ADS5481IRGC25 [TI]
16-bit 80MSPS ADC With Buffered Analog Input 64-VQFN -40 to 85;![ADS5481IRGC25](http://pdffile.icpdf.com/pdf2/p00240/img/icpdf/ADS5481IRGC2_1449562_icpdf.jpg)
型号: | ADS5481IRGC25 |
厂家: | ![]() |
描述: | 16-bit 80MSPS ADC With Buffered Analog Input 64-VQFN -40 to 85 转换器 |
文件: | 总47页 (文件大小:2795K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
16-Bit, 80/105/135-MSPS Analog-to-Digital Converters
Check for Samples: ADS5481 ADS5482 ADS5483
1
FEATURES
APPLICATIONS
•
Wireless Infrastructure (Multi-Carrier GSM,
WCDMA, LTE)
23
•
80/105/135-MSPS Sample Rates
•
•
•
•
•
•
•
•
•
16-Bit Resolution
•
•
•
•
•
•
•
Test and Measurement Instrumentation
Software-Defined Radio
Data Acquisition
Power Amplifier Linearization
Communication Instrumentation
Radar
SFDR: 95 dBc at 70 MHz and 135 MSPS
SNR: 78.6 dBFS at 70 MHz and 135 MSPS
Efficient DDR LVDS-Compatible Outputs
Internal Dither Available
Total Power Dissipation: 2.2 W
Power-Down Mode: 70 mW
Medical Imaging
On-Chip High Impedance Analog Buffer
QFN-64 PowerPAD™ Package
(9 mm × 9 mm Footprint)
•
Industrial Temperature Range:
–40°C to +85°C
DESCRIPTION
The ADS5481/ADS5482/ADS5483 (ADS548x) is a 16-bit family of analog-to-digital converters (ADCs) that
operate from both a 5-V supply and 3.3-V supply while providing LVDS-compatible digital outputs. The ADS548x
integrated analog input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing
the signal source while providing a high-impedance input. An internal reference generator is also provided to
simplify the system design.
Designed for highest total ENOB, the ADS548x family has outstanding low noise performance and spurious-free
dynamic range.
The ADS548x is available in an QFN-64 PowerPAD package. The device is built on Texas Instruments
complementary bipolar process (BiCom3) and is specified over the full industrial temperature range (–40°C to
+85°C).
SFDR
vs
SNR
vs
INPUT FREQUENCY
INPUT FREQUENCY
100
95
90
85
80
82
81
80
79
78
77
76
75
ADS5481
ADS5482
ADS5482
ADS5481
ADS5483
ADS5483
0
20
40
60
80
100
120
140
0
20
40
60
80
100
120
140
f − Input Frequency − MHz
I
f − Input Frequency − MHz
I
G068
G069
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2009, Texas Instruments Incorporated
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Table 1. PACKAGE/ORDERING INFORMATION(1)
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESIGNATOR
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
PRODUCT
PACKAGE-LEAD
ADS5481IRGCT
ADS5481IRGCR
ADS5482IRGCT
ADS5482IRGCR
ADS5483IRGCT
ADS5483IRGCR
Tape and Reel, 250
Tape and Reel, 2000
Tape and Reel, 250
Tape and Reel, 2000
Tape and Reel, 250
Tape and Reel, 2000
ADS5481
ADS5482
ADS5483
QFN-64
QFN-64
QFN-64
RGC
RGC
RGC
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
AZ5481
AZ5482
AZ5483
(1) For the most current product and ordering information see the Package Option Addendum located at the end of this document, or see
the TI website at www.ti.com..
2
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
ABSOLUTE MAXIMUM RATINGS(1)
Over operating free-air temperature range, unless otherwise noted.
ADS5481, ADS5482, ADS5483
UNIT
AVDD5 to GND
AVDD3 to GND
DVDD3 to GND
6
5
5
V
V
V
Supply voltage
AC signal. Valid when AVDD5 is within normal operating range. When
AVDD5 is off, analog inputs should be <0.5V. If not, the protection
Analog input to GND diode between the inputs and AVDD5 will become forward-biased and
could be damaged or shorten device lifetime (see Figure 60). Short
transient conditions during power on/off are not a concern.
–0.3 to (AVDD5 + 0.3)
±4
V
V
V
Analog INP to INM
Clock input to GND
CLKP to CLKM
DC signal
Valid when AVDD3 is within normal operating range. When AVDD3 is
off, clock inputs should be <0.5V. If not, the protection diode between
the inputs and AVDD3 will become forward-biased and could be
damaged or shorten device lifetime (see Figure 67). Short transient
conditions during power on/off are not a concern.
