1393293-8 [TE]
Automotive Relays Plug-in Micro ISO Relays;
| 型号： | 1393293-8 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Automotive Relays Plug-in Micro ISO Relays 光电二极管 继电器 |
| 文件： | 总4页 (文件大小：262K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Automotive Relays
Plug-in Micro ISO Relays
Micro Relay A/VFMA
■
■
■
High current version with limiting continuous current 30A at 85°C
Pin assignment according to ISO 7588 part 3
Customized versions on request
– 24VDC versions with special contact gap
– Integrated components (e.g. diode)
– Customized marking
– Special covers (e.g. notches, release features)
– For latching version refer to Micro Relay Latching
– For low noise version refer to Micro Relay Low Noise
– For high current version refer to part number table
Typical applications
Cross carline up to 30A for example: ABS control, blower fans, cooling fan,
door control, door lock, fuel pump, heated front screen, immobilizer, interior
lights, seat control, seatbelt pretensioner, sun roof, trunk lock, valves,
window lifter, wiper control.
F074_fcw1_bw
FVFMA_fcw1c
Contact Data
Form A Standard
Form C
Form A HC
1 form A,
1 NO
Form C HC
Contact arrangement
1 form A,
1 form A,
1 form C,
1 form C,
1 CO
1 form C
1 CO
1 NO
12VDC
1 NO
24VDC
NO/NC
30A
25A
10A
1 CO
12VDC
NO/NC
30/20A
25/15A
10/8A
Rated voltage
Limiting continuous current, form A/form B
23°C
24VDC6)
12VDC
12VDC
30A
25A
10A
120A
30A
30/20A
25/15A
10/8A
120/20A
20/10A
35A
30A
15A
120A
30A
35/25A
30/20A
15/10A
120/40A
30/20A
85°C
125°C
Limiting making current1)2), A/B (NO/NC)
Limiting breaking current
Limiting short-time current,
overload current, ISO 8820-33)
120A
20A
120/40A
30/15A
1.35 x 25A, 1800s
1.35 x 25A, 1800s
1.35 x 30A, 1800s
2.00 x 25A, 5s
3.50 x 25A, 0.5s
6.00 x 25A, 0.1s
2.00 x 25A, 5s
3.50 x 25A, 0.5s
6.00 x 25A, 0.1s
2.00 x 30A, 5s
3.50 x 30A, 0.5s
6.00 x 30A, 0.1s
Jump start test
24VDC for 5min conducting nominal current at 23°C
Contact material
silver based
1A at 5VDC
Min. recommended contact load4)
Initial voltage drop
NO contact at 10A, typ./max.
NC contact at 10A, typ./max.
Frequency of operation
Electrical endurance5)
resistive load at 14VDC
15/200mV
20/250mV
6 ops./min (0.1Hz)
>1x105 ops.
25A
>1x105 ops.
25A (NO)
>1x105 ops.
30A
resistive load at 28VDC
>1x105 ops.
15A
>1x105 ops.
15A (NO)
>1x105 ops.
10A (NC)
Mechanical endurance
typ. 107 ops.
Max. DC load breaking capacity
1) The values apply to a resistive or inductive load with suitable spark suppression and at
maximum 13.5VDC for 12VDC or 27VDC for 24VDC load voltages.
2) For a load current duration of maximum 3s for a make/break ratio of 1:10.
3) Current and time are compatible with circuit protection by a typical automotive fuse.
Relay will make, carry and break the specified current.
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at
http://relays.te.com/appnotes/
5) Electrical endurance data are only valid for the variants with resistor.
6) Not applicable for polarity reverse loads like powerwindows
Load limit curve 1: arc extinguishes during transit time (CO contact).
Load limit curve 2: safe shutdown, no stationary arc (NO contact).
Load limit curves measured with low inductive resistors verified for 1000 switching events.
1
05-2016, Rev. 0516
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2016 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Automotive Relays
Plug-in Micro ISO Relays
Micro Relay A/VFMA (Continued)
Coil Data
Coil voltage range
Other Data
EU RoHS/ELV compliance
12/24VDC
compliant
Ambient temperature
Climatic cycling with condensation,
EN ISO 6988
-40 to +125°C
Coil versions, DC coil
Coil
code
Rated
voltage
VDC
12
24
12
Operate
voltage
VDC
7.2
14.4
7.2
Release
voltage
VDC
1.6
3.6
1.6
Coil
resistance7)
Ω 10ꢀ
119
Rated coil
power7)
W
1.20
1.34
1.00
1.60
1.34
6 cycles, storage 8/16h
10 cycles, -40/+85°C (5°C/min)
6 cycles, upper air temp. 55°C
56 days
Temperature cycling,
IEC 60068-2-14, Nb
Damp heat cyclic,
IEC 60068-2-30, Db, Variant 1
Damp heat constant,
IEC 60068-2-3 (78), Ca
Category of environmental protection,
IEC 61810
001
002
005
F
430
144
90
430
12
7.2
14.4
1.2
3.6
H
24
All figures are given for coil without pre-energization, at ambient temperature +23°C.
7) Without components in parallel.
