M32JL-01003E-05KPG中文资料_数据手册_规格书

M3200

Pressure Transducer

SPECIFICATIONS

•

Analog Outputs (V/mA)

14-Bit Digital Output for Pressure and 11-Bit for

Temperature

•

CE Compliance

Weatherproof

0.5% zero offset,1.5 % accuracy (Total error band)

The M3200 pressure transducer from the Microfused line of TE is

suitable for measurement of liquid or gas pressure, even for

difficult media such as contaminated water, steam, and mildly

corrosive fluids.

FEATURES

The transducer pressure cavity is machined from a solid piece of

17-4PH stainless steel. The standard version includes a 1/4 NPT

pipe thread allowing a leak-proof, all metal sealed system. With

excellent durability, there are no welds or organics exposed to the

pressure media.

•

One Piece Stainless Steel Construction

Digital Pressure and Temperature Output

or Analog mV/Amplified Output

Compact

17-4PH Stainless Steel

Customizable

•

TE’s proprietary Microfused technology, derived from demanding

aerospace applications, employs micromachined silicon

piezoresistive strain gages fused with high temperature glass to a

stainless-steel diaphragm. This approach achieves media

compatibility simply and elegantly while providing an exceptionally

stable sensor without the PN junctions of conventional

micromachined sensors.

APPLICATIONS

•

Pumps and Compressors

Hydraulic/Pneumatic Systems

Automotive Test Systems

Energy and Water Management

Medical Gas Pressure

Leak Detection

Remote Measuring Systems

General Pressure Measurements

This product is geared towards industrial and commercial OEMs

for small to high volume applications. Standard configurations are

suitable for many applications. Please contact factory for your

customization needs.

02/2021

SENSOR SOLUTIONS ///M3200

Page 1

M3200

Pressure Transducer

STANDARD RANGES

Range (psi)

0 to 100

0 to 250

0 to 500

0 to 01k

0 to 2k5

0 to 05k

0 to 7k5

0 to 10k

Range (bar)

0 to 007

0 to 017

0 to 035

0 to 070

0 to 170

0 to 350

0 to 500

0 to 700

Gage/Compound

•

PERFORMANCE SPECIFICATIONS (ANALOG)

Unless otherwise specified: All parameters measured at 25°C

PARAMETERS

MIN

TYP

MAX

0.25

0.5

UNITS

NOTES

Accuracy

-0.25

% F.S BFSL

(Combined linearity, hysteresis & repeatability)

Zero offset

Pressure Cycles

-0.5

1.0E+6

2X

%F.S.

0~F.S. Cycles

Rated

MΩ

@ 25°C

Proof Pressure

Burst Pressure

5X

≤20kpsi

Isolation, Body to Any Lead

Load Resistance (R_L)

Load Resistance

50

@ 250V_DC

>100

<(Supply Voltage-9V)/0.02A

kΩ

Voltage Output

Current Output

Voltage Output

@500 V_AC1 min

Ω

Current Consumption

Dielectric Strength

Long Term Stability (1 year)

Total Error Band

5

2

mA

-0.25

0.25

1.5

85

%Span

%F.S.

°C

-1.5

-20

Over comp. temp

Compensated Temperature

Except Cable

105°C max

Operating Temperature

Storage Temperature

-40

125

°C

Except Cable

105°C max

Weather proof Rating

Rise Time (10% - 90%)

Wetted Material

Shock

IP67 for cable & M12 type, IP66 for Packard type, IP65 for Form C type

<2 ms (mV Output); <3ms (mA Output)

Note 1

17-4PH Stainless Steel

50g, 11 msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A

±20g, MIL-STD-810C, Procedure 514.2-2, Curve L

Vibration

Compliances⁶

EN 55022 Emissions Class A & B

IEC 61000-4-2 Electrostatic discharge immunity (4kv contact / 8kv air discharge)

IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic field immunity (10 V/m; 80M-1GHz; 3 V/m, 1.4 – 2.0GHz; 1 V/m, 2.0 – 2.7GHz)

IEC 61000-4-4 Electrical Fast Transient/Burst Immunity (±1kV)

IEC 61000-4-5 Surge (line to line: ±1.0kV/42Ω; Line to case: ±1.0kV/42Ω)

