55A0132 [TE]
This specification sheet forms a part of the latest issue of Raychem Specification 55A.;
| 型号： | 55A0132 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | This specification sheet forms a part of the latest issue of Raychem Specification 55A. |
| 文件： | 总1页 (文件大小：27K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SCD
Date
55A0131
Revision
SPECIFICATION CONTROL DRAWING
Title
THREE CONDUCTOR CABLE, UNSHIELDED, UNJACKETED,
GENERAL PURPOSE, 600 VOLT
2-12-16
D
This specification sheet forms a part of the latest issue of Raychem Specification 55A.
COMPONENT WIRES - 55A0111
CABLE CONSTRUCTION DETAILS
OUTSIDE DIAMETER
(inch)
CONDUCTOR
SIZE
MAXIMUM
WEIGHT
(lbs/1000 ft.)
PART NUMBER
1/
(AWG)
NOMINAL
.052
MAXIMUM
.056
55A0131-30-*
55A0131-28-*
55A0131-26-*
55A0131-24-*
55A0131-22-*
55A0131-20-*
55A0131-18-*
55A0131-16-*
55A0131-14-*
55A0131-12-*
30
28
26
24
22
20
18
16
14
12
2.0
2.8
.058
.063
.069
.073
4.3
.080
.084
6.1
.093
.097
8.6
.108
.112
13.2
19.9
25.4
39.8
60.3
.130
.134
.147
.151
.184
.190
.222
.229
CABLE RATINGS AND ADDITIONAL REQUIREMENTS
1/ PART NUMBER:
TEMPERATURE RATING: 150°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz
INSULATION FLAWS:
The "*" in the part numbers above shall be replaced by color
code designators with a slash separating the component wire
colors. Colors shown do not necessarily reflect the sequence
of manufacturing.
Spark Test, 5.7 kV (rms) at 3 kHz
Impulse Dielectric Test, 8.0 kV (peak)
Example: AWG 22, black, brown, and red component wires:
55A0131-22-0/1/2
NOTE: Nominal values are for information only. Nominal values are not requirements.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL
Page 1 of 1
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2009-2016 Tyco Electronics Corporation. All rights reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明