SMS-CP-19-X [TE]
T107M Handheld Printer; T107M手持式打印机型号: | SMS-CP-19-X |
厂家: | TE CONNECTIVITY |
描述: | T107M Handheld Printer |
文件: | 总30页 (文件大小:1474K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRINTERS
T107M Series Printers . . . . . . . . . . . . . . .135
T200 Series Printers . . . . . . . . . . . . . . . . .137
T300 Series Printers . . . . . . . . . . . . . . . . .138
T400 Series Printers . . . . . . . . . . . . . . . . .139
T612M-DS Printer . . . . . . . . . . . . . . . . . . .140
AM6310 Printer . . . . . . . . . . . . . . . . . . . . .141
LMS-6000 Laser Marking System . . . .142
LMS-9000 Laser Marking System . . . .143
BSC-100 Barcode scanners . . . . . . . . . .144
BSC-200 Hand held imager . . . . . . . . . .145
VLD-100 Hand held imager . . . . . . . . . .146
VRF-100 Data Matrix Verifier . . . . . . . .147
RIBBONS
Thermal Transfer . . . . . . . . . . . . . . . . . . . .148
Dot Matrix . . . . . . . . . . . . . . . . . . . . . . . . . .154
SOFTWARE
WinTotal . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
PrintEasy . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
APPLICATION SYSTEMS
HL2010E/HL1910E
hand held heater . . . . . . . . . . . . . . . . . . . .160
AMP-TY Nylon cable ties . . . . . . . . . . . . .161
AMP-TY Application Tool . . . . . . . . . . . .162
iPntesr
134
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
Printers
T107M Handheld Printer
The new T107M from Tyco Electronics is perfect for the
Printer Specifications
Printing Method
Dimensions
professional user who needs an affordable label printer for on-site
applications that's tough and easy to use. Contractors, panel
builders and facility managers will save time and money by using
the special Hot Keys that provide labels at the touch of a button
including wire and cable wraps,module marking, fixed length,
serialization, vertical printing, barcodes, symbols and much more.
Thermal Transfer Printhead (180 dpi)
70 mm L x 114mm W x 212mm H
519g
Printer Weight
Keyboard
ABC layout
To access international characters: Rapid
Accented Character Entry, according to the
mobile phone principle.
The T107M offers clear, smudge-free high-performance labels that
stick permanently to a variety of surfaces and provides remarkable
MIL-spec print permanence on Heat Shrink Tubing. Print media is
offered in easy-to-load cassettes and includes an optimized ribbon
and choice of material: Heat-Shrink, Nylon Cloth, Vinyl, Polyester,
and Polypropylene labels.
LCD Display
2 lines
Rechargeable battery pack life indicator
Display backlighting
Operating conditions
Storage conditions
Temperature: 4°C to 40°C (39°F to 104°F)
Humidity: 10% to 90% RH
Temperature : 0°C to 90°C (32°F to 194°F)
Humidity: 10% to 90% RH
Product Order Code
T107M-SMS-PRINTER-KIT-US
T107M-SMS-PRINTER-KIT-UK
T107M-SMS-PRINTER-KIT-EU
T107M-SMS-PRINTER-KIT-AUZ
T107M-SMS-PRINTER-KITASI
T107M-SMS-PRINTER-US
T107M-SMS-PRINTER-EU
SMS-US-A/C-ADAPTOR
SMS-EU-A/C-ADAPTOR
SMS-ASIA-A/C-ADAPTER
SMS-AUZ-A/C-ADAPTOR
SMS-BATTERY-PACK
Description
Printer Kit - US power adaptor included
Printer Kit - UK power adaptor included
Printer Kit - European power adaptor included
Printer Kit - Australia power adaptor included
Printer Kit - Asia power adaptor included
Printer Only (US)
Printer Only (European)
US A/C power adaptor
European A/C power adaptor
UK & Asia A/C power adaptor
Australian A/C power adaptor
Rechargeable battery pack
Soft carry strap
SMS-CARRY STRAP
SMS-PRINTER-HARDCASE
Hard case
Printer Kit Contents
Printer
Rubber protection bumper
User guide
Six (6) AA batteries
Power adaptor
Hard carry case
One (1) 19mm white flexible nylon tape printer cassette
One (1) 9mm yellow heat-shrinkable tubing printer cassette
See page 136 for available printer cassettes and ordering information.
Pinters
135
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Printers
T107M Handheld Printer Cassettes
Ordering Infornation
T107M Cassettes
Cable Diameter
Length
Shrink
Radio
Technical
Datasheet
Description
Material
mm
inches
0.05 - 0.09
0.05 - 0.09
0.07 - 0.15
0.05 - 0.15
0.12 - 0.20
0.12 - 0.20
0.18 - 0.34
0.18 - 0.34
m
Color
Yellow
White
Yellow
White
Yellow
White
Yellow
White
SMS-TMS-3.9-4
SMS-TMS-3.9-9
SMS-TMS-5.2-4
SMS-TMS-5.2-9
SMS-TMS-7.9-4
SMS-TMS-7.9-9
SMS-TMS-13.2-4
SMS-TMS-13.2-9
Heat-shrink tubing
Heat-shrink tubing
Heat-shrink tubing
Heat-shrink tubing
Heat-shrink tubing
Heat-shrink tubing
Heat-shrink tubing
Heat-shrink tubing
1.18 - 2.33
1.18 - 2.33
1.73 - 3.73
1.73 - 3.73
2.97 - 5.13
2.97 - 5.13
4.64 - 8.70
4.64 - 8.70
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
3:1
3:1
3:1
3:1
3:1
3:1
3:1
3:1
TTDS-122
TTDS-122
TTDS-122
TTDS-122
TTDS-122
TTDS-122
TTDS-122
TTDS-122
Width
Length
m
Technical
Datasheet
Description
Material
mm
12
inches
0.47
Color
Yellow
White
White
SMS-NC-12-4
SMS-NC-12-9
SMS-NC-19-9
Nylon Cloth
Nylon Cloth
Nylon Cloth
3.5
3.5
3.5
TTDS-123
TTDS-123
TTDS-123
12
0.47
19
0.75
SMS-PPNA--6-9
SMS-PPNA-9-9
Non-adhesive tag
Non-adhesive tag
6
9
0.24
0.35
5.5
5.5
White
White
TTDS-124
TTDS-124
SMS-V-12-4
SMS-V-12-9
SMS-V-19.2
SMS-V-19-4
SMS-V-19-5
SMS-V-19-9
Colored vinyl
Colored vinyl
Colored vinyl
Colored vinyl
Colored vinyl
Colored vinyl
12
12
19
19
19
19
0.47
0.47
0.75
0.75
0.75
0.75
5.5
5.5
5.5
5.5
5.5
5.5
Yellow
White
Red
TTDS-125
TTDS-125
TTDS-125
TTDS-125
TTDS-125
TTDS-125
Yellow
Green
White
SMS-WP-9-9
Polyester
Polyester
Polyester
Polyester
Polyester
Polyester
9
0.35
0.47
0.47
0.75
0.47
0.75
5.5
5.5
5.5
5.5
5.5
5.5
White
White
TTDS-126
TTDS-126
TTDS-127
TTDS-127
SMS-WP-12-9
SMS-MP-12-8A
SMS-MP-19-8A
SMS-CP-12-X
SMS-CP-19-X
12
12
19
12
19
Metalized
Metalized
Clear
Clear
iPntesr
136
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Printers
T200 Series portable thermal transfer printers
The T200 series of printers are portable/desktop thermal transfer
Printer Specifications
printers with a 4.1" print head offering an economical option for
low volume customers who want to take advantage of thermal
transfer printing technology. Their small, light weight design
makes them ideal for applications requiring portability or in
environments with multiple workstations where space is limited.
Tyco Electronics
T208M-TTDS-011
T212M-TTDS-064
Print head width
104mm (4.09")
Print head resolution
T208M: 8dpmm (203 dpi)
T212M: 12dpmm (305 dpi)
51mm/sec (2 inch/sec)
Transmissive (fixed)
Print speed (maximum)
Media sensor
The T208M has a 200 dpi printhead; the T212M has a 300 dpi
printhead for crisp, high quality text, barcodes and graphic images.
Both printers are designed for use with Tyco Electronics range of
TMS heat shrinkable wire marker sleeves and limited thermal
transfer printable pressure sensitive label products.
Reflective (fixed
Memory
T208M: 256KB SRAM and 512KB Flash
T212M: 512KB SRAM and 1MB Flash
Parallel (Centronics), serial (RS232),
and USB
Communication interface
Printer dimensions
T200 series printers are available with optional label spindle
accessory. It externally holds a roll of labels on 3" core for easy
dispensing.
