V23105A5001A201 [TE]

The Best Relaytion; 最佳Relaytion
V23105A5001A201
型号: V23105A5001A201
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

The Best Relaytion
最佳Relaytion

文件: 总11页 (文件大小:472K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
The Best Relaytion  
D2n Relay  
108-98007  
Rev. C  
EC-JM00-0009-03  
ECOC: JM10  
1. Apr. 04  
D2n Relay  
V23105  
2 pole telecom relay, non-polarized,  
Through Hole Type (THT)  
Relay types:  
non-latching with 1 coil  
Features  
– Standard DIL relay  
– Dimensions 20.3 x 10.1 x 10.43 mm, 0.800 x 0.400 x 0.450 inch  
Switching and continous current 3 A  
– 2 changeover contacts (2 form C / DPDT)  
– Single contacts  
– Immersion cleanable  
Four different coil sensitivities  
(150, 200, 400, > 500 mW)  
– Surge voltage resistance meets FCC Part 68 requirement:  
1.5 kV (10 / 160 µsec) between coil and contacts  
Typical applications  
– Communications equipment  
– Office equipment  
Measurement and control equipment  
Entertainment electronics  
Medical Equipment  
Consumer electronics  
European Directive conformance:  
UL 508  
File No. E 111441  
D2n relay product conformance according to:  
-
-
Directive 2000/53/EC: ELV (End of Life of Vehicles)  
Directive 2002/95/EC: ROHS (Restrictions of the  
use of certain hazardous substances in electrical and  
electronic equipment)  
Compliance is evidenced by written declaration from all raw  
material suppliers.  
Tyco Electronics AXICOM only has responsibility for the proper  
processing of these materials.  
Confirmation is valid for date codes ≥ 0418  
Page 2 (11)  
108-98007 Rev. C  
D2n Relay  
V23105  
THT Version  
Dimensions  
THT  
V23105-A5xxx-A201  
mm  
inch  
L
20.2 ± 0.1  
10.0 ± 0.1  
11.43 ± 0.2 0.450 - 0.008  
0.795 ± 0.004  
0.394 ± 0.004  
W
H
T
3.5 ± 0.3  
0.138 ± 0.012  
0.028 - 0.008  
0.012 ± 0.004  
Tw 0.72 - 0.2  
0.3 ± 0.1  
S
Mounting hole layout  
View onto the component side of the PCB  
(top view)  
Basic grid 2.54 mm  
Terminal assignment  
Relay - top view  
Page 3 (11)  
108-98007 Rev. C  
D2n Relay  
V23105  
Coil Data (values at 23°C)  
Ordering Information  
Nominal  
voltage  
Unom  
Operate/set voltage range  
Release/  
reset voltage  
Minimum  
Coil  
power  
Coil  
Resistance  
Relay  
code  
Tyco part  
number  
Minimum  
voltage Umin voltage Umax  
Vdc Vdc  
Maximum  
Vdc  
Vdc  
mW  
/ ± 10 %  
150 mW nominal power consumption  
5
6
9
12  
24  
4.0  
4.8  
7.2  
9.6  
19.2  
11.7  
14.0  
21.0  
28.0  
56.0  
0.25  
0.30  
0.45  
0.60  
1.20  
150  
150  
150  
150  
165  
167  
240  
540  
960  
3480  
V23105A5001A201 8-1393792-5  
V23105A5002A201 8-1393792-7  
V23105A5006A201 9-1393792-1  
V23105A5003A201 8-1393792-8  
V23105A5005A201 9-1393792-0  
200 mW nominal power consumption  
3
5
6
2.1  
3.5  
4.2  
6.3  
8.4  
6.1  
10.1  
12.2  
18.2  
24.3  
48.6  
97.2  
0.15  
0.25  
0.30  
0.45  
0.60  
1.20  
2.40  
200  
200  
200  
200  
200  
200  
200  
45  
125  
180  
405  
720  
V23105A5308A201 0-1393793-5  
V23105A5301A201 9-1393792-3  
V23105A5302A201 9-1393792-5  
V23105A5306A201 0-1393793-2  
V23105A5303A201 9-1393792-7  
V23105A5305A201 9-1393792-9  
V23105A5307A201 0-1393793-3  
9
12  
24  
48  
16.8  
33.6  
2880  
11520  
400 mW nominal power consumption  
5
6
9
12  
24  
48  
3.5  
4.2  
6.3  
8.4  
16.8  
33.6  
7.2  
8.6  
12.9  
17.2  
34.3  
68.6  
0.25  
0.30  
0.45  
0.60  
1.20  
2.40  
400  
400  
400  
400  
400  
400  
62  
90  
203  
360  
1440  
5760  
V23105A5401A201 0-1393793-6  
V23105A5402A201 0-1393793-7  
V23105A5406A201 1-1393793-0  
V23105A5403A201 0-1393793-8  
V23105A5405A201 0-1393793-9  
V23105A5407A201 1-1393793-1  
> 500 mW nominal power consumption  
5
6
9
12  
24  
48  
3.5  
4.2  
6.3  
8.4  
16.8  
33.6  
6.1  
7.3  
10.9  
14.5  
