IM06CGR [TE]
The Best Relaytion; 最佳Relaytion
| 型号： | IM06CGR |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | The Best Relaytion |
| 文件： | 总10页 (文件大小：581K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The Best Relaytion
IM Relay
IM Relay
Slim line AND low profile
2 pole telecom/signal relay, polarized
Through Hole Types (THT), standard version
with 5.08 mm, narrow version with 3.2 mm between
the terminal rows
or
Surface Mount Type (SMT)
Relay types:
non-latching with 1 coil
latching with 1 coil
Features
-
-
-
-
-
-
-
-
Telecom/signal relay (dry circuit, test access, ringing)
Slim line10 x 6 mm, 0.39 x 0.24 inch
Low profile 5.65 mm, 0.222 inch
Minimum board-space 60 mm2
Switching current 2 A
2 changeover contacts (2 form C / DPDT)
Bifurcated contacts, gold plated
High sensitivity results in low nominal power consumption
140 mW for non latching
100 mW for latching version
-
-
High surge capability (1.2/50 µs and 10/700 µs) meets
Bellcore GR 1089, FCC Part 68 and ITU-T K20
³1500 V between open contacts
³ 2500 V between coil and contacts
High mechanical shock resistance
up to 300 G functional
up to 500 G survival
Typical applications:
-
Communications equipment
Linecard application – analog, ISDN, xDSL,
PABX
Voice over IP
-
-
-
Office and business equipment
Measurement and control equipment
Consumer electronics
Set top boxes, HiFi
CSA-C22.2 No. 14-95 File No. 169679-1079886
CSA-C22.2 No. 950-95
-
Medical equipment
Options:
UL 508 File No. E111441
UL 1950 3rd ed.
Surge capability ³ 2500 V between open contacts
CECC 16501-003
Insulation category:
Supplementary insulation according IEC/EN 60950 and UL 1950
Working voltage
£ 300 Vrms
SMT: 250 Vrms
THT: 200 Vrms
2500 V
QC 160501-CH0001
Mains supply voltage
IEC/EN60950 IEC Ref. Cert. No. 1176
Repetitive peak voltage
Pollution degree:
External:
Internal:
V-0
2
1
Flammability classification:
Maximum operating temperature: 85°C
IM Relay
Dimensions
IM THT
IM THT
Narrow
IM SMT
IM SMT
J-Legs
Standard
Gull Wings
mm
inch
mm
inch
mm
inch
L
10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003
W
H
T
6 ±0.08 0.236 ±0.003 5.7 ±0.3 0.224 ±0.012 6 ±0.08
0.236 ±0.003 6 ±0.08 0.236 ±0.003
5.65 -0.2 0.222 -0.008 5.85 -0.15 0.230 -0.006 5.65 -0.2
0.222 -0.008 5.65 -0.2 0.222 -0.008
3.2
0.125
N/A
3.2
N/A
0.125
N/A
N/A
N/A
N/A
N/A
T1 N/A
7.5 ±0.3
0.295 ±0.011 2.8 ±0.2 0.110 ±0.007
T2 5.08±0.1 0.200 ±0.004 3.2±0.1
0.126 ±0.006 5.08 ±0.1 0.200 ±0.004 5.08 ±0.1 0.200 ±0.004
D1 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006
D2 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006
Tw 0.4
S
0.015
0.4
0.015
0.4
0.015
N/A
0.4
N/A
0.015
N/A
0.3 ±0.05 0.011 ±0.002 0.3 ±0.05 0.011 ±0.002 N/A
THT Version
SMT Version
Standard version
Narrow version
Gull Wings
J Legs
Mounting hole layout
Solder pad layout
View onto the component side of the PCB
(top view)
View onto the component side of the PCB
(top view)
Standard version
Narrow version
Gull Wings
J Legs
Ø min. 0.75
Terminal assignment
Relay - top view
Non-latching type,
not energized condition
Latching type, 1 coil
reset condition
3
IM Relay
Coil Data (values at 23°C)
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Nominal power
consumption
Resistance
Relay code
Minimum
Maximum
voltage UI
voltage UII
Vdc
Vdc
Vdc
Vdc
mW
W / ± 10 %
non-latching
1 coil
1.5
3
1.13
2.1
3.4
6.8
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
IM00
IM01
IM02
IM03
IM04
IM05
IM06
IM07
4.5
5
3.15
3.5
10.3
11.4
13.7
20.4
27.3
45.6
145
178
257
574
1028
2880
6
9
12
24
4.2
6.3
8.4
16.8
latching
1 coil
1.5
3
1.13
2.25
3.38
3.75
4.5
6.75
9.00
18.00
4.1
8.1
- 1.13
- 2.25
- 3.38
- 3.75
- 4.50
- 6.75
- 9.00
- 18.00
100
100
100
100
100
100
100
200
23
90
IM40
IM41
IM42
IM43
IM44
IM45
IM46
IM47
4.5
5
12.1
13.5
16.2
24.2
32.3
41.9
203
250
360
810
1440
2880
6
9
12
24
Further coil versions are available on request.
