MASW-000834_13560T [TE]
HMICTM PIN Diode SPDT 50 Watt Switch; HMICTM PIN二极管SPDT 50瓦开关
| 型号： | MASW-000834_13560T |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | HMICTM PIN Diode SPDT 50 Watt Switch |
| 文件： | 总13页 (文件大小：243K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Features
Functional Diagram (TOP VIEW)
• Exceptional Broadband Performance, 0.05 - 6.0 GHz
• Low Loss: TX = 0.33 dB @ 2010 MHz, 5V / 20mA
• Low Loss: TX = 0.38 dB @ 3.5 GHz, 5V / 20mA
• High Isolation: Rx = 44dB @ 2010 MHz, 20mA / 5V
• High Isolation: Rx = 36dB @ 3.5 GHz, 20mA / 5V
• High TX RF Input Power = 50 W C.W. @ 2010MHz
• High Tx RF Input Peak Power > 1000 W
(Pin 16)
N/C GND
TX
GND
(Pin 1)
GND
N/C
• Suitable for Very High Power TD-SCDMA & WiMAX
ANT
GND
N/C
N/C
N/C
DC2
Applications
• Surface Mount 4mm PQFN Package, RoHS* Compliant
Description and Applications
The MASW-000834-13560T is a SPDT Broadband, high
linearity, common anode, PIN diode T/R switch for 0.05 -
6.0 GHz applications, including WiMAX & WiFi. The
device is provided in industry standard 4mm PQFN plastic
packaging. This device incorporates a PIN diode die
fabricated with M/A-COM Technology Solutions patented
Silicon-Glass HMICTM process. This chip features two
silicon pedestals embedded in a low loss, low dispersion
glass. The diodes are formed on the top of each pedestal.
The topside is fully encapsulated with silicon nitride and
has an additional polymer passivation layer. These
polymer protective coatings prevent damage and
contamination during handling and assembly.
N/C GND RX
GND
Pin Configuration:
(Center Metal Area is RF, D.C., and Thermal Ground)
Pin
1
Function
GND
ANT
Pin
9
Function
DC2
N/C
2
10
11
12
13
14
15
16
This compact 4mm PQFN package, SPDT switch offers
wideband 0.05 - 6.0 GHz performance with excellent
isolation to loss ratio for both TX and RX states. The PIN
diode provides 50 W typical C.W. power handling and 65
3
GND
N/C
N/C
4
N/C
5
N/C
GND
TX
dBm IIP3 at 2010 MHz
performance.
for
maximum
switch
6
GND
RX
7
GND
N/C
Absolute Maximum Ratings 1,2
@ TA = +25 °C (unless otherwise specified)
8
GND
Parameter
Forward Current
Absolute Maximum
Ordering Information
| 100 mA |
| -200 V |
Reverse Voltage ( RF & D.C. )
Operating Temperature
Storage Temperature
Junction Temperature
Part Number
Package
-40 °C to +85 °C
-55 °C to +150 °C
+175 °C
MASW-000834-13560T
MASW-000834-001SMB
Tape and Reel
Sample Board
3
Sample Board with recommended
external Driver & MASW-000834-
13560T Switch
50W (47 dBm)
@ 2010MHz
TX Incident C.W. Power
TX Peak Incident Power
MADR-008851-0001TB
>300 W, 5us, 1% duty
Static Sensitivity
1. Exceeding these limits may cause permanent damage.
2. M/A-COM Technology Solutions does not recommend sustained operation near
these survivability limits.
3. Baseplate Temperature must be controlled to a constant +25°C. See page 7 for
derating curve.
These devices are rated Class 1B Human Body.
Proper ESD control techniques should be used
when handling these devices.
1
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 20mA / 5V, Z0 = 50 Ω
Parameter
Symbol
20mA / 5V Conditions
Units
Min.
Typ. Max.
F = 900 MHz
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
dB
dB
dB
dB
—
—
0.34
0.26
52.1
27.1
0.56
0.445
—
TX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
RX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
45.8
21.7
TX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Isolation, ANT To TX
F = 1800 MHz
—
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
dB
dB
dB
dB
—
—
0.40
0.32
48.9
21.4
0.72
0.49
—
Tx
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Insertion Loss, TX
Rx
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Isolation, ANT To RX
43.7
18.4
TX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Isolation, ANT To TX
F = 2010 MHz
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
dB
dB
dB
dB
dB
—
—
0.42
0.33
44.6
19.9
32.1
0.75
0.5
—
TX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
RX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
43.2
17.7
—
TX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
—
TX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
—
RX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Input Return Loss, RX
dB
—
24.2
—
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 20mA / 5V, Z0 = 50 Ω
Parameter
Symbol
20mA / 5V Conditions
Units
Min.
Typ.
Max.