200mm W x 247mm D x 171mm H
(7.9" W x 9.75" D x 6.75" H)
1.81 kg (4 lbs)
Printer weight
Shipping weight
4 kg (9 lbs)
Media Specifications
Maximum print width
Maximum media width
Minimum media width
Maximum media roll diameter
Media core diameter
Ribbon wind
104mm (4.09")
118mm (4.65")
28mm (1.12")
127mm (5.0")
25mm (1.0")
Ink side out
Product Order Code
T208M-PRINTER
Description
T208M thermal printer - standard
T208M thermal printer - cutter option
T212M thermal printer - standard
T212M thermal printer - cutter option
External label roll holder for T200 printers
T208M-C-PRINTER
T212M-PRINTER
T212M-C-PRINTER
T200-LABEL-SPINDLE
Only the T212M printer is recommended when printing size 3/32 (2.4mm) marker
sleeves.
Pinters
137
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Printers
T300 Series High performance, cost effective thermal transfer printers
The T300 series printers are high performance, yet cost effective
Printer specifications
thermal transfer printers with a 4.1" printhead. The rugged and
durable all metal construction makes them suitable for demanding
industrial and commercial environments. The enhanced memory
and 32 bit processor provide fast data processing and print
speeds. Optional accessories are available for added convenience
and efficiency.
Tyco Electronics
T308S-TTDS-054
T312M-TTDS-066
T312Z-TTDS-115
Print head width
104mm (4.09")
Print head resolution
T308S: 8dpmm (203 dpi)
T312M/T312S/T312Z*: 12dpmm (305 dpi)
T308S/T312M/T312S: 203mm/sec
(8 inch/sec)
Print speed (maximum)
The T308S and T308SN have a 200 dpi printhead for use with
the Tyco Electronics range of thermal transfer printable pressure
sensitive label products. The T308SN provides network capability
for real time connectivity with the printer. With such connectivity,
print jobs can be modified from any location over the Internet via
Web-based tools. The T308SN printer is also capable of sending
alerts via email enabled wired or wireless devices.
T312Z*: 154mm/sec (6 inch/sec)
Transmissive - adjustable
Reflective (fixed)
Media sensor
Memory
T308S/T312M/T312S: 6MB DRAM and
2MB Flash
T308SN: Additional 8MB flash memory
in PCMCIA socket
The 300 dpi printhead on the T312S, T312M and T312Z
produces crisp, high quality text, barcodes and graphic images.
The T312S and T312Z are for use with Tyco Electronics thermal
transfer printable pressure sensitive label products. The color-
coded operator cues and auto-calibration features make T312Z an
affordable yet easy to use label printing system. The T312M is
designed for use with Tyco Electronics TMS and HSI wire marker
sleeves, as well as thermal transfer pressure sensitive label
products.
T312Z*: 4MB DRAM and 1MB Flash
Communication interface
Printer dimensions
Bi-directional parallel (Centronics) and
serial (RS232)
T308S/T312M/T312S:
283mm W x 495mm D x 394mm H
(11.2" W x 19.5" D x 15.5" H)
T312Z*:
278mm W x 475mm D x 338mm H
(10.93" W x 18.69" D x 13.32" H)
T308S/T312M/T312S: 25kg (55 lbs)
T312Z*:15kg (32.4 lbs)
Printer weight
Shipping weight
T308S/T312M/T312S: 29kg (63 lbs)
T312Z*:22kg (49 lbs)
Media Specifications
Maximum print width
Maximum media width
Minimum media width
104mm (4.09")
114mm (4.48")
T308S/T312M/T312S: 20mm (0.76")
T312Z*: 25.4mm (1.0")
203mm (8.0")
Maximum media roll diameter
Media core diameter
Ribbon wind
76mm (3.0")
Ink side out
Product order code
T308S-PRINTER
Description
T308S thermal printer - standard
T308S thermal printer - cutter option
T308S-C-PRINTER
T308S-R-PRINTER
T308S thermal printer - internal rewind
option
T308SN-PRINTER
T312SN
T308S thermal printer - network capabilities
T312S thermal printer - network capabilities
T312S thermal printer - standard
T312S-PRINTER
T312S-C-PRINTER
T312S-R-PRINTER
T312S thermal printer - cutter option
T312S thermal printer - internal rewind
option
T312M-PRINTER
T312M thermal printer - standard
T312M-R-PRINTER
T312M thermal printer - internal rewind
option
T312Z-PRINTER
T312Z thermal printer - standard*
iPntesr
*Not available in Europe, Middle East or Africa
138
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
C. America: 52-55-5-729-0425
UK: 44-141-810-8967
Printers
T400 Series High performance and high speed thermal transfer printers
The T400 series printers are high performance thermal transfer
Printer specifications
printers with narrow to wide printheads suitable for variety of
mission critical applications. The rugged and durable metal
construction makes them a top choice for demanding industrial
and commercial needs.
Tyco Electronics
T408M-TTDS-015
T424S-TTDS-116
Print head width
T408M: 128mm (5.04")
T424S*: 81mm (3.2")
Print head resolution
Print speed (maximum)
Media sensor
T408M: 8dpmm (203 dpi)
T424S*: 23.5dpmm (600 dpi)
T408M: 305mm/sec (12inch/sec)
T424S: 102mm/sec (4inch/sec)
Transmissive and reflective
Reflective (fixed)
The enhanced memory and dual 32-bit processor provide
extremely fast data processing and print speeds. T400 series
printers are the best option for high volume and 24 hour duty
cycles. High speed of 12 inch/sec on T408M printers is well
suited for the applications in which labels are needed quickly,
either on demand or in batches. With the highest print resolution
of 600 dpi printhead on the T424S produces unmatched quality
of crisp, high quality text, barcodes and graphic images in a limited
space - ideal for printing linear and 2-dimensional barcodes.
Memory
16MB SDRAM and 4MB Flash
Communication interface
Bi-directional parallel (Centronics), serial
(RS232), and USB 2.0
Printer dimensions
T408M:
The T408M is designed for use with Tyco Electronics TMS and
HSI wire marker sleeves, as well as thermal transfer pressure
sensitive label products. The T424S is ideal for use with Tyco
Electronics thermal transfer printable pressure sensitive label
products.
283.2mm W x 495.3mm D x 393.7mm H
(11.15" W x 19.5" D x 15.5" H)
T424S*:
263.5mm W x 495.3mm D x 393.7mm H
(10.37" W x 19.5" D x 15.5" H)
T408M: 25kg (55 lbs)
Printer weight
T424S*:22.7kg (50 lbs)
T408M: 29kg (63 lbs)
Shipping weight
T424S*: 27kg (59 lbs)
Media Specifications
Maximum print width
T408M: 128mm (5.04")
T424S*: 81mm (3.2")
T408M: 140mm (5.51")
T424S*: 114mm (4.5")
T408M: 40mm (1.57")
T424S*: 20mm (0.76")
203mm (8.0")
Maximum media width
Minimum media width
Maximum media roll diameter
Media core diameter
Ribbon wind
76mm (3.0")
Ink side out
Product order code
T408M-PRINTER
Description
T408M thermal printer - standard
T408M-R-PRINTER
T408M thermal printer - internal rewind
option
T424S-PRINTER
T424S thermal printer - standard*
*Not available in Europe, Middle East or Africa
T400 Series printers are available with wider printhead configurations for
speciality identification applications. Contact Tyco Electronics for such
product requirements.
Pinters
139
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Printers
T612M–DS Double sided thermal transfer printer
Specifically designed by Tyco Electronics, the T612M-DS printer
Printer specifications
Tyco Electronics
answers a common need in heat-shrinkable wire and cable
identification markers: single-pass printing onto both the front and
back side of the markers simultaneously. Specifically developed
and modified by Tyco Electronics for this application, the T612M-
DS is a high duty cycle, industrially robust thermal transfer printer.
It will print onto the complete range of TMS System Six heat-
T612M-TTDS-098
128 mm (5.04")
Print head width
Print head resolution
Print speed (maximum)
12 dpmm (304 dpi)
50 to128 mm per second
(2 [recommended] to 5 inches per
second)
3
1
Media sensor
Transmissive and gap
shrinkable markers in all sizes from /32" (2.4 mm) to 2 /4"
(57.2 mm). The data printed onto the two sides of each marker
can be identical or different, same side up or flipped.
