MAAMSS0058TR-3000 [TE]

RF Driver Amplifier 250 - 4000 MHz; RF驱动器放大器250 - 4000兆赫
MAAMSS0058TR-3000
型号: MAAMSS0058TR-3000
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

RF Driver Amplifier 250 - 4000 MHz
RF驱动器放大器250 - 4000兆赫

驱动器 放大器
文件: 总4页 (文件大小:227K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MAAMSS0058  
RF Driver Amplifier  
250 - 4000 MHz  
M/A-COM Products  
Preliminary - Rev. V1P  
Features  
Functional Block Diagram  
Tunable over a wide frequency range  
Output Intercept Point of up to +45 dBm  
Excellent ACPR performance  
High Efficiency  
Lead-Free SOIC-8EP Package  
100% Matte Tin Plating over Copper  
Halogen-Free “Green” Mold Compound  
RoHS* Compliant and 260°C Reflow Compatible  
Description  
M/A-COM’s MAAMSS0058 RF driver amplifier is a  
two stage GaAs MMIC which exhibits exceptional  
linearity performance as well as featuring high gain  
in a lead-free SOIC-8EP surface mount plastic  
package. The device runs off a single +5 volt supply  
and draws 1100 mA typically.  
Pin Configuration  
The MAAMSS0058 is fabricated using a high  
reliability GaAs HBT process to realize low current  
and high power functionality. The process features  
full passivation for increased performance and  
reliability.  
Pin No.  
Pin Name  
VCC1  
Description  
1st Stage VCC  
RF and DC Ground  
RF and DC Ground  
Amp Input  
1
2
3
4
5
6
7
8
GND  
GND  
RF In  
The MAAMSS0058 has been designed to be a  
functional driver amplifier from 250 to 4000 MHz.  
RF Out/ VCC2  
RF Out/ VCC2  
GND  
RF Out/ VCC2  
RF Out/ VCC2  
RF and DC Ground  
RF In Stage 2  
Ordering Information 1,2  
RF In2  
Part Number  
MAAMSS0058  
Package  
Absolute Maximum Ratings 3,4,5  
Bulk Packaging  
3000 piece reel  
Parameter  
RF Output Power  
Voltage  
Absolute Maximum  
MAAMSS0058TR-3000  
34 dBm  
6.5 volts  
Sample Only,  
250 - 4000 MHz tuning  
MAAM-000058-001SMB  
Operating Temperature  
Storage Temperature  
-40°C to +85°C  
-65°C to +150°C  
1. Reference Application Note M513 for reel size information.  
2. All sample boards include 5 loose parts.  
3. Exceeding any one or combination of these limits may cause  
permanent damage to this device.  
4. M/A-COM does not recommend sustained operation near  
these survivability limits.  
5. This amplifier has been designed to operate optimally in linear  
mode and will not function reliably in compressed or saturated  
mode.  
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.  
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for  
development. Performance is based on target specifications, simulated results, and/or prototype  
measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-  
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has  
been fixed. Engineering samples and/or test data may be available. Commitment to produce in  
volume is not guaranteed.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or  
information contained herein without notice.  
MAAMSS0058  
RF Driver Amplifier  
250 - 4000 MHz  
M/A-COM Products  
Preliminary - Rev. V1P  
Electrical Specifications: TA = 25°C, VCC = 5V, Z0 = 50  
Parameter  
Gain  
Test Conditions  
2140 MHz  
Units  
dB  
Min.  
Typ.  
20  
Max.  
Input Return Loss  
Output Return Loss  
Output P1dB  
2140 MHz  
dB  
12  
2140 MHz  
dB  
10  
2140 MHz  
dB  
33  
(+23 dBm / tone, 1 MHz spacing)  
2140 MHz  
Output IP3  
dBm  
dB  
45  
(@ -45 dBc ACPR, IS-95 9 channels fwd)  
2140 MHz  
Channel Power  
TBD  
Noise Figure  
2140 MHz  
+5 V  
dB  
5.5  
Quiescent Current  
mA  
1100  
Lead-Free SOIC-8EP†  
Reference Application Note M538 for lead-free solder reflow recommendations.  
Meets JEDEC moisture sensitivity level 1 requirements.  
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for  
development. Performance is based on target specifications, simulated results, and/or prototype  
measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-  
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has  
been fixed. Engineering samples and/or test data may be available. Commitment to produce in  
