MAAD-008866 [TE]
75 Ω Digital Attenuator, 6-Bit, Serial / Parallel Control; 75 Ω数字衰减器, 6位,串行/并行控制型号: | MAAD-008866 |
厂家: | TE CONNECTIVITY |
描述: | 75 Ω Digital Attenuator, 6-Bit, Serial / Parallel Control |
文件: | 总9页 (文件大小:368K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MAAD-008866
75 Ω Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Functional Schematic 5
Features
•
•
•
75 Ω Impedance
Integrated TTL/CMOS Compatible Driver
Parallel & Serial (P/S) Control with power-up
state selection
•
•
•
•
•
0.5-dB Attenuation Steps to 31.5 dB
Low DC Power Consumption
Lead-Free 4mm PQFN-24LD Plastic Package
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Re-flow Compatible
Description
The MAAD-008866 is a 6-bit, 0.5-dB step GaAs
digital attenuator in a lead-free 4mm PQFN-24LD
surface mount plastic package. The MAAD-008866
is ideally suited for use where high accuracy, very
low power consumption and low intermodulation
products are required. This part can be used in all
75 ꢀ systems operating up to 1 GHz.
5. Blocking capacitors are required on all RF ports
Pin Configuration
Ordering Information 1,2
Pin No.
Function
Pin No.
Function
Part Number
Package
Parallel / Serial
Select
1
13
RF Output
MAAD-008866-TR3000
MAAD-008866-001SMB
3000 piece reel
Sample Board
2
3
Clock
Serial Data In
Latch Enable
GND
14
15
No Connect
Serial Data Out
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
4
16
Power Up State 2
5
17
Power Up State 1
Absolute Maximum Ratings 3,4
6
RF Input
RF GND
RF GND
RF GND
RF GND
RF GND
RF GND
18
Bias Voltage
Parameter
Absolute Maximum
7
19
B5
B4
B3
B2
B1
B0
Input Power
50 MHz
1000 MHz
8
20
+15 dBm
+27 dBm
9
21
10
11
12
25
22
Operating Voltage
Control Voltage
+8.5 V
23
-0.5 V < VC < 5.5 V
-40°C to +85°C
-65°C to +150°C
24
Operating Temperature
Storage Temperature
Paddle6
6. The exposed pad centered on the package bottom must be
connected to the RF and DC ground.
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-008866
75 Ω Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Electrical Specifications 7,8: TA = 25°C, Z0 = 75 ꢀ, VDD = 5 V, VC = 5 V
Parameter
Test Conditions
Units
Min.
Typ.
Max.
5 MHz
50 MHz
500 MHz
1000 MHz
—
—
—
—
1.3
1.35
1.6
—
—
—
Reference Insertion Loss
dB
1.8
2.3
Any Bit or combination
5 - 1000 MHz
Attenuation Accuracy
± (0.15 dB + 4% of attenuation setting in dB)
Return Loss
Trise, Tfall
Ton, Toff
5 - 1000 MHz
10% to 90% RF, 90% to 10% RF
50% Control to 90 / 10% RF
In Band
dB
ns
—
—
—
—
18
320
340
88
—
—
—
—
ns
Transients
mV
50 MHz
1000 MHz
12
25.6
Input P1dB
dBm
—
—
0 dBm/tone at Input, 6 MHz Spacing
33
43
IIP3
50 MHz
1000 MHz
dBm
—
—
0 dBm/tone at Input, 6 MHz Spacing
51
74
IIP2
50 MHz
1000 MHz
dBm
—
—
Composite Triple Beat, CTB
132 channels, +30 dBmV/channel at the input
dBc
dBc
µA
—
—
—
88
69
4
—
—
—
Composite Second Order, CSO 132 channels, +30 dBmV/channel at the input
Steady State IDD VDD = +5 V
7. External DC blocking capacitors are required on all RF ports. Loss varies at 0.003 dB/°C.
8. Low frequency is determined by DC block and RF GND capacitor value.
Truth Table 9
Application 10
B5
1
B4
1
B3
1
B2
1
B1
1
B0 Attenuation (dB)
1
0
1
1
1
1
1
0
Reference IL
1
1
1
1
1
0.5
1
1
1
1
1
0
1
1
1
0
1
2
1
1
0
1
1
4
1
0
1
1
1
8
0
1
1
1
1
16
31.5
0
0
0
0
0
9. 0 = 0 to 0.8V, 1 = 2 to 5V.
10.Capacitors C3 - C8 should be as close to package pins as
possible.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-008866
75 ꢀ Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Recommended PCB
Off-Chip Component Values
Component
Value
0.1 µF
0.1 µF
0.01 µF
Package
C1 & C2
C3 - C8
C9
0402
0201
0402
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices. An external protection circuit using an
inexpensive anti-parallel diode pair can be used to
protect the IC.
Please reference application note AN3028 on
http://www.macomtech.com for further detail.
