1-1190029-7 [TE]
TECHNICAL DATA SHEET; 技术数据表
| 型号： | 1-1190029-7 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | TECHNICAL DATA SHEET |
| 文件： | 总3页 (文件大小：57K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TECHNICAL DATA SHEET
RayMark Six labels
MATERIAL DESCRIPTION:
Computer-printable zero halogen label material. Permanent pressure sensitive
acrylic adhesive. Thermally stabilised white polyester film with special ink
receptive latent cure epoxy coating on the label surface. After printing, the
surface is heat cured, embedding the image within a tough polymeric layer.
USE:
RayMark Six labels have outstanding abrasion and fluid resistance without the
need for an overlay. Ideal for applications where high performance variable
data labels are needed, for example in defence, marine, rail and aerospace
applications. Can be used as a wire/cable wraparound marker for substrates
not less than 6mm (0.25 inches) diameter. Not recommended for outdoor use.
PRINT METHOD/RIBBON:
CURING CONDITIONS:
Dot Matrix: Tyco LQ870, Tyco TMS-SYSTEM-SIX-RIBBON-A.
5 minutes at 150ºC (302ºF) in an air circulating oven. Small curing unit with
automatic drive available (“Permatizer”). Curing also possible with hot air gun.
Contact Tyco for details.
SHELF LIFE/STORAGE
CONDITIONS:
Can be stored unopened for 12 months at temperatures not exceeding 35ºC
(95ºF).
Once opened, product should be stored below 25ºC (77ºF) and 80% relative
humidity and used within 6 months.
SERVICE TEMPERATURE:
Wiring marking: -40ºC to +85ºC (-40ºF to +185ºF) continuous.
Panel marking: -40ºC to +105º (-40ºF to +221ºF) continuous.
Excursion Temperature: 200ºC (392ºF) for 2 hours.
+10°C to +40°C (+50°F to +104°F).
White.
INSTALLATION TEMP:
COLORS:
Document number: TTDS-032
Issue: 1
Date: Octobeter 2001
Pages: 3
www.idento.com
Business locations:
ꢀ
ꢀ
ꢀ
ꢀ
N America: + 1 650 361 3860 (West Coast)
Germany: + 49 (0) 6074 89080
UK: + 44 (0) 1495 244000 (Labels)
Japan: + 81 (0) 44 900 5102
ꢀ
ꢀ
ꢀ
ꢀ
N America: + 1 401 751 6505 (East Coast)
France: + 33 (0) 476 099696
UK: + 44 (0) 1793 528171 (Other products)
Singapore: + 65 (0) 4866 151
All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their
application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics
only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or
consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco
Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable
specification.
RayMark Six labels
PERFORMANCE:
PROPERTY
TEST METHOD
RESULT
Tensile Strength
ASTM D882
200N/25mm
Fungus Resistance
Weathering, carbon arc
Weatherometer
BS2011 Part 2.1 JV1
1500h, BS3900 F3
Rating 1 (max)
Legible, <3 gray scale change,
15 N/25mm adhesion
Legible, <3 gray scale change,
20 N/25mm adhesion
Legible, 15 N/25mm adhesion
Light fastness, xenon arc
250h, ASTM G26A
Continuous humidity
168h, 40ºC (104ºF)/95% RH
JEDEC 22A101-A
Salt spray resistance
Thermal Ageing
Thermal cycling
30days at 35ºC (95ºF), ASTM B117
168h at 150ºC (302ºF), ISO 188
10 cycles, -55ºC (-67ºF) to 150ºC
(302ºF), MIL-STD-810 503.3
RTM 2592
Legible, 15N/25mm adhesion
Legible, 30N/25mm adhesion
Legible, 25N/25mm adhesion
Low temperature impact
Dry abrasion resistance
No cracking
Legible
500 cycles, 500g, CS10 wheel
BS4781-1990 A7
Toxicity index
Smoke index
Oxygen index
Adhesion to:
Stainless steel
Stainless Steel
Aluminum
Acrylic Paint
ABS
NES 713
NES 711
NES 714
2.8
4
>29 installed
FINAT FTM1, 23ºC
FINAT FTM1, 85ºC
FINAT FTM1, 23ºC
FINAT FTM1, 23ºC
FINAT FTM1, 23ºC
FINAT FTM1, 23ºC
FINAT FTM1, 23ºC
15 N/25mm
10 N/25mm
20 N/25mm
20 N/25mm
20 N/25mm
15 N/25mm
15 N/25mm
Nylon
PVC
Document number: TTDS-032
Date: Octobeter 2001
Pages: 3
www.idento.com
Issue: 1
Business locations:
ꢀ
ꢀ
ꢀ
ꢀ
N America: + 1 650 361 3860 (West Coast)
ꢀ
ꢀ
ꢀ
ꢀ
N America: + 1 401 751 6505 (East Coast)
France: + 33 (0) 476 099696
UK: + 44 (0) 1793 528171 (Other products)
Singapore: + 65 (0) 4866 151
Germany: + 49 (0) 6074 89080
UK: + 44 (0) 1495 244000 (Labels)
Japan: + 81 (0) 44 900 5102
All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their
application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics
only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or
consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco
Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable
specification.