UI =
UII
Minimum voltage at 23° C after pre-energizing
with nominal voltage without contact current
Maximum continous voltage at 23°
=
The operating voltage limits UI and UII depend on
the temperature according to the formula:
UI tamb
=
KI · UI
and
23° C
UII tamb
tamb
=
KIl · UIl 23° C
= Ambient temperature
UI tamb
UII tamb
kI, kII
= Minimum voltage at ambient temperature, tamb
= Maximum voltage at ambient temperature, tamb
= Factors (dependent on temperature), see diagram
Ambient temperature tamb [°C]
4
IM Relay
Contact Data
Number of contacts and type
Contact assembly
2 changeover contacts
Bifurcated contacts
Contact material
Palladium-ruthenium, gold-covered
Limiting continuous current at max. ambient temperature
Maximum switching current
Maximum swichting voltage
2 A
2 A
220 Vdc
250 Vac
60 W, 62.5 VA
< 10 mV
Maximum switching capacity
Thermoelectric potential
Initial contact resistance / measuring condition: 10 mA / 20 mV
Electrical endurance at contact application 0
(£ 30 mV / £ 10 mA)
< 50 mW
min. 2.5 x 106 operations
min. 2.0 x 106 operations
min. 5 x 105 operations
min. 1 x 105 operations
min. 1 x 105 operations
min. 5 x 105 operations
min. 1 x 105 operations
typ. 108 operations
30 Vdc / 2 A
cable load open end
Resistive load
at 125Vdc / 0.24 A - 30 W
at 220 Vdc / 0.27 A - 60 W
at 250 Vac / 0.25 A - 62.5 VA
at 30 Vdc / 1 A - 30 W
at 30 Vdc / 2 A - 60 W
Mechanical endurance
UL/CSA ratings
220 Vdc / 0.27 A
120 Vdc / 0.5 A
250 Vac / 0.25 A
Standard Version
> 109 W
High Dielectric Version
> 109 W
Insulation
Insulation resistance at 500 VDC
Dielectric test voltage (1 min)
between coil and contacts
between adjacent contact sets
between open contacts
1800 Vrms
1000 Vrms
1000 Vrms
1800 Vrms
1800 Vrms
1500 Vrms
Surge voltage resistance
according to Bellcore TR-NWT-001089 (2 / 10 ms)
between coil and contacts
between adjacent contact sets
between open contacts
2500 V
1500 V
1500 V
2500 V
2500 V
2500 V
according to FCC 68 (10 / 160 ms)
between coil and contacts
between adjacent contact sets
between open contacts
2500 V
1500 V
1500 V
2500 V
2500 V
2500 V
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 2 pF
max. 2 pF
max. 1 pF
RF Characteristics
Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz
- 37.0 dB / - 18.8 dB
- 0.03 dB / - 0.33 dB
1.06 / 1.49
* High Dielectric Version „C“
5
IM Relay
General data
Operate time at Unom typ. / max.