Memory
12MB DRAM and 1 MB flash
Communication interface
Parallel (centronics) and serial
(RS232/422)
Printer dimensions
559 mm W x 432 mm D x 508 mm H
(22" W x 17" D x 20" H)
38 kg (84 lbs)
Printer weight
Shipping weight
51 kg (112 ibs)
Media specifications
Maximum print width
Maximum media width
Maximum media roll diameter
Media core diameter
Ribbon wind
112mm (4.4")
117 mm (4.625")
254 mm (10.0")
26 mm (3.0")
Ink side out
Product order code
Description
T612M-DS-PRINTER
Tyco Electronics T612M-DS thermal
printer – standard
iPntesr
140
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
C. America: 52-55-5-729-0425
UK: 44-141-810-8967
Printers
AM6310 Heavy duty dot matrix printer
Specifically designed by Tyco Electronics, the AM6310 is a heavy
Printer specifications
Tyco Electronics
Print head
duty industrial dot matrix printer with a high impact 24-pin print
head. Automatic media thickness detection and a high impact
print head make the AM6310 the best industrial printer available
for heavy gauge wire marker and tag materials, and the 24-pin
print head produces high quality text printing with fast print
speeds. Standard AM6310 printer models are designed to print
on Tyco Electronics HSI wire marker sleeves and dot matrix
pressure sensitive label and tag products. AM6310D models are
equipped with dual tractor mechanism necessary for guiding TMS
sleeve product range. Such dual tractor models can also print on
HSI and dot matrix label and tag product range.
TTDS-002
24-pin high-impact dot matrix
Max. high-speed draft: 600 cps at 12 cpi
Letter quality: 160 cps at 12 cpi
Bi-directional, logic seeking
Print speed
Print direction
Control panel
LCD, 12 keys, select-dial and
quick access setup menu
Feed mechanism
Memory
Tractor (single or dual)
2 MB flash
Input buffer
80 KB
Communication interface
Parallel port (centronics 36-pin) and
serial port (RS232/DB25)
Printer dimensions
Printer weight
483 mm W x 427 mm D x 208 mm H
19.0" W x 16.0" D x 8.2" H
18.1 kg (40 lbs)
Media specifications
Maximum print width
Maximum media width
Minimum media width
279 mm (11.0")
305 mm (12.0")
25 mm (1.0")
Product order code
Description
AM6310-110V
Tyco Electronics AM6310 dot matrix
printer – standard 110 V
AM6310-230V
AM6310D-110V
AM6310D-230V
Tyco Electronics AM6310 dot matrix
printer – standard 230 V
Tyco Electronics AM6310 dot matrix
printer – dual tractor 110 V
Tyco Electronics AM6310 dot matrix
printer – dual tractor 230 V
New at Tyco Electronics. Ultra clean dot martrix labels!
Process Improvement - Web Cleaning
To address reported issues with our dot matrix label stock, we sought out equipment
that would help us to remove containments from the label surface and imrpove overall
printability. This contact cleaning/tacky roll system was integrated into our rewind
tables to remove small to microscopic particles down to 1 micron from the label sur-
face. Flood coating the web with black ink showed a cleaning efficiency that was
beyond our expectations.
This 12" roller vacuum style construction helps to reduce waste, imrpove product
quality and save production loss. Containments tend to attach themselves to the labels
surface due to static electricity and moisture which require stringent cleaning tech-
niques. Since implementing the web cleaners, we have seen huge improvements in the
cleanliness of our label stock which has drastically reduced the potential for printing
issues.
Pinters
141
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Printers
LMS6000 Laser Marking System
The LMS6000 Laser Marking System is a fully functional, closed-
Printer specifications
loop, Ytterbium doped fiber laser system that is fact, efficient,
flexible and reliable. The LMS6000 system comes integrated with
state-of-the-art software and transport systems. These integrated
systems are capable of marking on a variety of flat label materials.
Operating power
85-220V, 50-80Hz - laser
110V, 60 Hz - fume extractor
Maximum output power
Power consumption
Operating temperature
Humidity non-condensing
Weight:
10 watts laser power, 0.5mJ
350W Laser only
10-40˚C
Optional direct marking module provides the capability to mark on
specific metallic and plastic components.
30-85%
42KG
The system comes complete with a fume extraction system to
meet the strictest of emission and safety regulations. If validation is
not required, the system can be fitted with an optional cutter used
to cut the labels as they exit the marking chamber.
Laser type
Ytterbium doped fiber laser, pulsed
Q-switched
Cooling system
Beam dimensions
Wavelength
Air cooled
TEM-00 (M2<1.4), Plano Spherical 163
1062nm
Pulse width
100nsec
Pulse frequency
Pilot laser
20-80MHz
650nm/1mW
Laser protection class
Marking area
Resolution
4
130mm x 130mm
725-1000 dpi
Beam attenuator
Exhaust
Galvo Mirrors, Safety shutter included
Integrated fume extractor with Rheostat
control, filter layers and exhaust indicators
Software specifications
Operating system
Wndows 2000 and XP, Pentium IV, 500-Mhz,
150 MB hard drive, USB Interface
Graphics
All standard dimensional, PLT, DXF, BMP,
JPG,PCX, WMF, EPS, TIFF. all elements can be
scaled, moved, grouped or mirrored
Barcodes
1D - Code 39, Code 93, Code 128, Data
Matrix - ECC200, QRCode
Characters
All true type fonts under Windows, filled, out
lined, laser specific double or triple line fonts.
All fonts can be scaled or wobbled stretching,
compressing, circular arc
Integration capabilities
Industry standard ERP/MRP systems,
databases and programs
Product order code
LMS6000-130
Description
Tyco Electronics LMS6000 laser - standard
LMS6000-XYZ30
Direct part marking module
300mm x 300mm
LMS6000-XYZ80
LMS6000-XYZ100
LMS6000-FE-110V
Direct part marking module
800mm x 800mm
Direct part marking module
1000mm x 1000mm - fume extractor unit
Integrated fume extractor system
Verifier/Validator
Part No. LMS6000-VRF-100, integrated data
matrix verifier/validator
LMrakingSytems
142
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
C. America: 52-55-5-729-0425
UK: 44-141-810-8967
Printers
LMS-9000 Laser Marking System
The LMS-9000 laser marker is a low maintenance laser marking
system designed for high volume users. It is a highly automated sys-
tem including cutting to length, postmark rewinding and double
sided, one step sleeve marking.
Integrated with WinTotal marker sleeve/label marking software, it is
designed for Tyco Electronics wire identification sleeves and
selected labels.
Features and benefits
ꢀ
Simultaneous double-sided laser marking option for marker
sleeves saves considerable time and eliminates any margin
for error
ꢀ
Optional handling system designed to handle several
Tyco Electronics products
ꢀ
Laser marking and cutting for kitting in one integrated step
eliminates post print cutting and kitting
ꢀ
Virtually no product wastage during marking, thanks to a
state of the art product recognition and jogging system
ꢀ
Optional scoring and marking feature for label products
ꢀ
Modular design for easy placement and re-installation
ꢀ
Fully integrated software and hardware
ꢀ
On screen diagnostics
ꢀ
Meets all relevant US and European laser equipment standards
ꢀ
Laser parameters pre-set and software controlled
Tyco Electronics also offers a pre-printing service to customers
who need high quality, durable, permanent laser markers, yet do
not want to invest in the purchase of LMS-9000 equipment at
this time. All pre-printed laser markers, labels or tags are produced
to out exacting quality, manufacturing standards and meet
applicable mark permanence specifications. A variety of System
Six and HSI products including TMS-SCE, D-SCE, HT-SCE, HL and
HLX are available for pre-print base materials along with many
label materials.
Product order code
Tyco Electronics
LMS-9000
Description
TTDS-057
Tyco Electronics LMS-9000 laser – standard
*Please contact your local Tyco Electronics represen-
tative for product configuration per your application.
See page 168 for Laser Markable Label Materials and ordering information.
Please contact your local Tyco Electronics representative to find
out more about our laser pre-print services.
LMarkingSytems
143
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Accessories
BSC-100 Barcode scanners
Tyco Electronics BSC-100 barcode scanners are cost effective, full
featured, and fast barcode readers. These combine high image
transfer speed with exceptional image quality. Their omni-
directional reading capability allows fast and easy reading of EAN-
UCC composite codes, 2-dimensional (PDF417, datamatrix) and
Postal codes. It comes with USB connection ready to "point and
shoot" at a complicated looking 2-dimensional barcode or a simple
linear code. It can be used in a wide range of commercial and
industrial applications within government/postal, military,
healthcare, logistics, manufacturing and retail sectors.
General specifications
Symbologies
2 Dimensional:
PDF417, MicroPDF417, MaxiCode,
DataMatrix, QR Code, Aztec, Aztec Mesas,
Code 49 and EAN-UCC composite
Linear:
Codabar, Code 39, Interleaved 2 of 5,
Code 93, Code 128, UPC, EAN, RSS, and
Codablock
Postal:
Postnet, Planet Code, British Post,
Canadian Post, Japanese Post, KIX
OCR fonts:
OCR-A, OCR-B
Power Requirements
Physical Dimensions
4.5 - 12 VDC - powered through USB port
81mm W x 135mm L x 157mm H
(3.2" W x 5.3" L x 6.2" H)
184.3g (6.5 oz)
Weight
Product order code
Description
BSC-100
Barcode scanner - standard
cSndIamegsr
144
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
in inches are italicized.
