6001-0500C [TE]
6001 Series Delay On Operate Digital Timing Module Fixed Timing, Solid State Output; 6001系列延时上运行的数字定时模块固定时间,固态输出型号: | 6001-0500C |
厂家: | TE CONNECTIVITY |
描述: | 6001 Series Delay On Operate Digital Timing Module Fixed Timing, Solid State Output |
文件: | 总1页 (文件大小:55K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
6001 Series Delay On Operate Digital Timing Module
Fixed Timing, Solid State Output
Product Facts
■ Fixed delay on operate timer
■ 300mA output
■ CMOS digital design
■ Voltage surge protection
■ Qualified to MIL-R-83726/13
Electrical Specifications
Timing Range: 50 ms to 600 s.
Timing Accuracy: 10ꢀ of nominal
timing under all conditions of input
voltage and environmental extremes.
CII 6001 series delay on
operate timer modules are
miniature devices combining
solid state timing circuits with
solid state switch outputs in
robust hermetically sealed DIP
enclosures. The 1 Form A
(SPST-NO) switch is rated
300mA.
Part Numbering System
Typical Part Number
6001
–6002
C
Model Number:
6001 = Fixed timer, -55°C to +125°C
Recycle Characteristics:
Before Time Out: A power interruption
occuring after the start but before
completion of the timing cycle shall be
for a duration of 0.5ꢀ of the nominal
time delay or 10ms, whichever is
greater, to ensure a loss in timing of no
greater than 10ꢀ.
Timing Code:
Four-digit code for any value between 50ms and 600s.
The timing code consists of four digits and gives the time in ms. The first
three digits are the significant figures and the last digit is the number of zeros
following the significant figures; thus 50 ms would be coded 0500, 1.1 s
would read 1101, and 1 m (60 s) would be 6002.
Timing Diagram
Optional Suffix:
C = Commercial version equivalent to M83726/13.
After Time Out: A power interruption
of 0.5ꢀ of the nominal time delay or
10ms, whichever is greater, will initiate a
new timing cycle with a loss in timing of
no greater than 5ꢀ.
+28Vdc
INPUT
0Vdc
A typical part number would be 6001–6002C. This solid state output timing module
has a time delay of 60s at 28Vdc and is the commercial equivalent to M83726/13.
ON
< TIME DELAY >
LOAD
OFF
Input Data:
Input Voltage: 28Vdc, nominal;
range 18 to 31Vdc.
Current Drain (at 25°C, 28Vdc):
Environmental Specifications
Temperature Range:
-55°C to +125°C.
Outline Dimensions
10mA (max.), plus load current.
.920 MAX.
[23.375]
.58 MAX.
[14.7]
Reverse Polarity Protection:
The timer will not be damaged or operate
when input voltage polarity is reversed.
.06
[1.52]
Altitude: 80,000 ft.
Shock: 150 G’s, 11 1ms half-sine
wave.
.42 MAX.
[10.67]
Output Data:
Configuration: 1 Form A (SPST-NO)
solid state switch closure to ground.
.28
[7.11]
Vibration (sinusoidal): 10 -80 Hz. at
0.06 inch DA; 80 - 3,000 Hz. at 20 G’s.
.100 TYP.
[2.54]
.300
[7.62]
Load Ratings:
Resistive: 300mA @ +25°C, derated to
100mA @ +125°C.
Inductive: Three MIL-R-5757/9 relays
(any relay with 26.5Vdc coil).
Lamp Load: Two MS25237-327 lamps
per MIL-L-6363.
Sealing: MIL-STD-202, method 112,
condition C.
.018 DIA. TYP.
[14.7]
14 PINS GOLD PLATE PER
MIL-G-45204, TYPE II, CLASS I,
UNDERPLATING, NICKEL 50 TO
150 MICROINCHES THICK.
3 TERMINALS FOR
Materials:
Cover: Nickel.
Header: Kovar.
Pins: Kovar, gold plated.
COLORED BEAD
Load Suppression: Suppression for
inductive loads for output protection is
provided within the unit.
Marking: Per MIL-R-83726.
Weight: 0.42 oz (12g) max.
CIRCUIT CONNECTIONS
Voltage Drop: 2.5Vdc, max. @ -55°C
and +25°C; 2.0 Vdc, max., @ +125°C.
Wiring Diagram
Leakage Current: 1µA, max. @
+25°C, 10µA, max. @ +125°C.
+
LOAD
–
Insulation Resistance: 1,000
megohms, min., @ 500Vdc, measured
between all terminals tied together to the
case.
B+
B–
–
+
INPUT
PIN 10 IS ACTIVE. DO NOT CONNECT.
Dielectric Strength: 500Vrms, 60 Hz.,
at sea level, measured between all
terminals tied together to the case.
Special Notes:
• Load is connected between B+ and terminal designated. Delay begins upon
application of power to terminals (B+ and B–).
Transients:
Voltage Surge: Per MIL-STD-704A,
figure 9, limit 1, for category B
equipment.
• Always consult latest military specification for changes and additional information.
Self-generated Spikes: 10V.
© 2005 by Tyco Electronics Corporation. All Rights Reserved.
CII and TYCO are trademarks.
Other products and company names mentioned herein may be trademarks of their respective owners.
1
Catalog 8-1773439-2
Revised 4-05
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
相关型号:
600111FUL-0000
compact unit allows it to be used with the majority of detectors to provide convenient remote indication.
ETC
600112FUL-0000
compact unit allows it to be used with the majority of detectors to provide convenient remote indication.
ETC
©2020 ICPDF网 联系我们和版权申明