RT I – dustproof
IP54
Degree of protection, IEC 60529
Corrosive gas
IEC 60068-2-42
Coil operating range
10 2cm3/m3 SO2, 10 days
1 0.3cm3/m3 H2S, 10 days
TE074_OVR1
IEC 60068-2-43
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep)
Shock resistance (functional)
IEC 60068-2-27 (half sine)
Drop test, free fall, IEC 60068-2-32
Terminal type
10 to 500Hz min. 5g8)
min. 20g 11ms8)
1m onto concrete
plug-in, QC
Cover retention
axial force
pull force
push force
150N
150N
200N
Terminal retention
pull force
push force
resistance to bending
force applied to side
torque
100N
100N
10N9)
10N9)
0.3Nm
Weight
approx. 16 to 20g (0.5 to 0.7oz)
Packaging unit
Micro A
VFMA
480 pcs.
600 pcs.
Does not take into account the temperature rise due to the contact current
E = pre-energization.
8) No change in the switching state >10µs. Valid for NC contacts, NO contact values
significantly higher.
9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal
must not have moved by more than 0.3mm
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Load dump test
ISO 7637-1 (12VDC), test pulse 5
ISO 7637-2 (24VDC), test pulse 5
500VACrms
500VACrms
Accessories
For details see datasheet
Connectors for Micro ISO Relays
Vs=+86.5VDC
Vs=+200VDC
Terminal Assignment
NOD
NOR
1 form A, 1 NO with resistor
COD
COR
1 form A, 1 NO with diode
1 form C, 1 CO with diode
1 form C, 1 CO with resistor
2
5
2
5
2
5
4
2
5
4
1
3
1
3
1
3
1
3
2
05-2016, Rev. 0516
www.te.com
© 2016 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Automotive Relays
Plug-in Micro ISO Relays
Micro Relay A/VFMA (Continued)
Dimensions
Quick connect terminal similar to ISO 8092-1.
Micro A: Terminals without holes
VFMA: Terminals with holes
View of the terminals (bottom view)
3
05-2016, Rev. 0516
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
© 2016 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Automotive Relays
Plug-in Micro ISO Relays
Micro Relay A/VFMA (Continued)
Product code structure
Typical product code V23074
-A
1
001 -A4
02
Type
V23074 Micro Relay A
Version
A
Standard
H
High current
Diode
Coil suppression
1
Resistor
12VDC
2
Coil
001
002
-A5
03
24VDC
005
12VDC for high current version
Contact material
-A4
Silver based
Silver based for high current version
1 form C, 1 CO
Contact arrangement
02
1 form A, 1 NO
Product code structure
Typical product code VFMA
-1
1
F
4
1
-S01
Type
VFMA VFMA Series
Version
1
Standard
Contact arrangement
1
F
1 form A, 1 NO
12VDC
5
1 form C, 1 CO
Coil
H
7
24VDC
Contact material
4
Terminals
1
Silver based
Silver based for high current version
Plug-in
Coil suppression
S01 Resistor
Product code
Equivalent to
VFMA-11F41-S01
V23074-A1001-A402
VFMA-15F41-S01
V23074-A1001-A403
Version Coil suppr. Circuit1)
Coil Arrangement Terminals Part number
V23074-A1001-A402
VFMA-11F41-S01
Standard
Resistor 680Ω
NOR
12VDC 1 form A, 1 NO Plug-in, QC
4-1904124-2
9-1393292-9
4-1904124-3
1393293-8
V23074-A1001-A403
VFMA-15F41-S01
COR
1 form C, 1 CO
V23074-A2001-A402
V23074-A2001-A403
V23074-H1005-A502
V23074-A1002-A402
VFMA-11H41-S01
V23074-A1002-A403
V23074-A2002-A402
V23074-A2002-A403
Diode
NOD
COD
NOR
1 form A, 1 NO
1 form C, 1 CO
1 form A, 1 NO
24VDC
5-1393292-8
6-1419137-4
4-1904124-4
8-1393292-9
6-1415008-2
3-1393292-8
6-1393292-2
6-1393292-3
High current Resistor 1000Ω
Standard Resistor 1800Ω
VFMA-11H41-S01
V23074-A1002-A402
COR
NOD
COD
1 form C, 1 CO
1 form A, 1 NO
1 form C, 1 CO
Diode
1) See terminal assignment diagrams.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
Production in Asia (only)
Product code
Version
Coil suppression Circuit1)
Coil
Arrangement
1 form A, 1 NO
1 form C, 1 CO
1 form A, 1 NO
1 form C, 1 CO
1 form A, 1 NO
Terminals Part number
V23074-A1001-A402
V23074-A1001-A403
V23074-A2001-A402
V23074-A2001-A403
Standard
Resistor 680Ω
NOR
COR
NOD
COD
NOR
12VDC
Plug-in, QC
1393292-5
8-1393292-4
2-1904111-7
9-1904105-7
2-1414971-4
Diode
V23074-H1005-A502
1) See terminal assignment diagrams.
Other types on request.
High current
Resistor 1000Ω
This list represents the most common types and does not show all variants covered by this datasheet.
4
05-2016, Rev. 0516
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2016 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
相关型号：
©2020 ICPDF网 联系我们和版权申明