2122D4PA 概述
Miniature Electropneumatic Timing Relay 微型电子气动定时继电器 延时继电器
2122D4PA 规格参数
生命周期: | Obsolete | Reach Compliance Code: | unknown |
ECCN代码: | EAR99 | HTS代码: | 8536.41.00.20 |
风险等级: | 5.71 | Is Samacsys: | N |
最大可调时间延迟: | 0.1 s | 最小可调时间延迟: | 0.03 s |
主体宽度: | 38.61 mm | 主体高度: | 108.23 mm |
主体长度或直径: | 38.61 mm | 最大线圈电流(直流): | 0.096 A |
线圈功率: | 4608 mW | 线圈电阻: | 500 Ω |
最大线圈电压(直流): | 48 V | 线圈/输入电源类型: | DC |
触点(交流)最大额定R负载: | 10A@120VAC | 最大触点电流(交流): | 10 A |
最大触点电流(直流): | 10 A | 触点(直流)最大额定R负载: | 10A@30VDC |
最大触点电压(交流): | 120 V | 最大触点电压(直流): | 30 V |
触点/输出电源类型: | AC/DC | 电气寿命: | 100000 Cycle(s) |
安装特点: | PANEL MOUNT | 最高工作温度: | 185 °C |
最低工作温度: | -67 °C | 物理尺寸: | 38.61mm X 38.61mm X 108.23mm |
参考标准: | CE; MIL-R-6106E | 继电器动作: | MOMENTARY |
继电器功能: | DPDT | 继电器类型: | OFF-DELAY RELAY |
表面贴装: | NO | 端接类型: | CONNECTOR |
Base Number Matches: | 1 |
2122D4PA 数据手册
通过下载2122D4PA数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Catalog 1308242
Issued 3-03
AGASTAT
2100 series
Miniature Electropneumatic
Timing Relay
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent
approvals files of the agencies/laboratories and review them to ensure the
product meets the requirements for a given application.
Repeat Accuracy: NORMAL VERTICAL POSITION
Design Features
• High Repeat Accuracy over voltage and temperature extremes
• Hermetically sealed units are designed for high shock and vibration
applications
• Instant recycling – easy linear adjustment
• Exclusive Dial Head adjustment – no needle valves
• Delay ranges from milliseconds to 3 minutes
• DPDT contacts
+5% at 25°C; +7% at 85°C; +8% at -55°C.
The average time between -55°C and 85°C will be within +20% of the
average @ 25°C with a proportionally reduced effect at lesser extremes.
In extremely short delay settings an additional 8 msec. variation may result
on AC models due to "half cycle" alternating current effect.
Setting Tolerance: Factory time setting, when specified, subject to addition-
al +5% tolerance.
Position Sensitivity:
HORIZONTAL POSITION: Approximately 5% increase from the initial time in
the vertical position.
INVERTED POSITION: Approximately 10% increase from the initial time in
the vertical position.
Reset Time: 2112 Series: 25 msec.; 2122 Series: 75 msec.
Relay Release Time: 25 msec. (2112 Series)
Relay Operate Time: 75 msec. (2122 Series)
Design & Construction
Sealed patented timing head circulates air under controlled pressure
through a variable orifice to provide adjustable timing. Circular-path Dial
Head principle replaces traditional needle valve.
Snap-action switch assembly provides sustained contact pressure during
timing cycles. Specially designed over center mechanism assures flutter-
free load transfer after extended delay periods.
Precision-wound solenoid assembly supplies the basic motive force
when the control circuit is closed.
Operating Voltage: Coil Data
Nominal Resistance
Nominal
Operating
Voltage
Resistance
Ohms
Operating
Ohms
1ꢀ0
These assemblies are mounted in a rigid self-supporting framework within
a steel enclosure. This rugged construction assures permanent alignment
of all operating members, the key to this unit's long trouble-free operation.
