3-1904117-4 [TE]
Automotive Relays Plug-in Maxi ISO Relays;型号: | 3-1904117-4 |
厂家: | TE CONNECTIVITY |
描述: | Automotive Relays Plug-in Maxi ISO Relays |
文件: | 总3页 (文件大小:343K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Automotive Relays
Plug-in Maxi ISO Relays
Power Relay F7
■
■
Pin assignment similar to ISO 7588 part 1
Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)
Typical applications
Cross carline up to 70A for example: ABS control, cooling fan, energy
management, engine control, glow plug, heated front screen, ignition,
lamps: front, rear, fog light, main switch/supply relay.
F134J_a_bw
Contact Data
Contact Data (continued)
Contact arrangement
1 form A,
1 NO
–
1 form A,
1 NO
–
1 form A,
1 NO
Mechanical endurance
>1x107ops.
1) Special high performance 24VDC version with contact gap >0.8mm.
2) The values apply to a resistive or inductive load with suitable spark suppression and
at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current
duration of maximum 3s for a make/break ratio of 1:10.
3) Current and time are compatible with circuit protection by a typical automotive fuse.
Relay will make, carry and break the specified current.
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at
http://relays.te.com/appnotes/
5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay
coil increases the release time and reduces the lifetime caused by increased erosion
and/or higher risk of contact tack welding.
Contact gap
Rated voltage
Limiting continuous current
23°C
85°C
>0.8mm
12VDC
24VDC
24VDC1)
70A
50A
30A
240A
70A
70A
50A
30A
240A
25A
70A
50A
30A
240A
40A
125°C
Limiting making current2)
Limiting breaking current
Limiting short-time current
overload current, ISO 8820-33)
1.35 x 50A, 1800s
2.00 x 50A, 5s
Coil Data
Rated coil voltage
3.50 x 50A, 0.5s
6.00 x 50A, 0.2s
24VDC for 5min,
12VDC, 24VDC
Jump start test, ISO 16750-1
Coil versions, DC coil
conducting nominal current at 23°C
Silver based
Coil
code
Rated
voltage
VDC
12
24
24
Operate
voltage
VDC
7.2
14.4
16.0
14.4
14.4
Release
Coil
resistance6)
Ω 10ꢀ
90
Rated coil
power6)
W
Contact material
voltage
VDC
1.6
3.2
4.0
2.4
2.4
Min. recommended contact load4)
Initial voltage drop,
1A at 5VDC
052
053
056
065
165
1.6
1.8
2.1
2.0
form A (NO) contact at 10A, typ./max.
Frequency of operation at nominal load
Operate/release time typ.
10/300mV
6 ops./min (0.1Hz)
7/2ms5)
324
268
288
288
24
24
Electrical endurance
resistive load at 14VDC
2.0
>1x105 ops.
–
–
–
6) Without components in parallel.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
70A
>2x105 ops.
–
50A
–
resistive load at 28VDC
>1x105ops. >1x105 ops.
25A 40A
Max. DC load breaking capacity
Coil operating range
TEVF4_OVR1
ECR0629-N
Load limit curve: safe shutdown, no stationary arc/make contact.
Load limit curve measured with low inductive resistors verified for 1000 switching events.
Does not take into account the temperature rise due to the contact current
E = pre-energization.
1
03-2016, Rev. 0316
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog, product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2016 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Automotive Relays
Plug-in Maxi ISO Relays
Power Relay F7 (Continued)
Insulation Data
Other Data (continued)
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Load dump test
Shock resistance (functional)
IEC 60068-2-27 (half sine)
Drop test, free fall
IEC 60068-2-32
Terminal type
500Vrms
500Vrms
500Vrms
6ms, min. 30g.8)
1m onto concrete
plug-in, QC/ PCB
ISO 7637-1 (12VDC), test pulse 5
ISO 7637-2 (24VDC), test pulse 5
Vs=+86.5VDC
Vs=+200VDC
Cover retention
axial force
pull force
150N
150N
150N
push force
Other Data
Terminal retention
pull force
push force
resistance to bending
force applied to side
torque
EU RoHS/ELV compliance
Protection to heat and fire according UL-94
Ambient temperature
compliant
HB or better7)
-40 to 125°C
100N
100N
10N9)
Climatic cycling with condensation
EN ISO 6988
10N9)
0.3Nm
6 cycles, storage 8/16h
Temperature cycling,
IEC 60068-2-14, Nb
Damp heat cyclic,
IEC 60068-2-30, Db, Variant 1
Damp heat constant, IEC 60068-2-3, Ca
Category of environmental protection,
IEC 61810
Degree of protection, IEC 60529
Corrosive gas
IEC 60068-2-42
IEC 60068-2-43
Weight
approx. 38g (1.3oz)
10 cycles, -40/+85°C (5°C/min)
Resistance to soldering heat THT
IEC 60068-2-20
Packaging unit
plug-in:
plug-in with bracket:
PCB
7) Refers to used materials.
8) No change in the switching state >1μs. Valid for NC contacts, NO contact values
significantly higher.
