T92S7D12-12-00 [TE]
T92 Series Two-pole Power Relay;
| 型号： | T92S7D12-12-00 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | T92 Series Two-pole Power Relay |
| 文件： | 总5页 (文件大小：789K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
General Purpose
High Power PCB Relays
Potter & Brumfield
T92 Series Two-pole Power Relay
n
n
n
30/40/50A switching capability
Designed to control compressor loads to 3.5 tons, 110LRA / 25.3FLA
Meets requirements of UL 508 and UL 873 spacings - 8mm through
air, 9.5mm over surface
n
Meets requirements of VDE 8mm spacing, 4kV dielectric coil-to-
contact
n
n
n
n
n
Meets requirements of UL Class F construction
UL approved for 600VAC switching (1.5HP)
Screw terminal version (consult factory for availability, ratings)
Anti-explosive version available (Meets EN 60079-15)
WG version available (Meets EN 60335-1)
Typical applications
HVAC, residential / commercial appliances, industrial controls, charging
Approvals
Contact ratings 1) (T92 Type) (continued)
UL E22575; CSA LR48471; VDE 40019600; TUV R 50083843 0008;
TUV 15090924 002; TUV 15090883 001
Technical data of approved types on request.
Type
AgSnOInO
NO
NO
NO
NO
NO
Load
Cycles
40A, 240VAC, resistive 85°C
30A, 277VAC, resistive (DC coil only)
30A, 277VAC, resistive (AC coil only)
20A, 506VAC, resistive
50x103
250x103
100x103
100x103
Contact Data
Type
Contact arrangement
T92
2 form A (NO)
2 form C (CO)
T92H
2 form A (NO)
1.5HP, 120VAC, 2 pole making/breaking (Fig.1) 100x103
NO
NO
NO
3HP, 240VAC, 3 phase (DC coil only)
3HP, 480VAC, 3 phase (DC coil only)
2HP, 600VAC, 3 phase (DC coil only)
100x103
100x103
100x103
Rated voltage
Max. switching voltage
Rated current
Overload current*
Contact material
277VAC
600VAC
30A/40A NO; 3A NC
60A NO; 4.5A NC
Ag Alloy
50A NO
75A NO
Special Ag Alloy X (Cd Free), wash tight
NO
NO
NO
30A, 250VAC, resistive
30A, 400VAC, resistive
20A, 480VAC, resistive
100x103
100x103
100x103
Min. recommended contact load
500mA (NO), 12VAC or 5VDC
100mA (NC), 12VAC or 5VDC
360 cycles per hour
VDE
Frequency of operation, with load
Operate/release time max.,
including bounce
AgCdO, flange mount relays
NO
NC
CO
20A, 400VAC
3A, 400VAC
20A NO / 3A NC, 400VAC
100x103
30x103
30x103
25/25ms
< 100 mΩ at 6VDC 1A
Initial contact resistance
*Note: Minimum electrical endurance 50 cycles
AgCdO, PC mount relays
NO
NC
CO
30A, 400VAC
3A, 400VAC
30A NO / 3A NC, 400VAC
100x103
30x103
30x103
Contact ratings1) (T92H Type)
UL508
Anti-explosion, sealed type
NO
50A, 277VAC, resistive, 85°C
6x103
NO
30A 250VAC, 25°C
100x103
100x103
Note: Coil voltage 12-48VDC covered in UL approval
Anti-explosion, break device
NO
15A 480VAC
ARI 780-86 Endurance Test (section 6.6):
HVAC Definite Purpose Contactor Standard
Normally Open Contacts
Single Phase/Two Pole (Both poles together switching a single load)
110 LRA, 25.3 FLA, 200K operations (DC Coil)
Contact ratings 1) (T92 Type)
Type
UL508
AgCdO
NO
NO
NO
Load
Cycles
40A, 277VAC, resistive
30A, 277VAC, resistive (DC coil only)
30A, 277VAC, resistive (AC coil only)
10A, 600VAC, resistive
1HP, 120VAC
6x103
250×103
100×103
250x103
100x103
1x103
L1
L2
Figure 1
T1
T2
NO
NO
Single Phase Per Pole (Single load per pole)
