MA47200 [TE]
Stripline PIN Diode Switch Modules; 带状线PIN二极管开关模块
| 型号： | MA47200 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Stripline PIN Diode Switch Modules |
| 文件： | 总3页 (文件大小：142K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MA47200 Series
Stripline PIN Diode Switch Modules
Features
Rev. V3
Absolute Maximum Ratings1 @ TA = +25°C
(unless otherwise specified)
•
•
•
•
•
•
Broadband 50 Ohms Design Through X Band
High Power Capacity
Voltage Ratings to 1000V
Fast Switching Speeds
Hermetically Sealed Package
RoHS Compliant
Parameter
Absolution Max.
Voltage
Voltage Rating
- 65°C to +150°C
-65°C to +175°C
Operating Temperature
Storage Temperature
Description
Pdiss= 150°C-T ambient
Thermal Resistance
Power Dissipation
This series of M/ACOM semiconductor products is
hermetically sealed strip-line package PIN diode
designed to drop into a 50 ohm strip-line circuit with-
out external matching. The MA47200 series can be
used as SPST reflective switches and are useful in
applications from VHF through X Band. Several
modules are provided with different power and
switching speed capability.
1. Operation of this device above any one of these parameters
may cause permanent damage.
Stripline Packages
This series of strip-line switch modules consist of
shunt mounted passivated PIN diodes in hermetic
strip-line packages. These modules are optimized
for 50 ohm micro-strip and strip-line circuits. The
MA47200 series modules maybe operated as a
switch by applying the appropriate forward and re-
verse DC excitation. They can also be used as at-
tenuators by varying the forward DC current.
ODS-144
ODS-114
Applications
The MA47200 series of broadband shunt-mounted
PIN diodes features a shunt-mounted PIN chip with
an appropriate series inductance to produce a
matched low pass filter structure at zero or reverse
bias condition. By applying +10mA to +100mA to
center conductor the diode’s impedance changes to
a low-impedance inductive short causing the diode
to reflect RF power. The forward bias current
(+10mA to +100mA) must be applied in order to
achieve high isolation.
Internal Wiring Diagram
Specifications subject to change without prior notification.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA47200 Series
Stripline PIN Diode Switch Modules
Rev. V3
Environmental Ratings (Per MIL-STD 750)
The following table is recommended for Group B and C testing
for TX, TXV level screening.
Screened Diodes (Per MIL-STD 750)
Suggested 100% preconditioning and screening program for
TX level and TXV level screening.
Inspection
Method
Condition
Inspection
Method
Condition
Internal Visual
and / or X-Ray
Storage
Temperature
2072,2076
See Note 1
1031
See Maximum Ratings
High Temp.
Storage
48 hours minimum @
max. storage temp.
Operating
Temperature
1032
1051
2006
——
See Maximum Ratings
Thermal Shock
10 Cycles
Temperature
Cycling
5 cycles
- 65°' to + 150°C
1051
Constant
Acceleration
20,000 g's, Y1
Shock
2016
2056
500 g’s
15 g’s
Fine Leak
Gross Leak
Electrical
Burn-In
1071
1071
——
1038
H
Vibration
C or E
Constant
Acceleration
2006
1021
20,000 g’s
10 days
See Note
See Note
Humidity
1. Internal Visual on TXV screening programs only. X-Ray is
optional for any screening plan.
2. Conditions and details of test depend on specific model num-
ber. Information available upon request.
Specifications @ Tambient = + 25°C
Part
Test
Maximum Minimum Minimum
Maximum
Thermal
Nominal Switching
Speed (nS)
Number1 Frequency Insertion3
Isolation
@ IF
(dB)
Reverse
(GHz)
Loss @ VR
(dB)
Voltage4 Resistance
RF Off to RF On to
VR
(°C/W)
RF On
RF Off
(Volts)
MA47208
MA47222
MA47223
1
8
0.25@20V
30dB @
25mA
1000
150
10
300
150
0.50dB
@0V
20dB @
100mA
20
20
100
150
30
30
4-82
0.50dB
@0V
20dB @
100mA
500
1. All models have cathode heatsink
2. Swept frequency measurement
3. Maximum SWR is 1.5:1 at specified insertion loss condition.
4. Maximum reverse current is 10μA at specified voltage rating.
Specifications subject to change without prior notification.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA47200 Series
Stripline PIN Diode Switch Modules
Outline Drawing
Rev. V3
114
Specifications subject to change without prior notification.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明