IEC 61000-4-6 Immunity to conducted disturbances, induced by radio-frequency fields (150k-80MHz, 3V_RMSfor current output model,

10V_RMSfor voltage model)

02/2021

SENSOR SOLUTIONS ///M3200

Page 2

M3200

Pressure Transducer

PERFORMANCE SPECIFICATIONS (DIGITAL)

Unless otherwise specified: All parameters measured at 25°C & 3.3vDC

PARAMETERS

Output at Zero Pressure

Output at FS Pressure

Current Consumption

Current Consumption (sleep mode)

Supply Voltage

MIN

TYP

MAX

1250

15250

3.5

UNITS

Count

mA

NOTES

750

1000

14720

15000

5

µA

2.7

2X

5.0

V

Proof Pressure

Rated

No More than

20kpsi

Burst Pressure

5X

Rated

Isolation, Body to Any Lead

Pressure Cycles

50

MΩ

@ 250V_DC

1.00E+6

0~F.S. Cycles

Pressure Accuracy (RSS combined

Non-Linearity, Hysteresis &

Repeatability)

-0.25

0.25

%F.S. BFSL

@ 25°C

Note 2

Temperature Accuracy

Long Term Stability (1 year)

Total Error Band

-3

-0.25

-1.5

0

3

°C

%F.S.

°C

0.25

1.5

Over comp Temp.

For reference

Compensated Temperature

Compensated Temperature Output

Operating Temperature

55

512

-20

-40

1075

+85

Count

°C

Storage Temperature

°C

Non-sleep mode,

note 3

Response time

3

ms @ 4MHz

Response time

Wetted Material (except elastomer seal)

Shock

8.4

Sleep mode, note 3

17-4PH Stainless Steel

50g, 11 msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A

Weather proof Rating³

IP67

Vibration

±20g, MIL-STD-810C, Procedure 514.2-2, Curve L

Compliance⁶

EN 55011 Emissions Class A & B

IEC 61000-4-2 Electrostatic Discharge Immunity (4kV contact/8kV air discharge)

IEC 61000-4-3 Radiated Radio-Frequency Electromagnetic Field Immunity (1V/m, 80M-1GHz; 3 V/m, 1.4 – 2.0GHz; 1V/m,

2.0-2.7GHz)

IEC 61000-4-4 Electrical Fast Transient/Burst Immunity (±1kV)

IEC 61000-4-6 immunity to conducted disturbances, induced by radio-frequency fields (150k-80MHz, 3V_RMS

)

Notes

1. Weather-proof ratings are met when the mating connectors are properly installed and cable termination to dry and clean area.

For Cable option, IP67 is guaranteed under room temperature.

2. Reflect pressure port diaphragm temperature over the compensated temperature range.

3. Response time is from power on to reading measurement data.

4. For all CE compliance test, max allowed output deviation is ±1.5%F.S.

5. All Configurations are built with Voltage Reverse and output Short-Circuit Protections.

6. For communication and interfacing, refer to document ‘Interfacing to MEAS Digital Pressure Modules’ online

02/2021

SENSOR SOLUTIONS ///M3200

Page 3

M3200

Pressure Transducer

DIMENSIONS

Digital Output I²C Wiring

Connection +Supply

-Supply

BLACK

3

SDA

SCL

Cable

M12

RED

1

GREEN WHITE

4

2

Current Output Wiring

Connection

+Supply

-Supply

NC. Pins

P_REFVent

Packard A

A

B

C

Hole through

connector

Packard B

B

1

A

2

C

Hole through

connector

Form C

3, 4

Thread through

connector

Cable

M12

Red

1

Black

3

-

In Cable

2,4

Hole through

connector

Voltage Output Wiring

Connection

+Supply

-Supply

+Output

-Output

NC.

P_REFVent

Pins*

Packard A

Packard B

Form C

Cable

A

B

A

C

-

Hole through Connector

Thread through Connector

In Cable

C

3

-

1

2

-

4

-

Red

1

Black

3

White

2

Not connected

M12

4

Hole through Connector

02/2021

SENSOR SOLUTIONS ///M3200

Page 4

M3200

Pressure Transducer

Notes:

*NC. Pins are reserved for factory use only. DO NOT CONNECT.

