VTP110F_技术文档

™

PolySwitch Resettable Device Short Form Catalog

MAY 2005

www.circuitprotection.com

For over 20 years, Raychem Circuit Protection, a unit of Tyco Electronics, has

pioneered the technology behind PolySwitch™ PPTC (Polymeric Positive

Temperature Coefficient) devices. The use of PPTC devices as a variable resistor

in circuit protection applications was first pioneered by Raychem several

decades ago. They were first used to help protect nickel-cadmium battery packs

against excessive discharge and are still being used in that application today.

For the latest product information please

visit us at:

www.circuitprotection.com

www.circuitprotection.com.hk (Chinese)

www.raychem.co.jp/polyswitch (Japanese)

Raychem Circuit Protection PolySwitch devices are commonly called resettable

devices to distinguish them from traditional one-shot fuses that work only once

and then must be replaced—an expensive and inconvenient proposition. While

the generic term for these devices is “resettable fuses”, technically they are not

fuses but actually non-linear thermistors.

Americas:

Europe:

Asia Pacific: 852-2738-3401

Japan: 81-44-900-5110

(800) 227-7040 or (650) 361-6900

32-16-35 1321

Designed for use in a wide range of electronic devices, these thermistor-type

devices limit the flow of dangerously high current during fault conditions. But

unlike traditional fuses that work one time and must be replaced, Raychem

Circuit Protection’s PPTC devices reset after the fault is cleared and power to the

circuit is removed. This reduces service and repair costs, resulting in improved

customer satisfaction and reduced warranty costs.

To date, billions of PolySwitch products are used to help protect a wide range of

electronic products in automotive, battery and portable electronics, computer

and peripherals, consumer, industrial, and telecommunication markets. In

addition, Raychem Circuit Protection continues to expand their circuit protection

offerings with Telecom Fuses, ROV Radial-leaded Metal Oxide Varistors, SiBar™

Thyristor surge protectors, Raychem Gas Discharge Tubes for overvoltage

protection, and most recently, Polymer electrostatic discharge (PESD) protection

devices.

Raychem Circuit Protection is recognized as a leader for operational excellence

and customer service. A dedicated direct engineering sales force, world-wide

manufacturing and design centers, and local engineering support help them to

think, manage and share globally, yet act locally, to meet customer needs. They

are in compliance with globally recognized ISO9000 standards and certified to

QS9000 standards.

The division is headquartered in Menlo Park, CA with manufacturing facilities in

California (USA), China, and Japan, with sales offices worldwide.

PolySwitch Resettable Device

Benefits:

Features:

• Reduced warranty and service costs

• Increased reliability

• Superior shock and vibration withstand

• Wide variety of applications

• Remotely resettable

• Testable

• Solid-state

• Variety of form factors

• Low resistance devices available

PolySwitch devices can be used in a wide variety of applications:

Automotive

Consumer

• Actuators and medium motors

• Trace protection

• Loudspeakers

• Satellite video receivers

• Powered outputs

• Electronic control modules

• Telematics

Telecommunications & Networking

• Central office equipment

• Customer premise equipment

• Primary protection: MDF modules,

Network Interface Devices (NIDs)

• xDSL modems and ISDN equipment

• WAN, LAN, T1/E1 equipment

• Cable power passing taps

• UL 60950, Telcordia GR-1089, GR-974

compliant equipment

• Equipment compliant with ITU-T K.20, K.21,

K.45 resistibility recommendations

• Distributed power supplies

Battery Protection

• Lithium cells and battery packs

• Rechargeable battery packs

• Chargers

Computers and Peripherals

• DDC.2 computer video ports

• Hard disk drives/storage devices

• IEEE 1394 ports

• Mouse and keyboard ports

• USB (Universal Serial Bus) ports

• PC (PCMCIA) cards and sockets

• SCSI

What’s New Inside:

• Radial-leaded Products

- RoHS compliant RHE

Industrial

• Surface-mount Products

- RoHS compliant nanoSMD

- RoHS compliant microSMD

- RoHS compliant miniSMD

- RoHS compliant decaSMD

- RoHS compliant SMDH

• Automotive Products

- RoHS compliant AHR

• MOSFET device protection

• Motors, fans, and blowers

• POS equipment

• Process and industrial controls

• Security and fire alarm systems

• Test and measurement equipment

• Transformers

• Power supplies

• Telecom Products

- RoHS compliant TR600

- RoHS compliant TS600

- RoHS compliant TSM600

D E V I C E S F O R A U T O M O T I V E A P P L I C A T I O N S

The AGRF, AHRF, AHS and ASMD series devices are

qualified to operate in automotive environments per

the AEC-Q200 Stress Test Qualification for Passive

Electronics in automotive applications. This specifi-

cation requires devices to pass a rigorous test plan

designed for automotive environments. Raychem

Circuit Protection’s document is PS400.

Figure 1

Figure 2

A

Lead size

AGRF400-1100, AHRF450-1000

Ø 0.81 (0.032)

C

B

20 AWG

Lead size

AGRF1200-1400, AHRF1300-1500

Ø 1.0 (0.04)

A

Side view

End view

(AHS080 only)

C

18 AWG

AGRF: Radial-leaded

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

(A)

Part

number

I_H*

V max. I max.

R min.

R₁max.

R_amax.

A

B

C

R₁max. R_amax. I_T(A) (Vdc)

(A)

(Ω)

(max.)

(typ.)

Fig.

1

AGRF400

AGRF500

AGRF600

AGRF700

AGRF800

AGRF900

AGRF1000

AGRF1100

AGRF1200

AGRF1400

4.0

5.0

3.0

4.3

7.6

9.4

16

100

0.0186

0.0140

0.0095

0.0066

0.0049

0.0041

0.0034

0.0033

0.0030

0.0022

0.0610

0.0340

0.0280

0.0200

0.0175

0.0135

0.0102

0.0089

0.0086

0.0064

0.0850

0.0480

0.0320

0.0220

0.0181

0.0140

0.0106

0.0093

0.0091

0.0067

8.90 (0.35)

10.40 (0.41)

10.70 (0.42)

11.20 (0.44)

12.70 (0.50)

14.00 (0.55)

16.51 (0.65)

17.50 (0.69)

23.50 (0.93)

14.1 (0.56)

15.6 (0.61)

18.4 (0.73)

21.0 (0.83)

22.2 (0.88)

23.0 (0.91)

25.7 (1.01)

26.5 (1.04)

28.8 (1.14)

28.7 (1.13)

5.08 (0.20)

10.90 (0.43)

1

6.0

5.3

10.7

13.2

15.0

16.5

18.5

20.3

22.1

27.3

1

7.0

6.5

1

8.0

7.6

1

9.0

8.6

1

10.0

11.0

12.0

14.0

9.6

1

10.5

11.5

13.0

1

* Hold current @ 25°C.

AHRF: High Temp Radial-leaded

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

(A)

Part

number

I_H*

V max. I max.

R min.

R₁max.

R_amax.

A

B

C

R₁max. R_amax. I_T(A) (Vdc)

(A)

(Ω)

(max.)

(typ.)

Fig.

1

AHRF450

AHRF600

AHRF650

AHRF750

AHRF900

AHRF1000

AHRF1300

AHRF1500

4.5

6.0

4.5

6.0

8.7

12.0

13.7

14.8

18.5

20.5

27.0

33.0

16

100

0.0170

0.0100

0.0090

0.0074

0.0061

0.0051

0.0034

0.0027

0.054

0.032

0.026

0.022

0.012

0.015

0.010

0.0063

0.054

0.032

0.026

0.022

0.0170

0.015

0.010

0.0092

10.4 (0.41)

11.2 (0.44)

12.7 (0.50)

14.0 (0.55)

16.5 (0.65)

17.5 (0.69)

23.5 (0.93)

15.6 (0.61)

21.0 (0.83)

22.2 (0.88)

23.5 (0.93)

25.7 (1.01)

26.5 (1.04)

28.7 (1.13)

5.08 (0.20)

10.90 (0.43)

1

6.5

1

7.5

1

New

9.0

1

10.0

13.0

15.0

10.0

13.0

15.0

1

* Hold current @ 25°C.

