MA46H146 [TE]
GaAs Flip-Chip Multiplier Varactor Diode; 砷化镓倒装芯片乘数变容二极管型号: | MA46H146 |
厂家: | TE CONNECTIVITY |
描述: | GaAs Flip-Chip Multiplier Varactor Diode |
文件: | 总3页 (文件大小:114K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RoHs Compliant
GaAs Flip-Chip Multiplier Varactor Diode
MA46H146
V3
Absolute Maximum Ratings @ TA=+25 °C
Features
•
•
•
•
•
Very Low Total Capacitance < 0.06 pF
Extremely High Q > 15 K
Silicon Nitride Passivation
Polymer Scratch Protection
Surface Mount Configuration
Parameter
Operating Temperature
Storage Temperature
Reverse Voltage
Absolute Maximum
-65 °C to +150 °C
-65 °C to +150 °C
-26 V
Forward Current
50 mA
Description
Mounting Temperature
<200 °C
M/A-COM’s MA46H146 is a gallium arsenide flip
chip multiplier varactor These devices are facilitated
on MOVPE epitaxial wafers using a process de-
signed for high device uniformity and extremely low
parasitics. The MA46H146 diodes are fully pas-
sivated with silicon nitride and have an additional
polymide layer for scratch protection. The protective
coatings prevent damage to the junction during
automated or manual handling. The flip chip con-
figuration is suitable for pick and place insertion.
1. Operation of this device above any one of these parameters
may cause permanent damage
Chip Layout
Front View (Circuit Side)
Schematic
Back View (Operator Side)
Typical Performance Curves
Typical Capacitance vs. Reverse Bias Voltage
Typical Resistance vs. Reverse Bias Voltage
Specifications Subject to Change Without Notice.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHs Compliant
GaAs Flip-Chip Multiplier Varactor Diode
MA46H146
V3
Electrical Specifications @ TA = +25 °C
Gamma 0.50 Abrupt Multiplier Varactors
Breakdown Voltage @ 10 μA = 26V minimum
Reverse Current @ 18 V = 50 nA maximum
Gamma = 0.45-0.55, VR = 0 to 20 V
Total
Capacitance
Ratio
Total
Capacitance
Total
Capacitance
Total
Capacitance
Total
Capacitance
Q
Minimum
Vr=0V
F=1MHz
Vr=4V
F=1MHz
Vr=10V
F=1MHz
Vr=25V
F=1MHz
Vr=0V
Vr=25V
Vr=4V
f=50MHz
Part Number
(pF)
(pF)
(pF)
(pF)
-
-
Typical
Typical
Typical
Typical
Typical
Typical
MA46H146
0.063
0.040
0.032
0.030
2.1
15600
Applications
Handling Procedures
These GaAs Flip Chip devices are suited for milli-
meter wave frequency tunable filters, where ex-
tremely low parastics are required to maintain rea-
sonable Q. In addition, this product can be used in
multiplier circuits, for 2X and 3X output frequencies
in the millimeter wave frequency bands.
The following precautions should damaging GaAs
Flip-Chips:
Cleanliness
These chips should be handled in a clean environ-
ment. Do not attempt to clean die after installation.
Assembly Requirements using
Electrically Conductive Ag Epoxy
Static Voltage Sensitivity
These chips are designed to be inserted onto hard
or soft substrates with the junction side down. They
must be mounted with Electrically Conductive Ag
epoxy. Solders are not recommended due to Tung-
sten metallization beneath the gold contacts. The
die can also be assembled with the junction side
up, and wire or ribbon bonds made from the bond
pads to the circuit trace. Circuit can be preheated
to 125 – 150 °C. Use a controlled amount of con-
ductive epoxy for each bond pad. Finished, uniform
silver epoxy thickness should be between 1 – 2
mils. Cure epoxy per manufacturer’s schedule. For
extended cure times, temperatures must be below
200 °C.
Varactor diodes are ESD sensitive and can be
damaged by static electricity. Proper ESD tech-
niques and precautions should be followed when
handling these devices.
General Handling
The protective polymer coating on the active areas
of these devices provides scratch protection, par-
ticularly for the metal Airbridge which contacts the
anode. Dice can be handled with tweezers or vac-
uum pickups and are suitable for use with auto-
matic pick-and-place equipment.
Specifications Subject to Change Without Notice.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHs Compliant
GaAs Flip-Chip Multiplier Varactor Diode
MA46H146
V3
Dimensions
DIMENSION
INCHES
MILLIMETERS
MIN
MAX
0.027
0.015
0.008
0.009
0.008
0.017
MIN
0.64
0.30
0.15
0.18
0.15
0.38
MAX
0.69
0.38
0.20
0.23
0.20
0.43
0.025
0.012
0.006
0.007
0.006
0.015
A
B
C
D
E
F
Circuit Mounting Dimensions (inches)
Specifications Subject to Change Without Notice.
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号:
©2020 ICPDF网 联系我们和版权申明