MADR-010410_15 [TE]
Module Driver 6-bit Serial/Parallel, Transmit/Receive;
| 型号： | MADR-010410_15 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Module Driver 6-bit Serial/Parallel, Transmit/Receive |
| 文件： | 总8页 (文件大小：618K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MADR-010410
Module Driver
6-bit Serial/Parallel, Transmit/Receive
Rev. V2
Features
Pin Configuration
CMOS or LVCMOS Control Logic
Negative output voltage for GaAs Gate Drive
6-bit Serial/Parallel Driver for Attenuator or Phase
Shifter Control
T/R Switch and Amplifier Controls
Low Power Dissipation
Pin No.
1
Function
B2
Pin No.
21
Function
NC
NC
NC
NC
GND
NC
P2
2
A2
22
3
B1
23
4
A1
24
Lead-Free 5mm PQFN-40LD Plastic Package
RoHS* Compliant and 260°C Reflow Compatible
5
VEE
25
6
VCC
26
7
S/P
27
Description
The MADR-010410 is a dedicated CMOS driver for
multifunction modules such as GaAs based
Transmit/Receive Modules. The driver translates
CMOS/LVCMOS input controls to negative gate
control voltages for GaAs FETs.
8
NC
28
P1
9
NC
29
L2
10
11
12
13
14
15
16
17
18
19
20
NC
30
L1
C1/SER IN
C2/CLK
C3/LE
C4
31
B7
32
A7
The driver includes a 6-bit serial/parallel interface
designed to drive digital attenuators and/or phase
shifters as well as functionality to switch between
transmit and receive channels allowing the ability to
enable/disable LNAs or PAs. High speed analog
CMOS technology is utilized to achieve low power
consumption at moderate to high speeds.
33
B6
34
A6
C5
35
B5
C6
36
A5
TR
37
B4
ENABLE
SER OUT
NC
38
A4
39
B3
Ordering Information1
40
A3
Part Number
Package
MADR-010410-000100
MADR-010410-TR0500
Bulk Packaging
500 piece reel
Handling Procedures
Please observe the following precautions to avoid
damage:
1. Reference Application Note M513 for reel size information.
Static Sensitivity
Silicon Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-010410
Module Driver
6-bit Serial/Parallel, Transmit/Receive
Rev. V2
Guaranteed Operating Ranges 2,3,4
Parameter
Unit
V
Min.
3.0
Typ.
5.0
Max.
5.5
Positive DC Supply Voltage
Negative DC Supply Voltage
Operating Temperature
V
-5.5
-40
-5.0
+25
-3.0
°C
+125
2. Unused logic inputs must be tied to either GND or VCC
.
3. All voltages are relative to GND.
4. 0.01 µF decoupling capacitors are required on the power supply lines.
DC Characteristics over Guaranteed Operating Range
Parameter
Test Conditions
Guaranteed High Input Voltage
Guaranteed Low Input Voltage
IOH = -250 µA
Unit
Min.
0.7xVCC
GND
—
Typ.
Max.
Input High Voltage
V
V
VCC
GND
-0.1
VEE + 0.1
—
VCC
Input Low Voltage
0.3xVCC
Output High Voltage (An or Bn)
Output Low Voltage (An or Bn)
DC Output Current—High (per Output)
DC Output Current—Low (per Output)
Output High for Serial Out
Output Low for Serial Out
V
—
—
—
1
IOL = 250 µA
V
—
VEE = -5.0V
mA
mA
V
-1
VEE = -5.0V
—
—
IOH = -100 µA
VCC - 0.2
GND
-1
—
VCC
0.2
—
1
IOL = 100 µA
V
—
Output Current High for Serial Out
Output Current Low for Serial Out
Quiescent Supply Current
Quiescent Supply Current
Input Leakage Current
VCC = 5.0V, VEE = -5.0V
VCC = 5.0V, VEE = -5.0V
VIN = GND or VCC, No Output Load
VIN = GND or VEE, No Output Load
VIN = GND or VCC
mA
mA
µA
µA
µA
Ω
—
—
—
—
0.1
5
—
0.1
5
-1
—
1
L,P Ports Open-Drain Output Resistance VEE = -5.0V or -3.0V, ISINK = 0.5mA
—
40
200
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-010410
Module Driver
6-bit Serial/Parallel, Transmit/Receive
Rev. V2
Absolute Maximum Ratings
Ln/Pn Output On Resistance
55
Parameter
Unit
Min
Max
50
45
40
35
30
25
20
DC Supply Voltage
Positive
V
-0.5
7.0
DC Supply Voltage
Negative
V
-7.0
0.5
DC Input Voltage
Operating Temperature
Storage Temperature
ESD Sensitivity
V
VCC – 0.5
7.0
125
150
—
°C
°C
kV
-55
-65
2
-60 -40 -20
0
20
40
60
80 100 120 140
Temperature (deg. C)
Function Diagram
SEROUT
LE
6 bits
6 bits
6 bits
CLK
SERIN
S/P
6 bits
6 bits
6-bit
Shift Register
A1-A6
B1-B6
6-bit
Latch
Voltage
Translators
Output
buffers
6 bits
6-bit
Input Buffer
C1-C6
S/P
Output
Buffers
A7, B7
Enable
TR
T/R
Logic
Voltage
Translators
L1,L2
P1,P2
Open-Drain
NMOS FETs
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-010410
Module Driver
6-bit Serial/Parallel, Transmit/Receive
Rev. V2
Functionality
Mode Truth Table
6-bit Serial/Parallel Driver
S/P
LE
Mode
The 6-bit serial/parallel driver consists of C1-C6
(shared inputs), S/P (mode control), A1 to A6 (in
phase outputs), B1 to B6 (complementary outputs),
and SerOut.