1 ms / 3 ms
1 ms /3 ms
1 ms / 3 ms
3 ms / 5 ms
1 ms / 5 ms
50 operations/s
-40° C ... +85° C
< 150 K/W
Reset time (latching) at Unom , typ. / max.
Release time without diode in parallel (non-latching), typ. / max.
Release time with diode in parallel (non-latching), typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
125° C
20 G
10 to 1000 Hz
Shock resistance, half sinus, 11 ms
half sinus, 0.5 ms
Degree of protection
Needle flame test
50 G (function)
500 G (damage)
immersion cleanable, IP 67
application time 20 s, no burning and glowing
any
Mounting position
Processing information
Weight (mass)
Ultrasonic cleaning is not recommended
max. 0.75 g
Resistance to soldering heat
260° C / 10 s
All data refers to 23° C unless otherwise specified.
Recommended soldering conditions
Soldering conditions according CECC 00802
10 sec
20 - 40 sec
Full line:
typical
Dotted line: process limits
max. 245° C
215° C
215° C
ca. 40 sec
180° C
180° C
130° C
external preheating
100° C
130° C
forced
cooling
Full line:
typical
Dotted line: process limits
Time (s)
Time (s)
Vapor Phase Soldering: Temperature/Time Profile
(Lead Temperature)
Infrared Soldering: Temperature/Time Profile
(Lead Temperature)
6
IM Relay
Dimensions in mm
Packing
Tube for THT version - 50 relays per tube, 1000 relays per box
Tape and reel for SMT version - 1’000 relays / reel, 1’000 or 5’000 relays / box
Reel dimension
7
IM Relay
Ordering Information
Relay Code
Tyco
Part Number
Relay Code
Tyco
Part Number
IM00GR
IM00JR
IM00TS
IM00NS
IM01GR
IM01CGR
IM01JR
IM01TS
IM01NS
IM02GR
IM02CGR
IM02JR
IM02TS
IM02NS
IM03GR
IM03CGR
IM03JR
IM03TS
IM03NS
IM04GR
IM04JR
IM04TS
IM04NS
IM05GR
IM05CGR
IM05JR
IM05TS
IM05NS
IM06GR
IM06CGR
IM06JR
IM06TS
IM06NS
IM07GR
IM07JR
3-1462037-7
3-1462037-9
3-1462037-5
1-1462038-0
0-1462037-1
0-1462038-4
4-1462037-0
0-1462037-4
1-1462038-1
0-1462037-9
0-1462038-1
1-1462037-1
1-1462037-3
1-1462038-2
1-1462037-4
0-1462038-2
1-1462037-6
1-1462037-8
1-1462038-3
4-1462037-2
4-1462037-4
4-1462037-1
1-1462038-4
3-1462037-4
0-1462038-3
4-1462037-5
2-1462037-2
1-1462038-5
2-1462037-3
9-1462037-9
4-1462037-6
2-1462037-7
1-1462038-6
4-1462037-7
4-1462037-8
IM07TS
IM07NS
IM40GR
IM40JR
IM40TS
IM40NS
IM41GR
IM41JR
IM41TS
IM41NS
IM42GR
IM42JR
IM42TS
IM42NS
IM43GR
IM43JR
IM43TS
IM43NS
IM44GR
IM44JR
IM44TS
IM44NS
IM45GR
IM45JR
IM45TS
IM45NS
IM46GR
IM46JR
IM46TS
IM46NS
IM47GR
IM47JR
IM47TS
IM47NS
3-1462037-0
1-1462038-7
5-1462037-1
5-1462037-2
5-1462037-0
1-1462038-8
5-1462037-4
5-1462037-5
5-1462037-3
1-1462038-9
3-1462037-1
5-1462037-7
5-1462037-6
2-1462038-0
5-1462037-9
6-1462037-0
5-1462037-8
2-1462038-1
6-1462037-2
6-1462037-3
6-1462037-1
2-1462038-2
6-1462037-4
6-1462037-5
3-1462037-2
2-1462038-3
6-1462037-7
6-1462037-8
6-1462037-6
2-1462038-4
7-1462037-0
7-1462037-1
6-1462037-9
2-1462038-5
8
IM Relay
requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both
and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)
the MT4 only.