AHS: High Temp Surface-mount

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

(A)

Part

number

I_H

V max. I max.

R min.

R₁max.

R_amax.

A

B

C

R₁max. R_amax. I_T(A) (Vdc)

(A)

70

(Ω)

0.130

0.050

(Ω)

0.550

0.150

(Ω)

0.550

0.150

(max.)

(typ.)

Fig.

2

AHS080-2018 0.80

AHS160 1.60

0.80

1.60

2.00

3.20

16

5.44 (0.214)

9.40 (0.370)

1.52 (0.060) 4.93 (0.194)

3.00 (0.118) 6.71 (0.264)

2

ASMD: Surface-mount

ELV Compliant

Dimensions (millimeters/inches)

(A)

Part

number

I_H

V max. I max.

R min.

R₁max.

R_amax.

A

B

C

R₁max. R_amax. I_T(A) (Vdc)

(A)

10

40

(Ω)

(max.)

Fig.

2

ASMD030

ASMD050

ASMD075

ASMD100

ASMD125

ASMD150

ASMD200

ASMD250

0.23

0.39

0.60

0.90

1.04

1.27

1.73

1.97

0.59

0.98

1.48

2.16

2.46

2.95

3.93

5.00

60

30

15

0.980

0.290

0.098

0.057

0.049

0.050

0.035

4.800

1.400

1.000

0.480

0.250

0.120

0.085

4.800

1.400

1.000

0.480

0.250

0.120

0.085

7.98 (0.314)

9.40 (0.370)

3.18 (0.125) 5.44 (0.214)

3.00 (0.118) 5.44 (0.214)

3.00 (0.118) 6.71 (0.264)

0.39

2

0.60

2

0.900

1.040

1.270

1.730

1.970

2

1

R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S

240V

ELV Compliant, RoHS Compliant

Figure 1

Figure 2

Figure 3

Figure 4

A

The LVR series is the first PolySwitch device family

A

CALIPER

Lead size

CALIPER

designed for use at line voltages of 120V to

AC

LVR005-016

Ø 0.51 (0.020)

24 AWG

LVR025–040

Ø 0.64 (0.025)

22 AWG

B

CALIPER

B

240V . They may be used to help provide primary

AC

B

CALIPER

side protection of chargers, power supplies, and con-

trol transformers in many industrial, commercial and

consumer applications. They are also appropriate to

help protect many 120V or 240V motors. In

LVR055

Ø 0.81 (0.032)

20 AWG

C

AC

C

center-to-center

addition, the LVR series is RoHS compliant.

Dimensions (millimeters/inches)

I max.

V max. 135Vac/240Vac R₁max.

Part

number

I_H

(A)

I_T

(A)

Agency

recognition

A

B

C

(Vac)

240

(A)

(Ω)

65.0

26.0

12.0

7.8

(max.)

(nom.)

Fig.

1

LVR005K

LVR005S

LVR008K

LVR008S

LVR012K

LVR012S

LVR016K

LVR016S

LVR025K

LVR025S

LVR033K

LVR033S

LVR040K

LVR040S

LVR055K

LVR055S

0.05

0.08

0.12

0.16

0.25

0.33

0.40

0.55

0.12

0.19

0.30

0.37

0.56

0.74

0.90

1.25

20/1.0

20/1.2

20/2.0

20/3.5

20/4.5

20/5.5

UL, TÜV, CSA

8.3 (0.33)

9.9 (0.39)

9.6 (0.38)

11.4 (0.45)

11.5 (0.46)

14.0 (0.55)

12.9 (0.51)

10.7 (0.43)

12.9 (0.51)

10.7 (0.43)

12.9 (0.51)

10.7 (0.43)

13.8 (0.54)

12.5 (0.50)

18.8 (0.74)

17.4 (0.69)

19.0 (0.75)

16.5 (0.65)

20.9 (0.82)

19.5 (0.77)

21.7 (0.85)

5.08 (0.20)

2

1

2

1

2

1

7.8

1

3.8

3

3.8

4

1.24

3

1.24

1.9

4

3

1.9

4

1.45

3

4

60V – 72V

ELV Compliant, RoHS Compliant

Figure 5

Figure 6

Figure 7

A

The RXEF series devices offer hold currents ranging

from 50mA to 3.75A while offering voltage ratings of

60V to 72V. The RXEF products are used in a wide

range of applications such as power input, and I/O

port protection. They are also used in many markets

including computer/multimedia, industrial equipment

and controls, consumer, general electronics and com-

munications and networking.

A

Lead size

RXEF005

Ø 0.40 (0.016)

26 AWG

Lead size

RXEF010–090

Ø 0.51 (0.020)

24 AWG

RXEF110-375

Ø 0.81 (0.032)

20 AWG

B

C

Dimensions (millimeters/inches)

Part

number

I_H

(A)

I_T

(A)

V max.

(V)

I max.**

(A)

R₁max.

(Ω)

Agency

recognition

A

B

C

(max.)

(nom.)

Fig.

5

RXEF005

RXEF010

RXEF017

RXEF020

RXEF025

RXEF030

RXEF040

RXEF050

RXEF065

RXEF075

RXEF090

RXEF110

RXEF135

RXEF160

RXEF185

RXEF250

RXEF300

RXEF375

0.05

0.10

0.17

0.20

0.25

0.30

0.40

0.50

0.65

0.75

0.90

1.10

1.35

1.60

1.85

2.50

3.00

3.75

0.10

0.20

0.34

0.40

0.50

0.60

0.80

1.00

1.30

1.50

1.80

2.20

2.70

3.20

3.70

5.00

6.00

7.50

60

72

40

20.00

7.50

8.00

4.40

3.00

2.10

1.29

1.17

0.72

0.60

0.47

0.38

0.30

0.22

0.19

0.13

0.10

0.08

UL, TÜV, CSA

8.0 (0.32)

7.4 (0.29)

7.6 (0.30)

7.9 (0.31)

9.4 (0.37)

10.2 (0.40)

11.2 (0.44)

12.8 (0.50)

14.5 (0.57)

16.3 (0.64)

17.5 (0.69)

20.8 (0.82)

23.9 (0.94)

27.2 (1.07)

8.3 (0.33)

11.6 (0.46)

12.7 (0.50)

11.7 (0.46)

12.7 (0.50)

13.5 (0.53)

13.7 (0.54)

14.5 (0.57)

15.2 (0.60)

15.8 (0.62)

17.5 (0.69)

19.1 (0.75)

20.8 (0.82)

22.4 (0.88)

25.4 (1.00)

28.6 (1.13)

31.8 (1.25)

5.08 (0.20)

10.90 (0.43)

6

7

** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.

2

R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S

33V

ELV Compliant, RoHS Compliant

Figure 8

A

Lead size

The RTEF series devices offer a 33V rating and

tighter trip-to-hold ratios than other radial-leaded

devices to help comply with the IEEE 1394 specifi-

cation. These devices can also be used in other

applications where the benefit of a tighter trip-to-

hold ratio is desired.

RTEF120–190

Ø 0.51 (0.020)

24 AWG

B

C

Dimensions (millimeters/inches)

Part

number

I_H

(A)

I_T

(A)

V max.

