MASWSS0100-DIE [TE]
GaAs SP3T 2.5 V High Power Switch 0.1 - 3.0 GHz; 砷化镓SP3T 2.5 V大功率开关0.1 - 3.0 GHz的型号: | MASWSS0100-DIE |
厂家: | TE CONNECTIVITY |
描述: | GaAs SP3T 2.5 V High Power Switch 0.1 - 3.0 GHz |
文件: | 总3页 (文件大小:104K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GaAs SP3T 2.5 V High Power Switch
0.1 - 3.0 GHz
MASWSS0100
V2
Features
Die Bond Pad Layout
•
•
•
•
•
•
Low Voltage Operation: 2.5V
Low Harmonics: -70 dBc at +34 dBm & 1 GHz
Low Insertion Loss: 0.5 dB at 1 GHz
High Isolation: 20 dB at 2 GHz
0.5 micron GaAs PHEMT Process
Supplied as Known Good Die
V1
RFC
V3
Description
M/A-COM’s MASWSS0100 is a GaAs PHEMT
MMIC single pole three throw (SP3T) high power
switch die. The MASWSS0100 is ideally suited for
applications where high power, low control voltage,
low insertion loss, high isolation, small size and low
cost are required.
Typical applications are for GSM, DCS and PCS
handset systems that connect separate transmit and
receive functions to a common antenna, as well as
other handset and related applications. This part
can be used in all systems operating up to 2.5 GHz
requiring high power at low control voltage.
RF1
RF2
V2
RF3
Pad Configuration
The MASWSS0100 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Pad Name
Description
V1
RF1
RF2
V2
Control 1
RF Port 1
RF Port 2
Control 2
RF Port 3
Control 3
Ordering Information1
RF3
V3
Part Number
MASWSS0100-DIE
1. Die quantity varies.
Product Description
Separated Die on Grip Ring1
RFC
Antenna/Common Port
Absolute Maximum Ratings 2,3
Parameter
Input Power
Absolute Maximum
+38 dBm
± 8.5 volts
Voltage
Operating Temperature
Storage Temperature
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
GaAs SP3T 2.5 V High Power Switch
0.1 - 3.0 GHz
MASWSS0100
V2
Electrical Specifications: TA = 25°C, VC = 0 V / 2.5 V, Z0 = 50 Ω 4
Parameter
Test Conditions
Units
Min.
Typ.
Max.
0.5 - 1.0 GHz
1.0 - 2.0 GHz
dB
dB
—
—
0.5
0.6
0.65
—
Insertion Loss 5
0.5 - 1.0 GHz
1.0 - 2.0 GHz
dB
dB
23
—
25
20
—
—
Isolation
Return Loss
P.1dB
0.5 - 2.5 GHz
—
dB
dBm
dBc
dBc
nS
—
—
—
—
—
20
38
—
—
2nd Harmonic
3rd Harmonic
Trise, Tfall
1.0 GHz, PIN = +34 dBm
1.0 GHz, PIN = +34 dBm
10% to 90% RF, 90% to 10% RF
-80
-70
83
—
-65
—
50% control to 90% RF
50% control to 10% RF
Ton, Toff
nS
—
94
—
Transients
In Band
2.5 V
mV
µA
—
—
58
50
—
Control Current
80
4. External DC blocking capacitors are required on all RF ports.
5. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz.
Functional Diagram
Truth Table 6,7
RFC–
RF1
RFC- RFC -
V1
V2
V3
RF2
RF3
1
0
0
0
1
0
0
0
1
On
Off
Off
Off
Off
On
Off
Off
On
6. State 0 = -5 V to +2.5 V, State 1 = -2.5 V to +5 V.
7. Differential voltage, V (state 1) - V (state 0), must be 2.5 V
minimum.
Qualification
Qualified to M/A-COM specification REL-201,
Process Flow –2.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
GaAs SP3T 2.5 V High Power Switch
0.1 - 3.0 GHz
MASWSS0100
V2
Typical Performance Curves
Insertion Loss vs. Frequency
Isolation vs. Frequency
40
1.0
IL+25°C
IL+85°C
IL-40°C
0.8
30
20
0.6
0.4
0.2
0.0
IL +25°C
10
IL +85°C
IL -40°C
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
3rd Harmonic vs. VC
2nd Harmonic vs. VC
-40
-50
-40
-50
25°C
85°C
-40°C
25°C
85°C
-40°C
-60
-60
-70
-70
-80
-80
-90
-90
-100
-100
2.0
2.5
3.0
3.5
4.0
4.5
5.0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
V (V)
V (V)
C
C
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号:
©2020 ICPDF网 联系我们和版权申明