首页 |元器件品牌

MW3 [TE]

Microwave Switching, Hermetically Sealed, DPDT; 微波开关，密封DPDT
MW3
型号： MW3
厂家： TE CONNECTIVITY    TE CONNECTIVITY
描述：

Microwave Switching, Hermetically Sealed, DPDT
微波开关，密封DPDT

开关 微波开关 光电二极管
文件： 总8页 (文件大小：299K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays  
Microwave Switching, Hermetically Sealed, DPDT  
Product Facts  
ꢀ Excellent signal isolation,  
stable insertion loss and  
low VSWR.  
ꢀ Provide repeatable RF  
performance at frequencies  
up to the 3 GHz. level  
(MW3/MW3HP),  
4 GHz. level (MW4/MW4HP)  
& 6 GHz. level  
(MW6/MW6HP).  
ꢀ Standard versions for  
applications ranging from  
wireless communications to  
precision high-speed test  
equipment.  
ꢀ High performance (HP)  
versions for use under more  
demanding environmental  
conditions.  
ꢀ Standard or sensitive (S)  
coils are offered in a range  
of DC input voltages.  
ꢀ 2 Form C (DPDT) contacts  
rated low-level to 1 amp.  
ꢀ Extended mechanical life  
expectancy of 10 million  
opertions.  
ꢀ Robust, hermetically sealed  
enclosure.  
These CII relays provide  
microwave frequency  
switching in a hermetically  
sealed, subminiature  
package.  
High performance models  
(MW3HP, MW4HP and  
MW6HP) offer extended  
temperature ratings of  
-65°C to +125°C while  
providing 30G’s vibration  
and 100G’s shock (75G’s  
for MW3) environmental  
ratings.  
Signal isolation is 18dB at 6  
GHz. (MW6/MW6HP), 18dB  
at 4 GHz. (MW4/MW4HP),  
and 22dB at 3 GHz.  
(MW3/MW3HP).  
Both standard and high  
performance models are  
offered in 3 GHz., 4 GHz.  
and 6 GHz. types.  
Insertion loss is 0.38dB for  
MW6/MW6HP, 0.27dB for  
MW4/MW4HP, and 0.36dB  
for MW3/MW3HP.  
All are available with either  
standard or sensitive DC  
coils. Nominal coil power is  
367-500mW (model  
dependent) for standard  
coils and 169-250mW for  
sensitive coils.  
Standard models (MW3,  
MW4 and MW6) perform in  
temperature ranges from  
-55°C to +85°C and  
withstand 10G vibration and  
30G shock.  
VSWR is a low 1.30:1 @  
6GHz. for MW6/MW6HP,  
1.36:1 @ 4GHz. for  
MW4/MW4HP, and 1.24:1  
@ 3GHz. for MW3/MW3HP.  
© 2003 by Tyco Electronics Corporation. All Rights Reserved.  
CII and TYCO are trademarks.  
1
Catalog 1654542  
Issued 12-03  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
reference purposes only.  
Specifications subject  
to change.  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
www.tycoelectronics.com  
UK: 44-141-810-8967  
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays  
Microwave Switching, Hermetically Sealed, DPDT (Continued)  
MW3 & MW3HP Models  
3 GHz. Switching  
Electrical Characteristics  
Contact Arrangement:  
2 Form C (DPDT)  
Contact Ratings  
Contact Load  
Type  
Operations (min.)  
100,000  
1.0A @ 28VDC  
Resistive  
Inductive  
Low Level  
Contact Resistance:  
200mA @ 28VDC (300mH)*  
30µA @ 50mVDC  
100,000  
Before life: 100 milliohms, max  
(measured @ 10mA @ 6VDC.)  
After life: 200 milliohms, max  
(measured @ 1A @ 28VDC.)  
10,000,000  
* The inductive rating is only applicable to high performance models (MW3HP and MW3HPS).  
Mechanical Life Expectancy:  
10 million operations  
Coil Voltages:  
5, 12, 18 & 26.5VDC (MW3)  
5, 6, 9, 12, 18 & 26.5VDC (MW3HP)  
Coil Data  
MW3 Models  
Coil Power (mw max @25°C):  
MW3 MW3S MW3HP MW3HPS  
Nominal  
Coil Voltage  
(VDC)  
Coil Resistance  
In Ohms  
20% @ 25°C  
Pickup Voltage  
VDC (Max.)  
@ 25°C  
Nominal  
Coil Power  
(mw) @ 25°C  
Maximum  
Coil  
Voltage  
Coil  
Designator  
675  
565  
673  
563  
