math co-processor enables FFT analysis of incoming
signals using up to 1 M samples per waveform. This
provides high frequency resolution with a fast refresh
rate. The FFT function also supports a variety of window
functions so that it can adapt to different spectrum
measurement needs.
16 digital channels enables users to acquire and trigger on
the waveforms then analyze the pattern, simultaneously
with one instrument. Color coded logic levels clearly
differentiate high and low states.
Hardware-Based High Speed
Pass/Fail function
Search and Navigate
(not available on the T3DSO1102)
The T3DSO1000 utilizes a hardware-based Pass/Fail
function, performing up to 40,000 Pass/Fail decisions
each second. Easily generate user defined test templates
provide trace mask comparison making it suitable for
long-term signal monitoring or automated production
line testing.
Customizable Default Key
The T3DSO1000 series can search events specified
by the user in a frame. It can also navigate by time
(delay position) and historical frames. Search and
Navigate is not available on the T3DSO1102.
The current parameters of the oscilloscope can be
preset to Default Key through the Save menu.
6
Bode Plot (not available on the T3DSO1102)
USB 25 MHz AWG Module
(Option not available on the T3DSO1102)
The T3DSO1000 series supports an optional USB 25 MHz
function/arbitrary waveform generator that is operated
from the USB host connection. Functions include
Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in
waveforms. The arbitrary waveforms can be accessed
and edited by the Teledyne Test Tools PC software.
Option not available for the T3DSO1102.
Complete Connectivity
Back panel of
T3DSO1104,
T3DSO1202A,
T3DSO1204,
T3DSO1302A
T3DSO1000 can control the USB AWG module, control an
independent Teledyne Test Tools T3AFG instrument, scan
an object’s amplitude and phase frequency response,
and display the data as a Bode Plot. It can also show
the result lists, and export the data to a USB disk. Not
available for the T3DSO1102.
USB WiFi Adapter
(Option not available on the T3DSO1102)
Back panel of
T3DSO1102
T3DSO1000 supports USB Host, USB Device (USB-TMC),
LAN(VXI-11), Pass/Fail and Trigger Out.
Web control (not available on the T3DSO1102)
USB WiFi Adapter
WiFi control of instrumentation can provide a convenient
and safe method of configuring and collecting data.
This new feature works with a Teledyne Test Tools
approved WiFi adapter to provide wireless control and
communications with Teledyne Test Tools 4 channel
scopes. Option not available for the T3DSO1102.
The approved adapter is the TP-Link TL-WN725N (not
supplied).
With the new embedded web server, users can control
the Oscilloscopes from a simple web page. This provides
remote troubleshooting and monitoring capabilities.
7
SPECIFICATIONS
Model
T3DSO1102, T3DSO1104, T3DSO1204
T3DSO1202A, T3DSO1302A
Acquire System
Sampling Rate
1 GSa/s (single channel/pair),
500 MSa/s (two channels/pair)
2 GSa/s (single channel),
