JDS9-1Y [TE]
AC solid state relay for loads up to 1A @ 250Vrms (2A with heatsink); 交流固态继电器的负载高达1A @ 250Vrms （ 2A带散热片）
| 型号： | JDS9-1Y |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | AC solid state relay for loads up to 1A @ 250Vrms (2A with heatsink) |
| 文件： | 总2页 (文件大小：125K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DS9 Series High Performance Solid State Relays
AC solid state relay for loads up to 1A @ 250Vrms (2A with heatsink)
Product Facts
ꢀ Qualified to Mil-R-28750C
(Mil p/n M28750/9-001Y).
ꢀ Optically coupled all solid
state relay.
ꢀ TTL compatible input.
ꢀ Zero voltage turn-on for low
EMI.
ꢀ Hermetically sealed low
profile metal DIP package.
This PC board mountable
solid state relay is designed
for low power AC load
switching up to 1 amp at
250Vrms (2 amps with
heatsink). The circuit
voltage turn-on for reliable
switching of resistive or
reactive loads. TTL
compatible input circuitry is
optically isolated to
1,500Vrms from the AC
load circuit. The relay is
offered in two versions: the
MIL qualified JDS9-1Y with
“Y” level screening per Mil-
R-28750C and the DS9-1W
tested per Tyco Electronics
specifications for CII relays,
equivalent to former “W”
level screening.
employs back-to-back
photo SCRs with zero
CII Part Number
JDS9-1Y
Military Part Number
M28750/9-001Y
N/A
Screening Level
Y
DS9-1W
W
Circuit Diagram
Outline Drawing
Terminal View
INPUT (+)
OUTPUT
6
.890 MAX.
(22.61)
1
.530 MAX.
(13.46)
14
8
.190 MAX.
(4.83)
INPUT (-)
OUTPUT
.830 MAX.
(21.08)
.020 MAX.
(.51)
TERMINAL NUMBERS SHOWN
ABOVE ARE FOR REFERENCE ONLY
.270 .020
(.6.86 .51)
.018 .002 DIA.
(.46 .05)
.135 REF.
(3.43)
.105 REF.
(2.67)
.500
CASE
(12.70)
TEMPERATURE
MEASUREMENT
POINT
1
6
.300
(7.62)
14
8
TOLERANCE: .010 (.25)
UNLESS OTHERWISE NOTED
.600
(15.24)
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
CII and TYCO are trademarks.
1
Catalog DS9-TBD
Issued 1-04
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
DS9 Series High Performance Solid State Relays
AC solid state relay for loads up to 1A @ 250Vrms (2A with heatsink) (Continued)
Environmental Characteristics
Electrical Specifications (-55°C to +105°C unless otherwise specified)
Ambient Temperature Range:
Operating: -55°C to +110°C.
Storage: -55°C to +125°C.
Input
Input supply voltage range (Vcc)
Input current (max.) @ 5Vdc
Must turn-on voltage
3.8 - 32 Vdc
15mAdc
3.8Vdc
Vibration Resistance:
20 G’s, 10-2,000 Hz.
Must turn-off voltage
1.5Vdc
Shock Resistance:
1,500 G’s, 0.5 ms pulse.
Reverse voltage protection
-32Vdc
Acceleration Resistance (Y axis):
5,000 G’s.
I/O
Dielectric strength (min.)
1,500V rms/60 Hz.
9
Insulation resistance (min.) @ 500VDC
Capacitance (max.)
10 ohms
10pF
Output
Output current rating (max.)
Surge current, 16ms @ 25°C (max.)
Continuous load voltage (max.)
Transient blocking voltage (max.)
Frequency range
2A rms (Fig. 2, Note 1)
8A pk (Fig. 1, Note 3)
250V rms
500V pk
Mechanical Characteristics
Weight (typical):
.176 oz. (5 grams)
Materials:
Header: Kovar
Pins: Kovar, gold plated
Cover: Nickel.
40 - 440 Hz.
1.5V rms
Output voltage drop (max.) @ 1A load current
Off-state leakage current (max.) @ 250V rms/400 Hz.
Turn-on time (max.)
1mA rms
1/2 cycle
Turn-off time (max.)
1 cycle
Off-state dv/dt (min.), with snubber
Zero voltage turn-on window, initial (max.)
Waveform distortion (max.)
Output chip junction temperature (max.)
Thermal resistance (max.), junction to ambient
Thermal resistance (max.), junction to case
200V /µs (Note 2)
10V
4V rms
130°C
65°C/W
15°C/W
Notes
1. Operation at elevated load currents up to 2 amps is dependent on use of suitable heatsink to maintain case temperature per Fig. 2.
2. Recommended output snubber: R = 100 ohms (1/2 W), C = .01µF (600V).
3. Heating of output chip during and after a surge may cause loss of output blocking capability until junction temperature falls below maximum rating.
Figure 1 - Peak Surge Current vs. Surge Current Duration
Figure 2 - Load Current vs. Temperature
10
8
Case Temperature
2
@ 5 Vdc Input
@ 32 Vdc Input
6
Ambient Temperature
1
(W
4
/O
H
eat S
W/ Heat Sink
in
k)
@ 5 Vdc Input
@ 32 Vdc Input
2
W/O Heat Sink
0
0
10
100
1000
10,000
-55 0 10 30 50 70 90 110 130
Surge Current Duration (mSec)
Temperature (°C)
DS9-TBD–PDF–KRG–1-04
www.tycoelectronics.com
2
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
相关型号：
JDUFCMEN-77.76MHZ
PECL Output Clock Oscillator, 77.76MHz Nom, HERMETICALLY SEALED, CERAMIC, SO-6
MICROSEMI
JDUFCMEN-FREQ
VCXO, CLOCK, 15 MHz - 180 MHz, PECL OUTPUT, HERMETICALLY SEALED, CERAMIC, SO-6
MICROSEMI
JDUFCMEN15
PECL Output Clock Oscillator, 15MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, J-LEADE, CERAMIC, SOJ-6
MICROSEMI
JDUFCMEN155.52
PECL Output Clock Oscillator, 155.52MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, J-LEADE, CERAMIC, SOJ-6
MICROSEMI
©2020 ICPDF网 联系我们和版权申明