(V)

I max.**

(A)

R₁max.

(Ω)

0.180

0.143

0.092

Agency

recognition

A

B

C

(max.)

(nom.)

Fig.

8

RTEF120

RTEF135

RTEF190

1.20

1.35

1.90

2.3

2.5

3.0

33

40

UL, TÜV, CSA

7.4 (0.29)

8.9 (0.35)

12.2 (0.48)

14.2 (0.56)

13.5 (0.53)

5.08 (0.20)

8

** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.

30V

ELV Compliant, RoHS Compliant

Figure 9

Figure 10

Lead size

A

Lead size

A

The RUEF series devices offer hold currents from

900mA to 9.0A. They are used in many markets

including computer/multimedia, industrial equipment

and controls, as well as consumer and general

electronics.

RUEF090–250

Ø 0.51 (0.020)

24 AWG

RUEF300–900

Ø 0.81 (0.032)

20 AWG

B

C

Dimensions (millimeters/inches)

Part

number

I_H

(A)

I_T

(A)

V max.

(V)

I max.**

(A)

R₁max.

(Ω)

Agency

recognition

A

B

C

(max.)

(nom.)

Fig.

9

RUEF090

RUEF110

RUEF135

RUEF160

RUEF185

RUEF250

RUEF300

RUEF400

RUEF500

RUEF600

RUEF700

RUEF800

RUEF900

0.90

1.10

1.35

1.60

1.85

2.50

3.00

4.00

5.00

6.00

7.00

8.00

9.00

1.8

2.2

30

40

0.22

0.17

0.13

0.11

0.09

0.07

0.08

0.05

0.04

0.03

0.02

UL, TÜV, CSA

7.4 (0.29)

8.9 (0.35)

10.2 (0.40)

11.4 (0.45)

14.0 (0.55)

16.5 (0.65)

19.1 (0.75)

21.6 (0.85)

24.1 (0.95)

12.2 (0.48)

14.2 (0.56)

13.5 (0.53)

15.2 (0.60)

15.7 (0.62)

18.3 (0.72)

17.3 (0.68)

20.1 (0.79)

24.9 (0.98)

26.7 (1.05)

29.2 (1.15)

29.7 (1.17)

5.08 (0.20)

10.90 (0.43)

9

2.7

9

3.2

9

3.7

9

5.0

9

6.0

10

8.0

10.0

12.0

14.0

16.0

18.0

** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.

3

R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S

16V High Temperature

ELV Compliant, RoHS Compliant

The RHEF series devices offer a high operating tem-

perature (up to 125C) and the broadest range of hold

currents available in the radial-leaded form factor

(70mA to 15A). The RHEF series devices can also be

advantageous for use in standard operating tempera-

tures of up to 85C because they have a flatter thermal

derating curve than other radial-leaded devices. Over

the same temperature range, the trip-to-hold ratio is

lower for an RHEF device compared with other PPTC

devices.

Figure 12

Figure 11

Figure 13

A

Lead size

RHEF070

Ø 0.51 (0.020)

24 AWG

Lead size

RHEF050, 100, 200

Ø 0.51 (0.020)

24 AWG

RHEF400-1000

Ø 0.81 (0.032)

20 AWG

B

RHEF1300,

RHEF1500

Ø 1.0 (0.04)

18 AWG

C

Dimensions (millimeters/inches)

Part

number

I_H*

(A)

I_T

(A)

V max.

(Vdc)

I max.**

(A)

R₁max.

(Ω)

Agency

recognition

A

B

C

(max.)

(nom.)

Fig.

RHEF 30V

RHEF050

RHEF070

RHEF100

RHEF 16V

RHEF200

RHEF400

RHEF450

RHEF600

RHEF650

RHEF750

RHEF900

RHEF1000

RHEF1300

RHEF1500

0.5

0.7

1.0

0.92

1.4

30

40

1.1

UL, TÜV, CSA

7.4 (0.29)

6.9 (0.27)

9.7 (0.38)

12.7 (0.50)

10.8 (0.43)

13.6 (0.54)

5.08 (0.20)

11

12

11

0.8

1.8

0.43

New

2.0

4.0

3.8

7.0

7.8

16

100

0.110

0.044

0.054

0.032

0.026

0.022

0.017

0.015

0.010

0.0092

UL, TÜV, CSA

9.40 (0.37)

14.4 (0.57)

18.0 (0.71)

15.6 (0.61)

21.0 (0.83)

22.2 (0.88)

23.5 (0.93)

25.7 (1.01)

26.5 (1.04)

28.7 (1.13)

5.08 (0.20)

10.90 (0.43)

11

13

11.40 (0.45)

10.40 (0.41)

11.20 (0.44)

12.70 (0.50)

14.00 (0.55)

16.50 (0.65)

17.50 (0.69)

23.50 (0.925)

4.5

6.0

10.8

6.5

12.0

13.1

16.5

18.5

24.0

28.0

7.5

9.0

10.0

13.0

15.0

New

* Hold current @ 25°C.

** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.

16V High Temperature

ELV Compliant, RoHS Compliant

The RGEF series devices are rated for 16V and have

hold current ranges of 2.5A to 14A. These parts are

smaller and trip faster than the RUEF devices with the

same hold currents. In addition, they have tight trip-to-

hold ratios. If the application requires 16V rather than

30V and there are limitations on space, the RGEF

devices can be the preferred choice. Like the RXEF

and RUEF series devices, the RGEF devices are

used in many markets including computer/multimedia,

industrial equipment and controls, consumer and

general electronics, as well as motor protection.

Figure 14

Figure 15

A

Lead size

RGEF250

Ø 0.51 (0.020)

24 AWG

Lead size

RGEF300-RGE1100

Ø 0.81 (0.032)

20 AWG

B

RGEF1200-RGE1400

Ø 1.0 (0.04)

18 AWG

C

Dimensions (millimeters/inches)

Part

number

I_H*

(A)

I_T

(A)

V max.

(Vdc)

I max.**

(A)

R₁max.

(Ω)

0.0530

Agency

recognition

A

B

C

(max.)

(nom.)

Fig.

14

15

RGEF250

RGEF300

RGEF400

RGEF500

RGEF600

RGEF700

RGEF800

RGEF900

RGEF1000

RGEF1100

RGEF1200

RGEF1400

2.5

3.0

4.7

5.1

16

100

UL, TÜV, CSA

8.9 (0.35)

7.1 (0.28)

8.9 (0.35)

12.8 (0.50)

11.0 (0.43)

12.8 (0.50)

14.3 (0.56)

17.1 (0.67)

19.7 (0.78)

20.9 (0.82)

21.7 (0.85)

25.2 (0.99)

26.0 (1.02)

28.0 (1.10)

27.9 (1.10)

5.08 (0.20)

10.90 (0.43)

0.0980

0.0600

0.0340

0.0280

0.0220

0.0175

0.0135

0.0102

0.0089

0.0086

0.0064

4.0

6.8

5.0

8.5

10.4 (0.41)

10.7 (0.42)

11.2 (0.44)

12.7 (0.50)

14.0 (0.55)

16.5 (0.65)

17.5 (0.69)

23.5 (0.92)

6.0

10.2

11.9

13.6

15.3

17.0

18.7

20.4

23.8

7.0

8.0

9.0

10.0

11.0

12.0

14.0

* Hold current @ 25°C.

** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.

4

R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S

16V High Temperature

ELV Compliant, RoHS Compliant

Figure 16

The RUSBF series devices were developed for the

USB serial bus specification in computer and multi-

media applications.

A

Lead size

Ø 0.51 (0.020)

24 AWG

B

C

Dimensions (millimeters/inches)

Part

number

I_H

(A)

I_T

(A)

V max.