110 LRA, 18 FLA, 200K operations (DC Coil).
60 LRA, 14 FLA, 200K operations (AC Coil).
NO
NO
NO
NO
NO
NO
3HP, 240VAC
1.5HP, 480 or 600VAC
110LRA/25.3FLA, 240VAC
7.3A, 240VAC, pilot duty
20A, 28VDC, resistive
TV10, 120VAC
100x103
100x103
100x103
100x103
25x103
L1
L2
T1
T2
Figure 2
NC
NC
NC
3A, 277VAC
2A, 480VAC, general purpose
1A, 600VAC
100x103
100x103
100x103
1) Contact ratings at 25°C (unless otherwise noted) with relay properly vented.
FLA, LRA ratings are compatible with 3.5 ton compressor applications.
Mechanical endurance
T92
T92H
10x106 ops.
1x106 ops
1
04-2021, Rev. 0421
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
General Purpose
High Power PCB Relays
Potter & Brumfield
T92 Series Two-pole Power Relay (Continued)
Coil Data
Coil voltage range
Coil Data (continued)
5 to 110VDC; 12 to 240VAC
120
100
80
60
40
20
0
Max. coil power
Max. coil temperature
Coil insulation system according UL
1.7W; 4.0VA
155°C
Class F
Coil versions, DC coil (D type)
Coil
code
Rated
voltage2)
VDC
5
Operate
voltage3)
VDC
3.75
4.5
6.75
9
13.5
16.5
18
27
36
82.5
90
Release
voltage
VDC
0.6
0.6
0.9
1.2
1.8
2.2
2.4
3.6
4.8
11
12
Coil
resistance
Ω 10ꢀ
14.9
22
48
86
197
294
350
767
1390
7255
8514
Rated coil
power
W
5
6
6
90 95 100 105 110 115 120 125 130 135 140 145 150
Applied Coil Voltage (% of Rated Nominal)
70 75 80 85
9
9
12
18
22
24
36
48
110
120
12
18
22
24
36
48
110
120
1.7W/
Min. 0.41W
hold
Note: This chart only apply for T92 standard type. For coil data of T92 Anti-
explosion sealed type and T92H type, please contact TE engineering.
Insulation Data
Initial dielectric strength
2) For T92H type, after the energization time of 100ms with rated voltage, the coil
requires a reduction of the coil voltage to 50ꢀ of rated voltage.
3) For Anti-explosion sealed type, the operate voltage is 80ꢀ of the rated coil
voltage.
between open contacts
between contact and coil
between adjacent contact
Initial surge withstand voltage
between contact and coil
Initial insulation resistance (@500VDC)
between insulated elements
Clearance/creepage
1500Vrms
4000Vrms
2000Vrms
8kV
Coil versions, AC coil (A type)
Coil
Rated Frequency Operate
Release
Coil
Rated coil
1x109Ω
code voltage
VAC
voltage
VAC, 60Hz VAC, 60Hz Ω 10ꢀ
voltage resistance power
Hz
60
60
60
50/60
60
VA
4
4
4
4
4
4
4
between contact and coil
8mm clearance/9.5mm creepage
12
24
110
120
208
240
277
12
24
110
9.6
19.2
88
1.2
2.4
11
9.1
36.6
793
Other Data
110/120
208
96
12
950
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
166.4
192
221.6
20.8
24
27.7
2841
3800
5485
220/240
250/277
50/60
50/60
Coil versions, AC coil (F type)
Coil Rated Frequency Operate
DC coil
AC coil
-55ºC to 85ºC
-55ºC to 65ºC
Release
Coil
Rated coil
code voltage
VAC
voltage
VAC, 60Hz VAC, 60Hz Ω 10ꢀ
voltage resistance power
Category of environmental protection
IEC 61810
Hz
50
50
50
50
VA
3.5
3.5
3.5
3.5
RTI - dust protected,
RTII - flux proof, RTIII - wash tight
1.65mm max amplitude, 10-55 Hz
10G for 11msec
12
24
48
12
24
48
9.6
19.2
38.4
192
1.2
2.4
4.8
24
11.2
44.4
179.2
4355
Vibration resistance (functional)
Shock resistance (functional)
Shock resistance (destructive)
Terminal type
240
240
100G
All figures are given for coil without preenergization, at ambient temperature +23°C.