Duty Cycle:  
Continuous  
Standard Coil  
5.0  
12.0  
50  
390  
3.6  
8.4  
500  
369  
368  
450  
5.8  
5
Pick-up Voltage:  
MW3: Approx 70% of nominal.  
16.0  
24.0  
32.0  
12  
18  
26  
MW3HP: Approx 50% of nominal.  
18.0  
880  
13.0  
17.0  
Pick-up Sensitivity (mw max @25°C):  
MW3 MW3S MW3HP MW3HPS  
26.5  
1,560  
Sensitive Coil  
5.0  
180  
90  
146  
68  
100  
850  
3.5  
9.0  
250  
169  
203  
213  
7.5  
5
12.0  
20.0  
30.0  
40.0  
12  
18  
26  
18.0  
1,600  
3,300  
13.5  
18.0  
Operating Characteristics  
Timing:  
26.5  
Operate Time (ms max.)  
MW3HP (High Performance) Models  
MW3 MW3S MW3HP MW3HPS  
4.0 6.0 2.0 4.0  
Release Time (ms max.)  
MW3 MW3S MW3HP MW3HPS  
3.0 3.0 1.5 2.0  
Bounce Time (ms max.)  
MW3 MW3S MW3HP MW3HPS  
1.5 1.5  
Nominal  
Coil Voltage  
(VDC)  
Coil Res.  
in Ohms  
10% @ 25°C  
Pickup V  
VDC (Max.) VDC (Max.)  
@25°C  
Release V  
Release V  
VDC (Min.)  
@25°C  
Nominal  
Coil Power  
(mw) @25°C  
Maximum  
Coil  
Voltage  
Coil  
Designator  
@25°C  
Standard Coil  
5.0  
6.0  
50  
98  
2.7  
3.5  
1.4  
2.0  
3.0  
4.0  
6.0  
8.0  
0.22  
0.28  
0.54  
0.63  
0.91  
1.37  
500  
367  
368  
369  
368  
450  
5.8  
8.0  
5
6
–
–
9.0  
220  
390  
880  
1,560  
5.3  
12.0  
16.0  
24.0  
32.0  
9
Dielectric Withstanding Voltage:  
Between Open Contacts,  
Between Adjacent Contacts and  
Between Contacts and Coil:  
MW3 types: 350Vrms, 60 Hz.  
MW3HP types: 500Vrms, 60 Hz.  
12.0  
7.0  
12  
18  
26  
18.0  
10.5  
14.2  
26.5  
Sensitive Coil  
5.0  
100  
200  
2.6  
3.4  
1.4  
2.0  
3.0  
4.0  
6.0  
8.0  
0.23  
0.28  
0.55  
0.64  
0.92  
1.4  
250  
180  
203  
169  
203  
213  
7.5  
5
6
Insulation Resistance:  
1,000 megohms @ 500VDC.  
6.0  
10.0  
15.0  
20.0  
30.0  
40.0  
9.0  
400  
4.85  
7.0  
9
Environmental Characteristics  
Temperature Range:  
MW3 types: -55°C to +85°C.  
MW3HP types: -65°C to +125°C.  
12.0  
850  
12  
18  
26  
18.0  
1,600  
3,300  
9.8  
26.5  
14.0  
Weight:  
MW3, MW3HP: 0.09 oz. (2.55 g)  
MW3S, MW3HPS: 0.12 oz. (3.40 g).  
Vibration Resistance:  
MW3 types:10 G’s, 10-500 Hz.  
MW3HP types: 30 G’s, 10-3,000 Hz  
Shock Resistance:  
MW3 types:30 G’s, 6 1 ms.  
MW3HP types: 75 G’s, 6 1 ms.  
2
Catalog 1654542  
Issued 12-03  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
www.tycoelectronics.com  
UK: 44-141-810-8967  
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays  
Microwave Switching, Hermetically Sealed, DPDT (Continued)  
MW3 & MW3HP Models  
3 GHz. Switching  
Insertion Loss & VSWR: NC Contacts  
Isolation  
Insertion Loss & VSWR: NO Contacts  
(dB)  
(dB)  
(dB)  
VSWR  
VSWR  
2.0  
2.0  
0.0  
0.0  
0
-10  
-20  
-30  
-40  
-50  
1.9  
1.8  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.1  
1.9  
1.8  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.1  
0.1  
0.2  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
0.1  
0.2  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
INSERTION LOSS  
INSERTION LOSS  
ISOLATION  
VSWR  
1.5  
VSWR  
1.5  
1.0  
3.0  
1.0  
3.0  
1.0  
0
1.0  
0
0.5  
1.0  
2.0  
2.5  
0.5  
1.0  
2.0  
2.5  
0
0.5  
1.0  
1.5  
2.0  
2.5  
3.0  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
Test Conditions  
Test Board: 0.031” double sided copper clad, PTFE based laminate.  
Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces.  
Temperature: Room ambient.  
Signal Strength: 0 dBm.  
Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical.  
Header  
Enclosures  
.370 (9.40) DIA MAX  
.031 .003  
(0.79)  
.370 (9.40) DIA MAX  