–0.3 to (AVDD3 + 0.3)
±2.5
V
V
Digital data output to GND
–0.3 to (DVDD3 + 0.3)
Digital data output plus-to-minus
Operating temperature range
Maximum junction temperature
Storage temperature range
ESD, human-body model (HBM)
±1
–40 to +85
+150
V
°C
°C
°C
kV
–65 to +150
2
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied. Kirkendall voidings and current density information for calculation of expected lifetime are available upon
request.
THERMAL CHARACTERISTICS(1)
PARAMETER
TEST CONDITIONS
TYP
UNIT
Soldered thermal pad, no airflow
20
16
7
RθJA
Soldered thermal pad, 150-LFM airflow
°C/W
RθJC
RθJP
thermal resistance from the junction to the package case (top)
thermal resistance from the junction to the thermal pad (bottom)
0.2
(1) Using 49 thermal vias ( 7 × 7 array). See PowerPAD Package in the Application Information section.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
RECOMMENDED OPERATING CONDITIONS
ADS5481, ADS5482,
ADS5483
UNIT
MIN
TYP
MAX
SUPPLIES
AVDD5
Analog supply voltage
Analog supply voltage
Output driver supply voltage
4.75
3.1
3
5
3.3
3.3
5.25
3.6
V
V
V
AVDD3
DVDD3
3.6
ANALOG INPUT
Differential input range
Input common mode
DIGITAL OUTPUT (DRY, DATA)
Maximum differential output load (parasitic or intentional)
Differential output resistance
CLOCK INPUT (CLK)
3
VPP
V
VCM
3.1
5
pF
100
Ω
Max
CLK input sample rate (sine wave)
10
Rated MSPS
Clock
Clock amplitude, differential sine wave (see Figure 69)
Clock duty cycle (see Figure 74)
1.5
45
5
55
VPP
%
50
TA
Operating free-air temperature
–40
+85
°C
ELECTRICAL CHARACTERISTICS (ADS5481, ADS5482, ADS5483)
Typical values at TA = +25°C: minimum and maximum values over full temperature range TMIN = –40°C to TMAX = +85°C,
sampling rate = max rated, 50% clock duty cycle, AVDD5 = 5 V, AVDD3 = 3.3 V, DVDD3 = 3.3 V, –1 dBFS differential input,
and 3-VPP differential clock, unless otherwise noted.
ADS5481
ADS5482
TYP MAX
ADS5483
TYP MAX
PARAMETER
TEST CONDITIONS
UNIT
MIN
TYP MAX
MIN
MIN
Clock rate
Resolution
80
16
105
16
135
16
MSPS
Bits
ANALOG INPUTS
Differential input range
3
3.1
3
3.1
3
3.1
VPP
V
Analog input common-mode
voltage
Self-biased; see VCM
specification below
Input resistance (dc)
Input capacitance
Each input to VCM
1000
3.5
1000
3.5
1000
3.5
Ω
Each input to GND
(including package)
pF
Analog input bandwidth
(–3dB)
125
65
125
65
485
65
MHz
dB
Common-mode signal
70 MHz (see Figure 56)
CMRR
Common-mode rejection ratio
INTERNAL REFERENCE VOLTAGE
VREF
VCM
Reference voltage
1.2
3.15
-1
1.2
3.15
-1
1.2
3.15
-1
V
V
Analog input common-mode
voltage reference output
With internal voltage
reference
3
3.35
3
3.35
3
3.35
VCM temperature coefficient
mV/°C
4
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
ELECTRICAL CHARACTERISTICS (ADS5481, ADS5482, ADS5483) (continued)
Typical values at TA = +25°C: minimum and maximum values over full temperature range TMIN = –40°C to TMAX = +85°C,
sampling rate = max rated, 50% clock duty cycle, AVDD5 = 5 V, AVDD3 = 3.3 V, DVDD3 = 3.3 V, –1 dBFS differential input,
and 3-VPP differential clock, unless otherwise noted.
