IM46TS [TE]
The Best Relaytion; 最佳Relaytion型号: | IM46TS |
厂家: | TE CONNECTIVITY |
描述: | The Best Relaytion |
文件: | 总11页 (文件大小:798K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The Best Relaytion
IM Relay
108-98001
Rev. D
EC-JM00-0009-03
ECOC: JM10
1. Apr. 04
IM Relay
Slim line AND low profile
2 pole telecom/signal relay, polarized
Through Hole Types (THT), standard version
with 5.08 mm, narrow version with 3.2 mm between
the terminal rows
or
Surface Mount Type (SMT)
Relay types:
Features
non-latching with 1 coil
latching with 1 coil
-
-
-
-
-
-
-
-
Telecom/signal relay (dry circuit, test access, ringing)
Slim line10 x 6 mm, 0.39 x 0.24 inch
Low profile 5.65 mm, 0.222 inch
Minimum board-space 60 mm2
Switching current 2 A
2 changeover contacts (2 form C / DPDT)
Bifurcated contacts, gold plated
High sensitivity results in low nominal power consumption
140 mW for non latching standard
100 mW for latching version and non latching high sensitive
version
-
-
High surge capability (1.2/50 µs and 10/700 µs) meets
Bellcore GR 1089, FCC Part 68 and ITU-T K20, 21, 45
³1500 V between open contacts
³ 2500 V between coil and contacts
High mechanical shock resistance
up to 300 G functional
up to 500 G survival
Typical applications:
-
Communications equipment
Linecard application – analog, ISDN, xDSL,
PABX
Voice over IP
-
-
-
Office and business equipment
Measurement and control equipment
UL 508
UL 60950
File No. E111441
Consumer electronics
Set top boxes, HiFi
-
Medical equipment
Options:
CECC 61811-51:01
(QC 160501)
Surge capability ³ 2500 V between open contacts
IEC/EN60950
IEC Ref. Cert. No. 2170
European Directive conformance:
Insulation category:
Supplementary insulation according IEC/EN 60950
IM relay product conformance according to:
Working voltage
Mains supply voltage
£ 300 Vrms
SMT: 250 Vrms
THT: 200 Vrms
2500 V
External:
Internal:
V-0
-
-
Directive 2000/53/EC: ELV (End of Life of Vehicles)
Directive 2002/95/EC: ROHS (Restrictions of the
use of certain hazardous substances in electrical and
electronic equipment)
Repetitive peak voltage
Pollution degree:
2
1
Compliance is evidenced by written declaration from all raw
material suppliers.
Tyco Electronics AXICOM only has responsibility for the proper
processing of these materials.
Flammability classification:
Maximum operating temperature: 85°C
Confirmation is valid for date codes ≥ 0438
Page 2 (11)
108-98001 Rev. D
IM Relay
Dimensions
IM THT
IM THT
Narrow
IM SMT
IM SMT
J-Legs
Standard
Gull Wings
mm
inch
mm
inch
mm
inch
L
10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003
W
H
T
6 ±0.08 0.236 ±0.003 5.7 ±0.3 0.224 ±0.012 6 ±0.08
0.236 ±0.003 6 ±0.08 0.236 ±0.003
5.65 -0.2 0.222 -0.008 5.85 -0.15 0.230 -0.006 5.65 -0.2
0.222 -0.008 5.65 -0.2 0.222 -0.008
3.2
0.125
N/A
3.2
N/A
0.125
N/A
N/A
7.5 ±0.3
N/A
N/A
N/A
T1 N/A
0.295 ±0.011 2.8 ±0.2 0.110 ±0.007
T2 5.08±0.1 0.200 ±0.004 3.2±0.1
