K-200B3C [TE]

DC Electrically Held Units; DC电挂起的单位
K-200B3C
型号: K-200B3C
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

DC Electrically Held Units
DC电挂起的单位

文件: 总2页 (文件大小:101K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HARTMAN Aerospace Power Products  
Features  
Physical  
Environmentally sealed  
Repairable  
KSe rie s Conta ctors  
DC Electrically Held Units  
For factory-direct application assistance, contact the HARTMAN  
product team at (419) 521-9500, Fax (419) 526-2749.  
0.50 lbs. - 0.75 lbs.  
Environmental  
• Temperature range -55° to +85°C  
25G shock  
K Series contactors are among the smallest, lightest 200-400amp contactors  
currently available in the aerospace industry. They are designed for use in DC  
power distribution systems for private, military and commercial aircraft; or  
ground vehicle applications.  
10G vibration  
Power switching  
• S.P.S.T. normally open  
28 Volts  
200-400A make/ carry/ break  
1000-2000A inrush  
2000-4000A maximum interrupt  
Built to meet  
or exceed the  
requirements  
of Mil-R-6106  
Auxiliary switching**  
• Up to 2 Form Z  
• Up to 2 Form C  
Buss Bar Mount Version  
Chassis Mount Version  
Part No.*  
K-200A3C  
K-200B3C  
K-300A5C  
K-300B5C  
K-400A5C  
K-400B5C  
Voltage  
28Vdc  
28Vdc  
28Vdc  
28Vdc  
28Vdc  
28Vdc  
Current Rating  
Mounting  
Chassis  
Buss Bar  
Chassis  
Buss Bar  
Chassis  
Buss Bar  
200 Amps  
200 Amps  
300 Amps  
300 Amps  
400 Amps  
400 Amps  
• 5 ampere 28 Vdc or 115 Vac  
Coil voltage and power  
28V/ 9.1W nominal  
• Self economizing  
** Other auxiliary arrangements or no auxiliary contacts  
available  
* Each have 2 Form Z auxiliary contacts and coil suppression  
Typical Contactor Dimensions  
Buss Bar Mount Version  
Chassis Mount Version  
Note : Dimensions shown are for K-300 Series contactors. K-200 Series contactors are slightly smaller in size; K-400 Series contactors are slightly larger in size.  
Catalog (web doc only)  
Revised 5-04  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
www.tycoelectronics.com  
UK: 44-141-810-8967  
HARTMAN Aerospace Power Products  
Ge ne ra lOpe ra tingSpe cifica tions  
Physical Data  
Typical Schematic Diagram  
Main contact arrangement  
Form  
Auxiliary contact arrangement  
Weight  
SPST-NO  
X
Up to 2 Form Z or C  
0.50 lbs - 0.75 lbs  
Environmental Data  
25 Gpeak  
10 Grms  
5 Grms  
Shock, 11ms 1/ 2 sine (operating)  
Vibration, sine 10-2000 Hz  
Vibration, random 10-2000 Hz  
Operating temperature range  
Storage temperature range  
-55 to +85°C  
-55 to +125°C  
Main Contacts Electrical Data  
32 Vdc maximum  
Bi-directional  
200 Amps/ 300 Amps/ 400 Amps  
1000 Amps/ 1500 Amps/ 2000 Amps  
2000 Amps/ 3000 Amps/ 4000 Amps  
Rated operating voltage  
Load polarity (make, carry, break)  
Continuous current carry  
In-rush current  
Maximum interrupt (50 times)  
Electrical current switching life @ 28Vdc  
Resistive load (make, carry, break)  
Motor load (make, carry, break)  
Inductive load (make, carry, break)  
Maximum contact voltage drop @ rated amps (see note 2)  
Insulation resistance @ 500 Vdc  
Dielectric withstanding voltage @ sea level  
(leakage less than 1.0 mA, 1 minute continuous)  
50K cycles minimum  
50K cycles minimum  
50K cycles minimum  
Notes  
1. Auxiliary contacts are gold plated. 1 mA  
rating does not apply if contacts have  
switched loads above 1 mA.  
0.125 Vdc  
100 Milliohms  
1800 Vrms  
2. 150 mV After Life test.  
Auxiliary Contacts Electrical Data  
3. Dropout is 3.5 Vdc max when used as a  
start contactor with the coil center tap  
utilized.  
28 Vdc/ 115 Vac  
Bi-directional  
5 Amps  
Rated operating voltage  
Load polarity (make, carry, break)  
Continuous current carry  
Low level (see note 1)  
1 mA  
Mechanical Data  
35 Ms maximum  
20 Ms maximum  
4 Ms maximum  
100K cycles  
Operate time @ 18-32 Vdc  
Dropout time @ 18-32 Vdc  
Bounce @ 18-32 Vdc  
Mechanical life @ 25% rated resistive load  
Coil Data  
Continuous  
32 Vdc  
28 Vdc  
16 Vdc  
9 Vdc  
Duty cycle  
Maximum operate voltage  
Nominal operate voltage  
Maximum pickup voltage  
Maximum dropout voltage (see note 3)  
Coil current @ 32 Vdc and -55°C  
Inrush (12 mS max)  
Holding  
5.5 Amps maximum  
0.400 Amps maximum  
For factory-direct application assistance, contact the HARTMAN  
product team at (419) 521-9500, Fax (419) 526-2749.  
Nominal coil resistance @ 22°C  
Pickup  
Holding  
5.5 ohms  
86.5 ohms  
9.1 watts  
42 Vdc maximum  
Nominal coil power  
Coil transient suppression  
© 2004 by Tyco Electronics Corporation. All Rights Reserved.  
HARTMAN and TYCO are trademarks.  
Catalog (web doc only)  
Revised 5-04  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
reference purposes only.  
Specifications subject  
to change.  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
UK: 44-141-810-8967  
www.tycoelectronics.com  

相关型号:

K-220

Coils and Chokes for general use
PREMO

K-221

Coils and Chokes for general use
PREMO

K-222

Coils and Chokes for general use
PREMO

K-223

Coils and Chokes for general use
PREMO

K-224

Coils and Chokes for general use
PREMO

K-229064-10-1A

Label format - Old format order code cross reference
TE

K-254095-10-1A

Label format - Old format order code cross reference
TE

K-254127-10-1A

Label format - Old format order code cross reference
TE

K-2738-M06

RF Connector Adapter
WINCHESTER

K-293064-10-1A

Label format - Old format order code cross reference
TE
WINCHESTER

K-2963-13

CLIP ASSEMBLY
WINCHESTER