ADS5481
MIN TYP MAX
ADS5482
TYP MAX
ADS5483
TYP MAX
PARAMETER
DYNAMIC ACCURACY
TEST CONDITIONS
UNIT
MIN
MIN
No missing codes,
fIN = 30 MHz
DNL
INL
Differential linearity error
-0.99
±0.5
±3
1.0 -0.99
±0.5
±3
1.0 -0.99
±0.5
±3
1.0
LSB
Integral linearity error
Offset error
fIN = 30 MHz
-10
-15
+10
15
-10
-15
+10
15
-10
-15
+10
15
LSB
mV
Offset temperature coefficient
Gain error
-0.02
±2
-0.02
±2
-0.02
±2
mV/°C
%FS
mV/°C
-6
6
-6
6
-6
6
Gain temperature coefficient
-0.01
-0.01
-0.01
POWER SUPPLY
IAVDD5
IAVDD3
IDVDD3
5-V analog
316
131
60
330
150
65
316
131
60
330
150
65
317
133
60
330
150
65
mA
mA
mA
W
VIN = full-scale,
fIN = 30 MHz,
fS = Max rated, Normal
operation
3.3-V analog
3.3-V digital/LVDS
Total power dissipation
5-V analog
2.15
98
2.35
2.15
98
2.35
2.2
98
2.35
IAVDD5
IAVDD3
IDVDD3
mA
mA
mA
mW
mA
mA
mA
mW
μS
3.3-V analog
35
35
35
Light sleep mode
(PDWNF=H, PDWNS=L)
3.3-V digital/LVDS
Total power dissipation
5-V analog
0.07
605
13
0.07
680
13
0.07
605
13
680
100
680
100
680
100
IAVDD5
IAVDD3
IDVDD3
3.3-V analog
2
2
2
Deep sleep mode
(PDWNF=L, PDWNS=H)
3.3-V digital/LVDS
Total power dissipation
0.07
70
0.07
70
0.07
70
Fast wakeup time (light sleep) From PDWNF disabled
600
600
600
Slow wakeup time (deep
sleep)
From PDWNS disabled
6
6
6
mS
AVDD5 supply
AVDD3 supply
Power-supply rejection ratio,
Without 0.1-μF board supply
capacitors, with 1-MHz
supply noise (see
60
80
60
80
60
80
dB
dB
PSRR
DVDD3 supply
95
95
95
dB
Figure 76)
DYNAMIC AC CHARACTERISTICS
fIN = 10 MHz
fIN = 30 MHz
fIN = 70 MHz
fIN = 100 MHz
fIN = 130 MHz
fIN = 10 MHz
fIN = 30 MHz
81
80.6
80.1
79.6
80.8
80.7
80.1
80
79
79
78.4
78.4
76
86
86
SNR
SFDR
HD2
Signal-to-noise ratio
78.6
78.2
77.8
97
dBFS
98
97
93
92
98
98
91
90
87
87
97
Spurious-free dynamic range fIN = 70 MHz
fIN = 100 MHz
95
dBc
dBc
88
fIN = 130 MHz
85
fIN = 10 MHz
108
101
100
99
107
105
101
100
102
99
fIN = 30 MHz
87
87
Second-harmonic
fIN = 70 MHz
fIN = 100 MHz
fIN = 130 MHz
95
92
85
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
ELECTRICAL CHARACTERISTICS (ADS5481, ADS5482, ADS5483) (continued)
Typical values at TA = +25°C: minimum and maximum values over full temperature range TMIN = –40°C to TMAX = +85°C,
sampling rate = max rated, 50% clock duty cycle, AVDD5 = 5 V, AVDD3 = 3.3 V, DVDD3 = 3.3 V, –1 dBFS differential input,
and 3-VPP differential clock, unless otherwise noted.
ADS5481
MIN TYP MAX
ADS5482
TYP MAX
ADS5483
TYP MAX
PARAMETER
TEST CONDITIONS
UNIT
MIN
MIN
fIN = 10 MHz
103
100
93
96
98
91
90
110
100
96
fIN = 30 MHz
fIN = 70 MHz
fIN = 100 MHz
fIN = 130 MHz
fIN = 10 MHz
fIN = 30 MHz
fIN = 70 MHz
fIN = 100 MHz
fIN = 130 MHz
fIN = 10 MHz
fIN = 30 MHz
fIN = 70 MHz
fIN = 100 MHz
fIN = 130 MHz
fIN = 10 MHz
fIN = 30 MHz
87
87
86
HD3
Third-harmonic
dBc
92
88
88
98
97
96
96
98
98
97
94
97
87
87
84
86
83
74
97
Worst harmonic/spur
(other than HD2 and HD3)
98
dBc
dBc
97
96
96
94
93
88
95
95
88
92
97
84
94
THD
Total harmonic distortion
91
86
83
80
79.5
78.9
77.8
79.5
79.3
78.2
78
77.9
77.8
77.4
76.6
76
76.7
76.7
SINAD
Signal-to-noise and distortion fIN = 70 MHz
fIN = 100 MHz
dBc
fIN = 130 MHz
fIN1 = 29.5 MHz, fIN2 = 30.5
MHz, each at –7 dBFS,
worst spur
103
101
100
IMD
Two-tone SFDR
dBFS
fIN1 = 102 MHz, fIN2 = 103
MHz, each at –7 dBFS,
worst spur
90
fIN = 10 MHz (from SINAD
in dBc)
13
12.9
1.8
12.9
12.64
ENOB
Effective number of bits
RMS idle-channel noise
Bits
fIN = 30 MHz (from SINAD
in dBc)
12.4
12.4 12.88
1.8
12 12.63
2.2
Analog inputs shorted
together
LSBrms
LVDS DIGITAL OUTPUTS