(V)

I max.**

(A)

R₁max.

(Ω)

Agency

recognition

A

B

C

(max.)

(nom.)

Fig.

16

RUSBF090

RUSBF110

RUSBF135

RUSBF160

RUSBF185

RUSBF250

0.90

1.10

1.35

1.60

1.85

2.50

1.8

2.2

2.7

3.2

3.7

5.0

16

40

0.18

0.14

0.12

0.11

0.09

0.06

UL, TÜV, CSA

7.4 (0.29)

8.9 (0.35)

10.2 (0.40)

11.4 (0.45)

12.2 (0.48)

14.2 (0.56)

13.5 (0.53)

15.2 (0.60)

15.7 (0.62)

18.3 (0.72)

5.08 (0.20)

** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.

6V

ELV Compliant, RoHS Compliant

Figure 17

The RUSBF series devices were developed for the

A

USB serial bus specification in computer and multi-

media applications. These 6V products are particular-

ly well suited for USB computer monitor protection

applications where through-hole devices are still the

preferred solution.

Lead size

Ø 0.51 (0.020)

24 AWG

B

C

Dimensions (millimeters/inches)

Part

number

I_H

(A)

I_T

(A)

V max.

(V)

I max.**

(A)

R₁max.

(Ω)

0.23

0.14

0.10

Agency

recognition

A

B

C

(max.)

(nom.)

Fig.

17

RUSBF075

RUSBF120

RUSBF155

0.75

1.20

1.55

1.30

2.00

2.65

6

40

UL, TÜV, CSA

6.9 (0.27)

11.4 (0.45)

11.7 (0.46)

5.08 (0.20)

17

** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.

5

T E L E C O M A N D B R O A D B A N D P R O D U C T S

These product lines consist of radial-leaded and

surface-mount devices that help protect against short

duration high voltage faults (250-600Vrms). TR and

TS products are designed to help meet the protection

needs of telecommunications applications. BBR

devices help provide overcurrent protection of the

power tap in hybrid-coaxial applications.

Figure 2

Figure 1

A

C

A

E

B

D

φ 0.65mm

E

TR250

Part

number

I_H

(A)

I_T

(A)

V max. Operating V max. Interrupt

I max.

(A)

R min.

(Ω)

R max.

(Ω)

22.0

20.0

9.0

R₁max.

(Ω)

Agency

recognition

(Vdc)

60

100

(Vrms)

250

Fig.

1

TR250-080T

TR250-080U

TR250-110U

TR250-120

0.080

0.110

0.120

0.130

0.120

0.145

0.180

0.160

0.220

0.240

0.290

0.650

3.0

10.0

15.0

14.0

5.0

4.0

7.0

5.4

6.0

8.0

6.0

7.0

3.0

4.5

5.4

3.5

0.8

33.0

16.0

14.0

16.0

14.0

12.0

14.0

12.0

4.0

UL, TÜV, CSA

1

8.0

2

TR250-120T

TR250-120T-RA

TR250-120T-RC

TR250-120T-RF

TR250-120T-R1

TR250-120T-R2

TR250-120U

TR250-120UT

TR250-145

12.0

9.0

2

7.5

2

10.5

9.0

2

10.5

10.0

12.0

6.0

2

TR250-145-RA

TR250-145-RB

TR250-145T

TR250-145U

TRF250-180†

5.5

2

6.0

2

7.5

2

6.5

2

2.2

1

These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for

application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details.

† F is for RoHS compliant devices.

Dimensions (millimeters/inches)

Part

number

A

B

C

D

(min.)

E

(typ.)

(max.)

Fig.

1

TR250-080T

TR250-080U

TR250-110U

TR250-120

5.8 (0.228)

4.8 (0.189)

5.3 (0.210)

6.5 (0.256)

6.0 (0.236)

6.5 (0.256)

6.0 (0.236)

9.0 (0.354)

9.9 (0.390)

9.3 (0.366)

9.4 (0.370)

11.0 (0.433)

10.0 (0.394)

11.0 (0.433)

10.0 (0.394)

12.0 (0.472)

4.6 (0.181)

3.8 (0.150)

4.6 (0.180)

3.8 (0.150)

4.6 (0.180)

3.8 (0.150)

4.7 (0.185)

5.0 (0.197)

1

2

TR250-120U

TR250-145

2

TR250-145U

TRF250-180

2

1

6

T E L E C O M A N D B R O A D B A N D P R O D U C T S

TS250

Figure 3

Figure 4

Figure 5

C

A

C

B

C

B

D

A

D

E

A

top view

side view

E

Part

number

I_H

(A)

I_T

(A)

V max. Operating V max. Interrupt

I max.

(A)

R min.

(Ω)

R max.

(Ω)

12.0

9.0

R₁max.

(Ω)

Agency

recognition

(Vdc)

60

80

60

(Vrms)

Fig.

3

TS250-130

0.130

0.080

0.130

0.260

0.160

0.260

250 (650)

250

3.0

6.5

9.0

7.0

6.5

9.0

7.0

5.0

4.0

20.0

15.0

20.0

17.0

20.0

15.0

20.0

17.0

20.0

12.0

UL, TÜV, CSA

TS250-130-RA

TS250-130-RB

TS250-130-RC

TS250-130F

3

12.0

10.0

12.0

9.0

3

Coming Soon

3

TS250-130F-RA

TS250-130F-RB

TS250-130F-RC

TSL250-080

3

12.0

10.0

11.0

7.0

3

4

Coming Soon

TSL250-080F

TSV250-130

250

4

250

5

TSV250-130F

250

7.0

5

These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for

application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details.

Dimensions (millimeters/inches)

Part

number

A

B

C

D

(typ.)

(max.)

Fig.

3

TS250-130

9.4 (0.370)

3.4 (0.135)

7.4 (0.290)

0.3 (0.011)

TS250-130-RA

TS250-130-RB

TS250-130-RC

TS250-130F

3

Coming Soon

3

TS250-130F-RA

TS250-130F-RB

TS250-130F-RC

3

Dimensions (millimeters/inches)

Part

number

A

B

C

D

E

(max.)

Fig.

4

TSL250-080

TSL250-080F

TSV250-130

TSV250-130F

7.9 (0.310)

6.1 (0.240)

3.7 (0.145)

6.9 (0.270)

5.3 (0.210)

3.0 (0.126)

0.4 (0.015)

1.9 (0.075)

3.1 (0.120)

2.3 (0.091)

Coming Soon

4

5

TR600

Figure 6

A

C

B

φ 0.65mm

D

E

Part

number

I_H

(A)

I_T

(A)

V max. Operating V max. Interrupt

I max.

(A)

R min.

R max.

R₁max.

Agency

recognition

(Vdc)

250

(Vrms)

(Ω)

6.0

9.0

4.0

(Ω)

10.0

12.0

10.0

7.0

(Ω)

17.0

20.0

18.0

16.0

17.0

Fig.

6

TRF600-150*

TRF600-150-RB*

TR600-160

0.150

0.130

0.160

0.300

0.260

0.320

600

3.0

Pending

UL, CSA

New

600

6

600

6

TR600-160-RA

TR600-160-R1

600

6

600

8.0

6

These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for

application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details.

* These parts are RoHS compliant. TRF600-150 replaces TR600-150 and TR600-150-RA devices in new designs. TRF600-150-RB replaces TR600-150-RB devices in new designs.

Dimensions (millimeters/inches)

Part

number

A

B

C

D

(min.)

E

(max.)

Fig.

6

TRF600-150*

9.0 (0.354)

12.5 (0.492)

12.6 (0.496)

4.6 (0.180)

6.0 (0.236)

4.7 (0.185)

5.0 (0.197)

TR600-160

16.0 (0.630)

6

* This part is RoHS compliant and replaces TR600-150 and TR600-150-RA devices in new designs.