.031 .003  
(0.79)  
.335 (8.51) DIA MAX  
.035 .010  
(0.89)  
.035 .010  
(0.89)  
.335 (8.51) DIA MAX  
GROUND PIN  
(OPTIONAL)  
.385 (9.78)  
MAX  
.275 (6.99)  
MAX  
.200 DIA  
(5.08)  
GROUND PIN  
(OPTIONAL)  
.200 DIA  
(5.08)  
+
+
36° 3°  
36° 3°  
TERMINAL  
A = .750 MIN (19.05)  
P = .187 .010 (4.75 .25)  
Ground Pin  
Position “G”  
Ground Pin  
Position “E”  
+.002  
-.001  
+.002  
-.001  
.017  
(0.43) DIA  
.017  
(0.43) DIA  
For other ground pin configurations consult factory.  
.370 (9.40) DIA MAX  
.370 (9.40) DIA MAX  
Header and Terminal Finish:  
Nickel plated on MW3 & MW3S.  
Tin-lead plated on MW3HP & MW3HPS.  
MW3S / MW3HPS  
MW3 / MW3HP  
Part Numbering System  
Typical Part Number  
Wiring Diagram  
MW3 S – 5  
A
G
Series:  
MW3 = 3 GHz. switching relay  
MW3HP = High performance 3 GHz. switching relay  
Coil Sensitivity:  
Leave Blank = Standard Coil  
S = Sensitive Coil  
Coil Designator:  
5 = 5VDC  
6 = 6VDC†  
18 = 18VDC  
9 = 9VDC†  
12 = 12VDC  
26 = 26.5VDC  
Terminal View  
† 6 and 9 volt coil only available on high performance models.  
Terminal Length:  
A = 0.750 in (19.05 mm)  
P = 0.187 0.010 in (4.75 0.25 mm)  
Ground Pin Position (see header drawings above):  
G = Opposite locating tab  
E = Near locating tab.  
Consult factory for other ground pin configurations.  
3
Catalog 1654542  
Issued 12-03  
Dimensions are in inches and  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
www.tycoelectronics.com  
UK: 44-141-810-8967  
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays  
Microwave Switching, Hermetically Sealed, DPDT (Continued)  
MW4 & MW4HP Models  
4 GHz. Switching  
Electrical Characteristics  
Contact Arrangement:  
2 Form C (DPDT)  
Contact Ratings  
Contact Load  
Type  
Operations (min.)  
100,000  
1.0A @ 28VDC  
Resistive  
Inductive  
Low Level  
Contact Resistance:  
200mA @ 28VDC (300mH)*  
30µA @ 50mVDC  
100,000  
Before life: 100 milliohms, max  
(measured @ 10mA @ 6VDC.)  
After life: 200 milliohms, max  
(measured @ 1A @ 28VDC.)  
10,000,000  
* The inductive rating is only applicable to high performance models (MW4HP and MW4HPS).  
Mechanical Life Expectancy:  
10 million operations  
Coil Voltages:  
5, 12, 18 & 26.5VDC (MW4)  
5, 6, 9, 12, 18 & 26.5VDC (MW4HP)  
Coil Data  
MW4 Models  
Coil Power (mw max @25°C):  
MW4 MW4S MW4HP MW4HPS  
Nominal  
Coil Voltage  
(VDC)  
Coil Resistance  
In Ohms  
20% @ 25°C  
Pickup Voltage  
VDC (Max.)  
@ 25°C  
Nominal  
Coil Power  
(mw) @ 25°C  
Maximum  
Coil  
Voltage  
Coil  
Designator  
675  
565  
673  
563  
Duty Cycle:  
Continuous  
Standard Coil  
5.0  
12.0  
50  
390  
3.6  
8.4  
500  
369  
368  
450  
5.8  
5
Pick-up Voltage:  
MW4: Approx 70% of nominal.  
16.0  
24.0  
32.0  
12  
18  
26  
MW4HP: Approx 50% of nominal.  
18.0  
880  
13.0  
17.0  
Pick-up Sensitivity (mw max @25°C):  
MW4 MW4S MW4HP MW4HPS  
26.5  
1,560  
Sensitive Coil  
5.0  
180  
90  
123  
68  
100  
850  
3.5  
9.0  
250  
169  
203  
213  
7.5  
5
12.0  
20.0  
30.0  
40.0  
12  
18  
26  
18.0  
1,600  
3,300  
13.5  
18.0  
Operating Characteristics  
Timing:  
26.5  
Operate Time (ms max.)  
MW4HP (High Performance) Models  
MW4 MW4S MW4HP MW4HPS  
4.0 6.0 2.0 4.0  
Release Time (ms max.)  
MW4 MW4S MW4HP MW4HPS  
3.0 3.0 1.5 2.0  
Bounce Time (ms max.)  
MW4 MW4S MW4HP MW4HPS  
1.5 1.5  
Nominal  
Coil Voltage  
(VDC)  
Coil Res.  
in Ohms  
10% @ 25°C  
Pickup V  
VDC (Max.) VDC (Max.)  
@25°C  
Release V  
Release V  
VDC (Min.)  
@25°C  
Nominal  
Coil Power  
