74AHCT1G14DBVT [TI]
AHCT/VHCT/VT SERIES, 1-INPUT INVERT GATE, PDSO5;型号: | 74AHCT1G14DBVT |
厂家: | TEXAS INSTRUMENTS |
描述: | AHCT/VHCT/VT SERIES, 1-INPUT INVERT GATE, PDSO5 输入元件 光电二极管 |
文件: | 总14页 (文件大小:838K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74AHCT1G14
www.ti.com
SCLS322P –MARCH 1996–REVISED JUNE 2013
SINGLE SCHMITT-TRIGGER INVERTER GATE
Check for Samples: SN74AHCT1G14
1
FEATURES
•
•
•
•
•
•
Operating Range 4.5-V to 5.5-V
DBV OR DCK PACKAGE
(TOP VIEW)
Max tpd of 8 ns at 5-V
Low Power Consumption, 10-μA Max ICC
±8-mA Output Drive at 5-V
1
5
NC
A
V
Y
CC
2
3
Inputs Are TTL-Voltage Compatible
4
GND
Latch-Up Performance Exceeds 250 mA Per
JESD 17
NC – No internal connection
See mechanical drawings for dimensions.
DESCRIPTION
description/ordering information The SN74AHCT1G14 contains a single inverter gate. The device performs the
Boolean function Y = A.
The device functions as an independent inverter gate, but because of the Schmitt action, gates may have
different input threshold levels for positive- (VT+) and negative-going (VT–) signals.
FUNCTION TABLE
INPUTS
OUTPUT
A
H
L
Y
L
H
LOGIC DIAGRAM (POSITIVE LOGIC)
2
4
A
Y
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1996–2013, Texas Instruments Incorporated
SN74AHCT1G14
SCLS322P –MARCH 1996–REVISED JUNE 2013
www.ti.com
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)(1)
VALUE
–0.5 to 7
–0.5 to 7
–0.5 to VCC + 0.5
–20
UNIT
V
Supply voltage range, VCC
Input voltage range, VI(2)
V
(2)
Output voltage range, VO
V
Input clamp current, IIK (VI < 0)
mA
mA
mA
mA
Output clamp current, IOK (VO < 0 or VO > VCC
)
±20
Continuous output current, IO (VO = 0 to VCC
)
±25
Continuous current through VCC or GND
±50
DBV package
DCK package
206
(3)
Package thermal impedance, θJA
°C/W
°C
252
Storage temperature range, Tstg
–65 to 150
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS(1)
MIN
4.5
0
MAX
5.5
5.5
VCC
–8
UNIT
V
VCC
VI
Supply voltage
Input voltage
V
VO
IOH
IOL
TA
Output voltage
0
V
High-level output current
Low-level output current
Operating free-air temperature
mA
mA
°C
8
–40
125
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2
Submit Documentation Feedback
Copyright © 1996–2013, Texas Instruments Incorporated
Product Folder Links :SN74AHCT1G14
SN74AHCT1G14
www.ti.com
SCLS322P –MARCH 1996–REVISED JUNE 2013
