B-040-20-N [TE]
SPECIFICATION CONTROL DRAWING; 规格控制图
| 型号： | B-040-20-N |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | SPECIFICATION CONTROL DRAWING |
| 文件： | 总1页 (文件大小：110K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SPECIFICATION CONTROL DRAWING
Product Revision
Product
Component Dimensions
“GA”
Wire Gauge
Cable Dimensions
L
øA
øB
øC
øD
øE
øF
G±0.5
M±0.5
Name
max
min
min
min
(AWG)
min
(G±0.02) (M±0.02)
B-040-20-N
B-040-22-N
B-040-24-N
B-040-26-N
B-040-28-N
B-040-30-N
D
D
D
D
D
D
20
22
24
26
28
30
1.70
(0.065)
to
4.40
(0.175)
1.50
(0.060)
to
2.80
(0.110)
30.0
4.40
2.80
1.60
0.30
(0.012)
16.0
(0.630)
6.0
(0.235)
(1.180) (0.175) (0.110) (0.060)
MATERIALS
1. & 5. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.
2. & 4. SOLDER PREFORMS WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX:
TYPE ROL1 per ANSI J-STD-004.
3. & 6. MELTABLE RINGS: Thermally stabilized thermoplastic.
7. CONDUCTOR LEAD: MIL-W-22759/32-GA-9, AWG “GA” (see table). ETFE insulated, stranded tin plated copper.
Color: white.
8. GROUND LEAD: MIL-W-22759/32-GA-6, AWG “GA” (see table). ETFE insulated, stranded tin plated copper.
Color: blue.
APPLICATION
1. The parts covered by this SCD are for use in terminating the primary conductor and the braided shield of a coaxial cable
having tin or silver plated conductor and shield, rated for at least 125° C and meeting the dimensional requirements listed.
2. Parts will meet the requirements of Raychem Specification RT-1404 when installed per Raychem RPIP-500-03.
3. Temperature range: -55°C to +150°C.
For best results, prepare
the cable as shown:
TITLE:
TE Connectivity
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
COAXIAL SOLDERSLEEVE DEVICE
WITH PRE-INSTALLED STRANDED WIRES
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: B-040-GA-N
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
DOC ISSUE:
15-Apr-11
3
ROUGHNESS IN
MICRON
0 N/A
DRAWN BY:
REPLACES:
DCR NUMBER:
PROD. REV.
SCALE:
SIZE:
SHEET:
M. FORONDA
D000433
D000581
SEE TABLE
None
A
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
相关型号：
©2020 ICPDF网 联系我们和版权申明