(mw) @25°C  
Maximum  
Coil  
Voltage  
Coil  
Designator  
@25°C  
Standard Coil  
5.0  
6.0  
50  
98  
2.7  
3.5  
1.4  
2.0  
3.0  
4.0  
6.0  
8.0  
0.22  
0.28  
0.54  
0.63  
0.91  
1.37  
500  
367  
368  
369  
368  
450  
5.8  
8.0  
5
6
–
–
9.0  
220  
390  
880  
1,560  
5.3  
12.0  
16.0  
24.0  
32.0  
9
Dielectric Withstanding Voltage:  
Between Open Contacts,  
Between Adjacent Contacts and  
Between Contacts and Coil:  
MW4 types: 350Vrms, 60 Hz.  
MW4HP types: 500Vrms, 60 Hz.  
12.0  
7.0  
12  
18  
26  
18.0  
10.5  
14.2  
26.5  
Sensitive Coil  
5.0  
100  
200  
2.6  
3.4  
1.4  
2.0  
3.0  
4.0  
6.0  
8.0  
0.23  
0.28  
0.55  
0.64  
0.92  
1.4  
250  
180  
203  
169  
203  
213  
7.5  
5
6
Insulation Resistance:  
1,000 megohms @ 500VDC.  
6.0  
10.0  
15.0  
20.0  
30.0  
40.0  
9.0  
400  
4.85  
7.0  
9
Environmental Characteristics  
Temperature Range:  
MW4 types: -55°C to +85°C.  
MW4HP types: -65°C to +125°C.  
12.0  
850  
12  
18  
26  
18.0  
1,600  
3,300  
9.8  
26.5  
14.0  
Weight:  
MW4, MW4HP: 0.09 oz. (2.55 g)  
MW4S, MW4HPS: 0.12 oz. (3.40 g).  
Vibration Resistance:  
MW4 types:10 G’s, 10-500 Hz.  
MW4HP types: 30 G’s, 10-3,000 Hz  
Shock Resistance:  
MW4 types:30 G’s, 6 1 ms.  
MW4HP types: 100 G’s, 6 1 ms.  
4
Catalog 1654542  
Issued 12-03  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
www.tycoelectronics.com  
UK: 44-141-810-8967  
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays  
Microwave Switching, Hermetically Sealed, DPDT (Continued)  
MW4 & MW4HP Models  
4 GHz. Switching  
Insertion Loss & VSWR: NC Contacts  
Isolation  
Insertion Loss & VSWR: NO Contacts  
(dB)  
(dB)  
(dB)  
VSWR  
VSWR  
2.0  
2.0  
1.9  
1.8  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.1  
1.0  
0.0  
0.05  
0.0  
0
1.9  
1.8  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.1  
0.05  
0.10  
0.15  
0.20  
0.25  
0.30  
0.35  
0.40  
0.45  
0.10  
0.15  
0.20  
0.25  
0.30  
0.35  
0.40  
0.45  
0.50  
-10  
-20  
-30  
-40  
-50  
INSERTION LOSS  
INSERTION LOSS  
ISOLATION  
VSWR  
VSWR  
1.0  
4.0  
0.50  
0
0
0.5  
1.0  
1.5  
2.0  
2.5  
3.0  
3.5  
0.5  
1.0  
1.5  
2.0  
2.5  
3.0  
3.5  
4.0  
0
0.5  
1.0  
1.5  
2.0  
2.5  
3.0  
3.5  
4.0  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
Test Conditions  
Test Board: 0.031” double sided copper clad, PTFE based laminate.  
Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces.  
Temperature: Room ambient.  
Signal Strength: 0 dBm.  
Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical.  
Header  
Enclosures  
.335 (8.51) SQ MAX  
.375 (9.53) SQ MAX  
.031 .003 (0.79)  
.035 .010  
(0.98)  
.335 (8.51) SQ MAX  
.385 (9.78)  
MAX  
.280 (7.11)  
MAX  
.200 DIA  
(5.08)  
+
36° 3°  
TERMINAL  
P = .187 .010 (4.75 .25)  
A = .750 MIN (19.05)  
B = 1.50 MIN (38.10)  
Header and Terminal Finish:  
Gold plated  
.017 +-..000021 (0.43) DIA  
.370 (9.40) SQ MAX  
.017 +-..000021 (0.43) DIA  
.370 (9.40) SQ MAX  
MW4S / MW4HPS  
MW4 / MW4HP  
Part Numbering System  
Typical Part Number  
Wiring Diagram  
MW4  
S – 5 P  
Series:  
MW4 = 4 GHz. switching relay  
MW4HP = High performance 4 GHz. switching relay  
Coil Sensitivity:  
Leave Blank = Standard Coil  
S = Sensitive Coil  
Coil Designator:  
5 = 5VDC  
6 = 6VDC†  
18 = 18VDC  
9 = 9VDC†  
12 = 12VDC  
26 = 26.5VDC  
Terminal View  
† 6 and 9 volt coil only available on high performance models.  
Terminal Length:  
A = 0.750 in (19.05 mm)  
B = 1.50 in (38.105 mm) – only available on high performance models  
P = 0.187 0.010 in (4.75 0.25 mm)  