For A type, 110V/120V, 50/60Hz. Signify 50Hz Operation at Nominal 110V, 60 Hz
Operation at Nominal 120V.
PCB / Quick Connect / Screw
2
04-2021, Rev. 0421
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
General Purpose
High Power PCB Relays
Potter & Brumfield
T92 Series Two-pole Power Relay (Continued)
Dimensions
T92/T92H – Mounting and termination code 1
T92 – Mounting and termination code 2, 3 and 4
1.ꢀ6 MAX.
(ꢀ4.54)
2.700 MAX.
(68.58)
2.06 MAX.
(52.32)
1.36 MAX.
(34.54)
1.04 MAX.
(26.42)
1.495 MAX.
(ꢀ7.97)
1.21 MAX.
(30.73)
.156 0.012
(3.96 0.3)
.250 TYP.
(6.35)
1.618 .020
.047 TYP.
(1.19)
(41.10 .51)
2.05 MAX.
(52.07)
.585 .005
(14.86 .13)
.032 TYP.
(0.81)
.309 .005
(7.85 .13)
2.ꢀ45 .005
(59.56 .1ꢀ)
Pre-soldering
1.618 TYP.
(41.10 .51)
in below side
.585 .005
(14.86 .1ꢀ)
.ꢀ09 .005
(7.85 .1ꢀ)
1.000 .010
(25.40 .25)
.630 .005
(16.00 .13)
.090 RAD.
(2.29)
FOR #8 SCREW
.6ꢀ0 TYP.
(16.00)
Note: Dimensions of the pins after tin soldering
a) +0.3mm for the width and the thickness
b) +1.0mm for the length
T92 – Mounting and termination code 5
PCB layout
Bottom view on pins
2.700 MAX.
(68.58)
T92/T92H - Mounting and termination code 1
1.36 MAX.
(34.54)
.090 (2.29)
RAD. FOR
#8 SCREW
1.618
(41.10)
.585
(14.86)
.309
.185
(4.70)
(7.85)
2.345 .005
(59.56 .13)
.365
(9.27)
1.431 MAX.
(36.34)
2.135 MAX.
(54.23)
.630
(16.00)
1.000
(25.40)
2.010 MAX.
(51.05)
.203 TYP.
(5.16)
.052 TYP.
(1.32)
.072 TYP.
(1.83)
.913 MAX.
(23.19)
.162
(4.12)
An alternate PC board layout utilizes .076 .003 (1.93 .076) diameter holes on the same
center-to-center spacing shown above. Use of the rectangular holes is recommended for
improved solderability.
Terminal assignment
Bottom view on pins
Only necessary terminals are present on single throw models. Consequently, some holes
will be unnecessary for single throw models.
2 form A
2 form C
0
1
0
1
2
6
4
8
2
6
4
3
7
8
3
04-2021, Rev. 0421
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
T92 Series Two-pole Power Relay (Continued)
Product code structure (T92H type)
Type
Typical product code T92H
P
7
D
1
X
-12
T92H Power relay T92 High Performance (50A)
Enclosure
P
S
Dust protected plastic case
Wash-tight, tape sealed, plastic case (Mounting and termination code 1)
Contact arrangement
7
Coil Input
D
2 form A (2 NO)
DC voltage
Mounting and termination
1
Printed circuit board mount; printed circuit board terminals.