0.126 ±0.006 5.08 ±0.1 0.200 ±0.004 5.08 ±0.1 0.200 ±0.004
D1 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006
D2 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006
Tw 0.4
0.015
0.4
0.015
0.4
0.015
N/A
0.4
N/A
0.015
N/A
S
0.3 ±0.05 0.011 ±0.002 0.3 ±0.05 0.011 ±0.002 N/A
THT Version
SMT Version
Standard version
Narrow version
Gull Wings
J Legs
Mounting hole layout
View onto the component side of the PCB
(top view)
Solder pad layout
View onto the component side of the PCB
(top view)
Standard version
Narrow version
Gull Wings
J Legs
Ø min. 0.75
Terminal assignment
Relay Code
Relay - top view
Non-latching type,
not energized condition
Latching type, 1 coil
reset condition
Page 3 (11)
108-98001 Rev. D
IM Relay
Coil Data (values at 23°C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin voltage Umax
Vdc Vdc
Maximum
Vdc
Vdc
mW
Ω / ± 10 %
THT Standard non-latching 1 coil
1.5
3
4.5
5
6
9
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
3.6
7.2
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
IM00TS
IM01TS
IM02TS
IM03TS
IM04TS
IM05TS
IM06TS
IM07TS
3-1462037-5
0-1462037-4
1-1462037-3
1-1462037-8
4-1462037-1
2-1462037-2
2-1462037-7
3-1462037-0
10.8
12.1
14.5
21.7
28.9
48.5
145
178
257
574
1028
2880
12
24
THT Narrow non-latching 1 coil
1.5
3
4.5
5
6
9
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
3.6
7.2
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
IM00NS
IM01NS
IM02NS
IM03NS
IM04NS
IM05NS
IM06NS
IM07NS
1-1462038-0
1-1462038-1
1-1462038-2
1-1462038-3
1-1462038-4
1-1462038-5
1-1462038-6
1-1462038-7
10.8
12.1
14.5
21.7
28.9
48.5
145
178
257
574
1028
2880
12
24
SMT J-Legs non-latching 1 coil
1.5
3
4.5
5
6
9
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
3.6
7.2
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
IM00JR
IM01JR
IM02JR
IM03JR
IM04JR
IM05JR
IM06JR
IM07JR
3-1462037-9
4-1462037-0
1-1462037-1
1-1462037-6
4-1462037-4
4-1462037-5
4-1462037-6
4-1462037-8
10.8
12.1
14.5
21.7
28.9
48.5
145
178
257
574
1028
2880
12
24
SMT Gull Wings non-latching 1 coil
1.5
3
4.5
5
6
9
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
3.6
7.2
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
IM00GR
IM01GR
IM02GR
IM03GR
IM04GR
IM05GR
IM06GR
IM07GR
3-1462037-7
0-1462037-1
0-1462037-9
1-1462037-4
4-1462037-2
3-1462037-4
2-1462037-3
4-1462037-7
10.8
12.1
14.5
21.7
28.9
48.5
145
178
257
574
1028
2880
12
24
High Dielectric Version
SMT Gull Wings non-latching 1 coil
3
4.5
5
9
12
24
2.25
3.38
3.75
6.75
9.00
18.00
7.2
10.8
12.1
21.7
28.9
48.5
0.30
0.45
0.50
0.90
1.20
2.40
140
140
140
140
140
200
64
145
178
574
1028
2880
IM01CGR
IM02CGR
IM03CGR
IM05CGR
IM06CGR
IM07CGR
0-1462038-4
0-1462038-1
0-1462038-2
0-1462038-3
9-1462037-9
0-1462039-2
High Current Version
SMT Gull Wings non-latching 1 coil
4.5
5
3.38
3.75
10.8
12.1
0.45
0.50
140
140
145
178
IM02DGR
IM03DGR
9-1462038-8
9-1462038-9
Further coil versions are available on request.