7

T E L E C O M A N D B R O A D B A N D P R O D U C T S

TS600

Figure 7

Figure 8

C

B

F

D

E

A

G

Part

number

I_H

(A)

I_T

(A)

V max. Operating V max. Interrupt

I max.

(A)

R min.

(Ω)

R max.

(Ω)

9.0

7.5

9.0

7.5

R₁max.

(Ω)

Agency

recognition

(Vdc)

(Vrms)

600

Fig.

7

TS600-170

0.170

0.200

0.170

0.200

0.250

0.400

0.860

60

3.0

4.0

1.0

18.0

13.5

18.0

13.5

7.0

UL, CSA

TS600-200-RA-B-0.5

New TS600-170F*

New TS600-200F-RA-B-0.5*

TSM600-250

60

7

60

7

60

7

250

3.5 (typ.)

8

TSM600-250-RA

New TSM600-250F*

New TSM600-250F-RA*

3.0 (typ.)

3.5 (typ.)

3.0 (typ.)

5.0

8

7.0

8

5.0

8

These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for

application details.

* These parts are the RoHS compliant versions; they should be used for new designs.

Dimensions (millimeters/inches)

Part

number

A

B

C

(max.)

Fig.

7

TS600-170

19.4 (0.765)

12.3 (0.485)

8.3 (0.325)

TS600-200-RA-B-0.5

TS600-170F*

7

New

7

TS600-200F-RA-B-0.5*

7

* These parts are the RoHS compliant versions; they should be used for new designs.

Dimensions (millimeters/inches)

Part

number

A

B

C

D

E

F

G

(min.)

(max.)

Fig.

8

TSM600-250

17.6 (0.691)

11.7 (0.460)

11.2 (0.440)

5.2 (0.230)

2.8 (0.111)

1.0 (0.038)

2.0 (0.080)

TSM600-250-RA

TSM600-250F*

TSM600-250F-RA*

8

New

8

BBR

Figure 9

A

Lead size

Ø 0.81 (0.032)

20 AWG

B

D

C

Part

number

I_H

(A)

I_T

(A)

V max.

(Vdc)

I max.

R min.

(Ω)

0.80

0.40

R max.

(Ω)

1.30

0.75

R₁max.

(Ω)

1.95

1.20

Agency

recognition

(A)

20

Fig.

9

BBR550

BBR750

0.55

0.75

1.1

1.5

99

UL, CSA

99

9

These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for

application details.

Dimensions (millimeters/inches)

Part

number

A

B

C

D

(min.)

(max.)

(nom.)

Fig.

9

BBR550

BBR750

10.9 (0.43)

11.9 (0.47)

14.0 (0.55)

15.5 (0.61)

5.80 (0.23)

7.6 (0.3)

9

8

S U R F A C E - M O U N T D E V I C E S F O R E L E C T R O N I C A P P L I C AT I O N S

These product lines are designed for surface-mount

applications. The variety of sizes enables installation

in limited space applications such as crowded printed

circuit boards, digital cameras, PC cards, subnotebook

computers, computer peripheral equipment, and

general electronics. These devices are designed for

applications where such space is constrained and

resettable circuit protection is desired.

Figure 1

D

E

D

E

C

A

B

Top view

Side view

nanoSMDC Series Size: 3216 (mm), 1206 (mils)

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

Part

I

I_T

V max. I max.

R

R max. Agency

1

A

B

C

D

E

H

min

number

(A)

(Vdc)

30

24

16

13.2

6

(A)

(Ω)

1.40

1.10

0.65

0.45

0.20

0.12

0.07

0.04

0.02

(Ω)

6.50

5.00

2.60

1.40

0.80

0.40

0.20

0.11

0.07

recognition

(max.)

(min.)

Fig.

1

Coming Soon nanoSMDC012F*

Coming Soon nanoSMDC016F*

nanoSMDC020F

0.12

0.16

0.20

0.35

0.30

0.40

0.42

0.75

1.10

1.50

2.20

3.00

4.00

10

Pending

3.4 (0.134)

1.00 (0.039) 1.8 (0.071)

0.64 (0.025) 1.8 (0.071)

0.48 (0.019) 1.8 (0.071)

1.00 (0.039) 1.8 (0.071)

0.89 (0.035) 1.8 (0.071)

1.25 (0.049) 1.8 (0.071)

0.25 (0.010) 0.076 (0.003)

10

Pending

1

100

UL, TÜV, CSA

Pending

1

nanoSMDC035F

20

100

1

nanoSMDC050F/13.2 0.50

1

nanoSMDC075F

nanoSMDC110F

0.75

1.10

1.50

2.00

1

6

1

nanoSMDC150F

6

1

Coming Soon nanoSMDC200F*

6

1

* Data is preliminary.

microSMD Series Size: 3225 (mm), 1210 (mils)

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

Part

I

I_T

V max. I max.

R

R max. Agency

1

A

B

C

D

E

H

min

number

(A)

(Vdc)

30

6

(A)

10

40

(Ω)

recognition

(max.)

(min.)

Fig.

1

microSMD005F

microSMD010F

microSMD035F

microSMD050F

microSMD075F

microSMD110F

0.05

0.10

0.35

0.50

0.75

1.10

1.50

1.75

0.15

0.25

0.75

1.00

1.50

2.20

3.00

3.50

3.6

50.0

15.00

1.30

0.90

0.40

0.21

0.11

0.08

UL, TÜV, CSA

3.43 (0.135) 0.85 (0.034) 2.80 (0.110) 0.25 (0.010) 0.20 (0.008)

3.43 (0.135) 0.62 (0.025) 2.80 (0.110) 0.25 (0.010) 0.20 (0.008)

3.43 (0.135) 0.48 (0.019) 2.80 (0.110) 0.25 (0.010) 0.20 (0.008)

3.43 (0.135) 1.22 (0.048) 2.80 (0.110) 0.25 (0.010) 0.20 (0.008)

3.43 (0.135) 0.76 (0.030) 2.80 (0.110) 0.25 (0.010) 0.20 (0.008)

2.10

0.32

0.25

0.11

0.07

0.04

0.02

1

13.2

6

1

6

1

microSMD150F

New microSMD175F

6

1

6

1

miniSMDC Series Size: 4532 (mm), 1812 (mils)

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

Part

I

I_T

V max. I max.

R

R max. Agency

1

A

B

C

D

E

H

min

number

(A)

(Vdc)

60

30

24

13.2

24

8

(A)

(Ω)

recognition

(max.)

(min.)

Fig.

1

miniSMDC014F

miniSMDC020F

0.14

0.20

0.50

0.75

1.10

1.25

1.50

1.60

2.00

2.60

0.34

0.40

1.00

1.50

2.20

2.50

3.00

3.20

4.00

5.00

10

1.500

0.600

0.150

0.110

0.090

0.040

0.060

0.050

0.040

0.030

0.020

0.015

6.000

3.300

1.000

0.450

0.290

0.210

0.180

0.140

0.110

0.120

0.100

0.070

0.043

0.047

UL, TÜV, CSA

Pending

4.73 (0.186) 0.89 (0.035) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 0.62 (0.025) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 1.07 (0.042) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 0.62 (0.025) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 0.48 (0.019) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 1.07 (0.042) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 0.48 (0.019) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 1.50 (0.060) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 0.48 (0.019) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 1.22 (0.048) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

4.73 (0.186) 1.25 (0.050) 3.41 (0.134) 0.25 (0.010) 0.20 (0.008)

10

1

miniSMDC050F

100

40

1

miniSMDC075F

1

New miniSMDC075F/24

miniSMDC110F

1

100

20

1

miniSMDC110F/16

16

24

6

1

New

miniSMDC110F/24

miniSMDC125F

miniSMDC125F/16

miniSMDC150F

miniSMDC150F/12

miniSMDC150F/24

miniSMDC160F

miniSMDC200F

miniSMDC260F

miniSMDC260F/12

1

100

20

1

16

6

1

New

12

24

9

1

100

1

8

1

6

1

12

16

1

Coming Soon miniSMDC260F/16*

* Data is preliminary.