IM Relays
4th generation slim line – low profile polarized 2 c/o telecom relay with
bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption
of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is
available as through hole and surface mount type (J-Legs and Gull
Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV –
2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM is CECC/
IECQ approved and certified in accordance with IEC/EN 60950 and
UL1950. Dimensions approx. 10 x 6 mm board space and 5.65 mm
height.
Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,
MT4 approx. 20 x15 mm board space and 11 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other
applications. Nominal voltage range from 3 ... 48 V, coil power
consumption from 150 .... 500 mW. The D2n relay is capable to switch
currents up to 3 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
20 x10 mm board space and 11,5 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 24 V, coil power consumption 140 mW,
latching relays with 1 coil 70 mW. The P2 relay is available as through
hole or surface mount type and capable to switch currents up to 5 A.
Dielectric strength fulfills the Bellcore requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay
with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power
consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay
is available as through hole or surface mount type and capable to
switch currents up to 1 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for
SMT version.
FX Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260ꢀmW for the
high sensitive version, 140... 300 mW for the standard version,
latching relays with 1 coil 100 mW. The FX2 relay is available as
through hole type and capable to switch loads up to 60 W/62,5 VA.
Dielectric strength fulfills the Bellcore requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The
FX2 is CECC/IECQ approved and certified in accordance with IEC/EN
60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space
and 10,7 mm height.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW,
sensitive versions 200 mW. The W11 relay is capable to switch
currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.
15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other
applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal
voltage range from 5 ... 24 V, coil power consumption 50...280 mW
for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays
are available in DIP or SIL housing and capable to switch currents up to
0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric
strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and
5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm
height for SIL version.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with
bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power
consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as
through hole and surface mount type. Dielectric strength fulfills the
Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and
FCC part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ
approved and certified in accordance with IEC/EN 60950 and
UL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm
height.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various
signal switching applications. Available as non polarized, polarized /
latching and relay with AC coil. The benefit is the possibility of
combining various contact sets from 1 up to 6 poles, single and
bifurcated contacts, different contact materials with a coil voltage
range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust
protected and hermetically sealed versions, with plug in or solder
terminals and are capable to switch currents up to 5 A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms.
Dimensions from approx. 19 x 24 to 19x35 mm board space and
30 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 48 V, coil power consumption of 80 ...
260ꢀmW for the high sensitive version, 140... 300 mW for the
standard version, latching relays with 1 coil 100 mW.. The FP2 relay is
available as through hole type and capable to switch loads up to
30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /
160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.
14 x 9 mm board space and 5 mm height.
Other Relays
We offer a variety of different relay families for maintenance and
replacement purposes. These relays are up to 60 years old now, such
as Card Relay SN (V23030 / V23031 series), Small General Purpose
Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and
V23163 ... V23167 series). Accessories like sockets, hold down
springs, etc. optional.
MT2 / MT4
2nd generation non polarized, non latching 2 c/o and 4 c/o telecom
and signal relay with bifurcated contacts. Nominal voltage range from
4.5 ... 48 V, coil power consumption 150/200/300/400 and
550 mW, and 300 mW (MT4). Dielectric strength fulfills the
9
Tyco Electronics AXICOM Ltd.
Seestrasse 295 - P.O. Box 220
CH-8804 Au-Wädenswil / Switzerland
Phone +41 1 782 9111
Fax +41 1 782 9080
E-mail: axicom@tycoelectronics.com
Tyco Electronics AMP GmbH
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38260
Fax +49 30 386 38569
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752
10
相关型号：
©2020 ICPDF网 联系我们和版权申明