5
Catalog 1654542  
Issued 12-03  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
www.tycoelectronics.com  
UK: 44-141-810-8967  
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays  
Microwave Switching, Hermetically Sealed, DPDT (Continued)  
MW6 & MW6HP Models  
6 GHz. Switching  
Electrical Characteristics  
Contact Arrangement:  
2 Form C (DPDT)  
Contact Ratings  
Contact Load  
Type  
Operations (min.)  
100,000  
1.0A @ 28VDC  
Resistive  
Inductive  
Low Level  
Contact Resistance:  
200mA @ 28VDC (300mH)*  
30µA @ 50mVDC  
100,000  
Before life: 100 milliohms, max  
(measured @ 10mA @ 6VDC.)  
After life: 200 milliohms, max  
(measured @ 1A @ 28VDC.)  
10,000,000  
* The inductive rating is only applicable to high performance models (MW6HP and MW6HPS).  
Mechanical Life Expectancy:  
10 million operations  
Coil Voltages:  
5, 12, 18 & 26.5VDC (MW6)  
5, 6, 9, 12, 18 & 26.5VDC (MW6HP)  
Coil Data  
MW6 Models  
Coil Power (mw max @25°C):  
MW6 MW6S MW6HP MW6HPS  
Nominal  
Coil Voltage  
(VDC)  
Coil Resistance  
In Ohms  
20% @ 25°C  
Pickup Voltage  
VDC (Max.)  
@ 25°C  
Nominal  
Coil Power  
(mw) @ 25°C  
Maximum  
Coil  
Voltage  
Coil  
Designator  
675  
565  
673  
563  
Duty Cycle:  
Continuous  
Standard Coil  
5.0  
12.0  
50  
390  
3.6  
8.4  
500  
369  
368  
450  
5.8  
5
Pick-up Voltage:  
MW6: Approx 70% of nominal.  
16.0  
24.0  
32.0  
12  
18  
26  
MW6HP: Approx 50% of nominal.  
18.0  
880  
13.0  
17.0  
Pick-up Sensitivity (mw max @25°C):  
MW6 MW6S MW6HP MW6HPS  
26.5  
1,560  
Sensitive Coil  
5.0  
180  
90  
123  
68  
100  
850  
3.5  
9.0  
250  
169  
203  
213  
7.5  
5
12.0  
20.0  
30.0  
40.0  
12  
18  
26  
18.0  
1,600  
3,300  
13.5  
18.0  
Operating Characteristics  
Timing:  
26.5  
Operate Time (ms max.)  
MW6HP (High Performance) Models  
MW6 MW6S MW6HP MW6HPS  
4.0 6.0 2.0 4.0  
Release Time (ms max.)  
MW6 MW6S MW6HP MW6HPS  
3.0 3.0 1.5 2.0  
Bounce Time (ms max.)  
MW6 MW6S MW6HP MW6HPS  
1.5 1.5  
Nominal  
Coil Voltage  
(VDC)  
Coil Res.  
in Ohms  
10% @ 25°C  
Pickup V  
VDC (Max.) VDC (Max.)  
@25°C  
Release V  
Release V  
VDC (Min.)  
@25°C  
Nominal  
Coil Power  
(mw) @25°C  
Maximum  
Coil  
Voltage  
Coil  
Designator  
@25°C  
Standard Coil  
5.0  
6.0  
50  
98  
2.7  
3.5  
1.4  
2.0  
3.0  
4.0  
6.0  
8.0  
0.22  
0.28  
0.54  
0.63  
0.91  
1.37  
500  
367  
368  
369  
368  
450  
5.8  
8.0  
5
6
–
–
9.0  
220  
390  
880  
1,560  
5.3  
12.0  
16.0  
24.0  
32.0  
9
Dielectric Withstanding Voltage:  
Between Open Contacts,  
Between Adjacent Contacts and  
Between Contacts and Coil:  
MW6 types: 350Vrms, 60 Hz.  
MW6HP types: 500Vrms, 60 Hz.  
12.0  
7.0  
12  
18  
26  
18.0  
10.5  
14.2  
26.5  
Sensitive Coil  
5.0  
100  
200  
2.6  
3.4  
1.4  
2.0  
3.0  
4.0  
6.0  
8.0  
0.23  
0.28  
0.55  
0.64  
0.92  
1.4  
250  
180  
203  
169  
203  
213  
7.5  
5
6
Insulation Resistance:  
1,000 megohms @ 500VDC.  
6.0  
10.0  
15.0  
20.0  
30.0  
40.0  
9.0  
400  
4.85  
7.0  
9
Environmental Characteristics  
Temperature Range:  
MW6 types: -55°C to +85°C.  
MW6HP types: -65°C to +125°C.  
12.0  
850  
12  
18  
26  
18.0  
1,600  
3,300  
9.8  
26.5  
14.0  
Weight:  
MW6, MW6HP: 0.09 oz. (2.55 g)  
MW6S, MW6HPS: 0.12 oz. (3.40 g).  
Vibration Resistance:  
MW6 types:10 G’s, 10-500 Hz.  
MW6HP types: 30 G’s, 10-3,000 Hz  
Shock Resistance:  
MW6 types:30 G’s, 6 1 ms.  
MW6HP types: 100 G’s, 6 1 ms.  
6
Catalog 1654542  
Issued 12-03  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
