MA4P504-144 [TE]
Stripline PIN Diode Switch Modules; 带状线PIN二极管开关模块
| 型号： | MA4P504-144 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Stripline PIN Diode Switch Modules |
| 文件： | 总2页 (文件大小：82K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MA4P504-144
Stripline PIN Diode Switch Modules
V1
Absolute Maximum Ratings1 @ TA = +25°C
(unless otherwise specified)
Features
•
•
•
•
•
•
Broadband 50 Ohms Design Through X Band
High Power Capacity
Voltage Ratings to 1000V
Fast Switching Speeds
Hermetically Sealed Package
RoHS Compliant
Parameter
Absolution Max.
Voltage
Voltage Rating
- 65°C to +150°C
-65°C to +175°C
Operating Temperature
Storage Temperature
Pdiss= 150°C-T ambient
Thermal Resistance
Description
Power Dissipation
This series of M/ACOM semiconductor products is
hermetically sealed strip-line package PIN diode
designed to drop into a 50 ohm strip-line circuit with-
out external matching. The MA4P504-144 can be
used as SPST reflective switches and are useful in
applications from VHF through X Band. Several
modules are provided with different power and
switching speed capability.
1. Operation of this device above any one of these parameters
may cause permanent damage.
Stripline Packages
This series of strip-line switch modules consist of
shunt mounted passivated PIN diodes in hermetic
strip-line packages. These modules are optimized
for 50 ohm micro-strip and strip-line circuits. The
MA4P504-144 series modules maybe operated as a
switch by applying the appropriate forward and re-
verse DC excitation. They can also be used as at-
tenuators by varying the forward DC current.
ODS-144
Applications
The MA4P504-144 broadband shunt-mounted PIN
diode features a shunt-mounted PIN chip with an
appropriate series inductance to produce a matched
low pass filter structure at zero or reverse bias con-
dition. By applying +10mA to +100mA to center con-
ductor the diode’s impedance changes to a low-
impedance inductive short causing the diode to re-
flect RF power. The forward bias current (+10mA to
+100mA) must be applied in order to achieve high
isolation.
Internal Wiring Diagram
Specifications subject to change without prior notification.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P504-144
Stripline PIN Diode Switch Modules
V1
Specifications @ Tambient = + 25°C
Part Number1
MA4P504-144
Typical
Typical
Typical
Isolation
@ IF
Minimum
Reverse
Maximum
Thermal
Nominal Switching
Speed (nS)
Frequency Insertion2
(GHz)
4-82
Loss @ VR
(dB)
Voltage4 Resistance
RF Off to RF On to
(dB)
VR
(Volts)
(°C/W)
RF On
RF Off
0.50dB
@0V
20dB @
100mA
500
20
150
30
1. All models have cathode heatsink
2. Maximum SWR is 1.5:1 at specified insertion loss condition.
3. Maximum reverse current is 10μA at specified voltage rating.
Outline Drawing
Environmental Ratings (Per MIL-STD 750)
The following table is recommended for Group B and C test-
ing for TX, TXV level screening.
Inspection
Method
Condition
Storage
Temperature
1031
See Maximum Ratings
Operating
Temperature
——
See Maximum Ratings
Temperature
Cycling
5 cycles
- 65°' to + 150°C
1051
Shock
2016
2056
500 g’s
15 g’s
Vibration
Constant
Acceleration
2006
1021
20,000 g’s
10 days
Humidity
Specifications subject to change without prior notification.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明