LCS-01 [TE]
HORIZONTAL COMPACT SHORT-SWING LIQUID LEVEL SENSORS;型号: | LCS-01 |
厂家: | TE CONNECTIVITY |
描述: | HORIZONTAL COMPACT SHORT-SWING LIQUID LEVEL SENSORS |
文件: | 总4页 (文件大小:253K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
te.com
HORIZONTAL COMPACT
SHORT-SWING
LIQUID LEVEL SENSORS
LCS Series
High or low level switching
N.O./N.C. SPST output
Mounted on the side wall of a tank
Certified reed switch (UL component listed)
Body material is acetal and float is polypropylene
The LCS series of point liquid level switch demonstrates a high degree of
reliability due to the use of non-reactive wetted components and a unique
reed switch designed specifically for level sensing applications. The
sensor utilizes a moving float with an embedded magnet to activate a
reed switch located in the sensor body. As the liquid level raises the float,
it moves a magnet into close proximity of the reed switch and actuates it
to give an open contact or closed contact switch indication.
Features
Voltage rating up to 250VAC
Current rating up to 1.0 amp
Compact design and low profile
Cable or integrated connector
Rapid Push Fit Installation
EPDM Sealing Grommet
The reliability of this sensor results from a very simple operating principle,
a single moving part, media compatible wetted materials, and a unique
reed switch design that has a UL recognized component certification.
The sensor quickly mounts into the side wall of a liquid storage tank using
a unique push fit design. This is an external configuration. The output is a
simple N.O. or N.C. SPST reed switch that utilizes Ruthenium contact
points for reliability. Changing from a N.O. output to a N.C. output is done
by rotating the switch 180° in the mounting hole. This change can be
done in the field. Electrical outputs are a single pair of wires with PVC
insulation and a length of 0.5m, or one of three optional integrated
connector designs.
Applications
Water storage tanks
Full and/or empty detection
Pump on/off controls
Marine bilge and ballast tanks
Flood detection and prevention
Coolant level indication
Livestock watering tanks
Irrigation systems
Water treatment plants
›
CLICK HERE
CONNECT WITH A SPECIALIST
Page 1
TE CONNECTIVITY SENSORS /// LCS SERIES
10/2020
LIQUID LEVEL SWITCH
LCS Series
Absolute Maximum Ratings(1)
Parameter
Min
Max
Units
Notes/Conditions
DC contact voltage
DC contact current
RMS contact voltage
RMS contact current
DC contact voltage
DC contact current
200
1.0
250
1.0
48
V
A
For LCS-01 only
Do not exceed 40W
V
A
V
For LCS-02, -03, -04 only
Do not exceed 40W
1.0
60
A
Storage and operating
temperature
-30
°C
Bar
Fitting pressure
-1.0
0.34
Internal tank pressure
(1)Maximum limits the device will withstand without damage
Product Specifications
Parameter
Details & Options
Mounting Orientation
Fitting
Side entry
External push fit grommet
Switch Operation
Contact Forms
N.C. when float is horizontal
Form A (SPST)
Contact Material
Contact resistance (max)
Housing Material
Float Material
Ruthenium
140 mΩ
Acetal/polypropylene
Foamed polypropylene
Cable Description
22 AWG 16/0.2mm PVC insulated, UL/CSA/BS6361 (model LCS-01)
TE Connectivity Econoseal 3 P/N 344274
Mating connector – TE Connectivity P/N 344276-1
Delphi Packard 150 Series
LCS-02
LCS-03
Integrated Connector
Design Equivalent to:
Mating connector – Delphi Packard P/N 15336024
LCS-04 Yazaki 090 W/P 2P male
±50g 11ms half sign duration
±35g 0 – 500Hz
Shock
Vibration
Ambient Humidity
Ingress Protection
Approvals & Certifications
0 – 95% RH (non-condensing)
IP68 (wetted surfaces) IP65 (non-wetted surfaces)
UL file E98428
TE CONNECTIVITY SENSORS /// LCS SERIES
10/2020
LIQUID LEVEL SWITCH
LCS Series
Outline Dimensions and Connection Options
LCS-01
LCS-02
LCS-03
LCS-04
TE CONNECTIVITY SENSORS /// LCS SERIES
10/2020
LIQUID LEVEL SWITCH
LCS Series
Ordering Information
Model Number
LCS - __ __
Switch
SPST Max 100VDC, 250VRMS, 1A, 40W
-01
Connection 0.5m PVC insulated wire pair
Mating
Not required
connector
Switch
SPST Max 48VDC, 1A, 40W
-02
-03
-04
Connection Integral TE Ecoseal connector
Mating
TE Connectivity P/N 344276-1
connector
Switch
SPST Max 48VDC, 1A, 40W
Delphi Packard 150 Series
Delphi Packard P/N 15336024
Connection
Mating
connector
Switch
SPST Max 48VDC, 1A, 40W
Connection Yazaki 090 W/P 2P male
Mating
Yazaki 090 W/P 2P female
connector
›
CLICK HERE
CONNECT WITH A SPECIALIST
NORTH AMERICA
Tel +1 800 522 6752
EUROPE
Tel +31 73 624 6999
ASIA
Tel +86 0400 820 6015
te.com/sensors
TE Connectivity, TE, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might
be trademarks of their respective owners
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However,
TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only
be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect
or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to
determine the suitability of each such product for the specific application.
© 2020 TE Connectivity Corporation. All Rights Reserved.
10//2020
TE CONNECTIVITY SENSORS /// LCS SERIES
10/2020
相关型号:
©2020 ICPDF网 联系我们和版权申明