29.1  
58.1  
0.25  
0.30  
0.45  
0.60  
1.20  
2.40  
695  
515  
580  
515  
550  
575  
36  
70  
140  
280  
1050  
4000  
V23105A5501A201 1-1393793-6  
V23105A5502A201 1-1393793-8  
V23105A5506A201 2-1393793-3  
V23105A5503A201 1-1393793-9  
V23105A5505A201 2-1393793-1  
V23105A5507A201 2-1393793-4  
Coil versions, BT 47 type / specification T4563 C (current tested)  
Nominal  
voltage  
Operating  
current  
Nominal power  
consumption  
Resistance  
British  
Relay code  
Tyco  
Part Number  
Telecom Code  
Vdc  
mA  
mW  
W / ± 10 %  
5
10  
12  
24  
48  
80  
32.5  
27  
14  
7
695  
500  
515  
550  
575  
36  
200  
280  
1050  
4000  
47 W / 5  
47 W / 9  
47 W / 6  
47 W / 7  
47 W / 8  
V23105A5475A201 1-1393793-2  
V23105A5479A201 3-1393794-0  
V23105A5476A201 1-1393793-3  
V23105A5477A201 1-1393793-4  
V23105A5478A201 1-1393793-5  
Page 4 (11)  
108-98007 Rev. C  
D2n Relay  
V23105  
Coil operating range  
3.0  
2.8  
2.6  
2.4  
2.2  
2.0  
1.8  
1.6  
1.4  
1.2  
3
2.8  
2.6  
2.4  
2.2  
2
150 mW  
200 mW  
Umax. at 0 A  
Umax. at 2 x 1 A  
Umax. at 2 x 2 A  
Umax. at 0 A  
Umax. at 2 x 1 A  
Umax. at 2 x 2 A  
1.8  
1.6  
1.4  
1.2  
1
Unom. nominal coil voltage  
1.0  
Unom. nominal coil voltage  
0.8  
0.6  
0.4  
0.2  
0.0  
0.8  
0.6  
0.4  
0.2  
0
Uop. min.  
Urel. min.  
Uop. min.  
Urel. min.  
-30 -20 -10  
0
10 20 30 40 50 60 70 80 90 100 110 120  
-30 -20 -10  
0
10 20 30 40 50 60 70 80 90 100 110 120  
Ambient Temperature [°C]  
Ambient Temperature [°C]  
3.0  
2.8  
2.6  
2.4  
2.2  
2.0  
1.8  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0.0  
3.0  
400 mW  
550 mW  
2.8  
2.6  
2.4  
2.2  
2.0  
1.8  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0.0  
Umax. at 0 A  
Umax. at 2 x 1 A  
Umax. at 2 x 2 A  
Umax. at 0 A  
Umax. at 2 x 1 A  
Umax. at 2 x 2 A  
Unom. nominal coil voltage  
Unom. nominal coil voltage  
Uop. min.  
Urel. min.  
Uop. min.  
Urel. min.  
-30 -20 -10  
0
10 20 30 40 50 60 70 80 90 100 110 120  
-30 -20 -10  
0
10 20 30 40 50 60 70 80 90 100 110 120  
Ambient Temperature [°C]  
Ambient Temperature [°C]  
Unom  
Umax.  
=
=
Nominal coil voltage  
Upper limit of the operative range of  
the coil voltage (limiting voltage) when coils are  
continously energized  
Uop. min.  
=
Lower limit of the operative range of  
the coil voltage (reliable operate voltage)  
Urel. min.  
=
Lower limit of the operative range of  
the coil voltage (reliable release voltage)  
Page 5 (11)  
108-98007 Rev. C  
D2n Relay  
V23105  
Ordering Code  
V 2 3 1 0 5 A 5  
A 2 0 1  
D2n Relay Identification  
Version  
0 = 150 mW nominal power consumption  
3 = 200 mW  
4 = 400 mW  
5 = 550 mW  
Coil number  
08 = 3 V nominal voltage (only with 150/200 mW nominal coil power consumption*)  
01 = 5 V nominal voltage  
02 = 6 V  
06 = 9 V  
04 = 10 V (only with 500 mW nominal coil power consumption)  
03 = 12 V  
05 = 24 V  
07 = 48 V (not with 150 mW nominal coil power consumption)  
BT 47 versions  
475 = 5 V nominal voltage  
479 = 10 V  
476 = 12 V  
477 = 24 V  
478 = 48 V  
Contact assembly  
A201 = 2 changeover contacts; silver nickel, gold-plated, against silver nickel, gold-plated  
*) Coils with 400/500 mW nominal power consumption on request  
Ordering example: V23105-A5301-A201  
D2 Relay, coil 5 V nominal voltage, 200 mW nominal power consumption,  
Contact material silver nickel, gold-plated, against silver nickel, gold plated  
Page 6 (11)  
108-98007 Rev. C  
D2n Relay  
V23105  
Contact Data  
Number of contacts and type  
Contact assembly  
2 changeover contacts  
single contacts  
Silver-nickel, gold-covered  
3 A  
Contact material  
Limiting continuous current at max. ambient temperature  
Maximum switching current  
Maximum swichting voltage  
3 A  
