MAATCC0011 [TE]

Digital Attenuator 31.5dB, 6-Bit, TTL Driver, DC-4.0 GHz; 数字衰减器31.5分贝, 6位, TTL驱动器, DC- 4.0 GHz的
MAATCC0011
型号: MAATCC0011
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

Digital Attenuator 31.5dB, 6-Bit, TTL Driver, DC-4.0 GHz
数字衰减器31.5分贝, 6位, TTL驱动器, DC- 4.0 GHz的

驱动器 射频 微波 衰减器
文件: 总7页 (文件大小:329K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
RoHS  
Compliant  
Digital Attenuator  
3 1 .5 d B , 6 -B it, T T L Driv er, DC -4 .0 G H z  
M AAT C C 0 0 1 1  
V 3  
Features  
Schematic with Off-Chip Components  
ñ
ñ
ñ
ñ
ñ
ñ
ñ
ñ
ñ
ñ
ñ
ñ
Attenuation: 0.5 dB Steps to 31.5 dB  
Single Positive Supply  
Contains internal DC to DC converter  
Low DC Power Consumption  
Small Footprint, JEDEC Package  
Integral TTL Driver  
50 ohm Impedance  
Lead-Free CSP-1 Package  
100% Matte Tin Plating over Copper  
Halogen-Free —Green“ Mold Compound  
260°C Reflow Compatible  
RoHS* Compliant Version of AT90-1107  
Description  
M/A-COM's MAATCC0011 is a GaAs FET 6-bit  
digital attenuator with integral TTL driver. Step size  
is 0.5 dB providing a 31.5 dB total attenuation range.  
This device is in an PQFN plastic surface mount  
package. The MAATCC0011 is ideally suited for use  
where accuracy, fast speed, very low power  
consumption and low costs are required. For dual  
supply designs without switching noise, use  
MAATCC0009.  
Pin Configuration3  
Pin No.  
Function  
C8  
Pin No.  
17  
Function  
NC  
1
2
.
C4  
18  
NC  
3
C2  
19  
Vcc  
NC  
4
C1  
20  
5
C0.5  
C16  
GND  
NC  
21  
Cp  
Ordering Information  
6
22  
NC  
7
23  
Cp  
Part Number  
Package  
8
24  
NC  
MAATCC0011  
Bulk Packaging  
2
9
NC  
25  
VEE  
MAATCC0011TR  
MAATCC0011-TB  
1000 piece reel  
10  
11  
12  
13  
14  
15  
16  
NC1  
GND  
RF1  
GND  
NC  
26  
GND  
RF2  
GND  
NC1  
Sample Test Board  
27  
28  
Note: Reference Application Note M513 for reel size  
information.  
Note: Die quantity varies.  
29  
2
30  
VEE  
NC  
31  
NC  
NC  
32  
Vcc  
1. Pins 10 and 29 must be isolated.  
2. VEE is produced internally and requires a .1 µF cap to GND.  
Generated noise is typical of switching DC-DC Converters.  
3. The exposed pad centered on the package bottom must be  
connected to RF and DC ground. (For PQFN Packages)  
* Restrictions on Hazardous Substances, European Union  
Directive 2002/95/EC.  
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
Digital Attenuator  
3 1 .5 d B , 6 -B it, T T L Driv er, DC -4 .0 G H z  
M AAT C C 0 0 1 1  
V 3  
Electrical Specifications: TA = +25°C  
Parameter  
Insertion Loss  
Test Conditions  
Frequency  
Units  
Min  
Typ  
Max  
DC - 4.0 GHz  
dB  
4.5  
5.1  
Attenuation Accuracy  
Individual Bits 0.5-1-2-4-8-16 dB  
Any Combination of Bits  
1 to 31.5 dB  
DC - 4.0 GHz  
DC - 4.0 GHz  
dB  
dB  
±(.3 +7% of atten setting)  
±(.5 +8% of atten setting)  
VSW R  
Full Range  
DC - 4.0 GHz  
Ratio  
2.0:1  
2.2:1  
Switching Speed  
50% Cntl to 90%/10% RF  
10% to 90% or 90% to 10%  
nS  
nS  
75  
20  
1 dB Compression  
Input IP3  
50 MHz  
0.5 - 4.0 GHz  
dBm  
dBm  
+21  
+24  
Two-tone inputs up to +5 dBm  
50 MHz  
0.5-4.0 GHz  
dBm  
dBm  
+35  
+48  
Vcc  
V
4.75  
5.0  
5.25  
VIL  
VIH  
LOW -level input voltage  
HIGH-level input voltage  
V
V
0.0  
2.0  
0.8  
5.0  
lin (Input Leakage Current)  
Icc4  
Vin = VCC or GND  
uA  
mA  
mA  
mA  
-1.0  
6
1.0  
10  
Vcc min to max, Logic —0“ or —1“  
For guaranteed start-up  
Turn-on Current5  
125  
1.0  
Icc  
VCC = Max, Vcntrl = VCC - 2.1 V  
(Additional Supply Current  
Per TTL Input Pin)  
Switching Noise  
Generated from DC-DC Converter  
with recommended capacitors  
3.5 MHz  
dBm  
-93  
15  
Thermal Resistance jc  
°C/W  
Recommended PCB Configuration9  
4. During turn-on, the device requires an initial —Turn-on Current“.  
Once operational, Icc will drop to the specified levels.  
5. The DC-DC converter is guaranteed to start in 100 µs as long as  
the power supplies can provide a minimum of 100 mA —Turn-on  
Current“.  
Absolute Maximum Ratings6,7  
Parameter  
Absolute Maximum  
Max. Input Power  
0.05 GHz  
+27 dBm  
+34 dBm  
0.5 - 4.0 GHz  
VCC  
-0.5V ≤ VCC ≤ +6.0V  
-0.5V ≤ Vin ≤ VCC + 0.5V  
-40ºC to +85ºC  
Vin8  
Operating Temperature  
Storage Temperature  
-65ºC to +125ºC  
6. Exceeding any one or combination of these limits may  
cause permanent damage to this device.  
7. M/A-COM does not recommend sustained operation near  
these survivability limits.  
