SSRD-240DE40 [TE]
Inverse parallel SCR outputs;型号: | SSRD-240DE40 |
厂家: | TE CONNECTIVITY |
描述: | Inverse parallel SCR outputs 输出元件 光电 |
文件: | 总2页 (文件大小:216K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Potter & Brumfield
Solid State Relay
SSRD Series
Dual AC Output “Hockey Puck”
Solid State Relay With
Paired SCR Outputs
File E29244
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of the
agencies/laboratories and review them to ensure the product meets the requirements
for a given application.
Features
Engineering Data
• Two independent AC output solid state relays in one
standard package.
• Inverse parallel SCR outputs.
• 25A rms & 40A rms versions available.
• Zero voltage and random voltage turn-on versions.
• 4000V rms optical isolation.
Form: 2 Form A (2 SPST-NO).
Duty: Continuous.
Isolation: 4000V rms input-to-output;
2500V rms input or output to ground.
Temperature Range:
Storage: –30°C to +100°C
Operating: –30°C to + 80°C
• Quick connect style terminals.
Case Material: Plastic, UL rated 94V-0.
Case and Mounting: Refer to outline dimension.
Termination: Refer to outline dimension.
Approximate Weight: 3.17 oz (90g)
Ordering Information
Typical Part Number
SSR
-240
D
25
R
1. Basic Series: SSRD = Dual output SSR - 2 SPST - NO
2. Line Voltage: 240 = 24 - 280VAC
3. Input Type & Voltage: D
= 4 - 15VDC
DE = 18 - 32VDC
4. Maximum Switching Rating/Output: 25 = .1 - 25A rms @ 25°C, mounted to heatsink
40 = .1 - 40A rms @ 25°C, mounted to heatsink
5. Options: Blank = Zero voltage turn-on (both outputs)
R = Random voltage turn-on (both outputs)
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
SSRD-240D25
SSRD-240D40
Input Specifications
Parameter
SSRD-240D25
SSRD-240D25R
SSRD-240D40
SSRD-240D40R
SSRD-240DE25
SSRD-240DE25R
SSRD-240DE40
SSRD-240DE40R
Units
Control Voltage Range VIN
Must Operate Voltage VIN(OP) (Min.)
Must Release Voltage VIN(REL) (Min.)
Input Current
Input Current (Typical)
Input Resistance
VDC
VDC
VDC
mA DC
mA DC
Ohms
4 - 15
4.0
1
3 - 40
15 @ 8 Vdc
375
18 - 32
18
1
3 - 40
20 @ 24 Vdc
800
1
11-2017, Rev. 1117
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Potter & Brumfield
SOLID STATE RELAY
SSRD Series (Continued)
Output Specifications (@ 25° C, unless otherwise specified)
Parameter
Load Voltage Range VL
Peak Voltage (Min.)
Load Current Range I L*
Single Cycle Surge Current (Max.)
Leakage Current (Off-State) (Max.)
On-State Voltage Drop (Max.)
Static dv/dt (Off-State) (Min.)
Thermal Resistance, Junction to Baseplate
(R0J-C) (Max.)
Conditions
f = 47 - 63 Hz.
t = 1 Min.
Units
V rms
25A Models
40A Models
24 - 280
600
V peak
A rms
A peak
mA rms
V peak
V/µs
Resistive
.1 - 25
300
.1 - 40
800
VL = 280V rms
IL = Max.
5.0
1.6
300
1.8
500
Both sections On
f = 60 / 50 Hz.
°C/W
ms
2.35
.86
8.3 / 10 for Zero Voltage Turn-On Models
0.1 for Random Voltae Turn-On Models
10 for Zero & 8.3 for Random Voltage turn ON
Turn-On Time (Max.)
Turn-Off Time (Max.)
I²T Rating
Load Power Factor Rating
f = 60 / 50 Hz.
t = 8.3 ms
IL = Max.
ms
A² Sec.
510
3745
0.5 - 1.0
* See Derating curve
Electrical Characteristics (Thermal Derating Curves)
Operating Diagram
Heatsink Recommendations
• We recommend that solid state relay modules be mounted to a heatsink
sufficient to maintain the module’s base temperature at less than 85°C
under worst case ambient temperature and load conditions.
• The heatsink mounting surface should be a smooth (30-40 micro-inch
finish), flat (30-40 micro-inch flatness across mating area), un-painted
surface which is clean and free of oxidation.
• An even coating of thermal compound (Dow Corning DC340 or
equivalent) should be applied to both the heatsink and module mounting
surfaces and spread to a uniform depth of .002” to eliminate all air
pockets.
• The module should be mounted to the heatsink using two #10 screws.
Random Turn-on units have a Random Turn-on
circuit instead of zero voltage circuit
Outline Dimensions
Input Terminal Connectors are available from
several different manufacturers.
TE P/N: 103976-3 or 640440-4
Methode P/N: 1300-004-422
Consult your local distributor for these or
equivalent connectors.
2
11-2017, Rev. 1117
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
相关型号:
SSRD-240DE40R
Inverse parallel SCR outputsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
©2020 ICPDF网 联系我们和版权申明