Contact material
X
Special Ag Alloy X (Cd Free)
Coil voltage
Coil code: please refer to coil versions table
Product code
T92HP7D1X-12
T92HP7D1X-24
T92HP7D1X-48
Enclosure
Contacts
Coil
Mounting
Contact Material
Coil
Part number
6-1423008-6
6-1423008-7
6-1423008-9
Plastic dust cover 2 form A, 2 NO
DC
PCB terminals
Special Ag Alloy X (Cd Free)
12VDC
24VDC
48VDC
Note. This list represents the most common types and does not show all variants covered by this datasheet, other types on request.
Product code structure (T92 type)
Product code structure
Type
Typical product code T92
S
11
D
2
2
-24 -99
T92
Printed circuit board / panel mount power relay T92
Enclosure
P
S
Dust protected plastic case
Wash-tight, tape sealed, plastic case (Mounting and termination code 1)
Wash-tight, glue sealed, plastic case (Mounting and termination code 1, 2 for anti-explosion version)
Top sealed, not wash-tight, not tape sealed on bottom (Mounting and termination codes 2, 3 & 4)
Contact arrangement
7
Coil Input
A
2 form A (2 NO)
11 2 form C (2 CO)
AC voltage, 60Hz or 50/60 Hz (consult coil versions table)
D
DC voltage
F AC voltage, 50Hz
Mounting and termination
1
2
3
4
5
Printed circuit board mount; printed circuit board terminals.
Panel mount via flanged cover; .250” (6.35mm) x .032” (.81mm) QC terminal
Panel mount via flanged cover; .187” (4.75mm) x .032” (.81mm) QC terminals for coil and .250” (6.35mm) for contacts
Panel mount via flanged cover, .187” (4.75mm) x .020” (.51mm) QC terminals for coil and .250” (6.35mm) for contacts.
Panel mount via flanged cover, M4 screws w/ captive pressure plates. Requires Enclosure P and Contact arrangement 7.
Contact material
2
AgCdO
4
AgSnOInO
X
Special Ag Alloy X (Cd Free)
Coil voltage
Coil code: please refer to coil versions table
Customer code
-99
Anti-explosion
-00
WG version
4
04-2021, Rev. 0421
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
General Purpose
High Power PCB Relays
PPootttteerr && BBrruummfifieelldd
T92 Series Two-pole Power Relay (Continued)
Product Code
T92P7A22-24
T92P7A22-120
T92P7A22-240
T92P7A22-277
T92P7A24-240
T92P7A52-120
T92P7A52-240
T92P7D12-12
T92P7D14-12
T92P7D12-24
T92P7D22-12
T92P7D22-24
T92P7D22-48
T92P7D24-12
T92P7D24-24
T92P7D42-24
T92P7D52-12
T92P7D52-24
T92P11A12-120
T92P11A22-12
T92P11A22-24
T92P11A22-120
T92P11A22-240
T92P11A22-277
T92P11A24-240
T92P11A42-120
T92P11D12-12
T92P11D22-12
T92P11D22-24
T92P11D24-12
T92P11D24-24
T92S7A12-24
T92S7A12-120
T92S7A12-240
T92S7A22-24
T92S7A22-120
T92S7A22-240
T92S7D12-12
T92S7D12-24
T92S7D12-48
T92S7D12-110
T92S7D14-12
T92S7D14-24
T92S7D22-12
T92S7D22-18
T92S7D22-24
T92S7D22-110
T92S11A12-24
T92S11A12-120
T92S11A12-240
T92S11A22-12
T92S11A22-24
T92S11A22-120
T92S11A22-240
T92S11D12-12
T92S11D12-24
T92S11D12-48
T92S11D12-110
T92S11D22-12
T92S11D22-24
T92P7D12-12-99
T92S7D1X-12-99
T92S7D2X-12-99
T92S7A22-240-00
T92S7D12-12-00
Enclosure
Contacts
Coil
Mounting
Contact Material
Coil
Part Number
6-1393211-0
5-1393211-7
6-1393211-2
6-1393211-3
3-1423008-3
1423008-8
1-1423008-2
6-1393211-5
2-1423008-1
6-1393211-6
6-1393211-9
7-1393211-1
7-1393211-2
2-1423008-2
1423008-9
Plastic dust cover 2 form A, 2 NO
AC
Panel mount + quick connect
AgCdO