1 GSa/s (two channels)
Memory Depth
Peak Detect
Max 14 Mpts/Ch (single channel/pair), 7
Mpts/Ch (two channels/pair)
2 nsec (Four channel series)
4 nsec (Two channel series)
Max 28 Mpts/Ch (single channel),
14 Mpts/Ch (two channels)
1 nsec
Average
Eres
Waveform interpolation
Averages: 4, 16, 32, 64, 128, 256, 512, 1024
Enhance bits: 0.5, 1.5, 2, 2.5, 3; Selectable
Sin(x)/x, Linear
Input
Channels
4, no EXT (four channel series)
2+EXT (two channel series)
2+EXT
Coupling
DC, AC, GND
Impedance
DC: (1 MΩ ± 2ꢀ%) || (15 pF ± 2 pF)
(Four channel series)
DC: (1 MΩ ± 2ꢀ%) || (18 pF ± 2 pF)
DC: (50 Ω ± 2ꢀ%)
DC: (1 MΩ ± 2ꢀ%) || (18 pF ± 2 pF)
(Two channel series)
Max.Input voltage
1 MΩ ≤ 400 Vpk (DC + Peak AC <= 10 kHz)
1 MΩ ≤ 400 Vpk (DC + Peak AC <= 10 kHz)
DC: 50 Ω: < 5V rms
CH to CH Isolation
Probe attenuation
DC-Max BW > 40 dB
0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X……1000X, 2000X, 5000X, 10000X
Vertical System
Bandwidth (–3 dB )
200 MHz (T3DSO1204) / T3DSO1202A)
350 MHz (T3DSO1302A)
100 MHz (T3DSO1102 / T3DSO1104)
Vertical Resolution
8-bit
Vertical Scale (Probe 1X)
Offset Range (Probe 1X)
500 μV/div – 10 V/div (1-2-5 sequence )
500 μV – 118 mV: ± 2 V
120 mV – 1.18 V: ± 20 V
1.2 V – 10 V: ± 200 V
500 μV – 100 mV: ± 2 V
102 mV – 1 V: ± 20 V
1.02 V – 10 V: ± 200 V
Bandwidth Limit
20 MHz ± 40ꢀ%
20 MHz ± 40ꢀ%
Bandwidth Flatness
DC – 10ꢀ% (BW): ± 1 dB
10ꢀ% – 50ꢀ% (BW): ± 2 dB
50ꢀ% – 100ꢀ% (BW): + 2 dB/–3 dB
DC – 60ꢀ% (BW): ± 1 dB
60ꢀ% – 100ꢀ% (BW): + 1 dB/–3 dB
Low Frequency Response (AC –3 dB) ≤ 10 Hz (at input BNC)
≤ 2 Hz (at input BNC)
Noise
ST-DEV ≤ 0.5 division (< 1 mV/div)
ST-DEV ≤ 0.2 division (< 2 mV/div)
ST-DEV ≤ 0.1 division (≥ 2 mV/div)
SFDR including harmonics
DC Gain Accuracy
≥ 35 dB
≤ꢀ± 3.0%: 5 mV/divꢀ–ꢀ10 V/div
≤ꢀ± 4.0%: ≤ 2 mV/div
Offset Accuracy
Risetime
± (1ꢀ% * Offset + 1.5ꢀ% * 8 * div + 2 mV): ≥ 2 mV/div
± (1ꢀ% * Offset + 1.5ꢀ% * 8 * div + 500 uV): ≤ 1 mv/div
Typical 1.0 ns (T3DSO1302A)
Typical 1.8 ns (T3DSO1202A / T3DSO1204)
Typical 3.5 ns (T3DSO1102 / T3DSO1104)
Overshoot (500 ps Pulse)
< 10ꢀ%
Horizontal System
Timebase Scale
1.0 ns/div –100 s/div
500 ps/div – 100 s/div
Channel Skew
< 100 ps
Waveform Capture Rate
Intensity grading
Display Format
Timebase Accuracy
Roll Mode
Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
256 Levels
Y-T, X-Y, Roll
± 25 ppm
50 ms/div –100 s/div (1-2-5 step)
8
Model
T3DSO1102, T3DSO1104, T3DSO1204
T3DSO1202A, T3DSO1302A
Trigger System
Trigger Mode
Auto, Normal, Single
Trigger Level
Internal: ± 4.5 div from the center of the screen
EXT: ± 0.6 V (Two channel series)
EXT/5: ± 3 V (Two channel series)
Holdoff Range
80 ns – 1.5 s
Trigger Coupling
AC
DC
LFRJ
HFRJ
Noise RJ
Coupling Frequency Response
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Blocks the DC component and attenuates the low-frequency components below 2 MHz
HFRJ: Attenuates the high-frequency components above 1.2 MHz
Coupling Frequency Response
(EXT)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates
signals below 20 Hz
DC: Passes all components of the signal
AC: Blocks DC components and attenuates
signals below 10 Hz
LFRJ: Blocks the DC component and
attenuates the low-frequency components
below 7 KHz
HFRJ: Attenuates the high-frequency
components above 160 KHz
LFRJ: Blocks the DCcomponent and
attenuates the low-frequency components
below 6 KHz
HFRJ: Attenuates the high-frequency
components above 200 KHz
Trigger Accuracy (Typical)
Trigger Sensitivity
Internal: ± 0.2 div
EXT (Two channel series): ± 0.4 div
DC – Max BW 0.6 div
EXT (Two channel series): 200 mVpp DC – 10 MHz
300 mVpp 10 MHz – BW frequency
EXT/5 (Two channel series): 1 Vpp DC – 10 MHz
1.5 Vpp 10 MHz – BW frequency
Trigger Jitter
< 100 ps
Trigger Displacement
Pre-Trigger: 0 – 100ꢀ% Memory
Delay Trigger: 0 to 10,000 div
Edge Trigger
Slope
Rising, Falling, Rising & Falling
Source
All channels/ EXT/ (EXT/5)/ AC Line (Two channel series)
All channels/ AC Line (Four channel series)
Slope Trigger
Slope
LimitRange
Source
TimeRange
Resolution
Rising, Falling
< , > , < > , > <
All channels
2 ns – 4.2 s
1 ns
Pulse Trigger
Polarity
Limit Range
Source
Pulse Range
Resolution
+wid , -wid
< , > , < > , > <
All channels
2 ns ~ 4.2 s
1 ns
Video Trigger
Signal Standard
NTSC, PAL, 720p/50, 720p/60, 1080p/50, 1080p/60, 1080i/50, 1080i/60, Custom
Source
Sync
Trigger condition
All channels
Any, Select
Line, Field
9
SPECIFICATIONS
Window Trigger
Window Type
Source
Absolute, Relative
All channels
Interval Trigger
Slope
Limit Range
Source
Time Range
Resolution
Rising, Falling
< , > , < > , > <
All channels
2 ns ~ 4.2 s
1 ns
Dropout Trigger
Timeout Type
Source
Slope
Time Range
Resolution
Edge, State
All channels
Rising, Falling
2 ns ~ 4.2 s
1 ns
Runt Trigger
Polarity
Limit Range
Source
Time Range
Resolution
+wid , -wid
< , > , < > , > <
All channels
2 ns ~ 4.2 s
1 ns
Pattern Trigger
Pattern Setting
Logic
Source
Limit Range
Time Range
Resolution
Invalid, Low, High
AND, OR, NAND, NOR
All channels
< , > , < > , > <
2 ns ~ 4.2 s
1 ns
Serial Trigger
I2C Trigger
Condition
Start, Stop, Restart, No Ack, EEPROM, 7 bits Address & Data, 10 bits Address & Data,
Data Length
Source (SDA/SCL)
Data format
All channels
Hex
Limit Range
EEPROM: =, >, <
Data Length
EEPROM: 1 byte
Addr & Data: 1 ~ 2 byte
Data Length: 1 ~ 12 byte
R/W bit
Addr & Data: Read, Write, Don’t care
SPI Trigger
Condition
Data
Source (CS/CL/Data)
Data format
Data Length
Bit Value
All channels
Binary
4 ~ 96 bit
0, 1, X
Bit Order
LSB, MSB
10
UARTꢀ/ꢀRS232 Trigger
Condition
Start, Stop, Data, Parity Error
Source (RX/TX)
Data format
Limit Range
Data Length
Data Width
Parity Check
Stop Bit
All channels
Hex
=, >, <
1 byte
5 bit, 6 bit, 7 bit, 8 bit
None, Odd, Even
1 bit, 1.5 bit, 2 bit
Idle Level
High, Low
Baud (Selectable)
(Custom)
600/1200/2400/4800/9600/19200/38400/57600/115200 bit/s
300 bit/s ~ 5,000,000 bit/s
CAN Trigger
Condition
Start, Remote, ID, ID + Data, Error
Source
All channels
ID
STD (11 bit), EXT (29 bit)
Data Format