Specifications subject
to change.
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
Accessories
BSC-200 Hand held imager
The BSC-200 imager is a portable hand held solution for reading
both linear bar codes and 2D symbols. The BSC-200 reads a wide
range of bar code symbols created from a variety of printing and
marking methods.
Imager specifications
Imager dimensions
33mm H x 46mm W x 109mm D
(1.3” H x 1.8” W x 4.3” D)
Imager weight:
71.5 g (2.5 oz) not including cable
Handle dimensions
96.5 mm H x 30 mm W x 36 mm D
(1.8” H x 1.2” W x 1.4”D)
• Read Area:
The BSC-200 imager’s advanced “dual decode zone”
technology allows the user to easily capture 2D symbols and lin-
ear bar codes at varying distances from 2” to 20” (50.8mm to
508mm). This wide read area allows the symbols to be decod-
ed fast and reliably.
Handle weight:
59.8 g (1.2 oz) not including cable
Environmental
Operating temperature
Storage temperature
Humidity
0˚C to 40˚C (32˚F to 104˚F)
-20˚C to 60˚C (-4˚F to 140˚F)
5% to 90% (non-condensing)
Fast processing speeds also add to the BSC-200’s ability
to acquire and decode multiple symbologies, with no adjust-
ment of the imager required.
Electrical
• Ease of use:
Power requirements
5 VDC (mA)
BSC-200 imagers feature point-and-click targeting with
a red laser spot to quickly center the symbol in the field
of view. Beeper, vibrator and multi-purpose LEDs provide real-
time feedback to signal successful decoding.
Typical:
Peak:
Sleep
310
310
3
• Applications:
Read Parameters
Pitch
The BSC-200 imager is a strong reading solution for
applications needing to read linear bar codes and 2D
symbologies with a portable handheld device.
60˚C (front to back)
Skew
60˚
Tilt
360˚
• System Integration:
BSC-200 imagers are available in 2 configuration options:
Focal Range
Rotational Tolerance
Print Control Resolution
50.8mm to 508mm (2” to 20”)
180˚
- Batch: A wireless way to collect thousands of decoded sym-
bols for later download, capable of performing more than
4000 reads from a single battery charge and buffers a mini-
mum of 1 MB of data in nonvolatile memory.
25% (bar codes), 35% (PDF417),
absolute dark/light reflectance differential
measure at 650 nm
Target Beam
Visible laser diode at 630 nm, Class 2
(battery purchased separately)
Ambient Light Immunity
Shock
Sunlight, up to 9,000’ candles 96,890 lux
- Cabled: Cabled units include USB, RS-232.
(RS-232 available through the purchase of optional
connector kit - contact Tyco Electronics)
Withstands multiple drops of 2m (6.5’)
to concrete
Product Order Code
• Symbologies:
BSC-200
Hand held imager
The BSC-200 automatically discriminates between all
major 2D matrix and linear bar code symbologies, and offers
time stamp capabilities for logging data. Symbologies include:
2D Symbologies:
- MaxiCode
- QR Code
- Aztec Code
- Data Matrix (ECC 200)
Stacked Symbologies:
- UCC Composite
- PDF417 (with Macro support)
- Micro PDF417
Linear Bar Codes:
- Codabar
- Codablock F
- GoCode
- RSS
- Code 93
- Code 39
- Code 128
- Standard postal codes
- UPC/EAN/JAN - Int 2 or 5
• BSC-200 Accessories:
ScndImagers
- Long-life 1300 mA lithium-ion battery
- Two-bay battery charger
- RS-232 kit
145
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
C. America: 52-55-5-729-0425
UK: 44-141-810-8967
Accessories
VLD-100 Hand held imager/validator
The VLD-100 Imager/Validator is optimized to read both linear bar
Imager specifications
codes and 2D symbols. It is an aggressive hand held imager/val-
idator for decoding symbols on low contrast substrates such as
metal, plastic, rubber, polyester, vinyl, Kapton, polyvinyl
Imager dimensions
33mm H x 46mm W x 109mm D
1.3”H x 1.8”W x 4.3” D)
Imager weight:
71.5 g (2.5 oz) not including cable
fluoride and glass. The VLD-100 can read marking methods such
as dot peen, thermal transfer and laser/chemical etch. Containing
custom optics and Tyco Electronics' decode algorithms, the VLD-
100 combines the decoding power of Tyco Electronics'popular
smart camera, VRF-100, into a portable hand held device.
Handle dimensions
96.5 mm H x 30 mm W x 36 mm D
(1.8” H x 1.2” W x 1.4”D)
Handle weight:
59.8 g (1.2 oz) not including cable
Environmental
Operating temperature
Storage temperature
Humidity
• Optical Options:
0˚C to 40˚C (32˚F to 104˚F)
-20˚C to 60˚C (-4˚F to 140˚F)
5% to 90% (non-condensing)
The VLD-100 hand held imager/validator is available in:
- The high resolution version is custom designed to
optimize resolution for reading small 2D symbols.
• LightRay Optics Accessory:
Tyco Electronic’s LightRay Optics solution further enhances its
ability to read directly marked parts. By directing the illumina-
tion toward the symbol at off-axis angles, the LightRay Optics
increase symbol contrast and filters out texture noise. The
LightRay Optics are designed so that it is positioned at the cor-
rect focal distance and angle. No training is needed to find the
best angles for reading low contrast symbols. Either optical
accessory easily attaches on to the end of the VLD-100. Two
options are available: the LightRay Optics 100 Series and the
LightRay Optics 200 Series.
Electrical
Power requirements
5 VDC (mA)
Typical:
Peak:
Sleep
310
310
3
Read Parameters
Pitch
60˚C (front to back)
Skew
60˚
Tilt
360˚
Focal Range
Rotational Tolerance
Print Control Resolution
25 to 508 mm (1” to 20”)
180˚
25% (bar codes), 35% (PDF417),
absolute dark/light reflectance differential
measure at 650nm
LightRay Optics 100 Series
generates off-axis diffuse
illumination
LightRay Optics 200 Series
generates dark field
illumination
Target Beam
Visible laser diode at 630 nm, Class 2
Ambient Light Immunity
Shock
Sunlight, up to 9,000’ candles 96,890 lux
Withstands multiple drops of 2m (6.5’)
to concrete
• Ease of Use:
The VLD-100 features point-and-click targeting with a red laser
spot to quickly center the symbol in the field of view. Beeper,
vibrator and multi-purpose LEDs provide real-time feedback to
signal successful decoding.
Product Order Code
VLD-100
Hand held imager/validator
• Applications:
The VLD-100 provides outstanding performance validating
challenging 2D codes.
Automotive and Aerospace: reads codes marked on steel, iron,
aluminum, rubber, and glass parts by laser etch, dot peen, metal
stamp, and thermal transfer products.
Electronics: reads codes laser etched on printed circuit boards
and components.
Department of Defense: reads UID codes on a variety of sub-
strates. Software enables it to validate UII code format for
suppliers and constructs the UID string for DoD operators
• System Integration:
All Tyco Electronics imagers are available in 2
configuration options:
Batch: A wireless way to collect thousands of decoded symbols
for later download, capable of performing more than 4000 reads
from a single battery charge and buffer a minimum of 1 MB of data
in non-volatile memory.
- Cabled: Cabled units include USB, RS-232.
(RS-232 available through the purchase of optional
connector kit - contact Tyco Electronics)
• Symbologies:
The VLD-100 imager/validator reads all standard linear
bar codes plus:
2D Symbologies:
- Data Matrix (ECC 0200) - QR Code
-
cSndIamegsr
- MaxiCode
- Aztec Code
Stacked Symbologies:
- UCC Composite
- Micro PDF417
- PDF417 (Macro Support)
146
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Accessories
VRF-100 Production ready data matrix verifier
The VRF-100 is an ISO/IEC 15415 and AS9132-compliant Data
Imager specifications
Matrix verifier for use in production environments. The VRF-100
helps to ensure that your marks will be verified accurately every
time.Unlike most verifiers that are mounted on stands designed
for the lab environment, the VRF-100 Verifier is a fully-contained,
compact device that is easy to integrate into the production
environment. The VRF-100 Verifier is factory-calibrated to specific
traceability standards with a fully-contained housing, making it
easy to integrate into existing applications. No on-site calibration
of optics or lighting is needed to verify marks with the Verifier.
