MAAM-011177-TR2500 [TE]
Push-Pull CATV Amplifier;
| 型号： | MAAM-011177-TR2500 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Push-Pull CATV Amplifier 有线电视 |
| 文件： | 总15页 (文件大小：1175K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Functional Schematic
Features
26 dB Gain, 45 - 1200 MHz Applications
28 dB Gain, 45 - 1000 MHz Applications
24 V DC Supply
Differential Inputs and Outputs
Low Distortion
Lead-Free TSSOP-16LD-EP package
Halogen-Free “Green” Mold Compound
RoHS* Compliant
1
RFIN2A
N/C
DCBIAS
A
16
2
RFOUT1A
N/C
15
14
13
3
4
5
RFOUT2A
N/C
RFIN1A
RFIN1B
N/C
12
6
7
8
RFOUT2B
N/C
ISET
11
10
9
RFOUT1B
Description
DCBIAS
B
RFIN2B
The MAAM-011177 is a broadband GaAs MMIC
differential amplifier in a lead-free TSSOP-16LD-EP
package. It is designed for integration in a 75 Ω
push-pull, low-distortion amplifier circuit.
Pin Configuration3
Pin No.
Pin Name
DCBIAS
Description
This amplifier is ideally suited for use in CATV
applications where low noise figure and low
distortion are required.
1
2
A
Amp1A DC Bias
Amp1A RFOUT
No Connection
Amp1A RFIN
RFOUT1A
N/C
3
4
RFIN1A
RFIN1B
ISET
5
Amp1B RFIN
6
Current Set
7
RFOUT1B
Amp1B RFOUT
Amp1B DC Bias
Amp2B RFIN
8
DCBIASB
Ordering Information1,2
9
RFIN2B
N/C
Part Number
MAAM-011177
Package
10
11
12
13
14
15
16
17
No Connection
Amp2B RFOUT
No Connection
No Connection
Amp2A RFOUT
No Connection
Amp2A RFIN
Bulk Packaging
1000 Piece Reel
2500 Piece Reel
RFOUT2B
N/C
MAAM-011177-TR1000
MAAM-011177-TR2500
N/C
RFOUT2A
N/C
MAAM-011177-1SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
RFIN2A
Paddle4
RF and DC Ground
3. MACOM recommends grounding pin 3 and floating (leaving
unconnected) pins 10, 12, 13, and 15.
4. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Electrical Specifications5: Freq: 45 - 1200 MHz, TA = 25°C, VDD = 24 V, Z0 = 75 Ω
Parameter
Test Conditions
Units Min. Typ. Max.
45 MHz
1000 MHz
1200 MHz
24.0 25.0
25.0 26.0
25.0 26.4
Gain
dB
dB
dB
—
—
—
Gain Slope
—
—
—
1.4
45 MHz
1200 MHz
4.5
4.0
Noise Figure
Reverse Isolation
Input Return Loss
Output Return Loss
P1dB
—
45 – 1200 MHz
dB
dB
—
17
18
—
—
—
36
19
—
—
—
—
—
—
45 – 1200 MHz
dB
20
1200 MHz
dBm
dBm
dBm
24.5
43
OIP3
1200 MHz, 6 MHz Spacing, +15 dBm POUT per tone
1200 MHz, 6 MHz Spacing, +15 dBm POUT per tone
OIP2
63
79 NTSC Vo = +44 dBmV Flat
79 NTSC + 75 ATSC VO = +44 dBmV Flat
-74
-72
-68
—
CTB6
CSO6,7
XMOD6
dBc
dBc
dBc
—
—
—
79 NTSC Vo = +44 dBmV Flat
79 NTSC + 75 ATSC VO = +44 dBmV Flat
-75
-75
-67
—
79 NTSC VO = +44 dBmV Flat
79 NTSC + 75 ATSC VO = +44 dBmV Flat
-65
-64
—
CCNR6
IDD
79 NTSC + 75 ATSC VO = +44 dBmV Flat
+24 Volts
dBc
mA
—
—
68
—
265
280
5. See ‘Off-Chip Component Values: 45 - 1200 MHz Applications’ for the sample board BOM which corresponds to these specifications.