www.tycoelectronics.com  
UK: 44-141-810-8967  
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays  
Microwave Switching, Hermetically Sealed, DPDT (Continued)  
MW6 & MW6HP Models  
6 GHz. Switching  
Insertion Loss & VSWR: NC Contacts  
Isolation  
Insertion Loss & VSWR: NO Contacts  
(dB)  
(dB)  
VSWR  
VSWR  
(dB)  
2.0  
2.0  
0.0  
0.0  
0.1  
0.2  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
1.0  
0
1.9  
1.8  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.9  
1.8  
0.1  
0.2  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
INSERTION LOSS  
-10  
INSERTION LOSS  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
-20  
-30  
-40  
-50  
ISOLATION  
VSWR  
VSWR  
1.1  
1.0  
1.1  
1.0  
1.0  
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0  
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0  
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
Test Conditions  
Test Board: 0.031” double sided copper clad, PTFE based laminate.  
Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces.  
Temperature: Room ambient.  
Signal Strength: 0 dBm.  
Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical.  
Header  
Enclosures  
.335 (8.51) SQ MAX  
.375 (9.53) SQ MAX  
.031 .003 (0.79)  
.035 .010  
(0.98)  
.335 (8.51) SQ MAX  
.385 (9.78)  
MAX  
.280 (7.11)  
MAX  
.200 DIA  
(5.08)  
+
36° 3°  
TERMINAL  
P = .187 .010 (4.75 .25)  
A = .750 MIN (19.05)  
B = 1.50 MIN (38.10)  
Header and Terminal Finish:  
Gold plated  
.017 +-..000021 (0.43) DIA  
.370 (9.40) SQ MAX  
.017 +-..000021 (0.43) DIA  
.370 (9.40) SQ MAX  
MW6S / MW6HPS  
MW6 / MW6HP  
Part Numbering System  
Typical Part Number  
Wiring Diagram  
MW6  
S – 5 P  
Series:  
MW6 = 6 GHz. switching relay  
MW6HP = High performance 6 GHz. switching relay  
Coil Sensitivity:  
Leave Blank = Standard Coil  
S = Sensitive Coil  
Coil Designator:  
5 = 5VDC  
6 = 6VDC†  
18 = 18VDC  
9 = 9VDC†  
12 = 12VDC  
26 = 26.5VDC  
Terminal View  
† 6 and 9 volt coil only available on high performance models.  
Terminal Length:  
A = 0.750 in (19.05 mm)  
B = 1.50 in (38.105 mm) – only available on high performance models  
P = 0.187 0.010 in (4.75 0.25 mm)  
7
Catalog 1654542  
Issued 12-03  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
www.tycoelectronics.com  
UK: 44-141-810-8967  
Global Contacts  
Americas  
Argentina – Buenos Aires  
Canada – Markham  
Mexico – Mexico City  
For Latin/South American  
Countries not shown  
Phone:  
Fax:  
+54-11-4733-2200  
+54-11-4733-2250  
Phone:  
Fax:  
+905-475-6222  
+905-474-5520  
Phone:  
Fax:  
+52-55-5-729-0425  
+52-55-5-398-1430  
Phone:  
Fax:  
+57-1-240-9396  
+57-1-660-0206  
Product Information Center:  
Brasil – São Paulo  
United States – Harrisburg, PA  
Phone:  
Fax:  
+55-11-3611-1311  
+55-11-3611-0397  
Phone:  
Fax:  
+717-564-0100  
+717-986-7575  
Product Information Center:  
(Technical Support)  
Colombia – Bogota  
Phone:  
Fax:  
+57-1-240-9396  
+57-1-660-0206  
Phone:  
Fax:  
+800-522-6752  
+717-986-7575  
Asia/Pacific  
Australia – Sydney  
Japan – Kawasaki, Kanagawa  
New Zealand – Auckland  
Singapore – Singapore  
Phone:  
Fax:  
+61-2-9840-8200  
+61-2-9899-5649  
Phone:  
Fax:  
+81-44-844-8079  
+81-44-844-8733  
Phone:  
Fax:  
+64-9-634-4580  
+64-9-634-4586  
Phone:  
Fax:  
Raychem Products  
Phone:  
Fax:  
+65-4820-311  
+65-4821-012  
Product Information Center:  
(Technical Support)  
Phone:  
Fax:  
Product Information Center:  
(Technical Support)  
Phone:  
Fax:  
Philippines – Makati City  
Phone:  