ELECTRICAL CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
Recommended
TA = 25°C
TYP
TA = –40°C to 85°C
TA = –40°C to
125°C
PARAMETER
TEST CONDITIONS
VCC
UNIT
MIN
MAX
MIN
MAX
MIN
MAX
VT+
4.5 V
5.5 V
4.5 V
5.5 V
0.9
2
0.9
0.9
2.0
2.0
1.6
1.5
Positive-going
input threshold
voltage
V
V
1.1
0.5
0.6
2
1.6
1.5
1.1
0.5
0.6
1.1
0.5
0.6
VT–
Negative-going
input threshold
votlage
ΔVT
4.5 V
5.5 V
0.4
0.5
1.4
1.6
0.4
0.4
0.4
0.5
1.4
1.6
Hysteresis (VT+
VT–
–
V
V
)
IOH = –50 mA
IOH = –8 mA
IOL = 50 mA
IOL = 8 mA
4.4
4.5
4.4
4.4
3.7
VOH
4.5 V
4.5 V
3.94
3.88
0.1
0.1
0.1
VOL
II
V
0.36
0.44
0.55
0 V to 5.5
V
VI = 5.5 V or GND
±0.1
±1
±1
µA
VI = VCC or
IO = 0
ICC
Ci
5.5 V
5 V
1
10
10
10
10
µA
pF
GND,
VI = VCC or GND
2
10
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
Recommended
TA = –40°C to
TA = 25°C
FROM
(INPUT)
TO
(OUTPUT)
OUTPUT
CAPACITANCE
TA = –40°C to
125°C
85°C
PARAMETER
UNIT
TYP
4
MAX
MIN
MAX
MIN
MAX
tPLH
tPHL
tPLH
tPHL
7
7
8
8
1
1
1
1
8
8
9
9
1
1
1
1
9
9
A
A
Y
Y
CL = 15 pF
CL = 50 pF
ns
ns
4
5.5
5.5
10
10
OPERATING CHARACTERISTICS
VCC = 5 V, TA = 25°C
PARAMETER
TEST CONDITIONS
No load, f = 1 MHz
TYP
UNIT
pF
Cpd
Power dissipation capacitance
12
Copyright © 1996–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links :SN74AHCT1G14
SN74AHCT1G14
SCLS322P –MARCH 1996–REVISED JUNE 2013
www.ti.com
PARAMETER MEASUREMENT INFORMATION
V
CC
Open
S1
R
= 1 kΩ
L
TEST
S1
From Output
Under Test
Test
From Output
Under Test
GND
Point
t
t
/t
PLH PHL
Open
C
C
L
(see Note A)
t
/t
PLZ PZL
V
CC
GND
L
(see Note A)
/t
PHZ PZH
Open Drain
V
CC
LOAD CIRCUIT FOR
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
3-STATE AND OPEN-DRAIN OUTPUTS
3 V
0 V
1.5 V
Timing Input
t
w
t
h
3 V
t
su
3 V
0 V
1.5 V
1.5 V
Input
1.5 V
1.5 V
Data Input
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3 V
0 V
3 V
0 V
Output
Control
1.5 V
1.5 V
1.5 V
1.5 V
Input
t
t
PLZ
t
t
t
PZL
PLH
PHL
Output
V
≈V
OH
CC
Waveform 1
In-Phase
Output
50% V
50% V
50% V
CC
50% V
CC
CC
V
S1 at V
CC
(see Note B)
V
V
+ 0.3 V
OL
V
OL
OL
t
t
PZH
t
PHL
PLH
PHZ
Output
Waveform 2
S1 at GND
V
OH
V
OH
Out-of-Phase
Output
− 0.3 V
OH
50% V
CC
50% V
CC
CC
V
≈0 V
(see Note B)
OL
VOLTAGE WAVEFORMS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output
control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output
control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf
≤ 3 ns.