Assumes a 100Ω differential
VOD
Differential output voltage (±) load on each LVDS pair and
LVDS bias = 3.5 mA
247
350
454
247
350
454
247
350
454
mV
V
Common-mode output
voltage
VOC
1.125
1.375 1.125
1.375 1.125
1.375
DIGITAL INPUTS
VIH
VIL
IIH
High level input voltage
2.0
-1
2.0
2.0
V
Low level input voltage
High level input current
Low level input current
Input capacitance
0.8
1
0.8
1
0.8
1
V
PDWNF, PDWNS, DITHER
μA
μA
pF
IIL
-1
-1
2
2
2
6
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TIMING INFORMATION
Sample
N
N+5
N+3
Aperture
Delay
ta
N+1
N+2
N+4
N+6
tCLKL
tCLKH
CLKP
Sampling
Clock Input
CLKM
tDRY
DRY_P
Data Clock
Output
DRY_M
Latency = 5 Clock Cycles
tDATA
Dx_y_P
Output Data
O
E
O
E
O
E
O
E
O
E
O
E
O
E
Dx_y_M
N – 1
N
E = Even Bits = B0, B2, B4, B6, B8, B10, B12, B14
O = Odd Bits = B1, B3, B5, B7, B9, B11, B13, B15
Dx_y_P/M are LVDS outputs that have two bits per pair (EVEN and ODD). The values for x and y are 0_1, 2_3, 4_5, ... 14_15.
T0158-02
Figure 1. Timing Diagram
TIMING CHARACTERISTICS(1)
Typical values at TA = +25°C: minimum and maximum values over full temperature range TMIN = –40°C to TMAX = +85°C,
sampling rate = max rated, 50% clock duty cycle, AVDD5 = 5 V, AVDD3 = 3.3 V, DVDD3 = 3.3 V, and 3-VPP differential clock,
unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
200
80
MAX
UNIT
ta
Aperture delay
ps
Aperture jitter, rms
Latency
Internal jitter of the ADC
fs
5
cycles
ns
tCLK
Clock period
1e9/CLK
0.5e9/CLK
0.5e9/CLK
1500
100
50
tCLKH
tCLKL
tDRY
Clock pulse duration, high
Clock pulse duration, low
CLK to DRY delay(2)
CLK to DATA delay(2)
DATA to DRY skew
DRY/DATA rise time
DRY/DATA fall time
CLK = max rated clock for that part number
ns
50
ns
1900
1900
0
2300
2400
600
ps
Zero crossing, 5-pF parasitic to GND
tDATA – tDRY, 5-pF parasitic to GND
5-pF parasitic to GND
tDATA
tSKEW
tRISE
tFALL
1400
ps
–600
ps
500
500
ps
ps
(1) Timing parameters are assured by design or characterization, but not production tested.
(2) DRY and DATA are updated on the rising edge of CLK input. The latency must be added to tDATA to determine the overall propagation
delay.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
PIN CONFIGURATION
ADS548x
RGC Package
(Top View)
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
AVDD5
AVDD5
AGND
REF
1
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
D4_5_P
D4_5_M
D2_3_P
D2_3_M
D0_1_P
D0_1_M
DVDD3
DGND
NC
2
3
4
5
NC
6
NC
7
AGND
AVDD5
AVDD3
AGND
INP
8
AGND
9
10
11
12
13
14
15
16
NC
NC
INM
NC
AGND
AVDD5
AVDD3
VCM
DITHER
PDWNS
PDWNF
LVDSB
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
P0056-08
8
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
Table 2. TERMINAL FUNCTIONS
TERMINAL
DESCRIPTION
NAME
NO.
1, 2, 8, 14, 18,
24, 27, 30
AVDD5
5V analog supply
9, 15, 19, 25,
28, 31
AVDD3
AGND
3.3V analog supply
3, 7, 10, 13, 17,
20, 23, 26, 29, Analog ground
32
DVDD3
DGND
42, 52, 63
41, 51, 64
5, 6, 37-40
11, 12
3.3V digital supply
Digital ground
NC
No connects - leave floating
INP, INM
CLKM, CLKP
Differential analog inputs (P = plus = true, M = minus = complement)
Differential clock inputs (P = plus = true, M = minus = complement)
21, 22
Reference voltage input/output (1.2V nominal). To use an external reference and to turn the internal
reference off, pull both PDWNF and PDWNS to logic high (DVDD3).
REF
4
Analog input common mode, output (3.1V), for use in applications that require use of the internally
generated common-mode. See the applications section for more information on using VCM.