**For cable connections, drain wire is internally terminated to pressure port.

drain wire is not available for I2C output option

*** Cable material：4C*22AWG + DRAIN + AL.MYLAR + PVC Jacket

Transmitter of gage pressure type requires vent to atmosphere on the pressure reference side.

➢

Accomplished via cable from transmitter or through customer mating connector/cable assembly which has internal vent path

(end of cable should be terminated to clean & dry area)

Weather-proof Ratings are met when Mating Connectors are installed properly, and cable termination is to dry and clean area.

PRESSURE PORTS

Code

Pressure Port

Dim C

Recommended Torque [Nm]

7/16-20 UNF Male SAE J1926-2 Straight Thread

O-Ring BUNA-N 90SH ID8.92xW1.83mm

4

0.45 [11.43]

18-20

5

6

1/4-18 NPT

1/8-27 NPT

0.65 [16.51]

0.53 [13.46]

0.47 [11.94]

0.50 [12.70]

2-3 TFFT*

30-35

B

E

G1/4 JIS B2351 with NBR O-ring

1/4-19 BSPT

2-3 TFFT*

7/16-20 UNF Female SAE J513 Straight Thread

w/ Integral Valve Depressor

P

0.43 [10.92]

15-16

*Turn From Finger Tight

02/2021

SENSOR SOLUTIONS ///M3200

Page 5

M3200

Pressure Transducer

DIGITAL PRESSURE OUTPUT

% Output

Digital Counts (Decimal)

Digital Counts (Hex)

0x3E8

0%

1000

1700

5%

0X6A4

10%

2400

0X960

50%

8000

0X1F40

90%

13600

14300

15000

0X3520

95%

0X37DC

0X3A98

100%

02/2021

SENSOR SOLUTIONS ///M3200

Page 6

M3200

Pressure Transducer

DIGITAL TEMPERATURE OUTPUT

Output °C

Digital Counts (Decimal)

Digital counts

0x200

0

512

614

10

25

40

55

0x266

767

0x2FF

921

0x399

1075

0x433

02/2021

SENSOR SOLUTIONS ///M3200

Page 7

M3200

Pressure Transducer

OUTPUT (ANALOG)

Code

Output

0.5 – 4.5V

4 – 20mA

0 – 5 V

0 – 10 V

1 – 5 V

Supply

5 ± 0.25V

9 – 30V

8 – 30V

12 – 30 V

8 – 30 V

Ratiometricity

Red

Black

Common

-Supply

Green

Not connected

Not connected Not connected

Not connected

White

+Output

3

5

6

7

8

Yes

No

+Supply

+Output

OUTPUT (DIGITAL)

Code

J

Output

I²C

Supply

2.7 – 5.0V

Red

+Supply

Black

-Supply

Green

SDA

White

SCL

02/2021

SENSOR SOLUTIONS ///M3200

Page 8

M3200

Pressure Transducer

ORDERING INFORMATION

For Analog Output:

M32 3 4 – 00000 4 – 250P G

Pressure Type

Gage

Output

G

C

Code

Output

0.5-4.5V

4-20mA

0-5V

Compound

3

5

6

7

8

Compound pressure range is -14.7 to XXX psiG or -1 to XXX barG.

i.e. 200PC: -14.7 to 200psiG, 020BC: -1 to 20 barG

0-10V

1~5V

Pressure Range

psi

STD

100P

bar

STD

007B

Connection

4

6

Packard A Connector

Form C with Mating Connector

Packard B Connector

M12 Connector

Cable 0.5m

250P

500P

01KP

2K5P

05KP

7K5P

10KP

017B

035B

070B

170B

350B

500B

700B

9

D

L

M

N

P

Cable 1m

Cable 2m

Cable 5m

Pressure Ranges between 100-10000psi (7-700bar) are all available. Change

Pressure Number Accordingly

Snubber

Pressure Port

0

1

No snubber

Code Description

With snubber*

7/16-20 UNF Male SAE J1926-2 Straight Thread

O-ring 90SH ID8.92xW1.83mm

4

*Available for G1/4 port only, more snubber option, please consult with factory

5

6

1/4-18 NPT

1/8-27 NPT

For Digital Output, see “For Digital Output” Ordering Information

All Configurations are built with Voltage Reverse and Output Short-Circuit Protections.

