MAPS-010163-TR0500 [TE]
Digital Phase Shifter;型号: | MAPS-010163-TR0500 |
厂家: | TE CONNECTIVITY |
描述: | Digital Phase Shifter 射频 微波 |
文件: | 总8页 (文件大小:1189K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MAPS-010163
Digital Phase Shifter
6-Bit, 1.4 - 2.4 GHz
Rev. V5
Features
Functional Schematic
6 Bit Digital Phase Shifter
360° Coverage with LSB = 5.6°
Integral CMOS Driver
Serial or Parallel Control
Low DC Power Consumption
Minimal Attenuation Variation over Phase Shift
Range
50 Ω Impedance
EAR99
Lead-Free 4 mm 24-Lead PQFN Package
RoHS* Compliant
VCC
(+5 V)
VEE
(-5 V)
24 23 22 21 20 19
0.1 µF
0.1 µF
1
2
3
4
5
6
18
17
16
15
14
13
6-Bit
Phase Shifter
P/S
SEROUT
GND
GND
GND
RFIN
GND
GND
See
Detail
RFOUT
GND
7
8
9 10 11 12
Description
Phase Shifter Detail
The MAPS-010163 is a GaAs pHEMT 6-bit digital
phase shifter with an integral CMOS driver in a
4 mm PQFN plastic surface mount package. Step
size is 5.6° providing phase shift from 0° to 360° in
5.6° steps. This design has been optimized to
minimize variation in attenuation over the phase shift
range.
RFIN
RFOUT
-5.6 deg.
-112 deg.
-22.5 deg.
-45 deg.
-90 deg.
-180 deg.
Pin Configuration2
Pin No.
Function
VEE
Pin No.
13
Function
GND
The MAPS-010163 is ideally suited for use where
high phase accuracy with minimum loss variation
over the phase shift range are required. The 4 mm
PQFN package provides a smaller footprint than is
typically available for a digital phase shifter with an
internal driver. Typical applications include
communications antennas and phased array radars.
1
2
P/S
14
RFOUT
GND
3
GND
GND
RFIN
15
4
16
GND
5
17
SEROUT
VCC
Ordering Information1
6
GND
GND
GND
GND
GND
GND
GND
18
Part Number
Package
7
19
D6
MAPS-010163-TR0500
MAPS-010163-001SMB
500 piece reel
8
20
D5
Sample Test Board
9
21
D4
1. Reference Application Note M513 for reel size information.
10
11
12
22
D3 or LE
D2 or CLK
D1 or SERIN
23
24
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPS-010163
Digital Phase Shifter
6-Bit, 1.4 - 2.4 GHz
Rev. V5
Electrical Specifications:
Freq. = 1.4 - 2.4 GHz, TA = 25°C, Z0 = 50 Ω, VCC = +5.0 V, VEE = -5.0 V
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Operating Power 3
1.4 - 2.4 GHz
dBm
—
—
+25
Insertion Loss
(Any Phase State)
Any Phase State
dB
dB
—
—
5
6
Attenuation Variation
RMS Attenuation Error 4
RMS Phase Error 4
Across All Phase States
± 0.8
—
All Values Relative to Insertion Loss at
Reference Phase
dB
—
—
0.4
3
—
—
All Values Relative to Reference Phase
deg
5.6 Degree Bit
11.2 Degree Bit
22.5 Degree Bit
45 Degree Bit
90 Degree Bit
180 Degree Bit
Sum of All Bits
± 0.5
± 0.3
± 2
± 2.5
± 3
Phase Accuracy
Relative to Reference Loss State
deg
—
—
± 4
± 4
RF Input
RF Output
1.5:1
1.5:1
VSWR
Ratio
—
—
1 dB Compression
Input IP3
Reference State
dBm
dBm
—
—
25
40
—
—
Two-tone inputs up to +5 dBm
TRISE, TFALL
10% to 90% RF, 90% to 10% RF
ns
V
—
50
—
VCC
VEE
—
—
3.0
-5.5
—
-5.0
5.5
-3.0
VIL
VIH
LOW-level input voltage
HIGH-level input voltage
0.0
0.7 x VCC
0.3 x VCC
VCC
V
µA
V
—
1
lIN (Input Control Current)
VIN = VCC or GND
—
—
VOH
VOL
For serial out; IOH = -100 µA
For serial out; IOL = 100 µA
VCC - 0.2
—
0.2
—
—
ICC
VCONTROL = VCC or GND
µA
—
—
2
(Quiescent Supply Current)
