MAMUSM0008 [TE]
Digital Switched Delay Line, 1.8 - 2.4 GHz; 数字交换延迟线, 1.8 - 2.4 GHz的型号: | MAMUSM0008 |
厂家: | TE CONNECTIVITY |
描述: | Digital Switched Delay Line, 1.8 - 2.4 GHz |
文件: | 总6页 (文件大小:733K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Digital Switched Delay Line,
1.8 - 2.4 GHz
V 1.00
Features
BGA Package
n
n
n
n
n
n
750 pS Dynamic Range, 50 pS Step Size
BGA Package
Parallel Control Interface
Positive Control Logic
Cascadable
No off chip components required
Description
The M/A-COM MAMUSM0008 is a 0 to 750 pS variable
delay line controlled by 4 complementary bit pairs. It
provides the user with 50 pS delay step sizes for use in
standard wireless applications. The MAMUSM0008 is
particularly useful in providing time delay in the
cancellation loops of feed-forward amplifiers.
Block Diagram
Absolute Maximum Ratings 1
Parameter
Absolute Maximum
Control Voltage
8.5V
Maximum RF Input Power
Operating Temperature
Storage Temperature
+30 dBm
50 ps
100 ps
200 ps
400 ps
-40°C to +85°C
-55°C to +125°C
1. TA = +25°C (unless otherwise specified)
Electrical Specifications: TA = 25°C, Z0 = 50W
Parameter
Frequency
Conditions
Units
—
Min.
Typ.
Max.
—
1.8 - 2.4 GHz
—
0
—
—
50
—
20
20
—
—
38
3
Delay Line Control Range
Delay Line Control Step Size
Delay Step Accuracy
Output Return Loss
Input Return Loss
Input P1dB
—
pS
750
—
—
pS
—
—
15
15
27
5
± 5 pS +5% of step size in pS
—
—
—
dB
—
—
dB
—
—
dBm
dB
—
Insertion Loss
—
8
Output IP3
PIN = 0 dBm, 5 MHz Spacing
dBm
V
36
2.7
2
—
Control Voltage
—
—
8.5
50
100
Control Current
µA
20
72
Switching Speed
3V Control
nS
—
(50% TTL to 90% RF)
Digital Switched Delay Line, 1.8 - 2.4 GHz
Typical Performance Curves
MAMUSM0008
V 1.00
OIP3 vs. Frequency
Delay vs. Frequency
50.0
40.0
30.0
20.0
10.0
0.0
1.6E-09
1.5E-09
1.4E-09
1.3E-09
1.2E-09
1.1E-09
1.0E-09
9.0E-10
8.0E-10
7.0E-10
6.0E-10
1.8
2.0
2.2
2.4
1.8
1.9
2.0
2.2
2.3
2.4
Frequency (GHz)
Frequency (GHz)
Input Return Loss vs. Frequency
Phase vs. Frequency
1.0
0.8
-10
-15
-20
-25
-30
-35
-40
0.6
0.4
0.2
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
1.8
2.0
2.1
2.3
2.4
1.8
2.0
2.1
2.3
2.4
Frequency (GHz)
Frequency (GHz)
Output Return Loss vs. Frequency
Insertion Loss vs. Frequency
-10
-15
-20
-25
-30
-35
-40
-5.0
-5.5
-6.0
-6.5
-7.0
-7.5
-8.0
1.8
2.0
2.1
2.3
2.4
1.80
1.95
2.10
2.25
2.40
Frequency (GHz)
Frequency (GHz)
2
Specifications subject to change without notice.
n North America: Tel. (800) 366-2266
n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
Digital Switched Delay Line, 1.8 - 2.4 GHz
Typical Performance Curves
MAMUSM0008
V 1.00
Insertion Loss vs. Frequency over
Temperature at 0 pS State
Insertion Loss vs. Frequency over
Temperature at 750 pS State
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-4.0
-5.0
-6.0
-7.0
-8.0
-5.0
-6.0
-7.0
-8.0
-9.0
-10.0
1.8
2.0
2.1
2.3
2.4
1.8
2.0
2.1
2.3
2.4
Frequency (GHz)
Frequency (GHz)
Output Return Loss vs. Frequency
(+85°C)
Input Return Loss vs. Frequency
(+85°C)
-10
-15
-20
-25
-30
-35
-40
-10
-15
-20
-25
-30
-35
-40
1.8
2.0
2.1
2.3
2.4
1.80
1.95
2.10
2.25
2.40
Frequency (GHz)
Frequency (GHz)
3
Specifications subject to change without notice.