Simply present the part to the Verifier, trigger, and receive the
symbol quality report.
Imager dimensions
307 mm H x 127 mm W x 122 mm D
(12.1” H x 5.0” W x 4.8” D )
Environmental
Operating Temperature
Storage Temperature
Humidity
0˚C to 40˚C (32˚F to 104˚F)
-50˚C to 75˚C (-58˚F to 167˚F)
Up to 90% (non-condensing)
Electrical
Power Requirements
Input, 10 to 28 VDC, 200 mV- P-P max.
ripple, 270 mA at 24 VDC (typ. CMOS),
333 mA at 24 VDC (typ. CCD)
Trigger, New Master, Input 1: (Optoisolated)
5 to 28 VDC rated (12 mA at 24 VDC)
Outputs 1/2/3: (Optoisolated) 1 to 28
VDC rated, (I CE < 100 mA at 24 VDC,
current limited by user)
• Production-Ready
It is the first 2D verifier designed specifically for use in a produc-
tion environment. Its compact, lightweight design makes the
Verifier easy to integrate into production processes. A self-
contained, factory-calibrated system with flexible mounting
allows the Verifier to be adapted to any application quickly and
easily.
Product Order Code
VRF-100*
Data matrix verifier
• Calibrated System
*not available in Europe, Middle East, or Africa
It provides the user with a ready-to-use, ISO/IEC 15426-2
calibrated system. Simply present the part, trigger, and the
Verifier will output the results. The user is not required to focus
the optics, set the light angles. Fixed optics and pre-set illumina-
tion angles make the verifier consistent, reliable and accurate.
• Illumination Chamber
The Verifier’s fully-enclosed illumination chamber provides the
controlled lighting environment for accurate, repeatable verifica-
tion. The chamber is specifically engineered to produce the
illumination angles required by the ISO/IEC 15415 standard.
• VRF Software
Offers complete symbol verification reports in a variety of
formats: PDF, CSV, HTML and RTF.
• ISO/ICE 15426-2 Certified
The Verifier is ISO/IEC 15426-2 certified. It is precisely
engineered to meet rigorous verification standards, ensuring
accurate and consistent verification.
• ISO/IEC 15415 Compliant
The Verifier provides verification of 2D symbols for
parameters:
- Symbol contrast
- Modulation
- Axial non-uniformity
- Grid non-uniformity
- Fixed pattern damage
- Reference decode
algorithms
- Unused error
- Print growth (ungraded) correction
• AS9132
Verifies Data Matrix symbols in accordance with the
parameters called out in the AS9132 standard:
- Quiet Zone
- Cell fill
- Dot center offset
- Symbol type
- Dot ovality
- Contrast
- Angle of distortion
• MIL-STD 130
Requires verification of Data Matrix symbols to both ISO/IEC
15415 and AS9132 standards as required by the MIL STD
130 specification.
ScndImagers
147
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Ribbons
Thermal transfer ribbons
General specifications
Ribbon width
RJS-4RPSCE
110 mm (4.33 inches)
Tyco Electronics RJS-4RPSCE
is a high durability black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics TMS-SCE, RPS and
HL cable markers wire marker
sleeve products. For reliable
print performance and durabili-
ty use with Tyco Electronics
recommended compatible
printers.
Ribbon length
300 meters (984 feet)
Ink
Resin
Standard color
Ribbon wind direction
Compatible printers
Compatible materials
Black
Ink side out
T308S, T312M, T312Z**, T408M, T612M-DS, T312S
TMS-SCE, RPS, SB, HL, HS, HC
**Not available in Europe, Middle East or Africa
Ordering information
Product order code
TMS-RJS-RIBBON-4RPSCE
Description
Tyco Electronics 4RPSCE thermal transfer ribbon for T308S, T312S, T312M, T312Z**,
T408M and T612M-DS printers
**Not available in Europe, Middle East or Africa
101-4RPSCE
General specifications
Ribbon width
110 mm (4.33 inches)
74 meters (242 feet)
Resin
Tyco Electronics 101-4RPSCE
is a high durability black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics TMS-SCE, RPS wire
marker sleeve products and SB
self-laminating labels. For
Ribbon length
Ink
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T208M, T212M
TMS-SCE, RPS, SB
Ordering information
Product order code
Description
reliable print performance and
durability use with Tyco
Electronics recommended
compatible printers.
TMS-101-RIBBON-4RPSCE
Tyco Electronics 4RPSCE thermal transfer ribbon for T208M and T212M printers
General specifications
Ribbon width
RJS-4HT
110 mm (4.33 inches)
300 meters (984 feet)
Resin
Tyco Electronics RJS-4HT is a
high temperature black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics HT-SCE high
temperature wire marker
sleeve products. For reliable
print performance and
Ribbon length
Ink
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T312M, T408M, T612M-DS
HT-SCE, HTCM-SCE-TP (T312M only)
Ordering information
Product order code
Description
TMS-RJS-RIBBON-4HT
iRobns
durability use with Tyco
Electronics recommended
compatible printers.
Tyco Electronics 4HT thermal transfer ribbon for T312M, T408M and T612M-DS printers
148
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Ribbons
Thermal transfer ribbons
General specifications
Ribbon width
101-4HT
110 mm (4.33 inches)
Tyco Electronics 101-4HT is a
high temperature black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics HT-SCE high
temperature wire marker
sleeve products. For reliable
print performance and
Ribbon length
74 meters (242 feet)
Resin
Ink
Standard color
Ribbon wind direction
Compatible printers
Compatible materials
Black
Ink side out
T208M, T212M
HT-SCE
Ordering information
Product order code
Description
TMS-101-RIBBON-4HT
durability use with Tyco
Electronics recommended
compatible printers.
Tyco Electronics 4HT thermal transfer ribbon for T208M and T212M printers
General specifications
Ribbon width
1910
110 mm (4.33 inches)
210 meters (689 feet)
Resin/wax
Tyco Electronics 1910 is a
high durability high contrast
resin/wax thermal transfer
ribbon tested and approved for
use on the HLX-zero halogen
cable marker tape and the
HXTM-FB rail tags. For reliable
print performance use with
Tyco Electronics
Ribbon length
Ink
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Tyco Electronics
Ink side out
T408M
HLX, HXTM-FB
TTDS-080
Ordering information
Product order code
Description
1910-RIBBON-4T300
recommended printers.
Tyco Electronics 1910 thermal transfer ribbon for T408M printers
General specifications
Tyco Electronics
Ribbon width
1966 - RIBBON
TTDS-099
Tyco Electronics
100 mm (3.9 inches)
1966-RIBBON is an ultra- high
durability black resin thermal
transfer ribbon tested and
approved for use on Tyco
Electronics HX, HX-SCE and
D-SCE wire marker sleeves as
well as CM-SCE-TP and HLX
cable markers. See right for
compatible materials. For
reliable print performance and
durability use with Tyco
Ribbon length
300 meters (984 feet)
Ink
Resin
Standard color
Black
Ribbon wind direction
Compatible printer
Compatible materials
Ink side out
T312M
CM-SCE-TP, D-SCE, HLX, HS, HX, HXTM-FB, HX-SCE, HL
Ordering information
Product order code
Description
1966-RIBBON
Tyco Electronics 1966 thermal transfer ribbon for T312M
Electronics recommended
compatible printers.
General specifications
Ribbon width
T200-RIBBON-1966
100 mm (3.9 inches)
74 meters (242 feet)
Resin
Tyco Electronics T200-
Ribbon length
RIBBON-1966 is an ultra- high
durability black resin thermal
transfer ribbon tested and
approved for use on Tyco
Electronics HX-SCE wire
marker sleeves. See right for
compatible materials. For
reliable print performance and
durability use with Tyco
Ink
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T212M
HX-SCE, D-SCE, HLX-NEL
Ordering information
Product order code
Description
T200-RIBBON-1966
Ribons
Tyco Electronics 1966 thermal transfer ribbon for T212M
Electronics recommended
compatible printers.
149
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Ribbons
Thermal transfer ribbons
1330-0606
General specifications
Ribbon width*
110 mm (4.33 inches)
Tyco Electronics 1330-0606
is a high durability black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics thermal transfer
printable pressure sensitive
labels. See right for compatible
materials. For reliable print per-
formance and durability use
with Tyco Electronics
Ribbon length
300 meters (984 feet)
Wax/Resin
Ink
Standard color
Ribbon wind direction
Compatible printers
Compatible materials
Black
Ink side out
T308S, T312M, T312S, T312Z**, T408M
SB, NC, WP, HW, MP, HM, MV
* Available in additional sizes by custom quotation
**Not available in Europe, Middle East or Africa
Ordering information
Product order code
recommended compatible
printers.