B

E

G1/4 JIS B2351 with NBR O-ring

1/4-19 BSPT

7/16-20 UNF Female SAE J513 Straight Thread

with Integral Valve Depressor

P

Click here for Torque Recommendation

02/2021

SENSOR SOLUTIONS ///M3200

Page 9

M3200

Pressure Transducer

For Digital Output:

M32 J L – 000 0 0 4 – 250P G

Output

Pressure Type

Gage

Code

J

Output

I²C

G

C

Compound

Compound pressure range is -14.7 to XXX psiG or -1 to XXX barG.

Ex. 200PC: -14.7 to 200psiG, 020BC: -1 to 20 barG

Connection

Cable 0.5m

Cable 1m

L

M

D

Pressure Range

M12 connector

psi

STD

100P

bar

STD

007B

Snubber

250P

500P

01KP

2K5P

05KP

7K5P

10KP

017B

035B

070B

170B

350B

500B

700B

0

No snubber

With snubber*

1

*Available for G1/4 port only,More snubber options, please consult with factory.

Sleep Mode (Digital ONLY)

0

1

Non-Sleep Mode

Sleep Mode

Pressure Ranges between 100-10000psi (7-700bar) are all

available. Change Pressure Number Accordingly

Pressure Port

Code Description

Digital Address (Digital ONLY)

7/16-20 UNF Male SAE J1926-2 Straight Thread

O-ring BUNA-N 90SH ID8.92xW1.83mm

1/4-18 NPT

0

1

2

3

4

0X28H

0X36H

0X46H

0X48H

0X51H

4

5

6

1/8-27 NPT

B

E

G1/4 JIS B2351 with NBR O-ring

1/4-19 BSPT

7/16-20 UNF Female SAE J513 Straight Thread

with Integral Valve Depressor

P

Click here for Torque Recommendation

All Configurations are built with Voltage Reverse and Output Short-Circuit Protections.

ASIA

EUROPE

NORTH AMERICA

Measurement Specialties (China), Ltd.,

a TE Connectivity Company

Phone: +86 0400-820-6015

Measurement Specialties (Europe), Ltd.,

a TE Connectivity Company

Phone: +31 73 624 6999

Measurement Specialties, Inc.,

a TE Connectivity Company

Phone: +1 800-522-6752

Email: customercare.shzn@te.com

Email: customercare.lcsb@te.com

Email: customercare.frmt@te.com

TE.com/sensorsolutions

Measurement Specialties, Inc., a TE Connectivity company.

Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein

might be trademarks of their respective owners.

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes

no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard

Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse

of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.

02/2021

SENSOR SOLUTIONS ///M3200

Page 10

M3200

Pressure Transducer

INTERFACING TO TE

DIGITAL PRESSURE

MODULES

The TE series of digital pressure sensors uses the latest CMOS sensor

conditioning circuitry (SSC) to create a low cost, high performance digital output

pressure (14-bit) and temperature (11-bit) sensor designed to meet the strictest

requirements from OEM customers.

The MS45x5DO, 85BSD, 85FBSD, 86BSD,154BSD, MSP100(DO) and

MSP300(DO) are the latest offering from TE to offer digital communication to

pressure sensor OEMs.

I²C AND SPI INTERFACE SPECIFICATIONS

1. I²C Interface Specification

The I²C interface is a simple 8-bit protocol using a serial data line (SDA) and a serial clock line (SCL) where each device connected to the

bus is software addressable by a unique address. For detailed specifications of the I²C protocol, see The I²C Bus Specification, Version 2.1,

January 2000.

1.1 Interface Connection-External

Bi-directional bus lines are implemented by the devices (master and slave) using open-drain output stages and a pull-up resistor connected

to the positive supply voltage. The recommended pull-up resistor value depends on the system setup (capacitance of the circuit or cable and

bus clock frequency). In most cases, 4.7kΩ is a reasonable choice. The capacitive loads on SDA and SCL line have to be the same. It is

important to avoid asymmetric capacitive loads.

