MA4E1318 [TE]
GaAs Flip Chip Schottky Barrier Diodes; 砷化镓倒装芯片肖特基势垒二极管型号: | MA4E1318 |
厂家: | TE CONNECTIVITY |
描述: | GaAs Flip Chip Schottky Barrier Diodes |
文件: | 总5页 (文件大小:160K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GaAs Flip Chip
Schottky Barrier Diodes
MA4E1317, MA4E1318,
MA4E1319-1, MA4E1319-2 V1
Features
MA4E1317
·
·
·
·
·
·
Low Series Resistance
Low Capacitance
High Cutoff Frequency
Silicon Nitride Passivation
Polyimide Scratch Protection
Designed for Easy Circuit Insertion
Description and Applications
M/A-COM's MA4E1317 single, MA4E1318 anti-parallel
pair, MA4E1319-1 reverse tee and MA4E1319-2
series tee are gallium arsenide flip chip Schottky
barrier diodes. These devices are fabricated on
OMCVD epitaxial wafers using a process designed
for high device uniformity and extremely low
parasitics. The diodes are fully passivated with
silicon nitride and have an additional layer of
polyimide for scratch protection. The protective
coatings prevent damage to the junction during
MA4E1318
automated or manual handling.
The flip chip
configuration is suitable for pick and place insertion.
The high cutoff frequency of these diodes allows use
through millimeter wave frequencies. Typical applications
include single and double balanced mixers in PCN
transceivers and radios, police radar detectors, and
automotive radar detectors. The devices can be
used through 80 GHz.
MA4E1319-1
The MA4E1318 anti-parallel pair is designed for use
in subharmonically pumped mixers. Close matching
of the diode characteristics results in high LO
suppression at the RF input.
MA4E1319-2
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
GaAs Flip Chip
Schottky Barrier Diodes
MA4E1317, MA4E1318,
MA4E1319-1, MA4E1319-2 V1
Electrical Specifications @ Ta = 25 °C
Parameters and Test Conditions
Symbol Units
MA4E1317
MA4E1318
MA4E1319-1 or -2
Min
Typ
Max
.060
Min
Typ
Max
Min
Typ
Max
Junction Capacitance at 0V at 1 Mhz
Cj
pF
.020
.0203
.0203
Total Capacitance at 0V at 1 Mhz1
Junction Capacitance Difference
Series Resistance at +10mA2
Forward Voltage at +1mA
Ct
pF
pF
.030
.045
.0303
.0453
.005
4
.0603
.010
7
.0303
.0453
.005
4
.0603
.010
7
DCj
Rs
Ohms
Volts
Volts
Volts
dB
4
7
Vf1
DVf
Vbr
NF
.60
4.5
.70
.80
.60
.70
.80
.60
4.5
.70
.005
7
.80
Forward Voltage Difference at 1mA
Reverse Breakdown Voltage at -10uA
SSB Noise Figure
.005
.010
.010
7
6.54
6.54
6.54
Notes:
1. Total capacitance is equivalent to the sum of junction capacitance Cj and parasitic capacitance Cp.
2. Series resistance is determined by measuring the dynamic resistance and subtracting the junction resistance of 2.6 ohms.
3. Capacitance for the MA4E1318 and MA4E1319-1 or -2 is per Schottky diode.
4. Measured at an LO frequency of 9.375 Ghz, with an IF frequency of 300 Mhz. LO drive level is +6 dBM for a single Schottky junction. The
IF noise figure contribution (1.5 dB) is included.
Absolute Maximum Ratings @ 25 °C
(Unless Otherwise Noted) 1
Forward Current vs Temperature
100.00
Parameter
Absolute Maximum
Operating Temperature
Storage Temperature
Junction Temperature
Incident LO Power
-65 °C to +125 °C
-65 °C to +150 °C
+175 °C
10.00
°
T=125
C
1.00
0.10
0.01
0.00
+ 20 dBm
Incident RF Power
+ 20 dBm
°
°
T=25 C
T=-50 C
Mounting Temperature
+235 °C for 10 seconds
1. Operation of this device above any one of these parameters
may cause permanent damage.
0.20
0.30
0.40
0.50
0.60
Forward Voltage (V)
0.70
0.80
0.90
1.00
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
GaAs Flip Chip
Schottky Barrier Diodes
MA4E1317, MA4E1318,
MA4E1319-1, MA4E1319-2 V1
Mounting Techniques
Handling
These chips were designed to be inserted onto hard
or soft substrates with the junction side down. They
can be mounted with conductive epoxy or with a low
temperature solder preform. The die can also be
assembled with the junction side up, and wire or
ribbon bonds made to the pads.
The following precautions should be observed to
avoid damaging these chips:
Cleanliness: These chips should be handled in a
clean environment. Do not attempt to clean die after
installation.
Static Sensitivity: Schottky barrier diodes are ESD
sensitive and can be damaged by static electricity.
Proper ESD techniques should be used when
handling these devices.
Solder Die Attach: Solders with < 30% Sn by volume
or weight are recommended. 80 Au / 20 Sn and
Indalloy #2 solders are recommended. Do not
expose die to a temperature greater than 235°C, or
greater than 200°C for longer than 10 seconds. No
more than three seconds of scrubbing should be
required for attachment.
General Handling: The protective polymer coating
on the active areas of these die provides scratch
protection, particularly for the metal airbridge which
contacts the anode. Die can be handled with
tweezers or vacuum pickups and are suitable for use
with automatic pick-and-place equipment.
Conductive epoxy Die Attach: Assembly can be
preheated to 125 - 150°C. Use a controlled amount
of epoxy approximately 2 mils thick. Cure epoxy as
per manufacturer’s schedule. For extended cure
times, temperatures should be kept below 200°C.
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
GaAs Flip Chip
Schottky Barrier Diodes
MA4E1317, MA4E1318,
MA4E1319-1, MA4E1319-2 V1
Chip Outline Drawings
MA4E1317
Case Style 1278
MA4E1318
Case Style 1197
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
GaAs Flip Chip
Schottky Barrier Diodes
MA4E1317, MA4E1318,
MA4E1319-1, MA4E1319-2 V1
Chip Outline Drawings
MA4E1319-1
Case Style 1199
MA4E1319-2
Case Style 1200
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号:
©2020 ICPDF网 联系我们和版权申明