Data Length
Baud Rate (Selectable)
LIN Trigger
Condition
Hex
1~2 byte
5 k/10 k/20 k/50 k/100 k/125 k/250 k/500 k/800 k/1 M bit/s
Break, Frame ID, ID+Data, Error
Source
All channels
ID
1 byte
Data Format
Data Length
Baud Rate (Selectable)
Baud Rate (Custom)
Hex
1 ~ 2 byte
600/1200/2400/4800/9600/19200 bit/s
300 bit/s ~ 20 kbit/s
Serial Decoder
I2C Decoder
Signal
SCL, SDA
Address
Threshold
List
7 bits, 10 bits
-4.5 ~ 4.5 div
1 ~ 7 lines
SPI Decoder
Signal
SCL,MISO, MOSI, CS * NOTE 2 channel scopes can only use 2 signal identifiers
Edge Select
Idle Level
Bit Order
Rising, Falling
Low, High
MSB, LSB
Threshold
List
-4.5 ~ 4.5 div
1 ~ 7 lines
UARTꢀ/ꢀRS232 Decoder
Signal
RX, TX
Data Width
Parity Check
Stop Bit
Idle Level
Threshold
List
5 bit, 6 bit, 7 bit, 8 bit
None, Odd, Even
1 bit, 1.5 bit, 2 bit
Low, High
-4.5 ~ 4.5 div
1 ~ 7 lines
CAN Decoder
Signal
CAN_H, CAN_L
Source
Threshold
List
CAN_H, CAN_L, CAN_H-CAN_L
-4.5 ~ 4.5 div
1 ~ 7 lines
LIN Decoder
LIN Specification Package Revision
Threshold
List
Ver1.3, Ver2.0
-4.5 ~ 4.5 div
1 ~ 7 lines
11
SPECIFICATIONS
Measurement
Source
All channels, All channels in Zoom, Math, All References, History
Display 5 measurements at the same time
Screen region, Gate region
Number of Measurements
Measurement Range
Measurement Parameters (38 Types)
Vertical (Voltage)
Max
Highest value in input waveform
Min
Lowest value in input waveform
Pk-Pk
Ampl
Difference between maximum and minimum data values
Difference between top and base in a bimodal signal, or between max and
min in an unimodal signal
Top
Base
Value of most probable higher state in a bimodal waveform
Value of most probable lower state in a bimodal waveform
Average of all data values
Average of data values in the first cycle
Standard deviation of all data values
Mean
Cmean
Stdev
Cstd
VRMS
Crms
FOV
FPRE
ROV
RPRE
Level@X
Period
Freq
Standard deviation of all data values in the first cycle
Root mean square of all data values
Root mean square of all data values in the first cycle
Overshoot after a falling edge; (base-min)/Amplitude
Overshoot before a falling edge; (max-top)/Amplitude
Overshoot after a rising edge; (max-top)/Amplitude
Overshoot before a rising edge; (base-min)/Amplitude
the voltage value of the trigger point
Period for every cycle in waveform at the 50ꢀ% level, and positive slope
Frequency for every cycle in waveform at the 50ꢀ% level, and positive slope
Width measured at 50ꢀ% level and positive slope
Width measured at 50ꢀ% level and negative slope
Duration of rising edge from 10ꢀ–ꢀ90ꢀ%
Horizontal( Time)
+Wid
-Wid
Rise Time
Fall Time
Bwid
Duration of falling edge from 90ꢀ–ꢀ10ꢀ%
Time from the first rising edge to the last falling edge, or the first falling edge
to the last rising edge at the 50ꢀ% crossing
+Dut
-Dut
Ratio of positive width to period
Ratio of negative width to period
Delay
Time from the trigger to the first transition at the 50ꢀ% crossing
Time@Level Time from the trigger to each rising edge at the 50ꢀ% crossing.