VEE min to max
VIN = VIL or VIH
IEE
mA
-1.0
-0.1
—
3. Maximum operating power is the maximum power where the specifications are guaranteed.
4. RMS is calculated across all 63 amplitude or phase states relative to the amplitude or phase in the 0° phase state at a given frequency.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPS-010163
Digital Phase Shifter
6-Bit, 1.4 - 2.4 GHz
Rev. V5
Absolute Maximum Ratings5,6
Sample Board Header Pin Labels
Parameter
Absolute Maximum
Input Power
1.4 - 2.4 GHz
+27 dBm
VCC
VEE
-0.5 V ≤ VCC ≤ +7.0 V
-7.0 V ≤ VEE ≤ +0.5 V
D1-D6, P/S, LE, CLK or
SER IN
-0.5 V ≤ VIN ≤ VCC + 0.5 V
SER OUT
-0.5 V ≤ VOUT ≤ VCC + 0.5 V
-40ºC to +85ºC
Operating Temperature
Storage Temperature
-65ºC to +150ºC
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. MACOM does not recommend sustained operation near these
survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide and Silicon Integrated Circuits
are sensitive to electrostatic discharge (ESD) and
can be damaged by static electricity. Proper ESD
control techniques should be used when handling
these devices.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPS-010163
Digital Phase Shifter
6-Bit, 1.4 - 2.4 GHz
Rev. V5
Typical Performance Curves
RFIN Return Loss vs. Frequency (All States)
RFOUT Return Loss vs. Frequency (All States)
0
0
-10
-20
-30
-40
-50
-10
-20
-30
-40
-50
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
Frequency (GHz)
Frequency (GHz)
Mean RMS Amplitude Error vs. Frequency
Mean RMS Phase Error vs. Frequency
10
1.0
8
6
0.8
0.6
0.4
0.2
0.0
4
2
0
-2
-4
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
Frequency (GHz)
Frequency (GHz)
Phase Error (degrees) vs. State
Amplitude Error (dB) vs. State
2.0
8
6
1.4 GHz
1.9 GHz
2.4 GHz
1.5
1.0
4
0.5
2
0.0
0
-0.5
-1.0
-1.5
-2.0
-2
-4
-6
-8
1.4 GHz
1.9 GHz
2.4 GHz
0
45
90
135
180
225
270
315
360
0
45
90
135
180
225
270
315
360
State
State
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPS-010163
Digital Phase Shifter
6-Bit, 1.4 - 2.4 GHz
Rev. V5
Typical Performance Curves
Amplitude Variation vs. Phase State
Phase Shift vs. Frequency (All States)
0
-1
-2
-3
-4
-5
-6
-45
-90
-135
-180
-225
-270
-315
-360
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
Frequency (GHz)
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
Frequency (GHz)
5.6º
118.1º
123.7º
129.3º
135º
140.6º
146.2º
151.8º
157.5º
163.1º
168.7º
174.3º
180º
185.6º
191.2º
196.8º
202.5º
208.1º
213.7º
219.3º
225º
230.6º
236.2º
343.1º
348.7º
354.3º
11.2º
16.8º
22.5º
28.1º
33.7º
39.3º
45º
50.6º
56.2º
61.8º
67.5º
73.1º
78.7º
84.3º
90º
241.8º
247.5º
253.1º
258.7º
264.3º
270º
275.6º
281.2º
286.8º
292.5º
298.1º
303.7º
309.3º
315º
95.6º
320.6º
326.2º
331.8º
337.5º
101.2º
106.8º
112.5º
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPS-010163
Digital Phase Shifter
6-Bit, 1.4 - 2.4 GHz
Rev. V5
Modes of Operation:
Serial and Direct Parallel
Mode Truth Table
Serial Mode
The serial control interface (SERIN, CLK, LE,
SEROUT) is compatible with the SPI protocol. SPI
mode is activated when P/S is kept high. The 6-bit
serial word must be loaded with the MSB first. After
shifting in the 6 bit word, a rising edge on LE will set
the phase shifter to the desired state. While LE is
high the CLK is masked to protect the data while
implementing the change. SEROUT is SERIN
delayed by 6 clock cycles.
P/S
LE
Mode
1
0
X
Serial
N/A
Direct Parallel
Truth Table (Digital Phase Shifter) 7
D6 D5 D4 D3 D2 D1
Phase Shift
When P/S is low, the serial control interface is
disabled. When P/S is set high, Pins 22, 23, and 24
have the LE, CLK, and SER IN function.
0
0
0
0
0
0
1
1
0
0
0
0
0
1
0
1
0
0
0
0
1
0
0
1
0
0
0
1
0
0
0
1
0
0
1
0
0
0
0
1
0
1
0
0
0
0
0
1
Reference Phase
5.6°
11.2°
22.5°
45°
In serial mode operation, the outputs will stay
constant while LE is kept low.
90°
Direct Parallel Mode
180°
354.4°
The parallel mode is enabled when P/S is set low. In
the direct parallel mode, the phase shifter is
controlled by the parallel control inputs directly.
When P/S is set low, Pins 22, 23, and 24 have the
D3, D2, and D1 function.
7. 0 = CMOS Low; 1 = CMOS High, X is CMOS Low or High
Serial Interface Timing Characteristics
Typical Performance
Symbol
Parameter
Units
-40°C
100
20
+25°C
+85°C
100
20
tSCK
tCS
Min. Serial Clock Period
Min. Control Set-up Time
Min. Control Hold Time
100
20
ns
ns
ns
ns
ns
ns
ns
tCH
20
20
20
tLS
Min. LE Set-up Time
10
10
10
tLEW
tLH
Min. LE Pulse Width
10
10
10
Min. Serial Clock Hold Time from LE
Min. LE Pulse Spacing
10
10
10
tLES
630
630
630
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPS-010163
Digital Phase Shifter
6-Bit, 1.4 - 2.4 GHz
Rev. V5
Functionality
Modes of Operation: Serial and Direct Parallel
Serial Input Interface Timing Diagram
tLS tLEW tLH
SERIAL
CLK
LE
tLES
D5
MSB
D0
LSB
CONTROL
WORD
D4
D1
tCS
tCH
Lead Free 4 mm 24-Lead PQFN †
† Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
7
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPS-010163
Digital Phase Shifter
6-Bit, 1.4 - 2.4 GHz
Rev. V5
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
8
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号:
©2020 ICPDF网 联系我们和版权申明