1-305183-2 [TE]
Extraction Tools;
| 型号： | 1-305183-2 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Extraction Tools 连接器 连接器支架 |
| 文件： | 总2页 (文件大小：468K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Instruction Sheet
Extraction Tools 1-305183-1 and
1-305183-2 for MATE-N-LOK* Contacts
408-7158
22 APR 15 Rev A
Socket Extraction
Tool 1-305183-2
Sleeve
Handle
Push Rod Button
Pin Extraction Tool
1-305183-1
Figure 1
1. INTRODUCTION
Extraction Tools 1-305183-1 and 1-305183-2 are designed to remove contacts from MATE-N-LOK connectors.
Tool 1-305183-1 is used for the pin contacts, and tool 1-305183-2 for the socket contacts. Read these
instructions thoroughly before starting.
NOTE
Dimensions in this instruction sheet are in millimeters [with inches in brackets]. Figures and illustrations are for reference only
and are not drawn to scale.
Refer to Section 5, REVISION SUMMARY for reason for reissue.
2. DESCRIPTION
Both tools feature a handle and sleeve assembly to release the contact locking lance, and a push rod button to
eject the contact.
3. EXTRACTION PROCEDURE
Select the appropriate extraction tool, according to the type of contact (pin or socket) to be removed (see
Figure 1).
Pin and Socket Extraction (Figure 2)
1. Push in and hold firmly on wire of contact to be removed. This will disengage locking lance from
groove in connector.
2. Grasp the tool handle, and place sleeve over end of contact. Rotating tool slightly, push sleeve
straight into cavity until it bottoms. Allow push rod button to “back out” of handle. The locking lance is
now released.
3. Keep sleeve firmly bottomed in cavity, and depress push rod button. Contact will partially eject as
push rod button is depressed.
4. Pull contact from REAR of connector, and remove tool from cavity.
4. TOOL CERTIFICATION
The extraction tools listed on this document should be certified with the information provided in Figure 3.
TE Connectivity recommends that each tool be inspected immediately upon arrival in your factory, and at
regularly scheduled intervals, to ensure that the tool has not been damaged during handling. Additional tools
can be purchased from TE.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
1 of 2
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
408-7158
Pin Extraction
Wire
Locking Lance Disengaged
Rotate Handle
Push Rod
Button
Groove in Connector
Pin Contact
Wire
Sleeve
Locking Lance
Released
Rear of Connector
Depress Push
Rod Button
Sleeve Bottomed in Cavity
Socket Extraction
Socket Contact
Push Rod
Wire
Button
Rotate Handle
Wire
Sleeve
Groove in
Connector
Sleeve Bottomed in Cavity
Depress Push
Rod Button
Rear of Connector
Locking Lance Released
Figure 2
2.24 [.088]
2.84 [.112]
100.84 [3.97]
98.81 [3.89]
74.42 [2.93]
75.95 [2.99]
4.09 [.161]
3.05 [.120]
EXTRACTION TOOL
1-305183-1
PRODUCT DESIGNED FOR
MATE-N-LOK Pin Contacts
MATE-N-LOK Socket Contacts
1-305183-2
Figure 3
5. REVISION SUMMARY
Updated document to corporate requirements, and added new logo
Deleted Section 3.B and merged Figures 2 and 3 together and renumbered
2 of 2
Rev A
相关型号：
1-306027-0
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
TE
1-306027-5
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
TE
1-306027-6
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
TE
1-306105-1
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
TE
1-306131-6
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
TE
1-307275-0
Application and Maintenance for Crimping Die Assemblies for Tape-Mounted PIDG and PLASTI-GRIP Terminals and Splices
TE
1-307275-1
Application and Maintenance for Crimping Die Assemblies for Tape-Mounted PIDG and PLASTI-GRIP Terminals and Splices
TE
1-307275-2
Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY.
TE
©2020 ICPDF网 联系我们和版权申明