SSRDC-200D40 [TE]
DC Load Solid State Relay Hockey Puck;型号: | SSRDC-200D40 |
厂家: | TE CONNECTIVITY |
描述: | DC Load Solid State Relay Hockey Puck |
文件: | 总2页 (文件大小:244K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Potter & Brumfield
Solid State Relay
SSRDC Series
DC Load Solid State Relay
Hockey Puck
File E29244
Users should thoroughly review the technical data before selecting a
product part number. It is recommended that users also seek out the
pertinent approvals files of the agencies/laboratories and review them to
ensure the product meets the requirements for a given application.
Features
Engineering Data
• Standard “hockey puck” package.
• LED indicator.
Form: 1 Form A (SPST-NO).
Duty: Continuous.
Isolation: 1500V DC minimum.
Temperature Range:
Storage: –30°C to +100°C
Operating: –30°C to +80°C.
Case Material: Plastic, UL rated 94V-0.
Case and Mounting: Refer to outline dimension.
Termination: Refer to outline dimension.
• 12, 25 & 40A versions.
• 200V DC output types.
• DC input and output versions.
• 1500V DC optical isolation.
• Cover design with anti-rotation barriers
Approximate Weight: For 12
A
: 4.09 oz. (116g).
For 25A & 40A : 5.11 oz. (145g).
Ordering Information
Typical Part Number
SSRDC
-200
D
25
1. Basic Series: SSRDC = DC Load hockey puck solid state relay
2. Line Voltage: 200VDC
3. Input Type & Voltage: D = 3.5 - 32VDC
4. Maximum Switching Rating:
12 = 12A, mounted to heatsink
25 = 25A, mounted to heatsink
40 = 40A, mounted to heatsink
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
SSRDC-200D12
SSRDC-200D25
SSRDC-200D40
Input Specifications
SSRDC-200D12
SSRDC-200D25
SSRDC-200D40
Parameter
Units
Control Voltage Range VIN
Must Operate Voltage VIN(OP) (Min.)
Must release Voltage VIN(REL) (Min.)
Input Current (Max.)
VDC
VDC
VDC
mA
3.5 - 32
3.5
1
30
1
02-2018, Rev. 0218
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’
section.
Datasheets and product data is subject
Datasheets, product data, ‘Definitions’
section, application notes and all specifi-
cations are subject to change.
to the terms of the disclaimer and all
chapters of the ‘Definitions’section, avai-
lable at http://relays.te.com/definitions
Potter & Brumfield
Solid State Relay
SSRDC Series (Continued)
Output Specifications (@ 25° C, unless otherwise specified)
Parameter
Units
VDC
A
12A Models
25A Models
40A Models
Load Voltage Range V
L
200
12
200
25
200
40
Load Current Range I *
L
Single Cycle Surge Current
A
120
12
120
12
200
12
Leakage Current (Off-State) @Rated Current
On-State Voltage Drop @Rated Current
Turn-On Time (Max.)
mA
VDC
µs
2.83
600
2600
0.7
2.83
600
2600
0.7
2.83
600
2600
0.5
Turn-Off Time (Max.)
µs
Thermal Resistance, Junction to Case
°C/W
* See Derating curve
Electrical Characteristics (Thermal Derating Curves)
Heatsink Recommendations
• We recommend that solid state relay modules be mounted to a
heatsink sufficient to maintain the module’s base temperature at
less than 85°C under worst case ambient temperature and load
conditions.
• The heatsink mounting surface should be a smooth (30-40 micro-inch
finish), flat (30-40 micro-inch flatness across mating area), un-painted
surface which is clean and free of oxidation.
• An even coating of thermal compound (Dow Corning DC340 or
equivalent) should be applied to both the heatsink and module
• The module should be mounted to the heatsink using two #8 screws.
Operating Diagrams
Outline Dimensions
* Overall height dimensions includes with clear cover
Dimensions in mm
2
02-2018, Rev. 0218
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
Datasheets and product data is subject to
the terms of the disclaimer and all chap-
ters of the ‘Definitions’section, available
at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’
section, application notes and all specifi-
cations are subject to change.
according to IEC 61810-1 and to be
used only together with the ‘Definitions’
section.
相关型号:
©2020 ICPDF网 联系我们和版权申明