Code Voltage
Code
1ꢀ0
M
N
P
R
Y
12VDC
28VDC
48VDC
110VDC
125VDC
30
S
S
T
120V 60 Hz 190 (2112 Series)
120V 60Hz 285 (2122 Series)
131
500
3200
3380
240V 60Hz
765
Operation
U
115V 400Hz
2600
Series 2112 (On-Delay) - Applying rated voltage to the
solenoid coil starts the preset time delay. At the end of the
delay period the NC contacts break and the NO contacts
make. Contacts remain in this position until the coil is de-
energized, when the switch instantaneously returns to its
original position. De-energizing the coil, either during or
after the delay period, will immediately (within 25 msec.) re-
cycle the unit. It will then provide another full delay period
on re-energization.
Series 2122 (Off-Delay) - Applying rated voltage to the
coil for at least 75 msec. (for accurate timing) will instanta-
neously transfer the switch, breaking the NC contacts and
making the NO contacts. Contacts remain in this position
as long as the coil is energized. The preset time delay
period begins as soon as the coil is de-energized, at the
end of which the switch returns to its original position.
No power is required during the timing period. Re-
energizing the coil, either during or after the delay period,
will immediately start a new cycle with full delay period.
Transients: Insensitive to transients of +1500 VAC for 10 milliseconds
Dielectric: 1000V RMS @ 60Hz between non-connected terminals.
Contact Rating (DPDT Contacts):
3ꢀV
DC
11ꢀV
DC
12ꢀV
12ꢀV
24ꢀV
6ꢀHz 4ꢀꢀHz 6ꢀHz
Inductive (Amps)
Resistive (Amps)
2
.75
1
3
2
1.5
5
10
10
10
Based on 100,000 operations electrical, 1,000,000 mechanical. Inductive and
capacitive load should not have inrush currents that exceed five times normal
operating load.
Ambient Temperature Range: -55°C to +85°C
Weight: Maximum, any unit - 17 ozs.
Mounting/Terminals: Chassis mounting tabs, octal plugs and external (-4)
or internal (-5) adjustment. Panel mounting back plate, internal adjustment,
and solder hook terminals (-9).
Operation (Listed values at nom. voltage, 25°C unless noted).
Operating Mode:
2112: On-delay (delay on pull-in); 2122: Off-delay (delay on drop-out)
Timing Adjustment: All standard models offer easy linear adjustment over
one of nine timing ranges listed below. For applications requiring frequent
readjustment, the external knob model with calibrated dial is recommended.
For tamper-proof installation or where readjustment is infrequent, the internal
key model may be preferred. This model requires removal of the cover plate
for timing adjustment. Hermetically sealed models provide a slotted
adjusting screw under the cap nut on the top cover.
Timing Ranges:
--4
--5
--9
Code
Range
Code
Range
These are minimum standards; where more severe environmental
conditions must be met, please consult the factory.
A
B
C
D
E
F
.03 to .1 sec.
.1 to .3 sec.
.15 to 1.0 sec.
.375 to 3.0 sec.
.75 to 10.0 sec.
1.0 to 30.0 sec.
G
H
J
K
L
2.0 to 60.0 sec.
5.0 to 120.0 sec.
5.0 to 180.0 sec.
1.5 to 30.0 cycles
3.0 to 120.0 cycles
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
1254
Catalog 1308242
Issued 3-03
AGASTAT
Outline Dimensions for Industrial Models (Dimensions in inches. Multiply by 25.4 to obtain millimeters.)
Ordering Information for Industrial Models
Typical Part No. ➤
21
1
2
D
4
N
B
1. Basic Series:
21 = 2100 Miniature electropneumatic timing relay
2. Operation:
1 = On-delay
2 = Off-delay
3. Contact Arrangement:
2 = DPDT (2 form C)
4. Operating Voltage:
A = AC
D = DC
5. Physical Characteristics:
Code
Enclosure
Adjustment
Connector
Mounting
4 =
5 =
9 =
Unsealed
Unsealed
Unsealed
External Knob
Internal Key
Internal Key
Octal Plug
Octal Plug
Solder Hook
Chassis Mount
Chassis Mount
Panel Mount Plate
6. Coil Voltage:
M = 12VDC
S = 120VAC, 50/60 Hz. T = 240VAC, 60 Hz.