VCM
16
33
34
External bias resistor for LVDS bias current, normally 10kΩ to GND to provide nominal 3.5mA LVDS
current
LVDSB
PDWNF
Light sleep power down, fast wakeup, logic high (DVDD3) = light sleep enabled (bandgap reference
remains on)
Deep sleep power down, slow wakeup, logic high (DVDD3) = deep sleep enabled (bandgap reference is
off)
PDWNS
DITHER
35
36
Dither enable, logic high (DVDD3) = dither enabled
DRY_P,
DRY_M
54, 53
Dataready signal (LVDS clockout) (P = plus = true, M = minus = complement)
D14_15_P,
D14_15_M
62, 61
DDR LVDS output bits 14 then 15 (15 is MSB) (P = plus = true, M = minus = complement)
DDR LVDS output bits E (even) then O (odd) (P = plus = true, M = minus = complement)
DE_O_P,
DE_O_M
43-50, 55-62
D0_1_P,
D0_1_M
44, 43
65
DDR LVDS output bits 0 then 1 (0 is LSB) (P = plus = true, M = minus = complement)
Analog ground (exposed pad on bottom of package)
PowerPAD
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5481 - 80 MSPS Typical Data
Plots in this section are with a clock of 80MSPS unless otherwise specified.
ADS5481 SPECTRAL PERFORMANCE
ADS5481 SPECTRAL PERFORMANCE
vs
vs
FFT for 10 MHz INPUT SIGNAL
FFT for 30 MHz INPUT SIGNAL
0
−10
0
−10
SFDR = 99 dBc
SFDR = 99 dBc
SINAD = 81 dBFS
SNR = 81.1 dBFS
THD = 96.5 dBc
SINAD = 80.8 dBFS
SNR = 80.9 dBFS
THD = 94.2 dBc
−20
−20
−30
−30
−40
−40
−50
−50
−60
−60
−70
−70
−80
−80
−90
−90
−100
−110
−120
−130
−100
−110
−120
−130
0
10
20
30
40
0
10
20
30
40
f − Frequency − MHz
f − Frequency − MHz
G001
G002
Figure 2.
Figure 3.
ADS5481 SPECTRAL PERFORMANCE
ADS5481 SPECTRAL PERFORMANCE
vs
vs
FFT for 60 MHz INPUT SIGNAL
FFT for 100 MHz INPUT SIGNAL
0
−10
0
−10
SFDR = 102 dBc
SINAD = 80.3 dBFS
SNR = 80.4 dBFS
THD = 97.7 dBc
SFDR = 94 dBc
SINAD = 79.6 dBFS
SNR = 79.8 dBFS
THD = 92.6 dBc
−20
−20
−30
−30
−40
−40
−50
−50
−60
−60
−70
−70
−80
−80
−90
−90
−100
−110
−120
−130
−100
−110
−120
−130
0
10
20
30
40
0
10
20
30
40
f − Frequency − MHz
f − Frequency − MHz
G003
G004
Figure 4.
Figure 5.
10
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5481 AC PERFORMANCE
ADS5481 SFDR
vs
vs
INPUT AMPLITUDE (70 MHz Input Signal)
INPUT AMPLITUDE (70 MHz Input Signal)
130
120
110
100
90
100
95
90
85
80
75
70
65
60
SFDR (dBFS,
Dither ON)
SFDR (dBc,
Dither OFF)
SFDR (dBc,
Dither OFF)
SFDR (dBFS,
Dither OFF)
80
70
SNR (dBFS,
Dither ON)
60
50
SNR (dBc,
Dither ON)
40
30
f
f
= 80 MSPS
f
f
= 80 MSPS
= 70 MHz
S
S
= 70 MHz
20
IN
IN
SFDR (dBc,
Dither ON)
SFDR (dBc,
Dither ON)
A
= 0 to −100 dBFS
IN
256k Point FFT
A
= 0 to −40 dBFS
IN
256k Point FFT
10
0
−100 −90 −80 −70 −60 −50 −40 −30 −20 −10
0
−40 −36 −32 −28 −24 −20 −16 −12 −8 −4
0
Input Amplitude − dBFS
Input Amplitude − dBFS
G009
G010
Figure 6.
Figure 7.
ADS5481 TWO-TONE INTERMODULATION DISTORTION
(FFT for 29.5 MHz and 30.5 MHz at –7 dBFS)
ADS5481 TWO-TONE INTERMODULATION DISTORTION
(FFT for 69.5 MHz and 70.5 MHz at –7 dBFS)
0
0
f
f
1 = 29.5 MHz, –7 dBFS
2 = 30.5 MHz, –7 dBFS
f
f
1 = 69.5 MHz, –7 dBFS
2 = 70.5 MHz, –7 dBFS
IN
IN
−10
−20
−10
−20
IN
IN
IMD3 = 101 dBFS
IMD3 = 95 dBFS
−30
−30
SFDR = 101 dBFS
SFDR = 95 dBFS
SNR = 80.9 dBFS
Dither Enabled, CLK = 80 MSPS
SNR = 80.5 dBFS
Dither Enabled, CLK = 80 MSPS
−40
−40
−50
−50
−60
−60
−70
−70
−80
−80
−90
−90
−100
−110
−120
−130
−100
−110
−120
−130
0
10
20
30
40
0
10
20
30
40
f − Frequency − MHz
f − Frequency − MHz
G011
G012
Figure 8.