When Statistics is Off, it shows the time from the trigger to the last rising
edge at the 50ꢀ% crossing.
When Statistics is On, it shows the Current, Mean, Min, Max, Standard
Deviation of time from the trigger to each rising edge at the 50ꢀ% crossing
in multiple frames (number = Count).
Delay
Phase
FRR
FRF
FFR
FFF
LRR
LRF
LFR
LFF
Calculate the phase difference between two edges
Time between the first rising edges of the two channels
Time from the first rising edge of channel A to the first falling edge of channel B
Time from the first falling edge of channel A to the first rising edge of channel B
Time from the first falling edge of channel A to the first falling edge of channel B
Time from the first rising edge of channel A to the last rising edge of channel B
Time from the first rising edge of channel A to the last falling edge of channel B
Time from the first falling edge of channel A to the last rising edge of channel B
Time from the first falling edge of channel A to the last falling edge of channel B
Time of source A edge minus time of nearest source B edge
Skew
Cursors
Manual : Time X1, X2, (X1-X2), (1/ΔT) Voltage Y1, Y2, (Y1-Y2)
Track: Time X1, X2, (X1-X2)
Statistics
Counter
Current, Mean, Min, Max, Stdev, Count
Hardware 6 bit counter( channels are selectable)
12
Math Function
Operation
+ , - , * , / , FFT , d/dt , ∫dt , √
FFT window
Rectangular, Blackman, Hanning, Hamming, Flattop
FFT display
Number of Decoders
Full Screen, Split, Exclusive
2
USB AWG Module (Not available on the T3DSO1102)
Channel
1
Max. Output Frequency
Sampling Rate
Frequency Resolution
Frequency Accuracy
Vertical Resolution
AmplitudeRange
25 MHz
125 MSa/s
1 μHz
± 50 ppm
14-bits
-1.5 ~ +1.5 V (50 Ω)
-3 ~ +3 V (High-Z)
Waveform Type
Output impedance
Protection
Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms
50 Ω ± 2ꢀ%
Over-Voltage Protection, Current-Limiting Protection
Sine
Frequency
1 μHz ~ 25 MHz
Offset Accuracy (10 kHz)
Amplitude flatness (10 kHz, 5 Vpp)
SFDR
± (1ꢀ% * Offset Setting Value + 1 mVpp)
± 0.3 dB
DC ~ 1 MHz -60 dBc
1 MHz ~ 5 MHz -55 dBc
5 MHz ~ 25 MHz -50 dBc
HD
DC ~ 5 MHz -50 dBc
5 MHz ~ 25 MHz -45 dBc
Square/Pulse
Frequency
Duty Cycle
1 μHz ~ 10 MHz
1ꢀ% ~ 99ꢀ%
Rise/Fall time
Overshoot (1 kHz,1 Vpp, Typical)
Pulse Width
< 24 ns (10ꢀ% ~ 90ꢀ%)
< 3ꢀ% (typical 1 kHz, 1 Vpp)
> 50 ns
Jitter
< 500 ps + 10 ppm
Ramp
Frequency
1 μHz ~ 300 kHz
Linearity (Typical)
Symmetry
< 0.1ꢀ% of Pk-Pk (Typical, 1 kHz, 1 Vpp, 100ꢀ% Symmetry)
0ꢀ% ~ 100ꢀ% (Adjustable)
DC
Offset range
± 1.5 V (50 Ω)
± 3 V (High-Z)
Accuracy
± (|offset| * 1ꢀ% + 3 mV)
Noise
Bandwidth
> 25 MHz (-3 dB)
Arbitrary Wave
Frequency
1 μHz ~ 5 MHz
16 kpts
125 MSa/s
Wave Length
Sampling Rate
Waveform Entry
EasyScope and USB-Stick
13
SPECIFICATIONS
Digital Channels (Not available on the T3DSO1102)
No. of Channels
Max. Sampling Rate
Memory Depth
Min. Detectable Pulse Width
Level Group
16
1 GSa/s
14 Mpts/CH
4 ns
D0~D7, D8~D15
Level Range
-8 V ~ 8 V
Logic Type
TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom
Skew[2]