Fax:  
+65-4866-151  
+65-6545-514  
+61-2-9554-2600  
+61-2-9502-2556  
+81-44-844-8013  
+81-44-812-3200  
+632-867-8641  
+632-867-8661  
People’s Republic of China  
Hong Kong  
Phone:  
Fax:  
+852-2735-1628  
+852-2735-0243  
Indonesia – Jakarta  
Phone:  
Fax:  
+82-2-3274-0535  
+82-2-3274-0524/0531  
Phone:  
Fax:  
+66-2-955-0500  
+66-2-955-0505  
Phone:  
Fax:  
+6221-526-7852  
+6221-526-7856  
Shanghai  
Phone:  
Fax:  
+86-21-6485-0602  
+86-21-6485-0728  
Malaysia – Selangor  
Vietnam – Ho Chi Minh City  
Phone:  
Fax:  
+60-3-7053055  
+60-3-7053066  
Phone:  
Fax:  
+84-8-8232-546/7  
+84-8-8221-443  
Shunde  
Phone:  
Fax:  
+86-765-775-1368  
+86-765-775-2823  
Europe/Middle East/Africa  
Spain – Barcelona  
Austria – Vienna  
Germany – Bensheim  
Italy – Collegno (Torino)  
Phone:  
Fax:  
+34-93-291-0330  
+34-93-201-7879  
Phone:  
Fax:  
+43-190-560-0  
+43-190-560-1333  
Phone:  
Fax:  
+49-6251-133-0  
+49-6251-133-1600  
Phone:  
Fax:  
+39-011-4012-111  
+39-011-4031-116  
Product Information Center:  
(Technical Support):  
Product Information Center:  
(Technical Support)  
Lithuania – Vilnius  
Belgium – Kessel-Lo  
Phone:  
Fax:  
+370-5-21-31-402  
+370-5-21-31-403  
Phone:  
Fax:  
+34-93-291-0330  
+34-93-200-3779  
Phone:  
Fax:  
+49-6251-133-1999  
+49-6251-133-1988  
Phone:  
Fax:  
+32-16-352-300  
+32-16-352-352  
Netherlands – ’s-Hertogenbosch  
Sweden – Upplands Väsby  
Germany – Langen  
Bulgaria – Sofia  
Phone:  
Fax:  
+31-73-6246-246  
+31-73-6212-365  
Phone:  
Fax:  
+46-8-50-72-50-00  
+46-8-50-72-50-01  
Phone:  
Fax:  
+49-6103-709-0  
+49-6103-709-1223  
Phone:  
Fax:  
+359-2-971-2152  
+359-2-971-2153  
Product Information Center:  
Czech Republic – Kurim  
Phone:  
Fax:  
+420-5-41-162-111  
+420-5-41-162-223  
Norway – Nesbru  
Phone:  
Fax:  
+47-66-77-88-99  
+47-66-77-88-55  
Turkey – Istanbul  
Germany  
HTS Division – Neunkirchen  
Phone:  
Fax:  
Phone:  
+90-212-281-8181…3  
+90-212-282-5130/5430  
+90-212-281-8184  
+49-2247-305-0  
+49-2247-305-122  
Poland – Warsaw  
Phone:  
Fax:  
Fax:  
+48-22-45-76-700  
+48-22-45-76-720  
Ukraine – Kiev  
Great Britain –  
Stanmore Middlesex  
Phone:  
Fax:  
Product Information Center:  
(Technical Support)  
Freephone GB: 0800-267-666  
Phone:  
Fax:  
Great Britain – Dorcan, Swindon  
Raychem Products  
Phone:  
Fax:  
Phone:  
Fax:  
+38-044-238-6908  
+38-044-568-5740  
Romania – Bucharest  
Phone:  
Fax:  
+44-181-954-2356  
+44-181-954-6234  
+40-1-311-3479+3596  
+40-1-312-0574  
Russia – Moscow  
Phone:  
Fax:  
+7-095-926-55-06…09  
+7-095-926-55-05  
+44-141 810 8967…69  
+44-141 810 8971  
Russia – St. Petersburg  
Phone:  
Fax:  
+7-812-325-30-83  
+7-812-325-32-88  
+44-1793-528171  
+44-1793-572516  
Scotland – Dundee  
Madison Cable Products  
Phone:  
Fax:  
Greece – Athens  
Phone:  
Fax:  
+44-1382-508080  
+44-1382-505060  
+30-1-9370-396/397  
+30-1-9370-655  
(Technical Support)  
Phone:  
Fax:  
+33-1-3420-8943  
+33-1-3420-8623  
Slovakia – Banská Bystrica  
Hungary – Budapest  
Phone:  
Fax:  
+421-48-415-20-11/12  
+421-48-415-20-13  
Phone:  
Fax:  
+36-1-289-1000  
+36-1-289-1010  
France  
Tyco Electronics Export –  
St Ouen L’Aumone  
Phone:  
Fax:  
Slovenia – Ljubljana  
Phone:  
Fax:  
+386-1561-3270  
+386-1561-3240  
+33-1-3440-7200  
+33-1-3440-7220 or  
+33-1-3440-7230  
South Africa – Port Elizabeth  
Phone:  
Fax:  
+27-41-405-4500  
+27-41-486-1314  
1654542–2.5M–KRG–FP–12-03  
Printed in the U.S.A.  
Tyco Electronics Corporation  
www.tycoelectronics.com  