Page 4 (11)
108-98001 Rev. D
IM Relay
Coil Data (values at 23°C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin voltage Umax
Vdc Vdc
Maximum
Vdc
Vdc
mW
Ω / ± 10 %
High Sensitive Version
SMT Gull Wings non-latching 1 coil
3
4.5
5
12
24
2.40
3.60
4.00
9.60
19.20
8.7
13.1
14.6
35.0
57.8
0.30
0.45
0.50
1.20
2.40
100
100
100
110
140
91
194
238
1315
4120
IM11GR
IM12GR
IM13GR
IM16GR
IM17GR
9-1462038-5
0-1462039-3
0-1462039-4
0-1462039-5
0-1462039-6
THT Standard latching 1 coil
1.5
3
4.5
5
6
9
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
4.3
8.6
-1.13
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
100
200
23
90
IM40TS
IM41TS
IM42TS
IM43TS
IM44TS
IM45TS
IM46TS
IM47TS
5-1462037-0
5-1462037-3
5-1462037-6
5-1462037-8
6-1462037-1
3-1462037-2
6-1462037-6
6-1462037-9
12.9
14.3
17.1
25.7
34.3
48.5
203
250
380
810
1440
2880
12
24
THT Narrow latching 1 coil
1.5
3
4.5
5
6
9
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
4.3
8.6
-1.13
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
100
200
23
90
IM40NS
IM41NS
IM42NS
IM43NS
IM44NS
IM45NS
IM46NS
IM47NS
1-1462038-8
1-1462038-9
2-1462038-0
2-1462038-1
2-1462038-2
2-1462038-3
2-1462038-4
2-1462038-5
12.9
14.3
17.1
25.7
34.3
48.5
203
250
380
810
1440
2880
12
24
SMT J-Legs latching 1 coil
1.5
3
4.5
5
6
9
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
4.3
8.6
-1.13
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
100
200
23
90
IM40JR
IM41JR
IM42JR
IM43JR
IM44JR
IM45JR
IM46JR
IM47JR
5-1462037-2
5-1462037-5
5-1462037-7
6-1462037-0
6-1462037-3
6-1462037-5
6-1462037-8
7-1462037-1
12.9
14.3
17.1
25.7
34.3
48.5
203
250
380
810
1440
2880
12
24
SMT Gull Wings latching 1 coil
1.5
3
4.5
5
6
9
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
4.3
8.6
-1.13
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
100
200
23
90
IM40GR
IM41GR
IM42GR
IM43GR
IM44GR
IM45GR
IM46GR
IM47GR
5-1462037-1
5-1462037-4
3-1462037-1
5-1462037-9
6-1462037-2
6-1462037-4
6-1462037-7
7-1462037-0
12.9
14.3
17.1
25.7
34.3
48.5
203
250
380
810
1440
2880
12
24
High Dielectric Version
SMT Gull Wings latching 1 coil
5
3.75
14.3
-3.75
100
250
IM43CGR
9-1462038-7
Page 5 (11)
108-98001 Rev. D
IM Relay
Coil operating range
3.4
3.2
3
3.4
3.2
3
110 mW
200 mW
140 mW
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
2.8
2.6
2.4
2.2
2
2.8
2.6
2.4
2.2
2
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
1.8
1.6
1.4
1.2
1
1.8
1.6
Umax. at 0 A
1.4
1.2
Unom. nominal coil voltage
1
0.8
0.6
0.4
0.2
0
Unom. nominal coil voltage
0.8
0.6
0.4
0.2
0
Uop. min.
Urel. min.
Uop. min.
Urel. min.
-40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90 100 110 120
-60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
Ambient Temperature [°C]
200 mW Latching
100 mW Latching
Unom
Umax.
=
=
Nominal coil voltage
3.4
3.2
3
Umax. - 5 % coil duty at 2 x 2 A (100 mW)
Upper limit of the operative range of
the coil voltage (limiting voltage) when coils are
continously energized
2.8
2.6
2.4
2.2
2
Umax. - 100 % coil duty at 0 A (100 mW)
Umax. - 100 % coil duty at 0 A (200 mW)
Uop. min.
=
=
Lower limit of the operative range of
the coil voltage (reliable operate voltage)
1.8
1.6
1.4
1.2
1
Umax. - 5 % coil duty at 0 A (100 mW)
Umax. - 5 % coil duty at 0 A (200 mW)
Urel. min.
Lower limit of the operative range of
the coil voltage (reliable release voltage)
Unom. nominal coil voltage
0.8
0.6
0.4
0.2
0
Uset min.