D0~D15: ±1 sampling interval
Analog To Digital: ± (1 sampling interval +1 ns)
I/O
Standard
Pass/Fail
USB Host, USB Device, LAN, Pass/Fail, Trigger Out
3.3 V TTL Output
Display (Screen)
Display Type
Display Resolution
Display Color
Contrast (Typical)
Backlight
7-inch TFT LCD
800 × 480
24 bit
500:1
300 nit
Range
8 x 14 divisions
Display (Waveform)
Display Mode
Persist Time
Color Display
Screen Saver
Language
Dot, Vector
Off, 1 Sec, 5 Sec, 10 Sec, 30 Sec, Infinite
Normal, Color
1 min, 5 min, 10 min, 30 min, 1 hour, Off
Simplified Chinese, Traditional Chinese, English, French, Japanese, Korean, German,
Russian, Italian, Portuguese
Environments
Temperature
Operating: 10 ~ +40
Non-operating: -20 ~ +60
Humidity
Operating: 85ꢀ% RH, 40 Deg C, 24 hours
Non-operating: 85ꢀ% RH, 65 Deg C, 24 hours
Height
Operating: ≤ 3000 m
Non-operating: ≤ 15,266 m
Electromagnetic Compatibility
2004/108/EC)
Execution Standard EN 61326-1:2006
EN 61000-3-2:2006 + A2:2009, EN 61000-3-3:2008
Safety
2006/95/EC
Execution Standard EN 61010-1:2010 / EN 61010-2-030:2010
Power Supply
Input Voltage
Frequency
Power
100 ~ 240 VAC, CAT II, Auto selection
50/60/400 Hz
50 W Max
Mechanical (T3DSO1104, T3DSO1204, T3DSO1202A, T3DSO1302A)
Dimensions
Length: 312 mm / Width: 132.6 mm / Height: 151 mm
Weight
N.W: 2.6 kg; G.W: 3.8 kg
Mechanical (T3DSO1102)
Dimensions
Weight
Length: 312 mm / Width: 134 mm / Height: 150 mm
N.W: 2.5 Kg; G.W: 3.5 Kg
All T3DSO1000 Series Oscilloscopes come with a 3 year return to Teledyne LeCroy warranty.
14
Probes and Accessories
Probe
Model
Picture
Description
Passive Probes
(T3DSO1102,
T3DSO1104,
T3DSO1202A,
T3DSO1204)
T3PP300
Passive Probe, Bandwidth: 300 MHz
Passive Probes
(T3DSO1302A)
T3PP350
Passive Probe, Bandwidth: 350 MHz
USB AWG Module
T3DSO1000-
FGMOD
Output Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms.
The arbitrary waveforms can be accessed and edited by the EasyScope
PC software
Ordering information
Product Name
T3DSO1102 100 MHz Two Channels
T3DSO1104 100 MHz Four Channels
T3DSO1202A 200 MHz Two Channels
T3DSO1204 200 MHz Four Channels
T3DSO1302A 350 MHz Two Channels
USB Cable -1
Quick Start -1
Passive Probe -4 / 2
Certification -1
Power Cord -1
Standard Accessories
Optional Accessories
16 Channel MSO Software
T3DSO1000-MSO or T3DSO1000A-MSO
(Not available for T3DSO1102)
16 Channel Logic Analyzer Lead
(Not available for T3DSO1102)
T3DSO1000-LS
(Requires T3DSO1000-MSO or
T3DSO1000A-MSO Software)
AWG Software (Not available for T3DSO1102)
T3DSO1000-FG or T3DSO1000A-FG
USB AWG Module Hardware
(Not available for T3DSO1102)
T3DSO1000-FGMOD
(Requires T3DSO1000-FG or
T3DSO1000A-FG)
WIFI Software (Not available for T3DSO1102)
T3DSO1000-WIFI or T3DSO1000A-WIFI
Does not include the TP-Link TL-WN725N, see below
For Wi-Fi support the T3DSO1000-WIFI/T3DSO1000A-WIFI option is required and the TP-Link TL-WN725N. The TP-Link
TL-WN725N is NOT supplied as part of the T3DSO1000-WIFI/T3DSO1000A-WIFI option. The TP-Link TL-WN725N is not
available through Teledyne Test Tools and should be purchased separately.