02/2021

SENSOR SOLUTIONS ///M3200

Page 11

M3200

Pressure Transducer

1.2 I²C Address

The I²C address consists of a 7-digit binary value. The factory setting for the I²C slave address is 0x28, 0x36 or 0x46 depending on the

interface type selected from the ordering information. The address is always followed by a write bit (0) or read bit (1). The default

hexadecimal I²C header for read access to the sensor is therefore 0x51, 0x6D, 0x8D respectively, based on the ordering information.

1.3 INT/SS Pin

When programmed as an I²C device, the INT/SS pin operates as an interrupt. The INT/SS pin rises when new output data is ready and falls

when the next I²C communication occurs.

1.4 Transfer Sequences

Transmission START Condition (S): The START condition is a unique situation on the bus created by the master, indicating to the slaves

the beginning of a transmission sequence (the bus is considered busy after a START).

I²C Transmission Start Condition

SDA

SCL

START condition

A HIGH to LOW transition on the SDA line while SCL is HIGH

Transmission STOP Condition (P): The STOP condition is a unique situation on the bus created by the master, indicating to the slaves the

end of a transmission sequence (the bus is considered free after a STOP).

I²C Transmission Stop Condition

SDA

SCL

STOP condition

A LOW to HIGH transition on the SDA line while SCL is HIGH

Acknowledge (ACK) / Not Acknowledge (NACK): Each byte (8 bits) transmitted over the I²C bus is followed by an acknowledge condition

from the receiver. This means that after the master pulls SCL low to complete the transmission of the 8th bit, SDA will be pulled low by the

receiver during the 9th bit time. If after transmission of the 8th bit the receiver does not pull the SDA line low, this is considered to be a NACK

condition.

02/2021

SENSOR SOLUTIONS ///M3200

Page 12

M3200

Pressure Transducer

If an ACK is missing during a slave to master transmission, the slave aborts the transmission and goes into idle mode.

I²C ACKNOWLEDGE / NOT ACKNOWLEDGE

Each byte is followed by an acknowledge or a not

acknowledge, generated by the receiver

1.5 Data Transfer Format

Data is transferred in byte packets in the I²C protocol, which means in 8-bit frames. Each byte is followed by an acknowledge bit. Data is

transferred with the most significant bit (MSB) first.

A data transfer sequence is initiated by the master generating the Start condition (S) and sending a header byte. The I²C header consists of

the 7-bit I²C device address and the data direction bit (R/_W).

The value of the R/_W bit in the header determines the data direction for the rest of the data transfer sequence. If R/_W = 0 (WRITE), the

direction remains master-to-slave, while if R/_W = 1 (READ), the direction changes to slave-to-master after the header byte.

1.6 Command Set and Data Transfer Sequences

The I²C master command starts with the 7-bit slave address with the 8th bit = 1 (READ). The sensor acts as the slave and sends an

acknowledge (ACK) indicating success. The sensor has four I²C read commands: Read_MR, Read_DF2, Read_DF3, and Read_DF4.Figure

1.6 shows the structure of the measurement packet of the four I²C read commands, which are explained in sections 1.6.1.

02/2021

SENSOR SOLUTIONS ///M3200

Page 13

M3200

Pressure Transducer

1.6.1

Figure 1.6 – I²C Measurement Packet ReadsI²C Read_DF (Data Fetch)

For Data Fetch commands, the number of data bytes returned by the sensor, is determined when the master sends the NACK and stop

condition. For the Read_DF3 data fetch command (Data Fetch 3 Bytes; see example 3 in Figure 1.6), the sensor returns three bytes in

response to the master sending the slave address and the READ bit (1): two bytes of bridge data with the two status bits as the MSBs and

then 1 byte of temperature data (8-bit accuracy). After receiving the required number of data bytes, the master sends the NACK and stop

condition to terminate the read operation. For the Read_DF4 command, the master delays sending the NACK and continues reading an

additional final byte to acquire the full corrected 11-bit temperature measurement. In this case, the last 5 bits of the final byte of the packet

are undetermined and should be masked off in the application. The Read_DF2 command is used if corrected temperature is not required.

The master terminates the READ operation after the two bytes of bridge data (see example 2 in Figure 1.6).