6. Digital channels are -6 dB relative to analog channels.
7. See Typical Performance Curves for frequency response of CSOL and CSOH.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Absolute Maximum Ratings8,9,10
Handling Procedures
Please observe the following precautions to avoid
damage:
Parameter
RF Input Power
Absolute Maximum
2 dBm
30 Volts
Voltage
Operating Temperature
Junction Temperature11
-40°C to +110°C
+160°C
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
Storage Temperature
-65°C to +150°C
8. Exceeding any one or a combination of these limits may
cause permanent damage to this device.
9. MACOM does not recommend sustained operation near
these survivability limits.
10. Operating at nominal conditions with TJ < +160°C will ensure
An external protection circuit using an inexpensive
anti-parallel diode pair can be used to protect the
IC. Please reference application note AN3028 on
http://www.macom.com for further detail.
MTTF > 1 x 106 hours.
11. Junction Temperature (TJ) = TC + Өjc * (V * I)
Typical thermal resistance (Өjc) = 5.5° C/W.
a) For TC = 25°C,
TJ = 60°C @ 24 V, 265 mA
b) For TC = 110°C,
TJ = 145 °C @ 24 V, 265 mA
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Typical Performance Curves: 45 - 1200 MHz Applications
Gain
Gain to 2 GHz
35
35
30
25
20
15
10
5
30
25
20
15
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
0
0.0
0.2
0.4
0.6
0.8
1.0
1.0
1.0
1.2
1.2
1.2
0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
Frequency (GHz)
Output Return Loss
Input Return Loss
0
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-10
-20
-30
-40
-10
-20
-30
-40
0.0
0.2
0.4
0.6
0.8
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Frequency (GHz)
Frequency (GHz)
Noise Figure
Reverse Isolation
8
0
+25°C
-40°C
+85°C
-10
-20
-30
-40
-50
-60
+25°C
-40°C
+85°C
6
4
2
0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0.0
0.2
0.4
0.6
0.8
Frequency (GHz)
Frequency (GHz)
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Typical Distortion Performance Curves: 79 NTSC V0 = +44 dBmV Flat @ +25°C
CTB
XMOD
-60
-60
-65
-70
-75
-80
-85
-90
-65
-70
-75
-80
-85
-90
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Frequency (GHz)
Frequency (GHz)
CSOH
CSOL
-70
-70
-75
-80
-75
-80
-85
-85
-90
-90
-95
-95
-100
-100
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Frequency (GHz)
Frequency (GHz)
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Typical Distortion Performance Curves: 79 NTSC + 75 ATSC V0 = +44 dBmV Flat @ +25°C
CTB
XMOD
-60
-60
-65
-70
-75
-80
-85
-90
-65
-70
-75
-80
-85
-90
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.0
0.1
0.1
0.1
0.2
0.3
0.4
0.5
0.5
0.5
0.6
0.6
0.6
Frequency (GHz)
Frequency (GHz)
CSOH
CSOL
-70
-70
-75
-80
-75
-80
-85
-85
-90
-90
-95
-95
-100
-100
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.0
0.2
0.3
0.4
Frequency (GHz)
Frequency (GHz)
CCNR
90
85
80
75
70
65
60
0.0
0.2
0.3
0.4
Frequency (GHz)
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Schematic Including Off-Chip Components
Off-Chip Component Values: 45 - 1200 MHz Applications
Component
C1 - C10
C11
Value
0.01 µF
0.5 pF
0.4 pF
0.2 pF
0.8 pF
1.2 pF
0.1 pF
15 nH
3.9 nH
0 Ω
Package
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
—
QTY
10
1
Vendor
MURATA
AVX
Part Number
GRM155R71H103KA88D
ACCU-P 04023J0R5AB
ACCU-P 04023J0R4AB
ACCU-P 04023J0R2AB
ACCU-P 04023J0R8AB
ACCU-P 04023J1R2AB
ACCU-P 04023J0R1AB
0402CS-15NXJL
C12
1
AVX
C13
1
AVX
C14
1
AVX
C15, C16
C17
2
AVX
1
AVX
L1 - L4
L5, L6
L7
4
COILCRAFT
COILCRAFT
—
2
0402CS-3N9XJL
1
SHORT — NOT USED
0402CS-3N3XJL
L8
3.3 nH
2 nH
1
COILCRAFT
COILCRAFT
PANASONIC
PANASONIC
PANASONIC
—
L9, L10
R1, R2
R3
2
0402CS-2N0XJL
255 Ω
2610 Ω
453 Ω
0 Ω
2
ERJ-2RKF2550X
1
ERJ-2RKF2611X
R4, R5
R6, R7
FB1, FB2
T1
2
ERJ-2RKF4530X
2
SHORT — NOT USED
BLM15HD182SN1D
MABA-010321-CT1A42
MABA-010441-CT38A0
1800 Ω
1:1
2
MURATA
MACOM
MACOM
1
T2
1:3
—
1
7
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Evaluation Board Layout
.
