MAVC-010000-001865 [TE]
VCO, SMT; VCO ， SMT
| 型号： | MAVC-010000-001865 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | VCO, SMT |
| 文件： | 总2页 (文件大小：117K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MAVC-010000-001865
VCO, SMT
1780—1950 MHz
Rev. VB
Features
• High Performance, Low Cost
• Low Phase Noise
• Miniature SMT Package (LSM1)
• RoHs Compliant
Description
This VCO, in a SMT package, provides electrical shielding, easy
PCB assembly and repeatable performance. The oscillator is
designed for use in wireless base stations and other applica-
tions.
M/A-COM VCOs are manufactured in an ISO9001 certified facil-
ity, incorporating surface mount assembly and automated elec-
trical testing. This ensures consistent electrical performance
and quality over volume production quantities.
Pin Configuration
Devices are designed to function after exposure to the shock,
vibration, thermal shock and moisture conditions typically en-
countered in base station and other infrastructure environments.
Pin No.
Function
RF Output
VCC
1
2
3
4
Vtune
GND
Electrical Specifications1:
TA = +25°C, Z0 = 50 Ohms, Vcc = 5V.
Parameter
Frequency Range
RF Output Power
Tuning Voltage
Phase Noise
Test Conditions
Units
MHz
dBm
V
Min
1780
-1.0
Typ
Max
1950
+3.0
+11
2
Over Top
2
Over VCC and Top
2
Over Top
+0.5
SSB at 10 kHz offset from carrier
SSB at 100 kHz offset from carrier
dBc/Hz
dBc/Hz
-103
-124
-100
-120
Average Tuning Sensitivity
Harmonic Output
MHz/V
dBc
20
-10
3.5
Frequency Pushing
Frequency Pulling
VCC = +5.25V ± 0.25V
MHz/V
MHz
MHz/°C
pF
1.5:1 VSWR load, all phases
100
-0.08
50
500
2
Frequency Drift
Over Top
Tune Input Capacitance
Supply Voltage (VCC
)
VCO oscillates
V
+4.75
+5.00
+5.25
1. All specification limits are indicated values @ +25 ºC and apply over Fout unless otherwise stated.
2. See Absolute Maximum Ratings for operating temperature.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAVC-010000-001865
VCO, SMT
1780—1950 MHz
Rev. VB
Absolute Maximum Ratings TA = +25°C
Ordering Information
Parameter
Absolute Maximum
4.5V to 5.5 V
Part Number
Package
Supply Voltage (VCC
)
Tape and Reel (500/Reel) 1
MAVC-010000-001865
Operating Temperature
Storage Temperature
-40°C to +85°C
1. See application note M513.
-45°C to +120°C
See App Note M2032
Solder Assembly
Temperature
Environmental Specifications
Devices are designed to function after exposure to vi-
bration, thermal shock and moisture conditions. See
MVS Qual Report for details of tests performed.
1. Operation of this device above any one of these parameters
may cause permanent damage.
Recommended PCB Layout
1.
2.
3.
Tolerance: ±0.1mm
View is shown from top of device.
Solder masked areas to be left clear. These areas
may have active vias.
Note: Dimensions in Millimetres. (Inch dimensions for reference only).
Outline Drawing
1.
2.
3.
4.
5.
Plating: Au, 0.05μm — 0.15μm over Ni barrier of 2.5μm — 5.0μm.
Internal Solder: Sn95.5/Ag4.0/Cu0.5, lead free.
Substrate: FR4
Cover: mild steel
Tolerance: ±0.2mm unless otherwise noted.
ECO History
Rev
A
Date
Description
By
JS
JS
21 Aug 2007
01/02/07
Created data sheet based upon samples data
Added RoHs Compliant statement
B
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明