MAAL-007673-000000 [TE]
Low Noise Amplifier 1.7 - 2.0 GHz; 低噪声放大器1.7 - 2.0 GHz的型号: | MAAL-007673-000000 |
厂家: | TE CONNECTIVITY |
描述: | Low Noise Amplifier 1.7 - 2.0 GHz |
文件: | 总4页 (文件大小:159K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RoHS
Compliant
Low Noise Amplifier
1.7 - 2.0 GHz
MAAL-007673
V1
Features
Functional Schematic
•
•
•
•
•
•
•
•
•
•
•
Low Noise Figure: 1.65 dB
High Gain: 20 dB
Low Power Consumption: 3 to 5 V, 8 mA
High Dynamic Range
DC Decoupled RF Input and Output
No External RF Tuning Elements Necessary
Lead-Free Low Cost SOIC-8 Plastic Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RF OUT
6
GND
8
VDD
7
GND
5
RoHS* Compliant Version of MAAM12031
Description
M/A-COM’s MAAL-007673 is a high performance
GaAs MMIC low noise amplifier in a lead-free SOIC
8-lead surface mount package. The MAAL-007673
employs a fully monolithic design which eliminates
the need for external tuning networks. It can be
biased using 3 or 5 volt supplies and has an option
for biasing at higher currents for increased dynamic
range.
1
2
3
4
GND
GND
R1
(optional)
RF IN
Pin Configuration
Pin No.
Function
Pin No.
Function
The MAAL-007673 is ideally suited for use where
low noise figure, high gain, high dynamic range and
1
2
3
4
Ground
R1 (Optional)
RF Input
5
6
7
8
Ground
RF Output
VDD
low power consumption are required.
Typical
applications include receiver front ends in the
Japanese Personal Handy Phone Service (PHS),
Private Branch Exchange (PBX) and Personal
Communications and Networks (PCS, PCN)
markets, as well as standard gain blocks, buffer
amps, driver amps and IF amps in both fixed and
portable systems.
Ground
Ground
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
VDD
+10 VDC
+17 dBm
30 mA
M/A-COM’s MAAL-007673 is fabricated using a
mature 0.5-micron gate length GaAs process. The
process features full passivation for increased
performance reliability.
Input Power
Current 4
Channel Temperature 5
Operating Temperature
Storage Temperature
+150°C
-40°C to +85°C
-65°C to +150°C
Ordering Information1
Part Number
Package
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. Only if pin 2 is used to increase current (see note 9).
5. Typical thermal resistance (θjc) = +165°C/W.
MAAL-007673-000000
MAAL-007673-TR1000
MAAL-007673-TR3000
Bulk Packaging
1000 piece reel
3000 piece reel
1. Reference Application Note M513 for reel size information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Low Noise Amplifier
1.7 - 2.0 GHz
MAAL-007673
V1
Electrical Specifications6: TA = 25°C, VDD = +5 V, Z0 = 50 Ω
Parameter
Gain
Test Conditions
1.7 - 2.0 GHz, PIN = -30 dBm
1.7 - 2.0 GHz
Units
dB
Min
18
Typ
20
Max
22
Noise Figure
Input VSWR
dB
—
1.65
1.7:1
2.00
—
1.7 - 2.0 GHz, PIN = -30 dBm
Ratio
—
Output VSWR
Output 1 dB Compression
Input IP3
1.7 - 2.0 GHz, PIN = -30 dBm
1.7 - 2.0 GHz
Ratio
dBm
dBm
dB
—
—
—
—
5
1.7:1
7
—
—
—
—
11
1.7 - 2.0 GHz, PIN = -30 dBm
1.7 - 2.0 GHz, PIN = -30 dBm
—
-1
Reverse Isolation
Bias Current
38
8
mA
6. See plots for 3-volt performance.
Application Schematic 7,8,9
Recommended PCB Configuration
VDD
L1
C1
RF IN
RF OUT
R1
(Optional)
See Note 9
7. Pins 1, 4, 5 and 8 must be RF and DC grounded as shown.
8. Pin 3 is the RF input, pin 6 is the RF output. VDD is
applied on pin 7. This pin must be bypassed with a 500 pF
surface mount MLC capacitor, mounted as close as
possible to pin 7, and RF decoupled with a chip inductor
having a minimum value of 15 nH (as shown in the
Recommended PCB Configuration).
Component List
9. Pin 2 allows use of an external resistor to ground for
optional, higher current bias. For nominal current
operation no resistor is used. For optional 20 mA current
operation, connect a 35 to 40 ohm chip resistor (as show in
the Recommended PCB Configuration).
Part
C1
Value
500 pF
Case Size Manufacturer
0603
0805
0603
Murata
Coilcraft
L1
15 nH
R1
35 to 40 Ω
Panasonic
(Optional)
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Low Noise Amplifier
1.7 - 2.0 GHz
MAAL-007673
V1
Typical Performance Curves
Noise Figure @ +25°C
Gain @ +25°C
24
1.9
3 VOLTS, 8mA
5 VOLTS, 8mA
5 VOLTS, 20mA
3 VOLTS, 8mA
5 VOLTS, 8mA
5 VOLTS, 20mA
22
20
18
16
1.8
1.7
1.6
1.5
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
1.7
1.8
1.9
2.0
Frequency (GHz)
Frequency (GHz)
VSWR @ 5 V, 8 mA, +25°C
Input IP3 @ +25°C
3.0
2
INPUT
0
-2
-4
-6
OUTPUT
2.5
2.0
1.5
1.0
3 VOLTS, 8mA
5 VOLTS, 8mA
5 VOLTS, 20mA
-8
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
1.7
1.8
1.9
2.0
Frequency (GHz)
Frequency (GHz)
Noise Figure @ 5 V, 8 mA
Gain @ 5 V, 8 mA
2.4
24
+25 C
-40 C
+85 C
+25 C
-40 C
+85 C
2.1
1.8
1.5
1.2
22
20
18
16
1.70
1.75
1.80
1.85
1.90
1.95
2.00
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
Frequency (GHz)
Frequency (GHz)
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Low Noise Amplifier
1.7 - 2.0 GHz
MAAL-007673
V1
Lead-Free SOIC-8†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Additional information is available in Application Note M540, “M/A-COM GaAs MMIC LNA SOIC-8 Platform”.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号:
©2020 ICPDF网 联系我们和版权申明