D. The outputs are measured one at a time with one input transition per measurement.
E. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
4
Submit Documentation Feedback
Copyright © 1996–2013, Texas Instruments Incorporated
Product Folder Links :SN74AHCT1G14
SN74AHCT1G14
www.ti.com
SCLS322P –MARCH 1996–REVISED JUNE 2013
REVISION HISTORY
Changes from Revision O (January 2003) to Revision P
Page
•
•
Changed document format from Quicksilver to DocZone. .................................................................................................... 1
Extended operating temperature range to 125°C ................................................................................................................. 2
Copyright © 1996–2013, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links :SN74AHCT1G14
PACKAGE OPTION ADDENDUM
www.ti.com
18-Sep-2015
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
74AHCT1G14DBVRE4
ACTIVE
SOT-23
SOT-23
DBV
5
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
(B143 ~ B14G ~
B14J ~ B14L ~
B14S)
74AHCT1G14DBVRG4
ACTIVE
DBV
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
(B143 ~ B14G ~
B14J ~ B14L ~
B14S)
74AHCT1G14DBVTE4
74AHCT1G14DBVTG4
74AHCT1G14DCKTE4
74AHCT1G14DCKTG4
SN74AHCT1G14DBVR
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOT-23
SOT-23
SC70
DBV
DBV
DCK
DCK
DBV
5
5
5
5
5
250
250
250
250
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
(B143 ~ B14G ~
B14L ~ B14S)
Green (RoHS
& no Sb/Br)
(B143 ~ B14G ~
B14L ~ B14S)
Green (RoHS
& no Sb/Br)
(BF3 ~ BFG ~ BFL ~
BFS)
SC70
Green (RoHS
& no Sb/Br)
(BF3 ~ BFG ~ BFL ~
BFS)
SOT-23
Green (RoHS
& no Sb/Br)
(B143 ~ B14G ~
B14J ~ B14L ~
B14S)
SN74AHCT1G14DBVT
SN74AHCT1G14DCKR
SN74AHCT1G14DCKRG4
SN74AHCT1G14DCKT
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOT-23
SC70
SC70
SC70
DBV
DCK
DCK
DCK
5
5
5
5
250
3000
3000
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-40 to 125
-40 to 125
-40 to 125
-40 to 125
(B143 ~ B14G ~
B14L ~ B14S)
Green (RoHS
& no Sb/Br)
(BF3 ~ BFG ~ BFJ ~
BFL ~ BFS)
Green (RoHS
& no Sb/Br)
(BF3 ~ BFG ~ BFJ ~
BFL ~ BFS)
Green (RoHS
& no Sb/Br)
(BF3 ~ BFG ~ BFL ~
BFS)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
18-Sep-2015
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
28-Oct-2015
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74AHCT1G14DBVR SOT-23
SN74AHCT1G14DBVR SOT-23
SN74AHCT1G14DBVR SOT-23
SN74AHCT1G14DBVT SOT-23
DBV
DBV
DBV
DBV
DCK
DCK
DCK
DCK
DCK
5
5
5
5
5
5
5
5
5
3000
3000
3000
250
180.0
180.0
178.0
178.0
180.0
178.0
178.0
178.0
180.0
9.2
8.4
9.0
9.0
9.2
9.2
9.2
9.0
9.2
3.17
3.23
3.23
3.3
3.23
3.17
3.17
3.2
1.37
1.37
1.37
1.4
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
SN74AHCT1G14DCKR
SN74AHCT1G14DCKR
SN74AHCT1G14DCKT
SN74AHCT1G14DCKT
SN74AHCT1G14DCKT
SC70
SC70
SC70
SC70
SC70
3000
3000
250
2.3
2.55
2.4
1.2
2.4
1.22
1.22
1.2
2.4
2.4
250
2.4
2.5
250
2.3
2.55
1.2
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
28-Oct-2015
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74AHCT1G14DBVR
SN74AHCT1G14DBVR
SN74AHCT1G14DBVR
SN74AHCT1G14DBVT
SN74AHCT1G14DCKR
SN74AHCT1G14DCKR
SN74AHCT1G14DCKT
SN74AHCT1G14DCKT
SN74AHCT1G14DCKT
SOT-23
SOT-23
SOT-23
SOT-23
SC70
DBV
DBV
DBV
DBV
DCK
DCK
DCK
DCK
DCK
5
5
5
5
5
5
5
5
5
3000
3000
3000
250
205.0
202.0
180.0
180.0
205.0
180.0
180.0
180.0
205.0
200.0
201.0
180.0
180.0
200.0
180.0
180.0
180.0
200.0
33.0
28.0
18.0
18.0
33.0
18.0
18.0
18.0
33.0
3000
3000
250
SC70
SC70
SC70
250
SC70
250
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明