N = 28VDC
P = 48VDC
R = 110VDC
Y = 125VDC
7. Timing Range:
A = .03 to .1 sec.
B = .1 to .3 sec.
C = .15 to 1.0 sec.
E = .75 to 10.0 sec. H = 5.0 to 120.0 sec.
K = 1.5 to 30.0 cycles
L = 3.0 to 120.0 cycles
D = .375 to 3.0 sec. F = 1.0 to 30.0 sec. J = 5.0 to 180.0 sec.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery..
None at present.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
1255
Catalog 1308242
Issued 3-03
AGASTAT
Specifications for MIL-Spec and Hermetically Sealed Models
Dielectric: In accordance with specification MIL-R-
6106E (ASG). Also withstands 1,000 Volts RMS at
60 Hz between non-connected terminals.
Agastat
timing relays
perform to
military
Other: Agastat Miniature Timing Relays also
conform to applicable Mil-Spec. requirements
covering:
specifications
in Patriot
Moisture
Humidity
Sand/Dust
Salt Spray
Ozone
missiles.
Sunshine
Acoustic Noise
Prolonged Storage
Outline Dimensions for MIL-Spec and Hermetically Sealed Models (In inches. Multiply by 25.4 for millimeters).
8 pin solder
hook or MS/AN
Connector
8 pin solder
hook or MS/AN
Connector
Panel Mount
—H1, —H3
Panel Mount
—9
Octal Plug (with internal
adjustment or external
adjustment knob
Octal Plug (with internal
adjustment or external
adjustment knob
Chassis Mount
Chassis Mount
—4, —5
—H2
Ordering Information for MIL-Spec and Hermetically Sealed Models
Typical Part No. ➤
21
1
2
D
H1
N
B
1. Basic Series:
21 = 2100 Miniature electropneumatic timing relay
2. Operation:
1 = On-delay
2 = Off-delay
3. Contact Arrangement:
2 = DPDT (2 form C)
4. Operating Voltage:
A = AC
D = DC
5. Physical Characteristics:
Code
Enclosure
Adjustment
Connector
Mounting
H1 =
H2 =
H3 =
Hermetically Sealed
Hermetically Sealed
Hermetically Sealed
External Screw
External Screw
External Screw
Solder Hook
Octal Plug
“AN” Connector
Panel Mount Plate
Chassis Mount
Panel Mount Plate
4 =
5 =
9 =
Unsealed
Unsealed
Unsealed
External Knob
Internal Key
Internal Key
Octal Plug
Octal Plug
Solder Hook
Chassis Mount
Chassis Mount
Panel Mount Plate
6. Coil Voltage:
M = 12VDC
S = 120VAC, 50/60 Hz. T = 240VAC, 60 Hz.
N = 28VDC
P = 48VDC
U = 115VAC, 400 Hz.
R = 110VDC
Y = 125VDC
7. Timing Range:
A = .03 to .1 sec.
B = .1 to .3 sec.
C = .15 to 1.0 sec.
E = .75 to 10.0 sec. H = 5.0 to 120.0 sec.
K = 1.5 to 30.0 cycles
L = 3.0 to 120.0 cycles
D = .375 to 3.0 sec. F = 1.0 to 30.0 sec. J = 5.0 to 180.0 sec.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery..
None at present.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
1256
2122D4PA 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
2122D4PB | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D4PC | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D5MA | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D5MB | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D5MC | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D5NA | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D5NB | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D5NC | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D5PA | TE | Miniature Electropneumatic Timing Relay | 获取价格 | |
2122D5PB | TE | Miniature Electropneumatic Timing Relay | 获取价格 |
2122D4PA 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6