RayMark Six labels
PRINT PERMANENCE:
THREAT
TEST METHOD
RESULT
White spirit /IPA mixture 23ºC (73ºF)
Fluid splash resistance:
MIL-STD-202F 215F
Legible
Brake fluid 23ºC (73ºF)
Petrol 23ºC (73ºF)
RW 2029
RW 2029
Legible
Legible
Fluid Immersion (followed by peel test):
Methylated spirit 24h 23ºC (73ºF)
Isopropyl alcohol 24h 23ºC (73ºF)
Petrol 24h 23ºC (73ºF)
Hydraulic fluid 28 days 50ºC (122ºF)
Lubricating oil 28 days 50ºC (122ºF)
Hydraulic fluid 24h 23ºC (73ºF)
Aviation Fuel 24h 23ºC (73ºF)
Diesel fuel 24h 23ºC (73ºF)
Boiling water 2h
MIL-M-81531 4.6.2
MIL-M-81531 4.6.2
MIL-M-81531 4.6.2
MIL-M-81531 4.6.2
MIL-M-81531 4.6.2
MIL-M-81531 4.6.2
MIL-M-81531 4.6.2
MIL-M-81531 4.6.2
MIL-M-81531 4.6.2
Legible; min 15N/25mm adhesion
Legible; min 15N/25mm adhesion
Legible; min 5N/25mm adhesion
Legible; min 15N/25mm adhesion
Legible; min 15N/25mm adhesion
Legible; min 15N/25mm adhesion
Legible; min 15N/25mm adhesion
Legible; min 15N/25mm adhesion
Legible; min 15N/25mm adhesion
Note: see Tyco specification RW2029 for full performance & dimensional details.
Document number: TTDS-032
Date: Octobeter 2001
Pages: 3
www.idento.com
Issue: 1
Business locations:
ꢀ
ꢀ
ꢀ
ꢀ
N America: + 1 650 361 3860 (West Coast)
Germany: + 49 (0) 6074 89080
UK: + 44 (0) 1495 244000 (Labels)
Japan: + 81 (0) 44 900 5102
ꢀ
ꢀ
ꢀ
ꢀ
N America: + 1 401 751 6505 (East Coast)
France: + 33 (0) 476 099696
UK: + 44 (0) 1793 528171 (Other products)
Singapore: + 65 (0) 4866 151
All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their
application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics
only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or
consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco
Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable
specification.
相关型号：
1-1195133-5
IN-LINE SPLICE SEALING SYSTEM, 2 OR 3 TO 1 SPLICER: Nickel Plated, Color Coded, with Inspection Slots
PANDUIT
1-1195133-8
IN-LINE SPLICE SEALING SYSTEM, 2 OR 3 TO 1 SPLICER: Nickel Plated, Color Coded, with Inspection Slots
PANDUIT
1-1197288-6
(1 TO 1 SPLICES-CRIMP) SOLDERSHIELD SPLICE KIT, SHIELDED CABLE 26 THRU 12 AWG, Ni PLATED, 1 TO 4 CONDUCTORS
PANDUIT
©2020 ICPDF网 联系我们和版权申明