220 Vdc  
250 Vac  
Maximum switching capacity  
Thermoelectric potential  
60 W, 125 VA  
> 10 mV  
Minimum switching voltage  
100 mV  
Initial contact resistance / measuring condition: 10 mA / 20 mV  
Electrical endurance at 230 Vac / 0.5 A  
< 100 mW  
typ. 3.0 x 105operations  
at 6 Vdc / 0.1 A  
at 30 Vdc / 1 A  
typ. 2.0 x 106 operations  
typ. 5.0 x 105 operations  
at 30 Vdc / 2 A  
typ. 1.0 x 105 operations  
Mechanical endurance  
UL contact ratings  
typ. 15.0 x 106 operations  
30 Vdc / 1.0 A  
100 Vdc / 0.3 A  
125 Vac / 0.5 A for 150 mW and 200 mW coil  
125 Vac / 1.0 A for 400 mW and 500 mW coil  
Max. DC load breaking capacity  
DC current [A]  
Page 7 (11)  
108-98007 Rev. C  
D2n Relay  
V23105  
Insulation  
Insulation resistance at 500 Vdc  
Dielectric test voltage (1 min)  
between coil and contacts  
between adjacent contact sets  
between open contacts  
> 109 W  
1000 Vrms  
750 Vrms  
750 Vrms  
Surge voltage resistance  
according to FCC 68 (10 / 160 ms)  
between coil and contacts  
between adjacent contact sets  
between open contacts  
1500 V  
1500 V  
1500 V  
High Frequency Data  
Capacitance  
between coil and contacts  
between adjacent contact sets  
between open contacts  
max. 2 pF  
max. 1.5 pF  
max. 1 pF  
RF Characteristics  
Isolation at 100 / 900 MHz  
Insertion loss at 100 / 900 MHz  
V.S.W.R. at 100 / 900 MHz  
-39.0 dB / -20.7 dB  
-0.02 dB / -0.27 dB  
1.04 / 1.40  
General data  
Operate time at Unom typ. / max.  
Release time without diode in parallel, typ. / max.  
Release time with diode in parallel, typ. / max.  
Bounce time at closing contact, typ. / max.  
Maximum switching rate without load  
Ambient temperature  
5 ms / 7 ms  
4 ms / 6 ms  
7 ms / 10 ms  
3 ms / 5 ms  
20 operations/s  
150 and 200 mW coil  
-25° C ... +85° C  
400 mW coil  
-25° C ... +75° C  
500 mW coil  
-25° C ... +60° C  
Thermal resistance  
< 100 K/W  
Maximum permissible coil temperature  
Vibration resistance (function)  
105° C  
10 g  
10 to 55 Hz  
Shock resistance, half sinus, 11 ms  
10 g (function)  
40 g (damage)  
Degree of protection / Environmental protection  
Needle flame test  
immersion cleanable, IP 67 / RT III  
application time 20 s, burning time < 15 s  
any  
Mounting position  
Processing information  
Weight (mass)  
Ultrasonic cleaning is not recommended  
max. 2.5 g  
Terminal coating  
SnCu 0,7  
Resistance to soldering heat  
260° C / 10 s  
All data refers to 23° C unless otherwise specified.  
Page 8 (11)  
108-98007 Rev. C  
D2n Relay  
V23105  
Dimensions in mm  
Packing  
Tube for THT version - 25 relays per tube, 1000 relays per box  
Page 9 (11)  
108-98007 Rev. C  
D2n Relay  
V23105  
IM Relays  
D2n Relays  
4th generation slim line – low profile polarized 2 c/o telecom relay with  
bifurcated contacts, available as non latching or latching relay with  
1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption  
of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay  
is available as through hole and surface mount type (J-Legs and Gull  
Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric  
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV  
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is  
CECC/IECQ approved and certified in accordance with IEC/EN 60950  
and UL1950. Dimensions approx. 10 x 6 mm board space and  
5.65 mm height.  
2nd generation non polarized 2 c/o relay for telecom and various  
other applications. Nominal voltage range from 3 ... 48 V, coil power  
consumption from 150 .... 500 mW. The D2n relay is capable to  
switch currents up to 3 A. Dielectric strength fulfills the requirements  
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.  
20 x10 mm board space and 11,5 mm height.  
P1 Relays  