F = 2.3-2.7 GHz
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
dB
dB
dB
—
—
0.46
0.35
41.2
0.84
0.525
—
TX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
RX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
40.2
TX
ISO
TX
RL
RX
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Isolation, ANT To TX
Input Return Loss, TX
dB
dB
dB
16.2
—
18.6
30.5
22.9
—
—
—
Input Return Loss, RX
F = 3.3-3.8 GHz
—
RL
RX
IL
TX
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
dB
dB
dB
dB
dB
dB
—
—
0.56
0.38
35.9
16.1
27.4
21.9
1.0
0.575
—
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
33.7
13.6
—
—
—
Input Return Loss, RX
—
—
F = 4.9-5.9 GHz
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
dB
dB
dB
—
—
—
0.78
0.52
26.4
—
—
—
TX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
RX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
TX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
dB
dB
dB
—
—
—
11.8
20.3
24.2
—
—
TX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
RX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
—
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω
Parameter
F = 900 MHz
Symbol
50mA / 25V Conditions
Units
Min.
Typ.
Max.
RX
IL
TX
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
dB
dB
dB
dB
—
—
—
—
0.27
0.22
53.3
27.4
—
—
—
—
IL
RX
ISO
TX
Isolation, ANT To TX
F = 1800 MHz
ISO
RX
IL
TX
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
dB
dB
dB
dB
—
—
—
—
0.32
0.27
50.2
21.6
—
—
—
—
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
F = 2010 MHz
IL
RX
ISO
TX
ISO
RX
IL
TX
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
Insertion Loss, TX
dB
dB
dB
dB
dB
dB
—
—
—
—
—
—
0.34
0.28
45.5
20.1
33.1
24.1
—
—
—
—
—
—
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω
Parameter
Symbol
50mA / 25V Conditions
Units Min.
Typ. Max.
F = 2.3-2.7 GHz
RX
IL
TX
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
Insertion Loss, TX
dB
dB
dB
dB
dB
dB
—
—
—
—
—
—
0.38
0.30
41.8
18.7
31.3
22.8
—
—
—
—
—
—
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
F = 3.3-3.8 GHz
RX
IL
TX
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
dB
dB
dB
dB
dB
dB
—
—
—
—
—
—
0.47
0.33
36.2
16.2
28.0
21.8
—
—
—
—
—
—
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
Input Return Loss, RX
F = 4.9-5.9 GHz
RX
IL
TX
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
Insertion Loss, RX
dB
dB
dB
dB
dB
dB
—
—
—
—
—
—
0.72
0.48
26.6
11.8
20.5
24.2
—
—
—
—
—
—
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω
Parameter
Symbol
50mA / 25V Conditions
Units
Min.
Typ.
Max.
TX
P1dB
TX
2Fo
TX
3Fo
TX
IIP3
TX Input P1dB 3
2010 MHz, TX to Antenna
dBm
—
>45.5
—
TX 2nd Harmonic
TX 3rd Harmonic
2010 MHz, Pin = + 30 dBm
2010 MHz, Pin = + 30 dBm
dBc
dBc
dBm
—
—
—
—
80
95
—
—
—
—
TX Input Third Order
Intercept Point
TX C.W. Input Power 3
Pi= +10dBm, F1 = 2010 MHz, F2 = 2020 MHz
F = 2010 MHz
>64
TX
Pinc
dBm
W
47
50
RX
Pinc
dBm
W
41.5
14
RX C.W. Input Power
F = 2010 MHz
—
—
—
—
TX RF Switching
Speed
F = 2010 MHz ( 10-90% RF Voltage)
1MHz Rep Rate in Modulating Mode
tRF
ns
200
Parameter
Symbol
50mA / 25V Conditions
Units
Min.
Typ.
Max.
TX
P1dB
TX
2Fo
TX
3Fo
TX
TX Input P1dB
3.5 GHz, TX to Antenna
dBm
—
>45
—
TX 2nd Harmonic
TX 3rd Harmonic
3.5 GHz, Pin = + 30 dBm
3.5 GHz, Pin = + 30 dBm
dBc
dBc
dBm
—
—
—
88
—
—
—
105
>64
TX Input Third Order
Intercept Point
Pi= +10dBm, F1 = 3.500 GHz, F2 = 3.510 GHz
IIP3
RX
Pinc
dBm
W
40.5
11
RX C.W. Input Power
F = 3.5 GHz
—
—
—
—
TX RF Switching
Speed
F = 3.5 GHz ( 10-90% RF Voltage)
1MHz Rep Rate in Modulating Mode
tRF
ns
200
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω
Note that this part must be held to a constant baseplate temperature to achieve the power handling results
specified above. Adding a heatsink to the baseplate will improve performance to values greater than shown
here. The increase in maximum input power from using a heatsink depends on the specific heatsink design.
With a sample board mounted onto a heatsink of dimensions and fins shown below, this switch can handle up
to 35 Watts C.W. of incident power.