1

miniSMDE Series Size: 11550 (mm), 4420 (mils)

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

Part

I

I_T

V max. I max.

R

R max. Agency

1

A

B

C

D

E

H

min

number

(A)

(Vdc)

(A)

(Ω)

recognition

(max.)

(min.)

Fig.

New

miniSMDE190F

1.90

3.80

16

100

0.024

0.080

UL, TÜV, CSA

11.51 (0.453) 0.53 (0.021) 5.33 (0.210) 0.510 (0.020) 0.381 (0.015)

1

9

S U R F A C E - M O U N T D E V I C E S F O R E L E C T R O N I C A P P L I C AT I O N S

These product lines are also designed for surface-

mount applications. The products range in hold cur-

rents from 0.3A to 3.0A and voltages from 6V to 60V.

These devices are suited for high-density board appli-

cations in computer and computer peripheral products,

telecommunications, and general electronics applica-

tions. They are designed to be reflowed onto a printed

circuit board using standard surface-mount processes.

Figure 2

C

B

A

Side view

End view

(midSMD products only)

midSMD Series Size: 5050 (mm), 2018 (mils)

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

Part

I

I_T

V max. I max.

R

R max. Agency

1

A

B

C

D

E

H

min

number

(A)

(Vdc)

(A)

20

10

40

(Ω)

2.30

1.10

0.40

0.18

0.10

recognition

(max.)

(min.)

Fig.

2

SMD030F-2018

decaSMDC050F/60

SMD100F-2018

SMD150F-2018

SMD200F-2018

0.30

0.55

1.10

1.50

2.00

0.80

1.10

2.20

3.00

4.20

60

0.500

0.40

UL, TÜV, CSA

5.44 (0.214) 1.78 (0.070) 4.93 (0.194)

New

60

5.31 (0.209) 0.89 (0.035) 4.80 (0.189) 0.25 (0.010) 0.20 (0.008)

5.44 (0.214) 1.52 (0.060) 4.93 (0.194)

1

15

0.100

0.070

0.048

2

15

5.44 (0.214) 1.52 (0.060) 4.93 (0.194)

2

6

5.44 (0.214) 1.52 (0.060) 4.93 (0.194)

2

SMD Series Size: 7555 (mm), 2920 (mils)

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

Part

I

I_T

V max. I max.

R

R max. Agency

1

A

B

C

H

min

number

(A)

(Vdc)

60

30

60

30

33

16

15

6

(A)

10

40

10

40

50

40

(Ω)

recognition

UL, TÜV, CSA

Pending

(max.)

Fig.

2

SMD030F

SMD050F

0.30

0.50

0.75

1.10

1.20

1.25

2.60

3.00

0.60

1.00

1.50

2.20

1.50

2.50

5.20

6.00

1.20

4.800

1.400

1.000

0.480

0.410

0.340

0.250

0.075

0.048

7.98 (0.314) 3.18 (0.125) 5.44 (0.214)

7.98 (0.314) 3.00 (0.118) 5.44 (0.214)

0.350

0.120

0.150

0.070

0.025

0.015

2

SMD075F

2

SMD075F/60

SMD100F

2

SMD100F/33

New SMDH120

SMD125F

2

UL, TÜV, CSA

2

SMD260F

2

SMD300F

6

2

SMD2 Series Size: 8763 (mm), 3425 (mils)

ELV Compliant, RoHS Compliant

Dimensions (millimeters/inches)

Part

I

I_T

V max. I max.

R

R max. Agency

1

A

B

C

H

min

number

(A)

(Vdc)

(A)

40

70

40

(Ω)

recognition

UL, TÜV, CSA

Pending

(max.)

Fig.

2

SMD150F

SMD150F/33

SMDH160

SMD185F

SMD200F

SMD250F

1.50

1.60

1.80

2.00

2.50

3.00

3.20

3.60

4.00

5.00

15

0.060

0.080

0.050

0.065

0.050

0.035

0.250

0.230

0.150

0.165

0.125

0.085

9.40 (0.370) 3.00 (0.118) 6.71 (0.264)

33

2

16

2

33

UL, TÜV, CSA

2

15

2

15

2

10

D E V I C E S F O R B A T T E R Y P A C K A P P L I C A T I O N S

VLR: 85˚C Typical Activation

ELV Compliant, RoHS Compliant

This product line is designed for battery

pack applications. Several material plat-

forms are available to help meet the spe-

cific protection needs of different cell

chemistries (e.g. Li-ion, NiMH, and NiCd).

A variety of space efficient form factors

helps the designer minimize pack size.

Figure 1

Figure 2

Figure 3

Slit: 0.5 mm x 4.0 mm nom.

.02 in x .16 in

A

C

A

C

B

Top View

Side View

Top View

Side View

Top View

Side View

Dimensions (millimeters/inches)

Part

number

I_H*

(A)

I_T

(A)

V max.

(Vdc)

I max.

R max. initial

Agency

recognition

A

B

C

(A)

100

(Ω)

(max.)

Fig.

1

VLR170F

1.7

4.1

4.2

5

12

0.032

0.031

0.018

UL, TÜV, CSA

23.2 (0.913)

41.2 (1.622)

23.2 (0.913)

24.5 (0.965)

31.7 (1.248)

24.5 (0.96)

23.1 (0.909)

27.7 (1.091)

23.1 (0.909)

3.9 (0.153)

3.7 (0.146)

3.3 (0.130)

3.1 (0.12)

0.8 (0.032)

0.7 (0.028)

0.8 (0.032)

0.7 (0.028)

0.8 (0.032)

0.7 (0.028)

VLR170L†

VLR170UF

VLR175F

1.7

1

1.7

3

1.75

2.3

1

VLR175LF

VLR175UF

VLR230F

1

3

5.3 (0.208)

3.9 (0.153)

5.3 (0.208)

5.1 (0.201)

1

VLR230-C36†

VLR230S†

VLR230SU†

VLR230UF

2.3

5

1

2.3

5

2

2.3

5

2

2.3

5

3

* Hold current @ 25°C.

† Please contact Raychem Circuit Protection for RoHS compliant version.

VLP: 90˚C Typical Activation

ELV Compliant, RoHS Compliant

Figure 4

Figure 5

Providing both overcurrent and overtemperature

protection, the low-resistance characteristics of the

VLP devices help battery pack designers lower pack

impedance. In addition, the VLP devices narrow,

low-profile form factor and axial leads allow them

to be welded directly to battery cells, conserving

valuable space in portable electronics applications.

A

C

A

C

B

Top View

Side View

Top View

Side View

Dimensions (millimeters/inches)

Part

number

I_H*

(A)

I_T

(A)

V max.

(Vdc)

I max.

R max. initial

Agency

recognition

A

B

C

(A)

60

(Ω)

(max.)

Fig.

4

VLP210†

VLP220F

VLP270F

2.1

2.2

2.7

5

16

0.030

0.029

0.018

UL, TÜV, CSA

17.5 (0.689)

23.3 (0.917)

23.1 (0.909)

7.3 (0.287)

3.9 (0.154)

5.3 (0.208)

0.8 (0.032)

5.3

6.5

5

* Hold current @ 25°C.