n North America: Tel. (800) 366-2266
n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
Digital Switched Delay Line, 1.8 - 2.4 GHz
MAMUSM0008
V 1.00
Pin-Out Diagram
18 17 16 15 14 13 12 11 10
9
8
7
6
8
4
3
2
1
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
RF_
OUT
GND
GND
GND
GND
GND
GND
GND
GND
GND
A
B
C
D
E
F
GND
GND
GND
GND
GND
GND
GND
GND
GND
CTL
_C2
GND
CTL
_D1
GND
CTL
_D2
GND
GND
CTL
_C1
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
G
H
J
K
L
M
N
P
R
T
CTL
_B2
CTL
_B1
GND
GND
CTL
_A2
CTL
_A1
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
U
V
GND
GND
GND
RF_
IN
4
Specifications subject to change without notice.
n North America: Tel. (800) 366-2266
n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
Digital Switched Delay Line, 1.8 - 2.4 GHz
Control
MAMUSM0008
V 1.00
Delay Line
50 ps
Associated Letter
Herein is described the control method for the
MAMUSM0008 Digital Delay Line. The information will
be aimed specifically at the use of the delay line mounted
on a M/A-COM test sample board. The same theory and
control scheme can be applied directly to the component by
itself.
A
B
C
D
100 ps
200 ps
400 ps
This product allows the insertion of a variable electrical
delay between its two ports. The control consists of four
complimentary bit pairs (8 bits total). Each pair is given a
different letter, as shown in the table to the right:
Note that each delay line has a pair named as follows:
CTL_A1 and CTL_A2, CTL_B1 and CTL_B2,
CTL_C1 and CTL_C2, CTL_D1 and CTL_D2.
D2 D1 C2 C1 B2 B1 A2 A1
10101010
hex
AA
A9
A6
A5
9A
99
96
95
6A
69
66
65
5A
59
56
55
decimal
170
169
166
165
154
153
150
149
106
105
102
101
90
state
0
ps delay
0
10101001
1
50
10100110
2
100
150
200
250
300
350
40
10100101
3
10011010
4
10011001
5
10010110
6
10010101
7
01101010
8
01101001
9
450
500
550
600
650
700
750
01100110
10
11
12
13
14
15
01100101
01011010
01011001
89
01010110
86
01010101
85
The above table illustrates the method of controlling the bits for the desired delay in pico seconds. The hex and decimal
representations are included for programming purposes. “1” denotes 5 volts and “0” denotes 0 volts. A given delay line is set
when bits 2 and bit 1 are set to 0 and 1 respectively. The given delay line is bypassed when the bits 2 and 1 are set to 1 and 0
respectively.
The “GND” pin on the test board header must be connected to the DC supply ground.
5
Specifications subject to change without notice.
n North America: Tel. (800) 366-2266
n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
Digital Switched Delay Line, 1.8 - 2.4 GHz
Measurement
MAMUSM0008
V 1.00
Ordering Information
The simplest way to measure the delay steps is with a vec-
tor network analyzer (VNA). For taking S-Parameter
data, perform a standard calibration and measure the pa-
rameters for the given state.
Part Number
Package
MAMUSM0008
Bulk Packaging
MAMUSM0008TR
MAMUSM0008-TB
Tape and Reel (1K Reel)
Below is a description of how to see the delay accurately.
M/A-COM recommends the following measurement pro-
cedure:
Units Mounted on Test Board
Set the delay line to the reference or insertion delay state.
With the two ports of the VNA connected to the “in” and
“out” on the test board, measuring S21, set displayà
memory, and display data/memory. This will normalize
your data to the reference insertion state.
Next, switch the measurement format to phase. This
should be flat and zero due to the normalization. Switch
in the first delay line. (50ps). The display will not remain
on zero, but will have an offset. Under the Scale/
Reference menu, select electrical delay, and dial that up
until the data reads zero again, across the band of interest.
That electrical delay will be 50ps.
Continue to switch in the delay lines, dialing in more
delay each time.
Other methods are possible, but this is the most straight-
forward approach. We do not recommend using the
‘delay’ format in the VNA. The VNA’s method of
measuring this results in a noisy response, and is less
accurate than the method outlined above.
Upon request, M/A-COM can provide a test control board
to ease stepping through the states.
6
Specifications subject to change without notice.
n North America: Tel. (800) 366-2266
n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
相关型号:
©2020 ICPDF网 联系我们和版权申明