MAPDCC0017-TR [TE]
Low Cost Six-Way SMT Power Divider 824 - 960 MHz; 低成本六路SMT功率分配器824 - 960兆赫
| 型号： | MAPDCC0017-TR |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Low Cost Six-Way SMT Power Divider 824 - 960 MHz |
| 文件： | 总3页 (文件大小：84K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MAPDCC0017
Low Cost Six-Way SMT Power Divider
824 - 960 MHz
Rev. V2
Features
Functional Diagram1
•
•
•
•
•
•
•
•
•
•
•
•
Small Size, Low Profile
Superior Repeatability (Lot-to-lot Variation)
Industry Standard SOW-16 SMT Plastic Package
Typical Isolation: 25 dB
Typical Insertion Loss: 0.3 dB
Low Cost
1 Watt Power Handling
Lead-Free SOW-16 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of DS56-0001
Description
M/A-COM’s MAPDCC0017 is an IC-based mono-
lithic power divider in a low cost SOW-16 plastic
package. This 6-way power divider is ideally suited
for applications where PCB real estate is at a pre-
mium and part count reduction and cost are critical.
Typical applications include base station switching
networks and other cellular equipment, including
subscriber units. Available in tape and reel.
1. Pins 2, 4, 6, 8, 9, 10, 11, 13, and 15 must be DC and RF
grounded.
Pin Configuration
Pin No.
Function
RF3 (OUT)
GND
Pin No.
Function
GND
1
2
3
4
5
6
7
8
9
The MAPDCC0017 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and reli-
ability.
10
11
12
13
14
15
16
GND
RF2 (OUT)
GND
GND
RF6 (OUT)
GND
RF1 (OUT)
GND
RF5 (OUT)
GND
RF IN
Ordering Information
GND
RF4 (OUT)
Part Number
Package
MAPDCC0017
Bulk Packaging
MAPDCC0017-TR
MAPDCC0017-TB
1000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAPDCC0017
Low Cost Six-Way SMT Power Divider
824 - 960 MHz
Rev. V2
Electrical Specifications: TA = 25°C, Z0 = 50Ω
Parameter
Units
dB
Min
—
Typ
1.3
Max
Insertion Loss Above 7.8 dB
1.5
—
Isolation
dB
20
25
VSWR
—
—
1.4:1
0.2
1.6:1
0.5
Amplitude Balance
dB
—
Phase Balance
Deg.
—
6
8
Absolute Maximum Ratings 2,3
Parameter
Input Power4
Absolute Maximum
1 W CW
Operating Temperature
Storage Temperature
-40°C to +85°C
-65°C to 150°C
Recommended PCB Configuration
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. With internal load dissipation of 0.125 W maximum.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAPDCC0017
Low Cost Six-Way SMT Power Divider
824 - 960 MHz
Rev. V2
Typical Performance Curves
Insertion Loss vs. Frequency
Isolation vs. Frequency
VSWR vs. Frequency
Lead-Free, SOW-16†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明