15
ABOUT TELEDYNE TEST TOOLS
Company Profile
Teledyne LeCroy is a leading provider of oscilloscopes, protocol
analyzers and related test and measurement solutions that
enable companies across a wide range of industries to design
and test electronic devices of all types. Since our founding
in 1964, we have focused on creating products that improve
productivity by helping engineers resolve design issues
faster and more effectively. Oscilloscopes are tools used by
designers and engineers to measure and analyze complex
electronic signals in order to develop high-performance
systems and to validate electronic designs in order to improve
time to market.
Teledyne LeCroy
(US Headquarters)
700 Chestnut Ridge Road
Chestnut Ridge, NY. USA 10977-6499
The Teledyne Test Tools brand extends the Teledyne LeCroy
product portfolio with a comprehensive range of test
equipment solutions. This new range of products delivers
a broad range of quality test solutions that enable engineers
to rapidly validate product and design and reduce time-to-
market. Designers, engineers and educators rely on Teledyne
Test Tools solutions to meet their most challenging needs for
testing, education and electronics validation.
Phone:
Fax Sales:
800-553-2769 or 845-425-2000
845-578-5985
Phone Support: 1-800-553-2769
Email Sales:
contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com
Web Site:
http://teledynelecroy.com/
World wide support contacts can be found at:
https://teledynelecroy.com/support/contact
Location and Facilities
World wide instrument service can be found at:
https://teledynelecroy.com/support/service.aspx
Headquartered in Chestnut Ridge, New York, Teledyne
Test Tools and Teledyne LeCroy has sales, service and
development subsidiaries in the US and throughout
Europe and Asia. Teledyne Test Tools and Teledyne LeCroy
products are employed across a wide variety of industries,
including semiconductor, computer, consumer electronics,
education, military/aerospace, automotive/industrial, and
telecommunications.
RoHS and WEEE information can be found at:
https://teledynelecroy.com/support/rohs.aspx
Teledyne LeCroy
(European Headquarters)
Teledyne LeCroy GmbH
Im Breitspiel 11c
D-69126 Heidelberg, Germany
Distributed by:
Phone:
+49 6221 82700
Fax:
+49 6221 834655
Phone Service: +49 6221 8270 85
Phone Support: +49 6221 8270 28
Email Sales:
contact.gmbh@teledynelecroy.com
Email Service: service.gmbh@teledynelecroy.com
Email Support: tlc.t3.appsupport.eu@teledyne.com
Web Site:
http://teledynelecroy.com/
teledynelecroy.com
© 2019 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product brand or brand names are trademarks or requested trademarks of their respective holders.
T3 stands for Teledyne Test Tools.
23sept19
相关型号:
T3EP-1ST-05-3FFP
Miniature diaphragm pumpsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SENSORTECHNIC
T3EP-1ST-08-1SNB
Miniature diaphragm pumpsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SENSORTECHNIC
T3F-12B15-04AB-146
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B15-04SA
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B15-05PA-146
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B15-15SN-146
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B15-97PN-105
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B15-97SE-105
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B17-02BC-146
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B17-02BE-146
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B17-02SC-146
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
T3F-12B17-06AD
MIL Series ConnectorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
©2020 ICPDF网 联系我们和版权申明