相关型号：

MW35

 RESISTOR, WIRE WOUND, 3W, 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 3; 5; 10%, 5 - 900ppm, 0.05ohm - 10000ohm, SURFACE MOUNT, 5018, MELF, LEAD/ROHS COMPLIANT
RCD

MW35-0.0536OHM-FBW

 Fixed Resistor, Wire Wound, 3W, 0.0536ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF, ROHS COMPLIANT
RCD

MW35-0.0681OHM-FBQ

 Fixed Resistor, Wire Wound, 3W, 0.0681ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF
RCD

MW35-0.0681OHM-FBW

 Fixed Resistor, Wire Wound, 3W, 0.0681ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF, ROHS COMPLIANT
RCD

MW35-0.0698OHM-FTWW

 Wire Wound Resistor, RESISTOR, WIRE WOUND, 3 W, 1 %, 300 ppm, 0.0698 ohm, SURFACE MOUNT, MELF, ROHS COMPLIANT
RCD

MW35-0.0732OHM-FB

 Fixed Resistor, Wire Wound, 3W, 0.0732ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF
RCD

MW35-0.0732OHM-FBQ

 Fixed Resistor, Wire Wound, 3W, 0.0732ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF
RCD

MW35-0.0732OHM-FBQQ

 Fixed Resistor, Wire Wound, 3W, 0.0732ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF
RCD

MW35-0.0732OHM-FBW

 Fixed Resistor, Wire Wound, 3W, 0.0732ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF, ROHS COMPLIANT
RCD

MW35-0.0732OHM-FT

 Fixed Resistor, Wire Wound, 3W, 0.0732ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF
RCD

MW35-0.0732OHM-FTQ

 Fixed Resistor, Wire Wound, 3W, 0.0732ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF
RCD

MW35-0.0732OHM-FTQQ

 Fixed Resistor, Wire Wound, 3W, 0.0732ohm, 200V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 5018, MELF
RCD
©2020 ICPDF网 联系我们和版权申明