1330-0606-10
Description
Tyco Electronics RHQ thermal transfer ribbon for all T300 and T400 printers
General specifications
Ribbon width*
1330-0607
110 mm (4.33 inches)
Tyco Electronics 1330-0607
is a high durability black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics thermal transfer
printable pressure sensitive
labels. See right for compatible
materials. For reliable print per-
formance and durability use
with Tyco Electronics
Ribbon length
300 meters (984 feet)
Ink
Resin
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T308S, T312M, T312S, T312Z**, T408M
CP, HM, HMM, HPK, HW, MP, MV, NC, PVF, TN, TTP, WP, WV, TP, HLTM, SP
* Available in additional sizes by custom quotation
**Not available in Europe, Middle East or Africa
Ordering information
Product order code
1330-0607-10
recommended compatible
printers.
Description
Tyco Electronics RHD thermal transfer ribbon for all T300 and T400 printers
1330-0607-T200
General specifications
Ribbon width
110 mm (4.33 inches)
Tyco Electronics 1330-0607-
T200 is a high durability black
resin thermal transfer ribbon
tested and approved for use on
Tyco Electronics thermal trans-
fer printable pressure sensitive
labels. See right for compatible
materials. For reliable print
performance and durability
use with Tyco Electronics
recommended compatible
printers.
Ribbon length
74 meters (242 feet)
Ink
Resin
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T208M, T212M
HM, HMM, HW, MP, MV, NC, TN, TTP, WP, WV,HPK
Ordering information
Product order code
Description
1330-0607-T200
Tyco Electronics RHD thermal transfer ribbon for T208M and T212M printers
General specifications
Ribbon width*
1330-0619
110 mm (4.33 inches)
300 meters (984 feet)
Resin
Tyco Electronics 1330-0619
is a high temperature black
resin thermal transfer ribbon
tested and approved for use on
Tyco Electronics thermal trans-
fer printable Kapton® labels.
See right for compatible mate-
rials. For reliable print perform-
ance and durability use with
Tyco Electronics recommend-
ed compatible printers.
Ribbon length
Ink
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T308S, T312M, T312S, T312Z**, T408M
T1K, T2K, TSK, T2Y, KTT
* Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa
Ordering information
Product order code
iRobns
1330-0619-10
Description
Tyco Electronics RHT thermal transfer ribbon for all T300 and T400 printers
150
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Ribbons
Thermal transfer ribbons
General specifications
Ribbon width*
1330-0600
110 mm (4.33 inches)
Tyco Electronics 1330-0600
is a high quality black wax ther-
mal transfer ribbon tested and
approved for use on Tyco
Electronics thermal transfer
printable paper labels. See
right for compatible material.
For reliable print performance
and durability use with Tyco
Electronics recommended
compatible printers.
Ribbon length
300 meters (984 feet)
Ink
Wax
Standard color
Ribbon wind direction
Compatible printers
Compatible materials
Black
Ink side out
T308S, T312M, T312S, T312Z**, T408M
EP
* Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa
Ordering information
Product order code
1330-0600-10
Description
Tyco Electronics RS thermal transfer ribbon for all T300 and T400 printers
General specifications
Ribbon width
1330-0600-T200
110 mm (4.33 inches)
74 meters (242 feet)
Wax
Tyco Electronics 1330-0600-
T200 is a high quality black
wax thermal transfer ribbon
tested and approved for use on
Tyco Electronics thermal trans-
fer printable paper labels. See
right for compatible material.
For reliable print performance
and durability use with Tyco
Electronics recommended
compatible printers.
Ribbon length
Ink
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T208M, T212M
EP
Ordering information
Product order code
Description
1330-0600-T200
Tyco Electronics RS thermal transfer ribbon for T200 printers
General specifications
Ribbon width*
3300
110 mm (4.33 inches)
Tyco Electronics 3300 is a
high durability black resin ther-
mal transfer ribbon tested and
approved for use on Tyco
Electronics thermal transfer
printable pressure sensitive
labels. See right for compatible
materials. For reliable print
performance and durability
use with Tyco Electronics
recommended compatible
printers.
Ribbon length
300 meters (984 feet)
Ink
Resin
Standard color
Black
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T308S, T312S, T312M, T312Z, T408M
PVF, TTVF
* Available in additional sizes by custom quotation
Ordering information
Product order code
1330-3300-10
Description
Tyco Electronics 3300 thermal transfer ribbon for all T300 and T408M printers
General specifications
Ribbon width
T300–WH
110 mm (4.33 inches)
White resin based ribbons are
available to print on Tyco
Electronics TMS-SCE wire
marker sleeve products. For
print performance and
durability use with Tyco
Electronics Electronics
recommended compatible
printers.
Ribbon length
300 meters (984 feet)
Ink
Resin
Standard color
White
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T308S, T312S, T312Z**, T312M and T-408M
TMS-SCE (T312M only), CP, TTP
**Not available in Europe, Middle East or Africa
Ordering information
Ribons
Product order code
T300–RIBBON–WH
Description
Tyco Electronics thermal transfer ribbon for T300 and T400 printers
151
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Ribbons
Thermal transfer ribbons
General specifications
Ribbon width
T200–WH
110 mm (4.33 inches)
White resin based ribbons are
available to print on Tyco
Electronics TMS-SCE wire
marker sleeve products. For
print performance and
durability use with Tyco
Electronics recommended
compatible printers.
Ribbon length
70 meters (230 feet)
Ink
Resin
Standard color
Ribbon wind direction
Compatible printers
Compatible materials
White
Ink side out
T208M, T212M
TMS-SCE (T212M only) HM, MP, MV, TTP
Ordering information
Product order code
Description
T200-RIBBON-WH
Tyco Electronics thermal transfer white ribbon for T200 printers
General specifications
Ribbon width
T300–WH–4HT
114 mm (4.49 inches)
300 meters (984 feet)
Resin
White resin based ribbons are
available to print on Tyco
Electronics HT-SCE wire
marker sleeve products. For
print performance and
durability use with Tyco
Electronics recommended
compatible printers.
Ribbon length
Ink
Standard color
White
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T312M
HT-SCE
Ordering information
Product order code
Description
T300–RIBBON–WH–4HT
Tyco Electronics thermal transfer white ribbon for all T308M. T312M and T408M printers
General specifications
Ribbon width
T200–WH–4HT
110 mm (4.33 inches)
74 meters (242 feet)
Resin
White resin based ribbons are
available to print on Tyco
Electronics HT-SCE wire
marker sleeve products. For
print performance and
durability use with Tyco
Electronics recommended
compatible printers.
Ribbon length
Ink
Standard color
White
Ribbon wind direction
Compatible printers
Compatible materials
Ink side out
T212M
HT-SCE
Ordering information
Product order code
Description
T200–RIBBON–WH–4HT
Tyco Electronics thermal transfer white ribbon for T200 printers
General specifications
Ribbon width
RHCA
110 mm (4.33 inches)
RHCA resin based ribbons are
specifically designed to print
on polyester or metalized
polyester Tyco Electronics
label products. For print
performance and durability
use with Tyco Electronics
recommended compatible
printers. It is not suitable to
print on paper or
Ribbon length
91 meters (300 feet)
Ink
Resin
Standard color
Red, Blue and Green (see ordering information below)
Ink side out
Ribbon wind direction
Compatible printers
Compatible materials
T308S, T312M, T312S, T312Z** and T408M
CP, HW, HM, HPK, HMM, MP, MV, PVF, WP, WV
**Not available in Europe, Middle East or Africa
Ordering information
Product order codes
iRobns
1330-0620-10 (Red)
1330-0621-10 (Blue)
1330-0622-10 (Green)
self-laminating products.
Description
Tyco Electronics thermal transfer color ribbon for all T300 and T400 printers
152
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Ribbons
Thermal transfer ribbons
General specifications
Ribbon width
RHCB
110 mm (4.33 inches)
RHCB wax-resin based
ribbons are specifically
designed to print on paper.
For print performance and
durability use with Tyco
Electronics recommended
compatible printers.
Ribbon length
300 meters (9840 feet)
Ink
Wax-Resin
Standard color
Ribbon wind direction
Compatible printers
Compatible materials
Red, Blue and Green (see ordering information below)
Ink side out
T308S, T312M, T312S, T312Z** and T408M
EP
* *Not available in Europe, Middle East or Africa
Ordering information
Product order codes
1330-0630-10 (Red)
1330-0631-10 (Blue)
1330-0632-10 (Green)
Description
Tyco Electronics thermal transfer color ribbon for all T300 and T400 printers
Ribons
153
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Ribbons
Dot matrix ribbons
General specifications
Ink
RIBBON A
Standard
Tyco Electronics RIBBON A is a
permanent black ink dot matrix
ribbon tested and approved for
use on Tyco Electronics TMS-
SCE wire marker sleeves and
RMK-6 products on the
Standard color
Black
Compatible printer
Compatible materials
LQ870
CM-SCE, D-SCE, RMK-6, RPS, TMS-SCE
Ordering information
Product order code
Description
TMS-SYSTEM-SIX-RIBBON-A
LQ870 printer. See right for
compatible materials.