8. Standard CMOS TTL interface, latch-up will occur if logic  
signal is applied prior to power supply.  
9. Application Note S2083 is available on line at www.macom.com  
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
Digital Attenuator  
3 1 .5 d B , 6 -B it, T T L Driv er, DC -4 .0 G H z  
M AAT C C 0 0 1 1  
V 3  
Truth Table (Digital Attenuator)  
Handling Procedures  
C16 C8 C4 C2 C1 C0.  
Attenuation  
0
0
0
0
0
0
1
1
0
0
0
0
0
1
0
1
0
0
0
0
1
0
0
1
0
0
0
1
0
0
0
1
0
0
1
0
0
0
0
1
0
1
0
0
0
0
0
1
Loss, Reference  
0.5 dB  
Please observe the following precautions to avoid  
damage:  
1.0 dB  
Static Sensitivity  
2.0 dB  
Gallium Arsenide Integrated Circuits are sensitive  
to electrostatic discharge (ESD) and can be  
damaged by static electricity. Proper ESD control  
techniques should be used when handling these  
devices.  
4.0 dB  
8.0 dB  
16.0 dB  
31.5 dB  
0 = TTL Low; 1 = TTL High  
Typical Performance Curves  
VSW R @ Insertion Loss  
Insertion Loss  
Input  
Out put  
6.0  
5.0  
4.0  
3.0  
2.0  
2.2  
1.9  
1.6  
1.3  
1.0  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
Attenuation Error, 0.5 dB Bit  
Attenuation Error, 1 dB Bit  
0.4  
0.2  
0.4  
0.2  
0.0  
0.0  
-0.2  
-0.4  
-0.2  
-0.4  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
Digital Attenuator  
3 1 .5 d B , 6 -B it, T T L Driv er, DC -4 .0 G H z  
M AAT C C 0 0 1 1  
V 3  
Typical Performance Curves  
Attenuation Error, 4 dB Bit  
Attenuation Error, 2 dB Bit  
0.4  
0.4  
0.2  
0.2  
0.0  
0.0  
-0.2  
-0.4  
-0.2  
-0.4  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
Attenuation Error, 8 dB Bit  
Attenuation Error, 16 dB Bit  
0.8  
0.4  
0.8  
0.4  
0.0  
0.0  
-0.4  
-0.8  
-0.4  
-0.8  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Attenuation Error, Max. Attenuation  
VSW R, 0.5 dB Bit  
Input  
Out put  
1.8  
1.6  
1.4  
1.2  
1.0  
0.0  
-1.0  
-2.0  
1.0  
0
0
1000  
2000  
3000  
4000  
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
Digital Attenuator  
3 1 .5 d B , 6 -B it, T T L Driv er, DC -4 .0 G H z  
M AAT C C 0 0 1 1  
V 3  
Typical Performance Curves  
VSW R, 2 dB Bit  
VSW R, 1 dB Bit  
Input  
Output  
Input  
Output  
1.8  
1.6  
1.4  
1.2  
1.0  
1.8  
1.6  
1.4  
1.2  
1.0  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
VSW R, 4 dB Bit  
VSW R, 8 dB Bit  
Input  
Output  
Input  
Output  
1.8  
1.6  
1.4  
1.2  
1.0  
1.6  
1.4  
1.2  
1.0  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
VSW R, 16 dB Bit  
VSW R, Max. Attenuation  
Input  
Out put  
Input  
Out put  
1.8  
1.6  
1.4  
1.2  
1.6  
1.4  
1.2  
1.0  
1.0  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
Digital Attenuator  
3 1 .5 d B , 6 -B it, T T L Driv er, DC -4 .0 G H z  
M AAT C C 0 0 1 1  
V 3  
Typical Performance Curves  
Typical Attenuation Deviation vs. Temperature for 1 dB  
Bit  
Typical Attenuation Deviation vs. Temperature for 0.5  
dB Bit  
0.4  
0.25  
0.2  
0.3  
0.2  
0.1  
0
0.15  
0.1  
0.05  
0
-0.05  
-0.1  
-0.15  
-0.2  
-0.25  
-0.1  
-0.2  
-0.3  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
Typical Attenuation Deviation vs. Temperature for 2 dB  
Bit  
Typical Attenuation Deviation vs. Temperature for 4 dB  
Bit  
Cold  
Room  
Hot  
0.3  
0.25  
0.2  
0.3  
0.25  
0.2  
0.15  
0.1  
0.05  
0
-0.05  
-0.1  
-0.15  
-0.2  
-0.25  
0.15  
0.1  
0.05  
0
-0.05  
-0.1  
-0.15  
-0.2  
-0.25  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
Typical Attenuation Deviation vs. Temperature for 8 dB  
Bit  
Typical Attenuation Deviation vs. Temperature for 16  
dB Bit  
Cold  
Room  
Hot  
0.5  
0.4  
0.3  
Cold  
Room  
Hot  
0.6  
0.4  
0.2  
0
0.2  
0.1  
0
-0.1  
-0.2  
-0.3  
-0.4  
-0.5  
-0.6  
-0.2  
-0.4  
-0.6  
-0.8  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
6
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
Digital Attenuator  
3 1 .5 d B , 6 -B it, T T L Driv er, DC -4 .0 G H z  
M AAT C C 0 0 1 1  
V 3  
Typical Performance Curves  
Insertion Loss vs. Temperature  
Typical Attenuation Deviation vs. Temperature at  
Maximum Attenuation  
Cold  
Room  
Hot  
0.5  
0
5.0  
4.5  
4.0  
3.5  
3.0  
2.5  
2.0  
1.5  
-0.5  
-1  
-1.5  
-2  
-2.5  
0
1000  
2000  
3000  
4000  
0
1000  
2000  
3000  
4000  
Frequency (MHz)  
Frequency (MHz)  
CSP-1, Lead-Free 4 x 6 mm, 32-lead  
PQFN†  
Reference Application Note M538 for lead-free solder reflow  
recommendations.  
7
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  