Umax. - 5 % coil duty at 2 x 1 A (100 mW)
-60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
Max. DC load breaking capacity
DC current [A]
Page 6 (12)
108-98001 Rev. D
IM Relay
Contact Data
Number of contacts and type
2 changeover contacts
Contact assembly
Bifurcated contacts
Contact material
Palladium-ruthenium, gold-covered
Limiting continuous current at max. ambient temperature
Maximum switching current
Maximum swichting voltage
2 A
2 A
220 Vdc
250 Vac
60 W, 62.5 VA
< 10 mV
Maximum switching capacity
Thermoelectric potential
Minimum switching voltage
100 mV
Initial contact resistance / measuring condition: 10 mA / 20 mV
Electrical endurance at contact application 0
(£ 30 mV / £ 10 mA)
< 50 mW
min. 2.5 x 106 operations
min. 2.0 x 106 operations
min. 5 x 105 operations
min. 1 x 105 operations
min. 1 x 105 operations
min. 5 x 105 operations
min. 1 x 105 operations
typ. 108 operations
cable load open end
Resistive load
at 125Vdc / 0.24 A - 30 W
at 220 Vdc / 0.27 A - 60 W
at 250 Vac / 0.25 A - 62.5 VA
at 30 Vdc / 1 A - 30 W
at 30 Vdc / 2 A - 60 W
Mechanical endurance
UL contact ratings
220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
Standard Version
> 109 W
High Dielectric Version
> 109 W
Insulation
Insulation resistance at 500 VDC
Dielectric test voltage (1 min)
between coil and contacts
between adjacent contact sets
between open contacts
1800 Vrms
1000 Vrms
1000 Vrms
1800 Vrms
1800 Vrms
1500 Vrms
Surge voltage resistance
according to Bellcore TR-NWT-001089 (2 / 10 ms)
between coil and contacts
2500 V
1500 V
1500 V
2500 V
2500 V
2500 V
between adjacent contact sets
between open contacts
according to FCC 68 (10 / 160 ms)
between coil and contacts
2500 V
1500 V
1500 V
2500 V
2500 V
2500 V
between adjacent contact sets
between open contacts
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 2 pF
max. 2 pF
max. 1 pF
RF Characteristics
Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz
- 37.0 dB / - 18.8 dB
- 0.03 dB / - 0.33 dB
1.06 / 1.49
* High Dielectric Version „C“
Page 7 (12)
108-98001 Rev. D
IM Relay
General data
1 ms / 3 ms
Operate time at Unom typ. / max.
1 ms /3 ms
Reset time (latching) at Unom , typ. / max.
Release time without diode in parallel (non-latching), typ. / max.
Release time with diode in parallel (non-latching), typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
1 ms / 3 ms
3 ms / 5 ms
1 ms / 5 ms
50 operations/s
-40° C ... +85° C
< 150 K/W
Thermal resistance
125° C
Maximum permissible coil temperature
Vibration resistance (function)
20 G
10 to 1000 Hz
50 G (function)
Shock resistance, half sinus, 11 ms
half sinus, 0.5 ms
500 G (damage)
immersion cleanable, IP 67 / RT V
Degree of protection / Environmental protection
Needle flame test
application time 20 s, no burning and glowing
any
Mounting position
Ultrasonic cleaning is not recommended
Processing information
max. 0.75 g
NiPdAu
Weight (mass)
Terminal surface
MSL 3
Moisture sensitive level (JEDEC J-STD-020B)
Resistance to soldering heat
260° C / 10 s
All data refers to 23° C unless otherwise specified.
Recommended soldering conditions
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020B
Recommended reflow soldering profile
Full line:
typical
20 - 40 sec
Dotted line: process limits
240° C
180° C
130° C
100° C
forced
cooling
Time (s)
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Time (s)
Vapor Phase Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Resistance to soldering heat - Reflow profile
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Time (s)
Page 8 (11)
108-98001 Rev. D
IM Relay
Dimensions in mm
Packing
Tube for THT version - 50 relays per tube, 1000 relays per box
Tape and reel for SMT version - 1’000 relays / reel, 1’000 or 5’000 relays / box
Reel dimension
Page 9 (11)
108-98001 Rev. D
IM Relay
IM Relays
D2n Relays
4th generation slim line – low profile polarized 2 c/o telecom relay with
bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption
of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay
is available as through hole and surface mount type (J-Legs and Gull
Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is
CECC/IECQ approved and certified in accordance with IEC/EN 60950
and UL1950. Dimensions approx. 10 x 6 mm board space and
5.65 mm height.