9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal
must not have moved by more than 0.3mm.
260°C, 10s
6 cycles, upper air temp. 55°C
56 days
210 pcs.
208 pcs.
315 pcs.
RTI – dustproof, RT III – sealed
IP54 (dustproof), IP67 (sealed)
10 2cm3/m3 SO2, 10 days
1 0.3cm3/m3 H2S, 10 days
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep)
10 to 500Hz, min. 5g8)
Accessories
For details see datasheet
Connectors for Maxi ISO Relays
Terminal Assignment
NO
1 form A, NO
NOR
1 form A, NO with resistor
NOD
1 form A, NO with diode
85
87
85
87
30
85
87
30
86
30
86
86
Dimensions
Power Relay F7 with quick connect terminals similar to ISO 8092-1
View of the terminals (bottom view)
2ꢁ.9 0.ꢀ
1ꢁ 0.1
6
0.4
4
0.2
ꢁ.ꢀ 0.1
TE1103-411
2ꢁ.9 0.ꢀ
16 0.ꢁ
24.9 0.ꢀ
Measurement
reference plane
4x
0.ꢀ
11 0.ꢁ
17 +1/-0.ꢁ
ø 1.7 +0.2
6.ꢀ 0.1
0.8 0.0ꢁ
1.2 0.0ꢁ
9.ꢁ 0.1
2
03-2016, Rev. 0316
www.te.com
© 2016 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Automotive Relays
Plug-in Maxi ISO Relays
Power Relay F7 (Continued)
Dimensions (continued)
Power Relay F7 with PCB terminals
View of the terminals (bottom view)
Mounting hole layout (bottom view)
3.8
3.8
26.2 MAX.
26.2 MAX.
6x Ø 2.18
30
17.9
8.4
25.2 MAX.
85
86
2.7
87
3.8
3.0
2x Ø 1.93
8.5
3.8
1.5
17.0
TE2104-H1
TE2105-Q2
TIN PLATED
3.8
Product code structure
Typical product code V23134
-J
0
052 -D642
Type
V23134 Power Relay F
Contact arrangement
J
1 form A, 1 NO
Cover
Coil
0
2
Standard
Bracket near terminal 86 ISO
1
Bracket at terminal 30 ISO
052
056
165
12VDC
053
065
24VDC
24VDC (contact gap >0.8mm)
24VDC (contact gap >0.8mm)
24VDC (contact gap >0.8mm)
Terminal/arrangement
D642 Plug-in/NO
Xnnn Customized (nnn: version number)
Production in Europe (only)
Product code
Arrangement Cover
Coil suppr.
Circuit1)
NO
NOR
NOD
NOR
NO
Coil Contact mat. Terminals Part number
V23134-J0052-D642
V23134-J0052-X429
V23134-J0052-X439
V23134-J0052-X455
V23134-J0052-X511
V23134-J0052-X4613)
V23134-J0053-D642
V23134-J0065-X4974)
V23134-J0165-X5372)3)
V23134-J1052-D642
V23134-J1052-X281
V23134-J1053-D642
V23134-J2165-X5382)3)
1 form A, 1 NO
Standard
12VDC
Silver based
Plug-in, QC
7-1393303-3
1-1414147-0
1-1414286-0
1-1414610-0
3-1415001-2
1-1414469-0
9-1393303-7
3-1414937-3
3-1904117-4
0-1393304-9
1-1393304-0
1-1393304-1
3-1904117-5
Resistor 680Ω
Diode (cathode 86)
Resistor 470Ω
PCB
Resistor 560Ω
NOR
NO
Plug-in, QC
24VDC
PCB
Plug-in, QC
Resistor 1200Ω
Resistor 560Ω
Resistor 1200Ω
NOR
NO
NOR
NO
Bracket
12VDC
24VDC
NOR
1) See terminal assignment diagrams.
2) Special feature: contact gap >0.8mm.
Other types on request.
3) Special feature: 14.5mm load terminals.
4) Packed in tray with 300 pcs. per unit.
This list represents the most common types and does not show all variants covered by this datasheet.
Production in Asia (only)
Product code
V23134-J0052-D642
V23134-J0052-X429
V23134-J0052-X439
V23134-J0052-X4613)
V23134-J0053-D642
Arrangement Cover
Coil suppr.
Circuit1) Coil
Contact mat. Terminals Part number
1 form A, 1 NO
Standard
NO
NOR
NOD
NOR
NO
12VDC
Silver based
Plug-in, QC
7-1904094-7
7-1904094-8
7-1904094-9
8-1904094-0
8-1904094-3
Resistor 680Ω
Diode (cathode 86)
Resistor 560Ω
24VDC
1) See terminal assignment diagrams.
2) Special feature: contact gap >0.8mm.
Other types on request.
3) Special feature: 14.5mm load terminals.
This list represents the most common types and does not show all variants covered by this datasheet.
3
03-2016, Rev. 0316
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog, product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2016 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
相关型号:
©2020 ICPDF网 联系我们和版权申明