相关型号:

MAATCC0011-TB

Digital Attenuator 31.5dB, 6-Bit, TTL Driver, DC-4.0 GHz
TE

MAATCC0011TR

Digital Attenuator 31.5dB, 6-Bit, TTL Driver, DC-4.0 GHz
TE

MAATCC0012

Digital Attenuator 30.0dB, 4-Bit, TTL Driver, DC-2.5 GHz
TE

MAATCC0012-TB

Digital Attenuator 30.0dB, 4-Bit, TTL Driver, DC-2.5 GHz
TE

MAATCC0012TR

Digital Attenuator 30.0dB, 4-Bit, TTL Driver, DC-2.5 GHz
TE

MAATCC0013

Voltage Variable Attenuator 824 - 960 MHz
TE

MAATCC0013-TB

Voltage Variable Attenuator 824 - 960 MHz
TE

MAATCC0013TR

Voltage Variable Attenuator 824 - 960 MHz
TE

MAATCC0014

Digital Attenuator 15.5dB, 5-Bit, TTL Driver, DC-3.5 GHz
TE

MAATCC0014-TB

Digital Attenuator 15.5dB, 5-Bit, TTL Driver, DC-3.5 GHz
TE

MAATCC0014TR

Digital Attenuator 15.5dB, 5-Bit, TTL Driver, DC-3.5 GHz
TE

MAATGM0001

Attenuator
TE