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for  
a wide range of applications, available as non latching or latching relay  
with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power  
consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay  
is available as through hole or surface mount type and capable to  
switch currents up to 1 A. Dielectric strength fulfills the requirements  
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.  
13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for  
SMT version.  
P2 Relays  
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,  
available as non latching or latching relay with 1 or 2 coils. Nominal  
voltage range from 3 ... 24 V, coil power consumption 140 mW,  
latching relays with 1 coil 70 mW. The P2 Relay is available as through  
hole or surface mount type and capable to switch currents up to 5  
A. Dielectric strength fulfills the Bellcore requirements according GR  
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).  
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.  
W11 Relays  
Low cost, non polarized 1 c/o relay for various applications. Nominal  
voltage range from 3 ... 24 V, coil power consumption 450 mW,  
sensitive versions 200 mW. The W11 relay is capable to switch  
currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.  
15,6 x 10,6 mm board space and 11,5 mm height.  
FX Relays  
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,  
available as non latching or latching relay with 1 coil. Nominal voltage  
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the  
high sensitive version, 140... 300 mW for the standard version, latching Reed Relays  
relays with 1 coil 100 mW. The FX2 relay is available as through hole  
type and capable to switch loads up to 60 W/62,5 VA. Dielectric  
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV  
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/  
IECQ approved and certified in accordance with IEC/EN 60950 and  
UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm  
height.  
High sensitive, non polarized relay for telecom and various other  
applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal  
voltage range from 5 ... 24 V, coil power consumption 50...280 mW  
for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays  
are available in DIP or SIL housing and capable to switch currents up to  
0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric  
strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and  
5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm  
height for SIL version.  
FT2 / FU2 Relays  
3rd generation non polarized, non latching 2 c/o telecom relay with  
bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power  
consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as  
through hole and surface mount type. Dielectric strength fulfills the  
Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC  
part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved  
and certified in accordance with IEC/EN 60950 and UL1950.  
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.  
Cradle Relays  
Extremely reliable and mature relay family of 1st generation for various  
signal switching applications. Available as non polarized, polarized  
/ latching and relay with AC coil. The benefit is the possibility of  
combining various contact sets from 1 up to 6 poles, single and  
bifurcated contacts, different contact materials with a coil voltage  
range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust  
protected and hermetically sealed versions, with plug in or solder  
terminals and are capable to switch currents up to 5 A. Forcibly  
guided (linked) contact sets optional. Dielectric strength 500 Vrms.  