Tyco Electronics dot matrix Ribbon A for LQ870 printer
General specifications
Ink
QUICK-DRY LQ870
RI Quick-Dry
Tyco Electronics
Standard color
Black
QUICK-DRY LQ870 is a quick
drying indelible black ink dot
matrix ribbon tested and
approved for use on Tyco
Electronics dot matrix printable
pressure sensitive labels on the
LQ870 printer. See right for
compatible materials.
Compatible printer
Compatible materials
LQ870
C, DMVF, E, HLTM, K, M, NMX, PV, TW
Ordering information
Product order code
Description
1330-0037-00
Tyco Electronics Quick-Dry dot matrix ribbon for LQ870 printer
iRobns
154
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Ribbons
Dot matrix ribbons
General specifications
Ink
STANDARD AM6310
Standard
Tyco Electronics
Standard color
Black
STANDARD AM6310 is a
permanent black ink dot matrix
ribbon tested and approved for
use on Tyco Electronics wire
marker sleeves and cable
marker products on the
Compatible printer
Compatible materials
AM6310, AM6310D
CM-SCE, D-SCE*, HC, HL, HLTM-FB, HM, HS, RMK-6, RPS*, TMS-SCE*, MultiMark
Ordering information
Product order code
Description
1892BK04-RIBBON
Tyco Electronics standard dot matrix ribbon for AM6310 printer
AM6310 printer. See right for
compatible materials.
* Available only with AM6310D models
HIGH-PERF AM6310
General specifications
Ink
High performance
Tyco Electronics HIGH-PERF
AM6310 is a high perform-
ance, permanent black ink dot
matrix ribbon tested and
Standard color
Compatible printer
Compatible materials
Black
AM6310, AM6310D
HM, HX
approved for use on Tyco
Ordering information
Product order code
Description
Electronics wire marker sleeves
and cable marker products on
the AM6310 printer. See right
for compatible materials.
1892BK03-HIGH-PERF-RIBBON
Tyco Electronics high performance dot matrix ribbon for AM6310 printer
General specifications
Ink
QUICK-DRY AM6310
RI Quick-Dry
Tyco Electronics
Standard color
Black
QUICK-DRY AM6310 is a
quick drying indelible black ink
dot matrix ribbon tested and
approved for use on Tyco
Electronics dot matrix printable
pressure sensitive labels on the
AM6310 printer. See right for
compatible materials.
Compatible printer
Compatible materials
AM6310, AM6310D
C, DMVF, E, HLTM, HPC, HPTM, K, M, NMX, PV, TW
Ordering information
Product order code
Description
1892BK01
Tyco Electronics Quick-Dry dot matrix ribbon for AM6310 printer
Ribons
155
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Software
WinTotal Wire marker and label printing software
WinTotal software is a powerful 32-bit label/marker design
package that makes wire marker printing simple in an industrial
environment. Running in the familiar Windows environment, the
package is pre-loaded with all the Tyco Electronics wire
identification products to facilitate marker design. The software
features a highly graphical user interface to simplify operator
training and minimize errors. The Windows environment gives
access to a huge array of font options, including non-English fonts
such as Chinese, Japanese and Hebrew (when used with
appropriate operating systems or add-on software), and also
allows simple importing and manipulation of graphics and logos.
Bar code printing is available.
WinTotal software supports all common wire identification needs,
including:
ꢀ
Manual printing
ꢀ
Automatic set printing from spreadsheets, databases
or other CAD systems (including Tyco Electronics’s
HarnWare® harness design software package)
ꢀ
Incremental alpha and numeric fields
ꢀ
Double-sided marker printing
ꢀ
Automatic or manual routing or multiple printers
ꢀ
Paper output option
ꢀ
Wraparound marker production
ꢀ
User-defined products
ꢀ
Programmable buttons for repeated data insertion
The software can be password protected at different levels to
prevent unauthorized use, and can be run on networked
computers so that the design function can be separated from
printing. The display can be set to several different languages,
and a full on-screen Help function is incorporated.
Running behind the simple WinTotal user interface is a powerful
label-making package, so the software can be used to design and
print general labeling applications such as rating plates and
shipping labels.
Features and benefits
ꢀ
Powerful wire marker design and print software
ꢀ
Familiar Windows user environment
ꢀ
Pre-loaded with Tyco Electronics identification products
ꢀ
Powerful import and export functions: reads wire lists
from spreadsheets, databases and text files from CAD systems
a
ꢀ
Printer multi-tasking
ꢀ
Multiple on-screen languages
Specifications
TTDS-001
156
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Software
WinTotal Wire marker and label printing software
Features and benefits (continued)
Support
ꢀ
ꢀ
ꢀ
Double sided marker printing
Local or network printer support
Number of identical or serialized copies selectable
from database
ꢀ
ꢀ
ꢀ
Free technical support
OS Support: Windows 95, 98, ME, NT, 2000, XP
International language support
Serialization
Label design
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Increment or decrement by any interval
WYSIWYG label design and display
Align text left, right, justified or center
Built-in printer font support
ꢀ
Numeric, alphanumeric and custom base serialization
Database options
ꢀ
Windows True Type fonts
Microsoft ODBC support, including: Access, Excel and dBase
Lines, boxes and graphic images
Resize, rotate and stretch text, graphics and bar codes
Thumbnail preview of saved labels
ꢀ
ASCII text files
ꢀ
AutoCAD importing
Data management
Printing
ꢀ
Visual Basic scripting for custom data processing.
ꢀ
Set and batch printing capabilities
ꢀ
Sharable data fields
ꢀ
Multiple application port printing (MAPP)
ꢀ
Multiple products within one set or batch
Minimum recommended computer configuration
Computer
IBM-compatible PC
Processor
Intel Pentium® processor, 400 MHz minimum
RAM
64 MB minimum (128 MB for Windows NT, 2000 and XP)
Windows 95, 98, ME or NT (Service pack 6), 2000 and XP
25 MB minimum
Operating system
Disk space required
Other technical information
Barcode types
Codabar, code 39, code 93, code 128, EAN-13, EAN-8, UPC-E, Interleaved 2/5, ITF (DUN14), PDF 417, DataMatrix
Can be imported in BMP, PCX, MSP, WMF, JPG, JIF, GIF formats
Company logo or graphics
Text and graphics
Can be rotated, moved or resized
Ordering information
Ordering description
Product description
TMS-WINTOTAL-SWARE
Tyco Electronics Wire Marker Printing Software – Windows, 32 bit
Software
157
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Software
PrintEasy Label printing software
Tyco Electronics PrintEasy is a powerful yet easy to use Windows
based label design and printing software. With PrintEasy you can
quickly and easily combine bar codes, text and graphics into
professional quality labels. Carefully organized menus and pop-up
dialogs display all your options in plain, easy to understand words.
The true WYSIWYG display allows you to create and view your
labels with precision, giving you total control over your labels’
appearance before printing. PrintEasy is ideal for use with the Tyco
Electronics range of thermal transfer printable pressure sensitive
label products. PrintEasy is pre-loaded with all of Tyco Electronics’s
standard thermal transfer label templates, which allows you to sim-
ply select the Tyco Electronics part number you want to print and
you are ready to go!
Features and Benefits
Support
Bar codes
ꢀ
ꢀ
Free technical support
Numerous 1D and 2D symbologies
ꢀ
ꢀ
OS Support: Windows 95, 98, ME, NT, 2000, XP
Unlimited width and height
ꢀ
ꢀ
International language support
Sequentially numbered bar codes
ꢀ
Place characters above or below bar codes or
Label design
do not print
ꢀ
True WYSIWYG label design and display
ꢀ
Option to display Start/Stop characters
ꢀ
Built-in printer font support
ꢀ
Able to print MIL-STD-130 UID Syntax
ꢀ
Windows True Type fonts
Printing
ꢀ
Reverse (white on black) text printing
ꢀ
Printer-based bar codes and serial numbers
ꢀ
Align text left, right, justified or center
ꢀ
Speed optimization using repetitive data control
ꢀ
Unlimited Undo/Redo command
ꢀ
Local or network printer support
ꢀ
Lines, boxes and graphic images
ꢀ
Performance-enhancing printer controlled serialization
ꢀ
Import graphics in BMP, JPG, TIF, PCX, DCX, DIB,
EPS and others
ꢀ
Number of identical or serialized copies selectable
from database
ꢀ
Resize, rotate and stretch objects
ꢀ
Thumbnail preview of saved labels.