.
.
Evaluation Board Assembly12,13
Cut-out
U1
PCB
Pedestal
PCB
Pedestal
Heat Sink
Heat Sink
Chassis
12. Due to the high power dissipation of this part, a heat sink
must be attached to the printed circuit board.
13. The recommended assembly uses
a heat sink with a
Chassis
pedestal. The printed circuit board has a cut-out under the
part and the lead frame of the part is soldered directly to the
heat sink pedestal as shown. The heat sink should be
connected to the system chassis.
8
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Recommended Thermal Via Array
If a thermal pedestal is not desired, a dense
through-via pattern with copper fill or sufficient hole
plating is required for operation at a reliable
junction temperature. Generally, filled vias and thin
substrates are preferable.
Exposed
Pad
An example layout using 10-mil (0.254 mm)
finished hole diameter, 62-mil (1.575 mm) finished
board thickness is seen at right: TJ = 145°C with
PCB bottom heated to 85°C using 1.5-mil (38
micron) minimum copper via plating. Estimated
exposed pad temperature was TC = 110°C. It is
recommended that thermal vias extend beyond the
exposed pad and amplifier package as shown.
Plated Vias
Lead Free TSSOP 16-lead exposed paddle†
NOTES:
1. REFERENCE JEDEC MO-153-AB FOR ADDITIONAL DIMENSIONAL AND
TOLERANCE INFORMATION.
2. ALL DIMENSIONS SHOWN AS INCHES/MM.
†
Reference Application Note M538 for lead-free solder reflow recommendations and PCB footprint information.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
9
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Applications Section
Electrical Specifications14: Freq: 45 - 1000 MHz, TA = 25°C, VDD = 24 V, Z0 = 75 Ω
Parameter
Test Conditions
Units Min. Typ. Max.
45 MHz
1000 MHz
27
28
Gain
dB
dB
dB
—
—
—
—
—
—
Gain Slope
—
1
45 MHz
1000 MHz
4.5
4.0
Noise Figure
Reverse Isolation
Input Return Loss
Output Return Loss
P1dB
—
45 – 1000 MHz
dB
dB
—
—
—
—
—
—
38
19
20
26
39
61
—
—
—
—
—
—
45 – 1000 MHz
dB
1000 MHz
dBm
dBm
dBm
OIP3
1000 MHz, 6 MHz Spacing, +15 dBm POUT per tone
1000 MHz, 6 MHz Spacing, +15 dBm POUT per tone
OIP2
79 NTSC VO = +44 dBmV Flat
79 NTSC + 75 ATSC VO = +44 dBmV Flat
-73
-72
CTB15
CSO15
dBc
dBc
dBc
—
—
—
—
—
—
79 NTSC VO = +44 dBmV Flat
79 NTSC + 75 ATSC VO = +44 dBmV Flat
-75
-74
79 NTSC VO = +44 dBmV Flat
79 NTSC + 75 ATSC VO = +44 dBmV Flat
-63
-62
XMOD15
CCNR15
79 NTSC + 75 ATSC VO = +44 dBmV Flat
+24 Volts
dBc
mA
—
—
68
—
—
IDD
265
14. See ‘Off-Chip Component Values: 45 - 1000 MHz Applications’ for the sample board BOM which corresponds to these specifications.