24 VAC
120 VAC
240 VAC
277 VAC
240 VAC
120 VAC
240 VAC
12 VDC
12 VDC
24 VDC
12VDC
AgSnOInO
AgCdO
Panel mount + screw terminals
PCB terminals
DC
AgSnOInO
AgCdO
Panel mount + quick connect
24 VDC
48 VDC
12VDC
AgSnOInO
AgCdO
24 VDC
7-1393211-5
1-1423008-0
1423967-1
Panel mount + screw terminals
12 VDC
24 VDC
120 VAC
12 VAC
2 form C, 2 CO
AC
PCB terminals
Panel mount + quick connect
3-1393211-8
3-1393211-9
4-1393211-3
4-1393211-0
4-1393211-4
4-1393211-6
3-1423008-7
4-1393211-8
5-1393211-0
5-1393211-3
5-1393211-4
3-1423008-5
3-1423008-6
9-1393211-8
9-1393211-7
9-1393211-9
1393212-4
24 VAC
120 VAC
240 VAC
277 VAC
240 VAC
120VAC
12 VDC
AgSnOInO
AgCdO
DC
AC
PCB terminals
Panel mount + quick connect
24 VDC
12 VDC
24 VDC
24 VAC
120 VAC
240 VAC
24 VAC
120 VAC
240 VAC
12 VDC
24 VDC
48 VDC
110 VDC
12 VDC
24 VDC
12 VDC
18 VDC
24 VDC
110 VDC
24 VAC
120 VAC
240 VAC
12 VAC
24 VAC
120 VAC
240 VAC
12 VDC
24 VDC
48 VDC
110 VDC
12 VDC
24 VDC
12VDC
AgSnOInO
AgCdO
Wash tight
Top sealed
Wash tight
2 form A, 2 NO
PCB terminals
Panel mount + quick connect
PCB terminals
1393212-2
1393212-5
1393212-8
1-1393212-0
1-1393212-1
1393212-7
DC
AgSnOInO
AgCdO
1-1423008-6
1-1423008-8
1-1393212-4
1-1393212-5
1-1393212-7
1-1393212-3
8-1393211-1
8-1393211-0
8-1393211-2
8-1393211-3
8-1393211-6
8-1393211-4
8-1393211-7
8-1393211-9
9-1393211-0
9-1393211-1
8-1393211-8
9-1393211-3
9-1393211-4
2-2071223-3
6-1423008-1
6-1423008-2
2-2071223-4
1-2071223-7
Top sealed
Panel mount + quick connect
Wash tight
Top sealed
2 form C, 2 CO
AC
PCB terminals
Panel mount + quick connect
Wash tight
Top sealed
DC
DC
PCB terminals
Panel mount + quick connect
PCB terminals
Plastic dust cover 2 form A, 2 NO
Wash tight
AgCdO
Special Ag Alloy
X (Cd Free)
AgCdO
12VDC
12VDC
240VAC
12VDC
Panel mount + quick connect
PCB terminals
Top Sealed(WG)
Wash tight (WG)
AC
DC
Note. This list represents the most common types and does not show all variants covered by this datasheet, other types on request.
5
04-2021, Rev. 0421
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
相关型号：
T92S7D12-24
2 pole 30 A, 2 CO or 2 NO contactsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D12-48
T92 Series Two-pole Power RelayWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D14-12
T92 Series Two-pole Power RelayWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D14-24
T92 Series Two-pole Power RelayWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D1X-12-99
T92 Series Two-pole Power RelayWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D22-110
T92 Series Two-pole Power RelayWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D22-12
T92 Series Two-pole Power RelayWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D22-18
T92 Series Two-pole Power RelayWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D22-24
2 pole 30 A, 2 CO or 2 NO contactsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T92S7D2X-12-99
T92 Series Two-pole Power RelayWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE
T93
3/8 Square Multi-Turn Cermet TrimmersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T93-N37-10.000MHZ
Oscillator,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EUROQUARTZ
©2020 ICPDF网 联系我们和版权申明