Lead Free 4 mm 24-Lead PQFN †
† Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-008866
75 ꢀ Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Typical Performance Curves
Insertion Loss
Relative Attenuation across all major states
0.0
0
-5
-0.4
-0.8
-1.2
-1.6
-2.0
-2.4
+25°C
-40°C
+85°C
-10
-15
-20
-25
-30
-35
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
0.0
0.2
0.4
0.6
0.8
1.0
0.0
0.2
0.4
0.6
0.8
1.0
Frequency (GHz)
Frequency (GHz)
Input Return Loss, across all attenuation states
Output Return Loss, across all attenuation states
0
0
0.5 dB
1 dB
2 dB
4 dB
8 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
-5
-5
-10
-10
16 dB
31.5 dB
-15
-15
-20
-25
-30
-35
-40
-20
-25
-30
-35
-40
0.0
0.2
0.4
0.6
0.8
1.0
0.0
0.2
0.4
0.6
0.8
1.0
Frequency (GHz)
Frequency (GHz)
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-008866
75 ꢀ Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Typical Performance Curves @ 5 Volts
Step Error vs. State over Frequency
Step Error vs. State over Temp @ 5 MHz
1.00
1.00
0.75
5 MHz
50 MHz
500 MHz
1000 MHz
0.75
0.50
+25°C
-40°C
+85°C
0.50
0.25
0.25
0.00
0.00
-0.25
-0.50
-0.75
-1.00
-0.25
-0.50
-0.75
-1.00
0
4
8
12
16
20
24
28
32
0
4
8
12
16
20
24
28
32
State (dB)
State (dB)
Step Error vs. State over Temp @ 500 MHz
Step Error vs. State over Temp @ 1000 MHz
1.00
1.00
0.75
0.75
+25°C
+25°C
-40°C
-40°C
+85°C
+85°C
0.50
0.50
0.25
0.00
0.25
0.00
-0.25
-0.50
-0.75
-1.00
-0.25
-0.50
-0.75
-1.00
0
4
8
12
16
20
24
28
32
0
4
8
12
16
20
24
28
32
State (dB)
State (dB)
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-008866
75 ꢀ Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Typical Performance Curves @ 5 Volts
IIP3 vs. Frequency @ 25°C
IIP2 vs. Frequency @ 25°C
60
100
90
80
70
60
50
40
30
20
10
0
50
40
30
20
10
0
IL
IL
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
0
200
400
600
800
1000
1000
1000
0
200
400
600
800
1000
Frequency (MHz)
Frequency (MHz)
IIP3 vs. Frequency @ -40°C
IIP2 vs. Frequency @ -40°C
60
100
90
80
70
60
50
40
30
20
10
0
50
40
30
20
10
0
IL
IL
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
0
200
400
600
800
0
200
400
600
800
1000
Frequency (MHz)
Frequency (MHz)
IIP3 vs. Frequency @ +85°C
IIP2 vs. Frequency @ +85°C
100
90
80
70
60
50
40
30
20
10
0
60
50
40
30
20
10
0
IL
IL
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
0
200
400
600
800
1000
0
200
400
600
800
Frequency (MHz)
Frequency (MHz)
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-008866
75 ꢀ Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Functionality
Modes of Operation: Serial, Direct Parallel, and Latched Parallel
Mode Truth Table
P/S
1
LE
X
Mode
Serial
0
Constant High
Pulsed
Direct Parallel
Latched Parallel
0
Serial Mode
The serial control interface (SERIN, CLK, LE, SEROUT) is compatible with the SPI protocol. SPI mode is
activated when P/S is kept high. The 6-bit serial word must be loaded with MSB first. After shifting in the 6 bit
word, bringing LE high will set the attenuator to the desired state. While LE is high the CLK is masked to protect
the data while implementing the change . SEROUT is the SERIN delayed by 6 clock cycles.
When P/S is low, the serial control interface is disabled and the serial input register is loaded asynchronously with
parallel digital inputs.
Direct Parallel Mode
The parallel mode is enabled when P/S is set to low. In the direct parallel mode, the attenuator is controlled by the
parallel control inputs directly. The LE must be at logic high to control the attenuator in this mode.
Latched Parallel Mode
In the latched parallel mode, the parallel control inputs will be buffered by registers, and loaded to the outputs
when LE is high. The outputs shall not change states when LE is low.
Power-up States
The power-up (PUP) states will work in both serial and parallel modes, and initiate the attenuator according to the
PUP truth table. During power up, the digital inputs shall be held constant for at least 1 μs after VCC reaches 90%
of final value. For serial mode, the PUP states will only work when LE is held low. The PUP state shall be locked
out after the first LE pulse.
7
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-008866
75 ꢀ Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Functionality
Modes of Operation: Serial, Direct Parallel, and Latched Parallel
PUP Truth Table
Inputs
Gain Relative to Max. Gain
Notes
PS
0
LE
0
PUP2
PUP1
0
0
1
1
X
X
X
0
1
0
1
X
X
X
-31.5 dB
-24 dB
0
0
0
0
-16 dB
Parallel Mode
Serial Mode
0
0
Insertion Loss
0
1
0 to –31.5 dB (Set VC0.5 - VC16)
0 to –31.5 dB (Set VC0.5 - VC16)
No Definition
1
0
1
1
Serial Interface Timing Characteristics
Typical Performance
25°C
Symbol
Parameter
Units
-40°C
100
20
+85°C
100
20
tSCK
tCS
Min. Serial Clock Period
Min. Control Set-up Time
Min. Control Hold Time
Min. LE Set-up Time
100
20
ns
ns
ns
ns
ns
ns
ns
tCH
20
20
20
tLS
10
10
10
tLEW
tLH
Min. LE Pulse Width
10
10
10
Min. Serial Clock Hold Time from LE
Min. LE Pulse Spacing
10
10
10
tLES
630
630
630
8
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-008866
75 ꢀ Digital Attenuator, 6-Bit, Serial / Parallel Control
31.5 dB, 0.005 - 1.0 GHz
Rev.V1
Functionality
Modes of Operation: Serial, Direct Parallel, and Latched Parallel
Serial Input Interface Timing Diagram
Parallel Control Word
tLEW
LE
tLS
tLH
30ns Minimum
9
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明