The two status bits (Bit 15 and Bit 14) give an indication of stale or valid data depending on their value. A returned value of 00 indicate

“normal operation and a good data packet” while a returned value of 10 indicates “stale data that has been already fetched”. See section 1.7

for additional details. Users that use “status bit” polling should select a frequency slower than 20% more than the update time.

02/2021

SENSOR SOLUTIONS ///M3200

Page 14

M3200

Pressure Transducer

1.7 Status Bits and Diagnostic Features

The table below summarizes the status bits conditions indicated by the 2 MSBs (Bit (15:14) of I²C data packet, S(1:0) of SPI data packet of

the bridge high byte data.

Table 1: Status Bits Encoding

Status Bits

(2 MSB of Output Data Packet)

Definition

Normal Operation. Good Data Packet

00

Reserved

01

10

11

Stale Data. Data has been fetched since last measurement cycle.

Fault Detected

The SSC is has on board diagnostic features to ensure robust system operation in the most “mission-critical” applications. A status bit value

of “11” indicates a fault condition in the SSC or sensing element. All diagnostics are detected in the next measurement cycle and reported in

the subsequent data fetch. Once a diagnostic is reported, the diagnostic status bits will not change unless both the cause of the diagnostic is

fixed and a power-on-reset is performed.

1.8 I²C Protocol Differences

There are three differences in the described above protocol compared with original I²C protocol:

◼

Sending a start-stop condition without any transitions on the SCL line (no clock pulses in between) creates a communication error for

the next communication, even if the next start condition is correct and the clock pulse is applied. An additional start condition must be

sent, which results in restoration of proper communication.

◼

The restart condition – a falling SDA edge during data transmission when the SCL clock line is still high – creates the same situation.

The next communication fails, and an additional start condition must be sent for correct communication.

A falling SDA edge is not allowed between the start condition and the first rising SCL edge. If using an I²C address with the first bit 0,

SDA must be held down from the start condition through the first bit.

2. SPI Interface Specification

SPI is a general-purpose synchronous serial interface. During an SPI transfer, transmit and receive data is simultaneously shifted out and in

serially. A serial clock line synchronizes the shifting and sampling of the information on two serial data lines.

SPI devices communicate using a master-slave relationship. Due to its lack of built-in device addressing, SPI requires more effort and more

hardware resources than I²C when more than one slave is involved. But SPI tends to be simpler and more efficient than I²C in point-to-point

(single master, single slave) applications for the very same reason; the lack of device addressing means less overhead.

The SPI interface is programmed for falling-edge MISO change.

02/2021

SENSOR SOLUTIONS ///M3200

Page 15

M3200

Pressure Transducer

2.1 SPI Read_DF (Data Fetch)

The SPI interface will have data change after the falling edge of SCLK. The master should sample MISO on the rise of SCLK. The entire

output packet is 4 bytes (32 bits). The high bridge data byte comes first, followed by the low bridge data byte. Then 11 bits of corrected

temperature (T[10:0]) are sent: first the T[10:3]byte and then the {T[2:0],xxxxx} byte. The last 5 bits of the final byte are undetermined and

should be masked off in the application. If the user only requires the corrected bridge value, the read can be terminated after the 2nd byte. If

the corrected temperature is also required but only at an 8-bit resolution, the read can be terminated after the 3rd byte is read.

Packet = [ {S(1:0),B(13:8)},{B(7:0)},{T(10:3)},{T(2:0),xxxxx}] Where

S(1:0) = Status bits of packet (normal, command, busy, diagnostic)

6 bits of 14-bit bridge data.

B(13:8) = Upper

B(7:0) = Lower 8 bits of 14-bit bridge data.

T(10:3) = Corrected temperature data (if application does not require corrected temperature, terminate read early)

Remaining bits of corrected temperature data for full 11-bit resolution

HiZ = High impedance

T(2:0),xxxxx =.