† Please contact Raychem Circuit Protection for RoHS compliant version.

11

D E V I C E S F O R B A T T E R Y P A C K A P P L I C A T I O N S

VTP: 90˚C Typical Activation

ELV Compliant, RoHS Compliant

Figure 6

Figure 7

Figure 8

The conductive polymer composite in

the VTP battery overcurrent protection

devices helps provide increased safety

with extended battery run time. These

devices reach a high-resistance state

at lower temperatures in NiMH and

rechargeable lithium temperature-

sensitive chemistries.

A

C

A

C

B

Top View

Side View

Top View

Side View

Top View

Side View

Figure 10

Figure 11

Figure 9

Slit: 0.5 mm x 4.0 mm nom.

.02 in x .16 in

A

Slit: 0.5 mm x 4.0 mm nom.

.02 in x .16 in

A

C

A

C

B

Top View

Side View

Top View

Side View

Top View

Side View

Dimensions (millimeters/inches)

Part

number

I_H*

(A)

I_T

(A)

V max.

I max.

(A)

R max. initial

(Ω)

Agency

recognition

A

B

C

(Vdc)

16

(max.)

Fig.

11

6

VTP110F

1.1

1.7

1.75

2.0

2.1

2.7

3.4

3.6

4.7

5.9

100

0.070

0.052

0.051

0.039

0.030

0.026

UL, TÜV, CSA

25.6 (1.007)

17.5 (0.689)

22.9 (0.90)

28.0 (1.10)

23.2 (0.91)

23.1 (0.91)

26.0 (1.02)

23.1 (0.91)

32.0 (1.26)

37.0 (1.46)

23.1 (0.91)

25.2 (1.00)

26.2 (1.03)

2.9 (0.114)

7.4 (0.292)

5.3 (0.21)

3.9 (0.15)

3.7 (0.15)

4.5 (0.18)

4.3 (0.17)

5.3 (0.21)

5.1 (0.20)

5.3 (0.21)

0.7 (0.028)

0.8 (0.03)

0.7 (0.03)

0.8 (0.03)

0.7 (0.03)

0.8 (0.03)

VTP170F

VTP170X†

VTP170XSF

VTP175LF

VTP175UF

VTP200GF

VTP200U†

VTP210GF

VTP210LF

VTP210SF

VTP210SLF

8

9

8

11

8

11

8

9

VTP210SL-19.2/5.8† 2.1

9

VTP210SSF

VTP210ULD†

VTP240F

2.1

2.4

10

11

8

* Hold current @ 25°C.

† Please contact Raychem Circuit Protection for RoHS compliant version.

LTP, miniSMDE: 110˚C Typical Activation ELV Compliant, RoHS Compliant

Figure 15

Figure 12

Figure 13

Figure 14

LTP devices help provide reliable,

noncycling protection for recharge-

able batteries. LTP devices also

A

Slit: 0.5 mm x 4.0 mm nom.

.02 in x .16 in

D

E

D

E

Slit: 0.5 mm x 4.0 mm nom.

.02 in x .16 in

A

B

A

C

help provide additional protection

at elevated temperatures.

C

B

Top View

Side View

Top View

Side View

A

B

Top View

Side View

Top View

Side View

Dimensions (millimeters/inches)

Part

number

I_H

(A)

I_T

(A)

V max.

(Vdc)

I max.

(A)

R max. initial

Agency

recognition

A

B

C

(Ω)

(max.)

Fig.

LTP

LTP070†

LTP070SF

LTP100F

LTP100SF

LTP100SL†

LTP100SS†

LTP180F

LTP180LF

LTP180S†

LTP190F

LTP260†

LTP300F

LTP340†

miniSMDE

0.7

1.0

1.8

1.9

2.6

3.0

3.4

1.45

2.5

3.8

4.2

5.2

6.3

6.8

15

24

100

0.200

0.130

0.068

0.057

0.042

0.031

0.027

UL, TÜV, CSA

22.1 (0.87)

23.1 (0.91)

32.0 (1.26)

23.1 (0.91)

26.0 (1.02)

37.5 (1.48)

26.0 (1.02)

23.4 (0.92)

26.0 (1.02)

31.8 (1.25)

26.0 (1.02)

5.2 (0.20)

11.0 (0.43)

11.9 (0.47)

13.5 (0.53)

15.9 (0.63)

1.2 (0.048)

1.0 (0.04)

1.1 (0.04)

1.0 (0.04)

1.1 (0.04)

1.0 (0.04)

12

13

12

13

14

12

13

12

miniSMDE190F 1.9

3.8

16

100

0.040

UL, TÜV, CSA

11.51 (0.453)

0.53 (0.021)

5.33 (0.21)

15

† Please contact Raychem Circuit Protection for RoHS compliant version.

12

D E V I C E S F O R B A T T E R Y P A C K A P P L I C A T I O N S

LR4, SRP: 120˚C Typical Activation

ELV Compliant, RoHS Compliant

Figure 16

Figure 18

Figure 17

The LR4 devices’ smaller thermal mass

means reduced reaction time to over-

current events. The LR4 devices are

suited for battery packs intended for

computer and camcorder applications.

The SRP products help provide reliable,

non-cycling protection for rechargeable

batteries. Weldable nickel leads and a

narrow, low-profile design make these

devices easy to install directly onto

battery cells.

Slit: 0.5 mm x 4.0 mm nom.

.02 in x .16 in

A

C

A

C

A

C

B

Top View

Side View

Top View

Side View

Top View

Side View

Figure 20

Slit: 0.5 mm x 4.0 mm nom.

.02 in x .16 in

A

Figure 21

Slit: 0.5 mm x 4.0 mm nom.

.02 in x .16 in

A

Figure 19

A

B

C

Top View

Side View

Top View

Side View

Top View

Side View

Dimensions (millimeters/inches)

Part

number

I_H

(A)

I_T

(A)

V max.

(Vdc)

I max.

(A)

R max. initial

Agency

recognition

A

B

C

(Ω)

(max.)

Fig.

LR4

LR4-170UF

LR4-190F

LR4-190S†

LR4-260F

LR4-260SF

LR4-380F

LR4-380X†

LR4-450F

LR4-550F

LR4-600F

LR4-600X†

LR4-730F

LR4-880SS†

LR4-900F

LR4-1300SSF

LR4-1410†

SRP

1.7

1.9

2.6

3.8

4.5

5.5

6.0

7.3

8.8

9.0

13.0

14.1

3.4

3.9

15

20

100

0.078

0.072

0.042

0.026

0.020

0.016

0.014

0.012

0.0105

0.010

0.0065

0.005

UL

21.0 (0.83)

22.1 (0.87)

23.1 (0.91)

26.0 (1.02)

35.8 (1.41)

26.0 (1.02)

37.0 (1.46)

26.0 (1.02)

42.7 (1.68)

29.1 (1.15)

65.2 (2.57)

47.6 (1.874)

66.5 (2.62)

60.0 (2.36)

4.0 (0.16)

5.5 (0.22)

7.5 (0.30)

5.5 (0.22)

10.5 (0.41)

7.5 (0.30)

14.5 (0.57)

7.5 (0.30)

14.5 (0.57)

8.5 (0.33)

8.5 (0.335)

10.0 (0.39)

14.0 (0.55)

0.7 (0.03)

1.0 (0.04)

1.3 (0.05)

18

16

17

16

17

16

17

16

17

16

UL, TÜV, CSA

3.9

5.8

8.3

8.9

10.5

11.7

14.1

16

16.7

21.2

26.2

SRP120F

SRP120L†

SRP120SF

SRP175F

SRP175LF

SRP175SF

SRP175SS†

SRP200F

SRP350F

SRP420F

1.2

2.7

3.8

4.4

6.3

7.6

15

30

100

0.160

0.090

0.060

0.031

0.024

UL, TÜV, CSA

22.1 (0.87)

27.1 (1.07)

22.1 (0.87)

23.1 (0.91)

32.1 (1.26)

23.1 (0.91)

23.4 (0.92)

31.8 (1.25)

32.4 (1.28)

5.2 (0.20)

11.0 (0.43)

13.5 (0.53)

13.6 (0.54)

1.0 (0.04)

1.1 (0.04)

19

20

19

20

21

19

1.2

1.75

2.0

3.5

4.2

† Please contact Raychem Circuit Protection for RoHS compliant version.