Figure 9.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5481 TWO-TONE PERFORMANCE
vs
INPUT AMPLITUDE (f1 = 29.5 MHz and f2 = 30.5 MHz)
ADS5481 DIFFERENTIAL NONLINEARITY
−90
1.0
0.8
f
f
= 80 MSPS
= 10 MHz, –1 dBFS
S
No Dither, Dominant Spur (dBFS)
IN
−100
−110
−120
−130
−140
0.6
Dither, Dominant Spur (dBFS)
Dither, 2F2−F1 (dBFS)
0.4
0.2
0.0
−0.2
−0.4
−0.6
−0.8
−1.0
Dither, 2F1−F2 (dBFS)
−90 −80 −70 −60 −50 −40 −30 −20 −10
0
0
16384
32768
Code
49152
65536
Input Amplitude − dBFS
G013
G014
Figure 10.
Figure 11.
ADS5481 SFDR
vs
ADS5481 INTEGRAL NONLINEARITY
AVDD5 OVER TEMPERATURE
4
3
100
95
90
85
80
f
f
= 80 MSPS
= 10 MHz, –1 dBFS
S
T
= 100°C
T
= 85°C
A
A
IN
2
1
0
T
= −20°C
T
A
= 55°C
A
T
= 25°C
A
T
A
= −40°C
−1
−2
−3
−4
T
A
= 10°C
T
= 0°C
A
f
f
= 80 MSPS
= 30 MHz
S
IN
0
16384
32768
Code
49152
65536
4.7
4.8
4.9
5.0
5.1
5.2
5.3
AVDD5 − Supply Voltage − V
G015
G016
Figure 12.
Figure 13.
12
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5481 SNR
vs
ADS5481 SFDR
vs
AVDD5 OVER TEMPERATURE
AVDD3 OVER TEMPERATURE
82
81
80
79
78
77
76
75
100
95
90
85
80
T
= −40°C
A
T
= 85°C
T
= 100°C
A
T
= 55°C
A
A
T
= 25°C
A
T
A
= −20°C
T
= 100°C
T
A
= 10°C
A
T
A
= −40°C
T
= 85°C
A
T
A
= 0°C
T
= 0°C
A
T
= 55°C
T
= −20°C
A
A
T
A
= 25°C
f
f
= 80 MSPS
= 30 MHz
f
f
= 80 MSPS
= 30 MHz
S
S
T
A
= 10°C
IN
IN
4.7
4.8
4.9
5.0
5.1
5.2
5.3
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
AVDD5 − Supply Voltage − V
AVDD3 − Supply Voltage − V
G017
G018
Figure 14.
Figure 15.
ADS5481 SNR
vs
ADS5481 SFDR
vs
AVDD3 OVER TEMPERATURE
DVDD3 OVER TEMPERATURE
82
81
80
79
78
77
76
75
100
95
90
85
80
T
= −40°C
A
T
= 85°C
A
T = 100°C
A
T
= 55°C
A
T
A
= −20°C
T
= 100°C
T = 25°C
A
A
T
A
= −40°C
T
= 85°C
T
A
= 10°C
A
T
A
= 0°C
T
= 0°C
A
T
= 55°C
A
T = −20°C
A
T
= 25°C
A
f
f
= 80 MSPS
= 30 MHz
f
f
= 80 MSPS
= 30 MHz
S
S
T
A
= 10°C
IN
IN
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
AVDD3 − Supply Voltage − V
DVDD3 − Supply Voltage − V
G019
G020
Figure 16.
Figure 17.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5481 SNR
vs
DVDD3 OVER TEMPERATURE
82
T
= 0°C
A
81
80
79
78
77
76
75
T
A
= −20°C
T
= 100°C
A
T
= 85°C
T
A
= −40°C
A
T
= 55°C
A
T
A
= 25°C
f
f
= 80 MSPS
= 30 MHz
S
T
A
= 10°C
IN
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
DVDD3 − Supply Voltage − V
G021
Figure 18.
14
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5482 - 105 MSPS Typical Data
Plots in this section are with a clock of 105MSPS unless otherwise specified.