7
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
TX Performance Curves at +25°C, Characteristic Impedance, Z0 = 50 Ω
8
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
RX Performance Curves at +25°C, Characteristic Impedance, Z0 = 50 Ω
9
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Bias Diagrams & Tables
(Pin 16)
(Pin 16)
N/C GND
TX
GND
N/C GND
TX
GND
+
(Pin 1)
(Pin 1)
5V / 25V
20mA / 50mA
GND
N/C
GND
N/C
-
ANT
GND
N/C
N/C
N/C
DC2
ANT
GND
N/C
N/C
N/C
-
5V / 25V
20mA / 50mA
20mA / 50mA
+
-
5V / 25V
+
DC2
N/C GND RX
GND
N/C GND RX
GND
Bias Table 1
TX
RX
DC2
ANT
Pin 14
Pin 7
Pin 9
Pin 2
TX-ANT Insertion Loss
RX-ANT Isolation
-20 mA
+5V, 0 mA
-20 mA
-20 mA
0V
RX-ANT Insertion Loss
TX-ANT Isolation
+5V, 0 mA
+5V, 0 mA
0V
Bias Table 2
TX
RX
DC2
ANT
Pin 14
Pin 7
Pin 9
Pin 2
TX-ANT Insertion Loss
RX-ANT Isolation
-50 mA
+25V, 0 mA
-50 mA
-50 mA
0V
0V
RX-ANT Insertion Loss
TX-ANT Isolation
+25V, 0 mA
+25V, 0 mA
*Note - Diode Based Products require different minimum reverse bias voltages depending on the
frequency and incident power levels. More details can be found on page 11 of this datasheet.
10
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
MASW-000834 Minimum Required Reverse Bias Voltage
Minimum reverse bias voltage on a PIN diode based product varies with frequency of operation and inci-
dent power levels. As a rule of thumb, a designer can always use the magnitude of the peak RF voltage or
empirically locate lower bias values than the peak RF voltage magnitude. However, it has been shown that
lower DC voltages can be used depending on the RF environment in which a diode is placed. In the plot
below, the minimum required reverse voltage vs. frequency is shown for an incident RF power of 50 Watts.
This trend line will shift lower if the incident RF power is decreased. The biasing values have not been
verified through measurement at M/A-COM Technology Solutions. As a result, please use the data below
as a guide only for biasing requirements as this data is based solely on generic PIN diode equations.4
Please be cautious in that lower reverse bias levels can degrade isolation and distortion in a PIN diode
based product.
Reverse Bias Required vs. Frequency (For 50 Watt Power Handling)
80
70
60
50
40
30
20
10
0
0
500
1000
1500
2000
Frequency (MHz)
4. R. Caverly and G. Hiller, “Establishing the Minimum Reverse Bias for a P-I-N Diode in a High Power Switch,”
IEEE Transactions on Microwave Theory and Techniques, Vol.38, No.12, December 1990
11
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
MASW-000834 and Recommended Driver with +5V & +28V DC Power5,6,7,8,9,10,11,12
ANT
MADR-008851 is the recommended driver for the
MASW-000834 Switch.
C3
27 pF
100V
L1
27 nH
R1
See Note 9
+5V
Link to MADR-008851 Datasheet
C4
1000 pF
C5
0.022 uF
TX Voltage
RX Voltage
TX
RX
C1
C2
27 pF
100V
27 pF
100V
SPDT
L2
27 nH
L3
27 nH
C8
20 pF
Note 11
+28V
+5V
L4
27 nH
C6
12 pF
C7
12 pF
TX
RX
SH Current
Logic
Input
C1
SH2
R2
MADR-008851-000100
Switch Driver
See Note 10
SH1
Ground
5. Forward Bias Diode Voltage: ΔVf is ~0.9V @ 22 mA; ΔVf is ~1.0V @ 35 mA
6. R1 is calculated by (Vcc-1.5V)/Iseries, where Iseries is the desired bias current for the series diodes. For 21 mA load current, R1 = 165 Ω @
VCC = 5.0V and 82 Ω @ VCC = 3.3V. For 32 mA load current, R1 = 110 Ω @ VCC = 5.0V and 56 Ω @ VCC= 3.3V.
7. R2 is calculated by (Vdd-1V)/Ishunt, where Ishunt is the desired forward bias current for the shunt diode. The power dissipation is calculated
by Ishunt x 27V. For 20 mA of Ishunt, R2 should use a 2511, 1W, 1.3k ohm resistor.
8. C8 is already built-in for M/A-COM MASW-000834-13560T switch.
9. The voltage at the common anode will be approximately 1.5V.
10. The current in through the back-biased diodes will be the leakage current for the diodes
11. C1-C5, L1-L4, R1, R2, and the switch are discrete components that should be installed on the user’s board. It is recommended that
Coilcraft 0603CS-27NXJLW or equivalent be used for L1-L4 at 2 GHz (values may vary based on the frequency).
12. There are 33 pF bypass capacitors included in the driver for the RX, TX, and SH1 ports. There are cases, especially at higher frequen-
cies, where the optional 12 pF bypass capacitors (C6 and C7) that are shown on the schematic are needed.
12
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
MASW-000834-13560T Outline – 4mm PQFN 16-Lead Saw Singulated
†
Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
13
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号：
MASW-000834_13560T_15
HMIC PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
TE
©2020 ICPDF网 联系我们和版权申明