15. Digital channels are -6 dB relative to analog channels.
10
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Off-Chip Component Values: 45 - 1000 MHz Applications
Component
Value
Package
QTY
Vendor
Part Number
C1 - C10
0.01 µF
0402
10
MURATA
GRM155R71H103KA88D
ACCU-P 04023J0R6AB
ACCU-P 04023J0R4AB
ACCU-P 04023J0R3AB
ACCU-P 04023J1R0AB
OPEN — NOT USED
OPEN — NOT USED
0402CS-22NXJL
C11
C12
0.6 pF
0.4 pF
0.3 pF
1.0 pF
—
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
—
1
1
1
1
0
0
2
2
3
1
2
6
1
2
1
1
AVX
AVX
C13
AVX
C14
AVX
C15, C16
C17
—
—
—
L1, L2
L3, L4
L5, L6, L8
L7
22 nH
18 nH
6.2 nH
2 nH
COILCRAFT
COILCRAFT
COILCRAFT
COILCRAFT
COILCRAFT
PANASONIC
PANASONIC
MURATA
MACOM
MACOM
0402CS-18NXJL
0402CS-6N2XJL
0402CS-2N0XJL
L9, L10
R1, R2, R4 - R7
R3
3.6 nH
300 Ω
2610 Ω
1800 Ω
1:1
0402CS-3N6XJL
ERJ-2RKF3000X
ERJ-2RKF2611X
FB1, FB2
T1
BLM15HD182SN1D
MABA-010321-CT1A42
MABA-010441-CT38A0
T2
1:3
—
11
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Typical Performance Curves: 45 - 1000 MHz Applications
Gain
Gain to 2 GHz
35
35
30
25
20
15
10
5
30
25
20
15
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0.0
0.5
1.0
1.5
2.0
1.2
1.2
Frequency (GHz)
Frequency (GHz)
Output Return Loss
Input Return Loss
0
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-10
-20
-30
-40
-10
-20
-30
-40
0.0
0.2
0.4
0.6
0.8
1.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Frequency (GHz)
Frequency (GHz)
Noise Figure
Reverse Isolation
0
8
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-15
-30
-45
-60
6
4
2
0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0.0
0.2
0.4
0.6
0.8
1.0
Frequency (GHz)
Frequency (GHz)
12
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Typical Distortion Performance Curves: 79 NTSC V0 = +44 dBmV Flat @ +25°C
XMOD
CTB
-60
-60
-65
-70
-75
-80
-85
-90
-65
-70
-75
-80
-85
-90
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Frequency (GHz)
Frequency (GHz)
CSOL
CSOH
-70
-70
-75
-80
-75
-80
-85
-85
-90
-90
-95
-95
-100
-100
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Frequency (GHz)
Frequency (GHz)
13
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
Typical Distortion Performance Curves: 79 NTSC + 75 ATSC V0 = +44 dBmV Flat @ +25°C
CTB
XMOD
-60
-60
-65
-70
-75
-80
-85
-90
-65
-70
-75
-80
-85
-90
0.0
0.1
0.1
0.1
0.2
0.3
0.4
0.5
0.5
0.5
0.6
0.6
0.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Frequency (GHz)
Frequency (GHz)
CSOH
CSOL
-70
-70
-75
-80
-75
-80
-85
-85
-90
-90
-95
-95
-100
-100
0.0
0.2
0.3
0.4
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Frequency (GHz)
Frequency (GHz)
CCNR
90
85
80
75
70
65
60
0.0
0.2
0.3
0.4
Frequency (GHz)
14
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-011177
Push-Pull CATV Amplifier
45 - 1200 MHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
15
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号：
©2020 ICPDF网 联系我们和版权申明