ADS5482 SPECTRAL PERFORMANCE
ADS5482 SPECTRAL PERFORMANCE
vs
vs
FFT for 10 MHz INPUT SIGNAL
FFT for 30 MHz INPUT SIGNAL
0
−10
0
−10
SFDR = 101 dBc
SINAD = 80.8 dBFS
SNR = 80.8 dBFS
THD = 100.4 dBc
SFDR = 100 dBc
SINAD = 80.2 dBFS
SNR = 80.3 dBFS
THD = 96.6 dBc
−20
−20
−30
−30
−40
−40
−50
−50
−60
−60
−70
−70
−80
−80
−90
−90
−100
−110
−120
−130
−100
−110
−120
−130
0
10
20
30
40
50
0
10
20
30
40
50
f − Frequency − MHz
f − Frequency − MHz
G005
G006
Figure 19.
Figure 20.
ADS5482 SPECTRAL PERFORMANCE
ADS5482 SPECTRAL PERFORMANCE
vs
vs
FFT for 70 MHz INPUT SIGNAL
FFT for 90 MHz INPUT SIGNAL
0
−10
0
−10
SFDR = 97 dBc
SFDR = 90 dBc
SINAD = 79.4 dBFS
SNR = 79.5 dBFS
THD = 93.8 dBc
SINAD = 78.8 dBFS
SNR = 79.3 dBFS
THD = 88.1 dBc
−20
−20
−30
−30
−40
−40
−50
−50
−60
−60
−70
−70
−80
−80
−90
−90
−100
−110
−120
−130
−100
−110
−120
−130
0
10
20
30
40
50
0
10
20
30
40
50
f − Frequency − MHz
f − Frequency − MHz
G007
G008
Figure 21.
Figure 22.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
15
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5482 AC PERFORMANCE
ADS5482 SFDR
vs
vs
INPUT AMPLITUDE (70 MHz Input Signal)
INPUT AMPLITUDE (70 MHz Input Signal)
130
120
110
100
90
100
95
90
85
80
75
70
65
60
SFDR (dBFS,
Dither ON)
SFDR (dBc,
Dither ON)
SFDR (dBFS,
Dither OFF)
SFDR (dBc,
Dither OFF)
80
SFDR (dBc,
Dither OFF)
70
SNR (dBFS,
Dither ON)
60
SFDR (dBc,
Dither ON)
50
40
30
f
f
= 105 MSPS
= 70 MHz
f
f
= 105 MSPS
= 70 MHz
S
S
20
IN
IN
SNR (dBc,
Dither ON)
A
= 0 to −100 dBFS
IN
256k Point FFT
A
= 0 to −40 dBFS
IN
256k Point FFT
10
0
−100 −90 −80 −70 −60 −50 −40 −30 −20 −10
0
−40 −36 −32 −28 −24 −20 −16 −12 −8 −4
0
Input Amplitude − dBFS
Input Amplitude − dBFS
G022
G023
Figure 23.
Figure 24.
ADS5482 TWO-TONE INTERMODULATION DISTORTION
(FFT for 29.5 MHz and 30.5 MHz at –7 dBFS)
ADS5482 TWO-TONE INTERMODULATION DISTORTION
(FFT for 69.5 MHz and 70.5 MHz at –7 dBFS)
0
0
f
f
1 = 29.5 MHz, –7 dBFS
2 = 30.5 MHz, –7 dBFS
f
f
1 = 69.5 MHz, –7 dBFS
2 = 70.5 MHz, –7 dBFS
IN
IN
−10
−20
−10
−20
IN
IN
IMD3 = 101 dBFS
IMD3 = 102 dBFS
−30
−30
SFDR = 101 dBFS
SFDR = 100 dBFS
SNR = 80.6 dBFS
Dither Enabled, CLK = 105 MSPS
SNR = 80.1 dBFS
Dither Enabled, CLK = 105 MSPS
−40
−40
−50
−50
−60
−60
−70
−70
−80
−80
−90
−90
−100
−110
−120
−130
−100
−110
−120
−130
0
10
20
30
40
50
0
10
20
30
40
50
f − Frequency − MHz
f − Frequency − MHz
G024
G025
Figure 25.
Figure 26.
16
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5482 TWO-TONE PERFORMANCE
vs
INPUT AMPLITUDE (f1 = 69.5 MHz and f2 =70.5 MHz)
ADS5482 DIFFERENTIAL NONLINEARITY
−80
1.0
0.8
f
f
= 105 MSPS
= 10 MHz, –1 dBFS
S
Dither, 2F1−F2 (dBFS)
IN
No Dither, Dominant Spur (dBFS)
Dither, Dominant Spur (dBFS)
Dither, 2F2−F1 (dBFS)
−90
−100
−110
−120
−130
−140
0.6
0.4
0.2
0.0
−0.2
−0.4
−0.6
−0.8
−1.0
−90 −80 −70 −60 −50 −40 −30 −20 −10
0
0
16384
32768
Code
49152
65536
Input Amplitude − dBFS
G026
G027
Figure 27.
Figure 28.