13

Definitions

Voltage Rating for Telecom Devices

Agency approvals for PolySwitch devices:

I

= Hold current—maximum current at which the

For Raychem Circuit Protection telecom

devices (TC, TGC, TRx, TSx) there are

two applicable voltage ratings. These are

PolySwitch devices, where appropriate,

have been tested and have gained the

following safety agency approvals:

• UL Component Recognition in Category

XGPU2, Thermistor Type Devices

• CSA Component Acceptance Class

9073 32, Thermistors—PTC Type

H

device will not trip under specified conditions at

20°C unless otherwise specified.

V

Operating and V

Interrupt. To

max.

I

= The highest fault current that can safely

help understand the nature of these two

different voltage ratings the following

definitions are provided:

max.

be used to trip a PolySwitch device under

specified conditions.

¨

• TUV Rheinland Certification, PTC

V

= The highest voltage that can safely be

V

Interrupt: Under specified

max.

Resistors

max.

dropped across a PolySwitch device

continuously in its tripped state under specified

fault conditions.

conditions this is the highest voltage

that can be applied to the device at the

maximum current. Devices have been

designed to trip safely under higher power

level cross conditions, as listed above, to

assist equipment in meeting the

®

R max. = Maximum device resistance under

1

®

specified conditions measured 1 hour post trip or

post reflow.

appropriate industry conditions.

R max. = Maximum device resistance under

automotive conditions specified in PS400

measured 1 hour after stress has been removed.

V

Operating: For telecom devices

a

max.

this is the voltage we have used to obtain

component recognition under UL1434.

Most Raychem Circuit Protection devices

(TC, TGC, TRx, TSx) are certified at 60V

but can withstand higher Vmax. TR600 and

TS600 product families are certified at

250V but can withstand higher Vmax.

Interrupt conditions as noted above.

Rmax. Initial = Maximum device resistance

under specified conditions as supplied.

I

= Minimum current at which a device will trip

T

under specified conditions.

For the purposes of this brochure we have

included in the table of electrical ratings

WARNING!

the more applicable V

Interrupt value.

max.

• Operation beyond maximum ratings or improper

use may result in device damage and possible

electrical arcing and flame.

• These devices are intended for protection

against occasional overcurrent or overtemper-

ature fault conditions, and should not be used

when repeated fault conditions are anticipated.

• TR and TS devices are not intended for contin-

uous utility line voltage such as 120/220V or

240V.

• LVR Product Notes:

Standard PolySwitch product families

include, RGEF, RHEF, RTEF, RUEF, RXEF,

LVR, SMDF, nanoSMDF, microSMDF,

miniSMDF, BBRF, LR4F, LTPF, SRPF,

VTPF, VLRF, VLPF, AHRF, AGRF, and

AHS. PolySwitch TS, TR and ASMD

product families offer a selected number of

RoHS compliant parts. In addition, special

devices, such as speaker devices (SPK),

terminal devices (TD) and custom chip

devices, can be manufactured to meet

performance requirements that could be

outside of the performance band of the

standard products listed in this short form

catalog. Please contact a Raychem Circuit

Protection Customer Service representative

to discuss your special product needs.

1. A PTC device is not a fuse—it is a nonlinear

thermistor that limits current. Because under a

fault condition all PTC devices go into a high

resistance state but not open circuit, hazardous

voltage may be present at PTC locations.

2. The devices are intended for protection

against occasional overcurrent or

overtemperature fault conditions and should not

be used when repeated fault conditions or

prolonged trip events are anticipated.

3. Please refer to the SCD for complete

information and applications limitations, which

can be obtained from product management

(650-361-6900) or the web:

www.circuitprotection.com/lvr/

14

Worldwide Headquarters

308 Constitution Drive, MS R21/2A

Menlo Park, CA USA 94025-1164

Tel (800) 227-7040

(650) 361-6900

Fax (650) 361-2508

www.circuitprotection.com

www.circuitprotection.com.hk (Chinese)

www.raychem.co.jp/polyswitch (Japanese)

South America

Europe

Asia/Pacific

Argentina

UK/EIRE/

China, Beijing

Japan

Tel 54-11-4394-5150

Fax 54-11-4326-9985

Nordic Countries

Tel (32) 16-352028

Fax (32) 16-351319

Tel 86-10-6581-5606

Fax 86-10-6581-5608

Tel 81-44-900-5110

Fax 81-44-900-5140

Brazil

Tel 55-11-5181-4788

Fax 55-11-5181-4790

China, Guangzhou

Tel 86-20-8330-9933

Fax 86-20-8385-6139

Korea

Tel 82-2-3415-4654

Fax 82-2-3486-1786

Germany/Austria/

Switzerland/

Eastern Europe

Tel (49) 89-6089386

Fax (49) 89-6089394

Chile

Tel 56-2-209-8211

Fax 56-2-223-1477

China, Hong Kong

Tel 852-2738-3401

Fax 852-2735-1185

Malaysia

Tel 6-04-611-2119

Fax 6-04-644-9521

France/Benelux/

Italy/Iberia

Tel (33) 1-34202114

Fax (33) 1-34202324

Colombia

Tel 57-1-218-2460

Fax 57-1-218-2472

China, Shanghai

Tel 86-21-6485-3288

Fax 86-21-6485-5109

Australia/Philippines

Tel 63-2-848-0171

Fax 63-2-867-8661

Peru

Tel 51-1-221-4165

Fax 51-1-421-0368

China, Shenzhen

Tel 86755-25154797

Fax 86755-25980419

Other Countries

Tel (32) 16-351321

Fax (32) 16-351319

Singapore

Tel 65-6416-4205

Fax 65-6484-0661

Uruguay

Tel 59-8-982-2428

Fax 59-8-982-2430

India, Bangalore

Tel 91-80-51121776

Fax 91-80-25586039

Taiwan

Tel 886-2-2662-9788

Fax 886-2-2662-4684

Venezuela

Tel 58-2-242-6475

Fax 58-2-241-8260

Thailand

Tel 66-1-875-5758

Fax 66-2-617-1939

PolySwitch, SiBar, miniSMD, microSMD, and nanoSMD are trademarks of Tyco Electronics Corporation.

All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco

Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics’ only

obligations are those in the Company’s Standard Terms and Conditions of Sale for this product, and in no case will Tyco Electronics be liable for any incidental, indirect,

or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, Tyco Electronics

reserves the right to make changes—without notification to Buyer—to materials or processing that do not affect compliance with any applicable specification.


型号：	VTP110F
厂家：	TE CONNECTIVITY
描述：	PolySwitch™ Resettable Device Short Form Catalog 的PolySwitch ？重置设备简表目录
文件：	总18页 (文件大小：566K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

VTP110F [TE]

相关型号：

VTP1112

VTP1188S

VTP1220FB

VTP1232

VTP1332

VTP140SLUF

VTP145SUF

VTP170F

VTP170SSF

VTP170X

VTP170XF

VTP170XSDDF