ꢀ
Metric and US measurement systems
oSftwrae
Specifications
TTDS-093
158
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
Printers
PrintEasy Label printing software
Features and Benefits (continued)
Serialization
Data management
ꢀ
ꢀ
Increment or decrement by any interval
Visual Basic scripting for custom data processing
ꢀ
ꢀ
Separate Rollover/Rollunder and Value Reset options
User-definable minimum and maximum field lengths
ꢀ
ꢀ
Preserve or expand field length when rolling over
Customizable data-entry filters and error checking
ꢀ
ꢀ
Numeric, alphanumeric and custom base serialization
Multi-data source selection per label object
ꢀ
Easy entry of special and unprintable control characters
Database options
ꢀ
Sharable data fields
ꢀ
Microsoft ODBC support, including: Access, Btrieve
dBase, Excel, Oracle, Paradox, Clipper, FoxPro,
Interbase and more.
ꢀ
Customizable message box handling
Integration
ꢀ
ASCII text files
ꢀ
Command line interface option
ꢀ
SAP (mySAP.com and R/3)
ꢀ
Pre-loadable into “background” to avoid start-up delays
ꢀ
Versatile multiple-table data access
ꢀ
Dynamically selectable label formats and data sources
ꢀ
Import variable graphics from databases
ꢀ
Error logging
ꢀ
Data query wizard
ꢀ
Individual record-picking at print time
Minimum recommended computer configuration
Computer
IBM-compatible PC
Processor
Intel Pentium® processor, 200 MHz minimum
RAM
32 MB minimum
Operating system
Disk space required
Windows 95, 98, ME or NT (Service pack 6), 2000 and XP
15MB to 80 MB minimum (depending on installation options)
Ordering information
Ordering description
PRINTEASY –BASIC
PRINTEASY –ECC4
PRINTEASY –PRO
Product description
Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet printers**
Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser, Inkjet, ECC4 and T200 printers**
Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet and Full Thermal Transfer support
Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet and Full Thermal Transfer support
with additional modules
PRINTEASY –SUITE
PRINTEASY –NET05
PRINTEASY –NET10
Tyco Electronics Label Printing Software – Windows, – Network version with 5 user license
Tyco Electronics Label Printing Software – Windows, – Network version with 10 user license
**Available in Europe, Middle East and Africa
Software
159
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Application Systems
HL2010E/HL1910E
The HL2010E and HL1910E Hot air heaters are designed to work
with a standard line voltage (230V) on a wide variety of Raychem
heat-shrinkable products. These tools are suitable for occasional
use and are not recommended for applications requiring high duty
cycles. Both tools supply forced hot air with an adjustable heat set-
ting to meet the requirements of many different installation situa-
tions. A three position switch controls the air flow (150/300/500
l/min).
The HL2010E tool is switched on and off at the three-stage switch
and the temperature can be continuously adjusted over a range of
50˚C -630˚C by the pushbuttons. The temperature can be
increased or reduced by 10˚C steps. An LCD display shows the
actual temperature.
The HL1910E tool is switched on and off at the two-stage switch
and the temperature can be continuously adjusted over a range of
50˚C - 600˚C at the thumbwheel (the numbers on it serve as a
guide only, 1 means 50˚C and max. temperature of 600˚C is
attained at 9).
Specifications
Voltage
Power
Air flow
Weight
Length
Noise
230V AC
2000W
A bench stand allowing use of both the HL2010E and the
HL1910E as a bench tool is available as an option. Furthermore, it
requires only two reflectors to cover most applications of heat-
shrinkable tubing and SolderSleeve terminations.
150 - 500 l/min
920g
280mm
<70 dB
*Available in Europe only
Ordering description Product description
PCN
HL2010E-230V tool
HL2010E-230V-Euro
HL2010E-230V-UK
C99451-000
A22932-000
A23120-000
HL2010E-Kit-230V-Euro
HL1910E-230V tool
HL1910E-230V-Euro
HL1910E-230V-UK
F30529-000
F11734-000
A93538-000
HL1910E-Kit-230V-Euro
Accessories
HL2010E/HL1910E tool HL1802E-074616-SolderSleeve
Terminators Reflector
832011-000
HL1802E-070519-Heat-shrinkable 022611-000
Tubings Reflector
HL1802E-070618 -9mm Adaptor 930321-000
HL1802E-070717-14mm
Reduction Nozzle
868259-000
HL1802E-070816-20mm
Reduction Nozzle
613361-000
HL1802E-ADAP-PR-Adaptor
for PR Series Reflector
HL1802E - Bench-Std
444817-000
717083-000
The HL2005E heatgun is supplied with a 3 year warranty statement by Steinel. This
warranty does not apply when used in a manufacturing environment as opposed to a
DIY environment. The 12 month warranty usually offered by Tyco on all tooling
applies (see conditions in warranty statement).
pAclaionSytems
160
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Cable Marker Tools and Accessories
AMP-TY Nylon cable ties
AMP-TY All-Nylon Cable Ties provide a strong, durable way to
bundle and harness cable quickly and economically. They can be
used on virtually any bundle configuration, in diameters ranging
from 1/16 [1.58] to 10 [254.00]. AMP-TY Cable Ties are resist-
ant to common solvents, alkalies, dilute acids, oils and greases.
All packages are heat sealed to retain moisture. Do not open
package until you are ready to apply the ties.
Features and benefits
ꢀ
Self-locking application by hand or hand tool provides versatility
ꢀ
Tapered tip speeds up threading and reduces applied cost
ꢀ
Interior serrations help hold individual wires in place through
friction
ꢀ
Tough, smooth nyon may be used in outdoor and indoor
applications. Black, UV-resistant ties are rcommended for
outdoor use
Fast and Easy to Apply
ꢀ
Specific parts meet the requirements of MIL-S-23190. See
MS3367 and MS3368 part number notations
ꢀ
All-nylon design eliminates metal components
ꢀ
Recognized under the Component
Program of Underwriters
R
Laboratories Inc., File No. E73541
1. Gather cables together.
2. Apply hand-tight.
3. Snug-up with tool.
4. Finished tie holds cables firmly.
AplcaionSytems
161
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Cable Marker Tools and Accessories
AMP-TY Nylon cable tie accessories
Accommodates ties with maxi-
mum tensile strength of 50 lbs.
[222.5 N]
Cable Tie Mount
(Screw Type)
Part No. 1-350087-0
Package of 100
Part No. 2-350087-0
Package of 1000
Note: Screw not included
Two-Way
0.38 [9.65] x 0.6 [15.24], #6
Screw Hole, without Adhesive
Back. Accommodates ties with
maximum tensile strength of 50
lbs. [222.5 N]
Cable Tie Mount
Permits entry from two sides.
Available in two sizes.
Part No. 608801-1
Package of 100
R
1.13 [28.70] x 1.13 [28.70] , #6
Screw Hole, with Adhesive* Back.
Accommodates ties with maxi-
mum
tensile strength of 50 lbs. [222.5
N]
Part No. 608800-1
Package of 100
0.75 [19.05] x 0.75 [19.05], two
#4 Screw Holes, with Adhesive*
Back. Accommodates ties with
maximum tensile strength of 30
lbs. [133.5 N]
Four-Way
Cable Tie Mount
Permits entry from four sides.
Available in two sizes.
Part No. 608802-1
Package of 100
1.13 [28.70] x 1.13 [28.70], two
#8 Screw Holes, with Adhesive*
Back. Accommodates ties with
maximum tensile strength of 50
lbs. [222.5 N]
Part No. 608803-1
Package of 100
Cable Tie
1 [25.4] x 1 [25.4], two 0.187
[4.75] Dia. Screw Holes, with
Adhesive Back. Accommodates
ties with maximum
tensile strength of 30 lbs. [133.5
N]
Swivel Mount
with Adhesive Back
and Screw Holes
(0.187 [4.75] Dia.)
Part No. 607847-1
Package of 100
*The rubber-based adhesive backing on these mounts has a tensile strength of 6 lbs. [26.7 N] per
square inch. This rating applies in temperatures from -50°F [-45°C] to 180°F [82°C]. For best
performance, mounts should be applied to a smooth, clean, dry, and oil-free surface.
AMP-TY Application Tool
Part No. 734587-1 (Color — blue)
IS 408-8816
Tool operates on cable ties up to 50
lbs. [222.5 N] tensile value. It has a
tensionadjustment and cuts off the
end of the tie.
Economy
Application Tool
pAclaionSytems
162
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
Application Systems
Engineering Notes
AplcaionSytems
163
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
相关型号:
©2020 ICPDF网 联系我们和版权申明