2nd generation non polarized 2 c/o relay for telecom and various
other applications. Nominal voltage range from 3 ... 48 V, coil power
consumption from 150 .... 500 mW. The D2n relay is capable to
switch currents up to 3 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
20 x10 mm board space and 11,5 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for
a wide range of applications, available as non latching or latching relay
with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power
consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay
is available as through hole or surface mount type and capable to
switch currents up to 1 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for
SMT version.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 24 V, coil power consumption 140 mW,
latching relays with 1 coil 70 mW. The P2 Relay is available as through
hole or surface mount type and capable to switch currents up to 5
A. Dielectric strength fulfills the Bellcore requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW,
sensitive versions 200 mW. The W11 relay is capable to switch
currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.
15,6 x 10,6 mm board space and 11,5 mm height.
FX Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching Reed Relays
relays with 1 coil 100 mW. The FX2 relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/
IECQ approved and certified in accordance with IEC/EN 60950 and
UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm
height.
High sensitive, non polarized relay for telecom and various other
applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal
voltage range from 5 ... 24 V, coil power consumption 50...280 mW
for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays
are available in DIP or SIL housing and capable to switch currents up to
0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric
strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and
5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm
height for SIL version.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with
bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power
consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as
through hole and surface mount type. Dielectric strength fulfills the
Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved
and certified in accordance with IEC/EN 60950 and UL1950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various
signal switching applications. Available as non polarized, polarized
/ latching and relay with AC coil. The benefit is the possibility of
combining various contact sets from 1 up to 6 poles, single and
bifurcated contacts, different contact materials with a coil voltage
range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust
protected and hermetically sealed versions, with plug in or solder
terminals and are capable to switch currents up to 5 A. Forcibly
guided (linked) contact sets optional. Dielectric strength 500 Vrms.
Dimensions from approx. 19 x 24 to 19x35 mm board space and
30 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW
for the high sensitive version, 140... 300 mW for the standard version,
latching relays with 1 coil 100 mW.. The FP2 Relay is available as
through hole type and capable to switch loads up to
Other Relays
We offer a variety of different relay families for maintenance and
replacement purposes. These relays are up to 60 years old now, such
as Card Relay SN (V23030 / V23031 series), Small General Purpose
Relay (V23006 series), Small Polarized Relay (V23063 ... V23067
and V23163 ... V23167 series). Accessories like sockets, hold down
springs, etc. optional.
30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /
160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.
14 x 9 mm board space and 5 mm height.
MT2 / MT4
2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and
signal relay with bifurcated contacts. Nominal voltage range from 4.5 ...
48 V, coil power consumption 150/200/300/400 and
550 mW, and 300 mW (MT4). Dielectric strength fulfills the
requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both
and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)
the MT4 only.
HF3 Relay
High performance low cost RF relay with excellent RF characteristics.
Available with an impedance of 50 and 75 Ohm. Suitable for frequen-
cies up to 3 GHz. Actually smallest RF relay available combining small
size, excellent RF performance and SMD solderability. Available as non
latching or latching relay with 1 or 2 coils and a nominal coil voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.
Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,
MT4 approx. 20 x15 mm board space and 11 mm height.
Page 10 (11)
108-98001 Rev. D
Tyco Electronics AXICOM Ltd.
Seestrasse 295 - P.O. Box 220
CH-8804 Au-Wädenswil / Switzerland
Phone +41 1 782 9111
Fax +41 1 782 9080
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752
Page 11 (11)
108-98001 Rev. D
相关型号:
©2020 ICPDF网 联系我们和版权申明