1
0
X
Serial
N/A
Direct Parallel
The serial control interface (SERIN, CLK, LE, SE-
ROUT) is compatible with SPI protocol. It is
activated when S/P is kept high. The 6-bit serial
word must be loaded with MSB first. When LE is
high, 6-bit data in the serial input register will be
transferred to complementary An and Bn outputs.
CLK will be masked to prevent data transition
during output loading. SEROUT is the SERIN
delayed by 6 clock cycles.
Parallel Mode Truth Table
OUTPUTS
INPUTs
C1-C6
A1-A6
B1-B6
0
1
VEE
GND
VEE
The parallel mode is enabled when S/P is set to low.
In the parallel mode, the outputs are controlled by
the parallel control inputs (C1 to C6) directly.
GND
T/R Control
T/R Logic Truth Table
The A7 and B7 outputs are designed to drive the
SP2T switch(es) in the T/R module. which switch the
T/R module between transmit and receive modes.
INPUTS
OUTPUTS
Enable
TR
1
A7
GND
VEE
B7
VEE
L1, L2
Hi Z
P1, P2
Hi Z
0
The combination of TR and Enable inputs will be
able to turn on/off the T/R module receive path LNAs
and transmit path PAs. Inside L and P outputs are
open-drain NMOS FETs. When they are turned on,
they will pull down the gate of the GaAs FETs in the
amplifiers to shut them down. See Figure 1 for the
application circuit.
0
0
GND
VEE
Hi Z
Hi Z
1
1
1
GND
VEE
Hi Z
Low
0
GND
Low
Hi Z
Where:
―Low‖ means that the NMOS FET is on (pulls the
gate to approximately VEE + 0.2V).
3 to 5k
―Hi Z‖ means that the open-drain NMOS FET is shut
down and shows a high impedance.
RF FET
L1,L2,P1,P2 FET
-0.7 to -0.9V
Driver Die
Vee
Vee
Figure 1. Application Circuit for T/R Amplifiers Control
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-010410
Module Driver
6-bit Serial/Parallel, Transmit/Receive
Rev. V2
Serial Interface Timing Diagram
tLS tLEW tLH
CLK
LE
C1
LSB
C6
MSB
C5
C2
SERIN
tCS
tCH
Serial Interface Timing Characteristics
Typical performance
Symbol
tCKH
tCKL
tCS
Parameter
Unit
ns
-40°C
50
+25°C
50
+125°C
Min. Serial Clock HIGH Period
Min. Serial Clock LOW Time
Min. Control Set-up Time
Min. Control Hold Time
Min. LE Set-up Time
50
50
20
20
20
20
20
ns
50
50
ns
20
20
tCH
ns
20
20
tLS
ns
20
20
tLEW
tLH
Min. LE Pulse Width
ns
20
20
Min. LE Hold Time
ns
20
20
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-010410
Module Driver
6-bit Serial/Parallel, Transmit/Receive
Rev. V2
Parallel Interface Characteristics Over Guaranteed Operating Range5
Typical performance
Symbol
TPLH
Parameter
Propagation Delay
Unit
ns
-40°C
+25°C
+125°C
22
22
6
24
24
7
28
28
8
TPHL
Propagation Delay
ns
TTLH
Output Transition Time (Rising Edge)
Output Transition Time (Falling Edge)
Delay Skew
ns
TTHL
ns
4
5
6
Tskew
ns
1
1
1
5. VCC = 3.0V, VEE = -3.0V, CL = 2 pF, input LOGIC1 = 3V, LOGIC0 = 0V, Trise, Tfall = 6 ns.
Switching Waveforms
Tf
Tr
LOGIC 1
90%
90%
1.3V
1.3V
INPUT C
VIN
10%
TPHL
10%
LOGIC 0
TPLH
TTLH
TTHL
OUTPUT
HIGH
OUTPUT B
90%
50%
90%
50%
VOUT
10%
10%
TSKEW
OUTPUT
LOW
OUTPUT A
TSKEW
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-010410
Module Driver
6-bit Serial/Parallel, Transmit/Receive
Rev. V2
Lead-Free, 5mm QFN-40LD†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Plating is 100% matte tin over copper.
Meets JEDEC moisture sensitivity level 3 requirements.
7
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-010410
Module Driver
6-bit Serial/Parallel, Transmit/Receive
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
8
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号：
©2020 ICPDF网 联系我们和版权申明