Figure 2.2 – SPI Output Packet with Falling Edge SPI_Polarity

TIMING DIAGRAMS

I²C INTERFACE PARAMETERS

PARAMETERS

SYMBOL

MIN

TYP

MAX

400

UNITS

SCLK CLOCK FREQUENCY

fSCL

tHDSTA

tLOW

100

0.1

0.6

0.1

0

KHz

uS

START CONDITION HOLD TIME RELATIVE TO SCL EDGE

MINIMUM SCL CLOCK LOW WIDTH ¹

MINIMUM SCL CLOCK HIGH WIDTH ¹

tHIGH

START CONDITION SETUP TIME RELATIVE TO SCL EDGE

DATA HOLD TIME ON SDA RELATIVE TO SCL EDGE

DATA SETUP TIME ON SDA RELATIVE TO SCL EDGE

STOP CONDITION SETUP TIME ON SCL

tSUSTA

tHDDAT

tSUDAT

tSUSTO

tBUS

0.1

2

BUS FREE TIME BETWEEN STOP AND START CONDITION

¹COMBINED LOW AND HIGH WIDTHS MUST EQUAL OR EXCEED MINIMUM SCL PERIOD.

02/2021

SENSOR SOLUTIONS ///M3200

Page 16

M3200

Pressure Transducer

I2C Timing Diagram

PARAMETERS

SYMBOL

f_SCL

MIN

50

2.5

0.6

0

TYP

MAX

800

UNITS

KHz

uS

SCLK CLOCK FREQUENCY

SS DROP TO FIRST CLOCK EDGE

MINIMUM SCL CLOCK LOW WIDTH ¹

MINIMUM SCL CLOCK HIGH WIDTH ¹

CLOCK EDGE TO DATA TRANSITION

tHDSS

t_LOW

uS

tHIGH

tCLKD

tSUSS

t_BUS

uS

0.1

uS

RISE OF SS RELATIVE TO LAST CLOCK EDGE

BUS FREE TIME BETWEEN RISE AND FALL OF SS

0.1

2

uS

¹COMBINED LOW AND HIGH WIDTHS MUST EQUAL OR EXCEED MINIMUM SCLK PERIOD.

02/2021

SENSOR SOLUTIONS ///M3200

Page 17

M3200

Pressure Transducer

NORTH AMERICA

EUROPE

ASIA

Measurement Specialties, Inc., a

TE Connectivity company 45738

Northport Loop West

Fremont, CA 94538

Tel: +1 800 767 1888

MEAS Switzerland Sarl, a

TE Connectivity company

Ch. Chapons-des-Prés 11 CH-

2022 Bevaix

Tel: +41 32 847 9550

Fax: +41 32 847 9569

customercare.bevx@te.com

Measurement Specialties (China) Ltd.,

a TE Connectivity company

No. 26 Langshan Road

Shenzhen High-Tech Park (North) Nanshan District,

Shenzhen, 518057

Fax: +1 510 498 1578

customercare.frmt@te.com

China

Tel: +86 755 3330 5088

Fax: +86 755 3330 5099

customercare.shzn@te.com

te.com/sensorsolutions

Measurement Specialties, Inc., a TE Connectivity company.

Measurement Specialties (MEAS), American Sensor Technologies (AST), TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos,

products and/or company names referred to herein might be trademarks of their respective owners.

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity

makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s

Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale,

use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.

02/2021

SENSOR SOLUTIONS ///M3200

Page 18

型号	制造商	描述	价格	文档
M32JL-01003E-100PC	TE	Pressure Transducer	获取价格
M32JL-01003E-100PG	TE	Pressure Transducer	获取价格
M32JL-01003E-10KPG	TE	Pressure Transducer	获取价格
M32JL-01003E-250PG	TE	Pressure Transducer	获取价格
M32JL-01003E-2K5PG	TE	Pressure Transducer	获取价格
M32JL-01003E-500PG	TE	Pressure Transducer	获取价格
M32JL-01003E-7K5PG	TE	Pressure Transducer	获取价格
M32JL-01003P-01KPG	TE	Pressure Transducer	获取价格
M32JL-01003P-05KPG	TE	Pressure Transducer	获取价格
M32JL-01003P-100PC	TE	Pressure Transducer	获取价格

M32JL-01003E-05KPG

M32JL-01003E-05KPG 概述

M32JL-01003E-05KPG 数据手册

M32JL-01003E-05KPG 相关器件

M32JL-01003E-05KPG 相关文章

热门型号