volume is not guaranteed.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or  
information contained herein without notice.  
MAAMSS0058  
RF Driver Amplifier  
250 - 4000 MHz  
M/A-COM Products  
Preliminary - Rev. V1P  
Recommended PCB Layout  
2140 MHz Schematic  
Transmission Line Dimensions  
Designator  
Length (mil) *  
Width (mil)  
15.0  
T1  
T2  
T3  
355  
125  
20  
15.0  
15.0  
* From package edge to center of component  
Parts List  
Part  
Value  
0.1 µF  
1000 pF  
1.2 pF  
1.0 pF  
3.3 pF  
7.5 nH  
1.5 nH  
8.2 nH  
-
Case Style  
0402  
0402  
0402  
0402  
0402  
0402  
0402  
0402  
-
Manufacturer  
Murata  
Murata  
Murata  
Murata  
ATC  
Purpose  
Bypass  
C1, C2  
C3, C4, C8, C9  
Bypass  
C5  
C6  
Interstage Match  
Input Match  
Output Match  
Bias Injection  
Input Match  
Bias Injection  
Jumper  
C7  
L1  
Coilcraft  
Toko  
L2  
L3  
Coilcraft  
-
J1, J2  
Cross Section View  
Handling Procedures  
Please observe the following precautions to avoid  
damage:  
Static Sensitivity  
Gallium Arsenide Integrated Circuits are sensitive  
to electrostatic discharge (ESD) and can be  
damaged by static electricity. Proper ESD control  
techniques should be used when handling these  
devices.  
The PCB dielectric between RF traces and RF ground lay-  
ers should be chosen to reduce RF discontinuities between  
50 lines and package pins. M/A-COM recommends an  
FR-4 dielectric thickness of 0.008” (0.20 mm) yielding a 50  
line width of 0.015” (0.38 mm). The recommended RF  
metalization is 1 ounce copper.  
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for  
development. Performance is based on target specifications, simulated results, and/or prototype  
measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-  
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has  
been fixed. Engineering samples and/or test data may be available. Commitment to produce in  
volume is not guaranteed.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or  
information contained herein without notice.  
MAAMSS0058  
RF Driver Amplifier  
250 - 4000 MHz  
M/A-COM Products  
Preliminary - Rev. V1P  
Typical Performance Curves, 2140 MHz Configuration  
Gain  
Input Return Loss  
25  
20  
15  
10  
5
-5  
-10  
-15  
-20  
-25  
-30  
+25°C  
-40°C  
+85°C  
+25°C  
-40°C  
+85°C  
2.00  
2.05  
2.10  
2.15  
2.20  
2.25  
2.00  
2.05  
2.10  
2.15  
2.20  
2.25  
2.25  
35  
Frequency (GHz)  
Frequency (GHz)  
Output Return Loss  
Noise Figure  
-5  
8
-10  
-15  
-20  
-25  
-30  
6
4
2
+25°C  
-40°C  
+85°C  
0
2.00  
2.05  
2.10  
2.15  
2.20  
2.25  
2.00  
2.05  
2.10  
2.15  
2.20  
Frequency (GHz)  
Frequency (GHz)  
P1dB @ 2140 MHz  
Output IP3 @ 2170 MHz  
30  
50  
45  
40  
35  
30  
25  
20  
15  
10  
+25°C  
-40°C  
+85°C  
OIP3L  
OIP3H  
10  
15  
20  
25  
30  
5
10  
15  
20  
25  
30  
35  
Output Power (dBm)/Tone  
Output Power (dBm)  
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for  
development. Performance is based on target specifications, simulated results, and/or prototype  
measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-  
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has  
been fixed. Engineering samples and/or test data may be available. Commitment to produce in  
volume is not guaranteed.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or  
information contained herein without notice.  

相关型号:

MAAMSS0060

Broadband CATV Amplifier 50 - 1000 MHz
TE

MAAMSS0060TR

Broadband CATV Amplifier 50 - 1000 MHz
TE

MAAMSS0060TR-3000

Broadband CATV Amplifier 50 - 1000 MHz
TE

MAAMSS0067

Low Noise CATV Amplifier 50 - 1000 MHz
TE

MAAMSS0067SMB

Low Noise CATV Amplifier 50 - 1000 MHz
TE

MAAMSS0067TR-3000

Low Noise CATV Amplifier 50 - 1000 MHz
TE

MAAMSS0070

High Dynamic Range Amplifier 250 - 3800 MHz
TE

MAAMSS0070TR-1000

High Dynamic Range Amplifier 250 - 3800 MHz
TE

MAAMSS0070TR-3000

High Dynamic Range Amplifier 250 - 3800 MHz
TE

MAAMSS0071

RF Driver Amplifier 300 - 4000 MHz
TE

MAAMSS0071TR-3000

RF Driver Amplifier 300 - 4000 MHz
TE

MAAMSS0072

RF Driver Amplifier 250 - 4000 MHz
TE