Dimensions from approx. 19 x 24 to 19x35 mm board space and  
30 mm height.  
FP1 Relays  
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,  
available as non latching or latching relay with 1 or 2 coils. Nominal  
voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW  
for the high sensitive version, 140... 300 mW for the standard version,  
latching relays with 1 coil 100 mW.. The FP1 Relay is available as  
through hole type and capable to switch loads up to  
Other Relays  
We offer a variety of different relay families for maintenance and  
replacement purposes. These relays are up to 60 years old now, such  
as Card Relay SN (V23030 / V23031 series), Small General Purpose  
Relay (V23006 series), Small Polarized Relay (V23063 ... V23067  
and V23163 ... V23167 series). Accessories like sockets, hold down  
springs, etc. optional.  
30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /  
160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.  
14 x 9 mm board space and 5 mm height.  
MT2 / MT4  
2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and  
signal relay with bifurcated contacts. Nominal voltage range from 4.5 ...  
48 V, coil power consumption 150/200/300/400 and  
550 mW, and 300 mW (MT4). Dielectric strength fulfills the  
requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both  
and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)  
the MT4 only.  
HF3 Relay  
High performance low cost RF relay with excellent RF characteristics.  
Available with an impedance of 50 and 75 Ohm. Suitable for frequen-  
cies up to 3 GHz. Actually smallest RF relay available combining small  
size, excellent RF performance and SMD solderability. Available as non  
latching or latching relay with 1 or 2 coils and a nominal coil voltage  
range from 3 ... 24 V, coil power consumption 140 mW, latching relays  
with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.  
Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,  
MT4 approx. 20 x15 mm board space and 11 mm height.  
Page 10 (11)  
108-98007 Rev. C  
Tyco Electronics AXICOM Ltd.  
Seestrasse 295 - P.O. Box 220  
CH-8804 Au-Wädenswil / Switzerland  
Phone +41 1 782 9111  
Fax +41 1 782 9080  
E-mail: axicom@tycoelectronics.com  
Tyco Electronics AMP GmbH  
Paulsternstrasse 26  
D-13629 Berlin / Germany  
Phone +49 30 386 38260  
Fax +49 30 386 38569  
E-mail: axicom@tycoelectronics.com  
Tyco Electronics EC Trutnov s.r.o.  
Komenského 821  
CZ-541 01 Trutnov / Czech Republic  
E-mail: axicom@tycoelectronics.com  
Tyco Electronics Corporation  
POB 3608,  
Harrisburg, PA 17105, USA  
Phone +1 800-522-6752  
Page 11 (11)  
108-98007 Rev. C  

相关型号:

V23105A5002A201

The Best Relaytion

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE

V23105A5002A201

D2n Relay V23105

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MACOM

V23105A5003A201

The Best Relaytion

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE

V23105A5003A201

D2n Relay V23105

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MACOM

V23105A5005A201

The Best Relaytion

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE

V23105A5005A201

D2n Relay V23105

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MACOM

V23105A5006A201

The Best Relaytion

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE

V23105A5006A201

D2n Relay V23105

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MACOM

V23105A5301A201

The Best Relaytion

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE

V23105A5301A201

D2n Relay V23105

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MACOM

V23105A5302A201

The Best Relaytion

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TE

V23105A5302A201

D2n Relay V23105

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MACOM