MAATSS0022SMB [TE]
Digital Attenuator, 5-Bit, 15.5 dB 500 - 2500 MHz; 数字衰减器, 5位, 15.5分贝500 - 2500兆赫型号: | MAATSS0022SMB |
厂家: | TE CONNECTIVITY |
描述: | Digital Attenuator, 5-Bit, 15.5 dB 500 - 2500 MHz |
文件: | 总4页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RoHS
Compliant
Digital Attenuator, 5-Bit, 15.5 dB
500 - 2500 MHz
MAATSS0022
V2
Features
Recommended Configuration
•
•
•
•
•
•
•
5 Bits, 0.5 dB Steps
Excellent Accuracy
RF1
Single Positive Control (+3 V to +5 V)
Lead-Free MSOP-10 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
0.1uF
VC1
8 dB
VC2
VC3
VC4
VC5
GND
GND
GND
4 dB
2 dB
Description
M/A-COM’s MAATSS0022 is a 0.5 dB step GaAs
MMIC digital attenuator with 15.5 dB attenuation
range in a lead-free MSOP-10 package. It requires
external DC blocking capacitors on the RF ports,
positive supply voltage and five individual bit control
voltages.
1 dB
0.5 dB
10K
0.1uF
Vs
RF2
The MAATSS0022 is particularly suited where high
attenuation accuracy, low insertion loss and low
intermodulation products are required.
Typical
applications include base stations, wireless data,
and wireless local loop gain level control circuits.
Pin Configuration
Pin No.
Function
VC1
Pin No.
Function
RF Port 2
Ground
1
2
3
4
5
6
7
The MAATSS0022 is fabricated using M/A-COM’s
GaAs 1.0 micron process. The process features full
chip passivation for increased performance and
reliability.
VC2
VC3
8
Ground
VC4
9
Ground
VC5
10
RF Port 1
Ordering Information 1
Part Number
MAATSS0022
Package
Bulk Packaging
3000 piece reel
Sample Test Board
Absolute Maximum Ratings 2,3
Parameter
Input Power
Absolute Maximum
+34 dBm
MAATSS0022TR-3000
MAATSS0022SMB
Voltage
+7 V
1. Reference Application Note M513 for reel size information.
Operating Temperature
Storage Temperature
-40°C to +85°C
-65°C to +125°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Digital Attenuator, 5-Bit, 15.5 dB
500 - 2500 MHz
MAATSS0022
V2
Electrical Specifications: TA = 25 °C, Z0 = 50 Ω, Vs = +5 V, VC = 0 V / 5 V
Parameter
Insertion Loss (reference state)
VSWR
Conditions
Frequency
Units
Min.
Typ.
Max.
0.5 - 0.8 GHz
0.8 - 1.8 GHz
1.8 - 2.2 GHz
2.1 GHz
dB
dB
dB
dB
dB
—
—
—
—
—
1.45
1.75
2.05
2.1
—
—
—
2.5
—
—
2.2 - 2.5 GHz
2.2
Any State
Any State
0.5 - 2.5 GHz
Ratio
—
1.6:1
—
0.5 - 0.8 GHz
0.8 - 1.8 GHz
1.8 - 2.2 GHz
2.1 GHz
dB
dB
dB
dB
dB
± (0.3 + 4% atten setting) Typical
± (0.3 + 3% atten setting) Typical
± (0.3 + 6% atten setting) Typical
± (0.3 + 6% atten setting) Min / Max
± (0.3 + 8% atten setting) Typical
Accuracy
2.2 - 2.5 GHz
Attenuation Range
—
0.5 - 2.5 GHz
dB
—
15.5
—
+3 V
+5 V
0.5 - 2.5 GHz
0.5 - 2.5 GHz
dBm
dBm
—
—
25
30
—
—
1 dB Compression Input Power
Two tones, Pin < +5 dBm / tone
IP3
+3 V
+5 V
0.5 - 2.5 GHz
0.5 - 2.5 GHz
dBm
dBm
—
—
36
46
—
—
Trise, Tfall
Ton, Toff
10/90% or 90/10% RF
50% CNTL to 90/10% RF
In Band
—
—
—
µS
µS
—
—
—
2
2
—
—
—
Transients
mV
62
+3 V
+5 V
—
—
µA
µA
—
—
5
5
40
40
Supply Current
+3 V
+5 V
—
—
µA
µA
—
—
—
—
100
100
Total Control Current
Truth Table 4
Operating Instructions
The MAATSS0022 is designed to operate with 5 V logic levels.
The difference between +3 V and +5 V operation is minimal for
small signal performance. IIP3, however, is a strong function
of voltage. +3 V is the minimum voltage at which the product
will reliably operate.
Control Inputs
VC5 VC4 VC3 VC2 VC1
Attenuation
(dB)
1
0
1
1
1
1
0
1
1
0
1
1
1
0
1
1
1
0
1
1
0
1
1
1
1
0
1
0
1
1
1
1
1
0
0
Reference
0.5 dB
1 dB
The MAATSS0022 requires a parallel interface that allows the
user to enter a 5 bit digital word. Each state increments the
attenuation by 0.5 dB giving a total range of 15.5 dB.
2 dB
The MAATSS0022 is not internally DC blocked. This means
that the device requires DC blocking capacitors on the RF1
and RF2 ports. M/A-COM recommends 0.1 uF to allow for the
entire frequency range to be utilized. Higher frequency
applications can use smaller value capacitors as DC blocks.
4 dB
8 dB
15.5 dB
4. 0 = 0.0 V ± 0.2 V, 1 = Vs = 5.0 V ± 0.2 V.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Digital Attenuator, 5-Bit, 15.5 dB
500 - 2500 MHz
MAATSS0022
V2
Typical Performance Curves @ +5 V
Attenuation, All Major States
Insertion Loss
25
3.0
0.5 dB
1.0 dB
2.0 dB
4.0 dB
8.0 dB
2.5
2.0
1.5
1.0
0.5
0.0
20
15.5 dB
15
10
5
+25°C
+85°C
-40°C
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.0
3.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Input Return Loss at Insertion Loss State
Output Return Loss at Insertion Loss State
0
0
-10
-20
-30
-10
-20
-30
+25°C
+85°C
-40°C
-40
-40
-50
+25°C
+85°C
-40°C
-50
0.0
0.5
1.0
1.5
2.0
2.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Input IP3 at Insertion Loss State
55
50
45
40
0.0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Digital Attenuator, 5-Bit, 15.5 dB
500 - 2500 MHz
MAATSS0022
V2
Lead-Free MSOP-10†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号:
©2020 ICPDF网 联系我们和版权申明