2071229-2 [TE]
30A switching in 1 Form B (NC);
| 型号： | 2071229-2 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | 30A switching in 1 Form B (NC) |
| 文件： | 总3页 (文件大小：592K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
General Purpose Relays
Power Relays
Potter & Brumfield
T9A_2X series, DC coil NC PCB or Panel Mount Relay
n
n
n
30A switching in 1 Form B (NC)
Plastic sealed case available
Meets UL 508 and 873 spacing - 3.18mm through air, 6.36mm over
surface
n
n
Option for load connections via 0.250” (6.35mm) Q.C. terminals
UL class F insulation system standard
Typical applications
Energy Management, Lighting, Industrial Controls
Z
Approvals
between contact and coil
Initial surge withstand voltage
between contact and coil
Initial insulation resistance
between insulated elements
Clearance/creepage
2500Vrms
UL E58304
Technical data of approved types on request
6kV
1x109Ω
Contact Data
Contact arrangement
Rated voltage
1 form B (NC)
240VAC
between contact and coil
3.18mm clearance/6.36mm
Max. switching voltage
Rated current
Limiting continuous current
Contact material
240VAC
30A
30A
Other Data
AgSnOInO
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
Min. recommended contact load
Initial contact resistance
Frequency of operation, with/without load
Operate/release time max., including bounce
Electrical endurance
1A, 5VDC or 12VAC
75 mΩ at 1A at 5VDC or 12VAC
360/3600hr
18/15ms
20,000 typical
DC coil
-55ºC to 70ºC2)
Category of environmental protection
IEC 61810
RT0 - open, RTI - dust protected
RTII - flux proof, RTIII - wash tight
1.65mm max excursions, 10-55 Hz
10g for 11msec
Contact ratings 1)
Type
Load
Cycles
20x103
Vibration resistance (functional)
Shock resistance (functional)
Shock resistance (destructive)
Terminal type
UL 508/873
AgSnOInO (contact code 6)
NC 30A, 240VAC, Resistive
1) Contact ratings at 25°C (unless otherwise noted) with relay properly vented. Remove
vent nib after soldering and cleaning.
100g
pcb-tht, pcb-tht + quick connect, and
quick connect
Weight
26g mounting code 1
33g mounting codes 2 and 5
Mechanical endurance
10x106 ops.
Resistance to soldering heat THT
IEC 60068-2-20
250°C
Packaging/unit
tray/50 pcs., bundle/250 pcs., box/500 pcs.
2) Operating ambient temperature must consider “Must Operate Voltage Change Over
Temperature,” Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to
cool) and Maximum Coil Temperature. Specification ambient considers 30A load with
coil cooled to ambient.
Coil Data
Coil voltage range
5 to 110VDC
110% of nominal
155°C
Max. coil power
Max. coil temperature
Coil insulation system according UL
Coil versions, DC coil
Class F
Coil
code
Rated
voltage
VDC
Operate
voltage
VDC
Release
voltage
VDC
Coil
resistance
Ω 10%
Rated coil
power
mW
Code D (1W) coil
5
9
5
9
3.75
6.75
9
11.25
13.5
18
0.5
0.9
1.2
1.5
1.8
2.4
4.8
11
25
81
144
225
324
576
2304
12100
1W
1W
1W
1W
1W
1W
1W
1W
12
15
18
24
48
110
12
15
18
24
48
110
36
82.5
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts
1500Vrms
1
01-2014, Rev. 0114
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
General Purpose Relays
Power Relays
Potter & Brumfield
T9A_2X series, DC coil NC PCB or Panel Mount Relay (Continued)
Dimensions
T9AS – Mounting and termination code 2
T9AP – Mounting and termination code 5
.250 x .032 QUICK
(6.35 x .81) CONNECT
.187 x .020
(4.75 x .508)
QUICK
1.080 MAX.
(27.43)
.130 .020
(3.30 .51)
1.100 MAX.
(27.94)
CONNECT
.03
Ø
.250 x .032
(6.35 x .81)
QUICK
(.80)
2 PLACES
1.980 MAX.
(50.29)
.045 x .045
(1.14 x 1.14)
CONNECT
1.280 MAX.
(32.51)
1.713 .010
(43.51 .25)
1.280 MAX.
(32.51)
.032 x .062
(.81 x 1.57)
1.100 MAX.
(27.94)
1.080 MAX.
(27.43)
.071 (1.80) RAD. FOR #6 SCREW
Note: Recommended mounting screw torque is 4.0-5.0 lbs.in when #6 screw is used.
