TMXAP46 [TEMEX]
SAW Filter, 1 Function(s), 114.99MHz, LEAD FREE, HERMETIC SEALED, CERAMIC, SMT, 10 PIN;
| 型号： | TMXAP46 |
| 厂家： | 
TEMEX |
| 描述： | SAW Filter, 1 Function(s), 114.99MHz, LEAD FREE, HERMETIC SEALED, CERAMIC, SMT, 10 PIN |
| 文件： | 总6页 (文件大小：446K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Filters
TMX AP46
SAW Bandpass Filter – CDMA / PCS BTS – Tx – IF
Preliminary Specification (rev -)
Features................................................................................P01
Package Drawing & Pinout...................................................P01
Technical Characteristics......................................................P02
Nominal Response ...............................................................P03
Maximum Ratings.................................................................P04
Recommended Footprint & Marking .....................................P04
Tape and Reel ......................................................................P04
Recommended Reflow Profiles.............................................P05
TMX AP46
Preliminary Specification (rev -)
SAW Bandpass Filter – CDMA / PCS BTS – Tx – IF
September 1st, 2006
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
SAW Filter for CDMA/PCS Base Station
Low Inband Ripples, High Rejection
1.23 MHz usable Passband
Single Ended Operation on 50 Ω
Lead Free and Hermetically Sealed Ceramic Package for Surface Mounted Technology
Package Drawing and Pinout
The product is in conformance with the European RoHs Regulation 2002/9 .
Pin Configuration
Input
10
Input Return
Output
1
5
Output Return
Case Ground
To Be Grounded
6
2, 3, 4, 7, 8, 9
1, 2, 3, 4, 6, 7, 8, 9
1
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
TMX AP46
Preliminary Specification (rev -)
SAW Bandpass Filter – CDMA / PCS BTS – Tx – IF
September 1st, 2006
Technical Characteristics
Operating Temperature range : [-40°C ; +85°C]
Electrical Parameters
Unit
Minimum (1)
Typical (1)
Maximum (1)
Source Impedance (single ended)
Load Impedance (single ended)
Center Frequency fo
-
-
-
50 (2)
50 (2)
114.99
1.59
1.80
2.08
-
-
-
Ω
Ω
MHz
MHz
MHz
MHz
Bandwidth at –1.5 dB (3)
Bandwidth at –5 dB (3)
1.3
1.54
1.82
1.8
2.02
2.3
Bandwidth at –15 dB (3)
Template on the amplitude, reference is insertion loss at fo
Attenuation at fo ± 1.225 MHz
Attenuation at fo ± 1.275 MHz
Ultimate attenuation(4)
dB
dB
dB
35
50
45
-
-
-
60
57
52
19
0.4
2
170
40
14
-
-
-
24
0.75
6
250
-
Insertion Loss at fo (2)
dB
Amplitude Variation within fo ± 0.615 MHz (5)
Phase linearity within fo ± 0.615 MHz
Group Delay variation within fo ± 0.615 MHz
Triple Transit Suppression
dBp-p
degp-p
nsp-p
dB
-
30
10
-
Input/Output Return Loss at fo (2)
Temperature Coefficient
dB
-
-
ppm/°C2
-0.035
Notes :
(1) Typical values are nominal performance at room temperature. Minimum and maximum values take into account the variations over
temperature range and the variations of standard matching elements (± 2% for inductors and ± 5% for capacitors and resistors)
(2) With external matching network.
(3) The amplitude reference is insertion loss at fo.
(4) Ultimate rejection is defined from 400 MHz to 1 GHz
(5) The amplitude variation is defined as the maximum level – minimum level over the given bandwidth.
(6) The nominal value will be confirmed after prototypes delivery.
Matching Network for 50 Ω / 50 Ω Single Ended Configuration
)
L1
L2
10
5
Input
50 Ω
Output
50 Ω
R2
C2
C1
R1
Single Ended
Single Ended
6
1
GND
GND
Temex Test Fixture
L1 = 68 nH, Q > 40
C1 = 75 pF ,
R1 = 820 Ω
L2 = 82 nH, Q > 40
C1 = 51 pF ,
R1 = 1470 Ω
The given configuration and values are for indication only . They may be different on the customer PC board.
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
TMX AP46
Preliminary Specification (rev -)
SAW Bandpass Filter – CDMA / PCS BTS – Tx – IF
September 1st, 2006
Nominal Frequency Response (Measurement)
References
Scales
CENTER FREQUENCY
LOSS REFERENCE
DELAY REFERENCE
PHASE REFERENCE
0
= 114.99 MHz
= 19.03 dB
= 3.13 µs
= -130.51deg
SCALE_FREQUENCY
SCALE_AMPLITUDE
= 2
= 10
MHz/div
dB/div
-10
-20
-30
-40
-50
-60
-70
-80
108.99
112.99
116.99
120.99
0
1200
1000
800
-1
-2
-3
600
-4
400
GROUP DELAY VARIATION (200 ns/div)
PHASE VARIATION (3 deg/div)
-5
200
-6
0
-7
-200
-400
-600
-800
-100
-120
-140
-160
-180
-200
-8
-9
-10
-11
-12
-13
-14
-15
-16
-17
-220
116.19
113.79
114.19
114.59
114.99
115.39
115.79
3
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
TMX AP46
Preliminary Specification (rev -)
SAW Bandpass Filter – CDMA / PCS BTS – Tx – IF
September 1st, 2006
Maximum Ratings (applicable to the SAW filter only)
Operating Temperature Range
Storage Temperature Range
DC voltage
°C
°C
V
[-40°C ; +85°C]
[-50°C ; +125°C]
0
Input Power
dBm
20 max
ESD Class (Human Body Model)
-
V
-
1A
250 max
C5
Voltage supported (Human Body Model)
ESD Class (Charged Device Model)
Voltage supported (Charge Device Model)
V
1000 max
Recommended Footprint
Marking
Tape and Reel
W
P
E
F
D
D1
P0
P2
A0
B0
K0
tmax
T2
W1
W2
θ
∅D
100
3.94
mm 44.00 16.00 1.75 20.2 1.50 2.00 4.00 2.00
9.4 25.13 2.79 0.333 3.5
2°
2°
44.5
50
inch 1.732 0.63 0.069 0.795 0.059 0.079 0.157 0.079 0.370 0.990 0.109 0.013 0.14
1.75 1.97
4
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
TMX AP46
Preliminary Specification (rev -)
SAW Bandpass Filter – CDMA / PCS BTS – Tx – IF
September 1st, 2006
Recommended Reflow Profiles
Lead Process (Sn/Pb)
Typical reflow temperature for this profile is 240 °C of profile :
Example of profile
Note : Reflow profile to use depends on solder characteristics. Each soldering material supplier has its own recommendation. This
profile is use for the product qualification step.
Lead Free Process :
Typical reflow temperature for this profile is 250 to 260 °C
Example of profile :
Note : Reflow profile to use depends on solder characteristics. Each soldering material supplier has its own recommendation.
TEMEX use the above temperature profile to test reflow compliance of products. Usually the temperature peak is around
250-260 °C during 10 to 20 secondes.
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
相关型号：
©2020 ICPDF网 联系我们和版权申明