Plain case
Open style
.805 MAX.
(20.4)
.680 MAX.
(17.27)
.212 MAX.
(5.38)
.130 + .016
.032 x .062
(.8 x 1.6)
TERMINAL
.032 x .062
– .010
.950 MAX.
(24.13)
(.8 x 1.6)
3.30 + .41
(
)
.130 .020
(3.3 .51)
TERMINAL
–.25
.10 MAX.
(2.54)
.50
(12.8)
.69
(17.6)
1.280 MAX.
(32.51)
.045 x .045
(1.14 x 1.14)
TERMINAL
1.20 MAX.
(30.5)
.045 x .045
(1.14 x 1.14)
TERMINAL
.03
Ø
(.80)
.03
Ø
.016
(.43)
1.08 MAX.
(27.43)
TERMINALS
(0.80)
TERMINALS
Terminal assignment
Bottom view on pins
PCB layout
Bottom view on pins
T9AP/S - Mounting and termination code 2
T9AS/V - Mounting and termination code 1
.140 MAX.
.250 MAX.
.212 MAX.
.081 .005 DIA.
(5.38)
.081 .005 DIA.
(2.06 .13)
(3.56)
(6.35)
(2.06 .13)
.078 .003 DIA.
(1.98 .08)
.400
.400
(10.16)
.078 .003 DIA.
(10.16)
(1.98 .08)
.043 .003 DIA.
(1.09 .08)
.500
(12.7)
.043 .003 DIA.
(1.09 .08)
.500
(12.7)
.150
(3.81)
.550
(13.97)
.150
(3.81)
.550
(13.97)
.700
.700
(17.78)
(17.78)
2
01-2014, Rev. 0114
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
General Purpose Relays
Power Relays
Potter & Brumfield
T9A_2X series, DC coil NC PCB or Panel Mount Relay (Continued)
Product code structure
Type
Typical product code
T9A
S
2X
D
1
6
-12
T9A Power PCB or panel mount relay T9A
Enclosure
N
P
S
V
Open, no enclosure (requires mounting code 1)
Dust protected plastic case (requires mounting code 5)
Wash-tight plastic case with knock off nib (requires mounting code 1 or 2)
Flux-proof plastic case (requires mounting code 1 or 2)
Contact arrangement
2X 1 form B (1 NC) with ratings to 30A
Coil Input
D
DC voltage, 1W
Mounting and termination
1
2
5
PCB mounting; PCB terminals for coil and contacts (only available with enclosure code N, S or V)
PCB mounting; PCB term. for coil and contacts; 6.35mm (.250in) QC for contacts (only available with enclosure code S or V)
Flanged mounting; 4.75mm (.187) QC for coil; 6.35mm (.250in) QC for contacts (only available with enclosure code P)
Contact material + Size
AgSnOInO
Coil voltage
Coil code: please refer to coil versions table
6
Product Code
T9AV2XD16-12
T9AP2XD56-12
Enclosure
Flux proof case
Unsealed, plastic dust cover
(mounting code 5)
Contacts
1 NC contact
Coil
1W
Mounting
pcb terminals
Flanged mount,
quick conn.
Contact Material
Coil
12VDC
Part Number
2071229-2
2071229-1
AgSnOInO
3
01-2014, Rev. 0114
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
相关型号：
2072350100
824MHz-2170MHz Cellular Flexible Antenna, 100.00mm Cable Length, Compatible with U.FL / I-PEX MHF Connectors
MOLEX
2072350200
824MHz-2170MHz Cellular Flexible Antenna, 200.00mm Cable Length, Compatible with U.FL / I-PEX MHF Connectors
MOLEX
©2020 ICPDF网 联系我们和版权申明