ADS5482 SFDR
vs
ADS5482 INTEGRAL NONLINEARITY
AVDD5 OVER TEMPERATURE
4
3
100
95
90
85
80
f
f
= 105 MSPS
= 10 MHz, –1 dBFS
S
T
= 100°C
A
IN
2
T
A
= −40°C
1
T
= 55°C
A
T
= −20°C
A
T
A
= 85°C
0
T
A
= 0°C
T
A
= 25°C
−1
−2
−3
−4
T
= 10°C
A
f
f
= 105 MSPS
= 30 MHz
S
IN
0
16384
32768
Code
49152
65536
4.7
4.8
4.9
5.0
5.1
5.2
5.3
AVDD5 − Supply Voltage − V
G028
G029
Figure 29.
Figure 30.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
17
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5482 SNR
vs
ADS5482 SFDR
vs
AVDD5 OVER TEMPERATURE
AVDD3 OVER TEMPERATURE
82
81
80
79
78
77
76
75
100
95
90
85
80
T
= −20°C
A
T
= −40°C
A
T
A
= 100°C
T
= −20°C
A
T
= 85°C
A
T
A
= 0°C
T
A
= 55°C
T
A
= 55°C
T
= 0°C
A
T
A
= −40°C
T
A
= 100°C
T
A
= 25°C
T
A
= 85°C
T
A
= 25°C
T
= 10°C
A
T
= 10°C
f
f
= 105 MSPS
= 30 MHz
f
f
= 105 MSPS
= 30 MHz
A
S
S
IN
IN
4.7
4.8
4.9
5.0
5.1
5.2
5.3
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
AVDD5 − Supply Voltage − V
AVDD3 − Supply Voltage − V
G030
G031
Figure 31.
Figure 32.
ADS5482 SNR
vs
ADS5482 SFDR
vs
AVDD3 OVER TEMPERATURE
DVDD3 OVER TEMPERATURE
82
81
80
79
78
77
76
75
100
95
90
85
80
T
= −40°C
T
= −20°C
A
A
T
A
= 100°C
T
= 85°C
A
T
= −40°C
A
T
A
= 0°C
T
A
= 55°C
T
A
= −20°C
T
A
= 55°C
T
= 100°C
A
T
A
= 25°C
T
A
= 25°C
T
A
= 85°C
T
= 0°C
A
T
= 10°C
A
f
f
= 105 MSPS
= 30 MHz
f
S
= 105 MSPS
= 30 MHz
S
T
= 10°C
A
f
IN
IN
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
AVDD3 − Supply Voltage − V
DVDD3 − Supply Voltage − V
G032
G033
Figure 33.
Figure 34.
18
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5482 SNR
vs
DVDD3 OVER TEMPERATURE
82
T
= −20°C
T
= −40°C
A
A
81
80
79
78
77
76
75
T
A
= 85°C
T
= 0°C
A
T
= 55°C
T = 100°C
A
A
T
= 25°C
A
f
f
= 105 MSPS
S
T
= 10°C
= 30 MHz
A
IN
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
DVDD3 − Supply Voltage − V
G034
Figure 35.
ADS5482/5481 SNR
vs
INPUT FREQUENCY AND SAMPLING FREQUENCY
105
100
78
80
90
80
70
60
50
40
30
20
10
79
80
78
79
80
73
79
70
75
78
78
79
75
78
68
73
70
75
10
20
40
60
80
100
120
140
160
170
80
fIN - Input Frequency - MHz
72
64
66
68
70
74
76
78
SNR - dBFS
M0048-06
Figure 36.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
19
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5482/5481 SFDR
vs
INPUT FREQUENCY AND SAMPLING FREQUENCY
105
100
75
95
85
90
80
70
60
50
40
30
20
10
90
95
80
95
75
85
95
90
90
80
90
70
65
75
85
70
73
85
85
80
10
20
40
60
80
100
120
140
160
170
95
fIN - Input Frequency - MHz
60
65
70
75
80
85
90
SFDR - dBc
M0049-06
Figure 37.
20
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5483 - 135 MSPS Typical Data
Plots in this section are with a clock of 135MSPS unless otherwise specified.
ADS5483 SPECTRAL PERFORMANCE
FFT FOR 10 MHz INPUT SIGNAL
ADS5483 SPECTRAL PERFORMANCE
FFT FOR 30 MHz INPUT SIGNAL
0
−10
0
−10
SFDR = 97 dBc
SFDR = 97 dBc
SINAD = 78.9 dBFS
SNR = 78.9 dBFS
THD = 94.6 dBc
SINAD = 78.8 dBFS
SNR = 78.9 dBFS
THD = 94.6 dBc
−20
−20
−30
−30
−40
−40
−50
−50
−60
−60
−70
−70
−80
−80
−90
−90
−100
−110
−120
−130
−100
−110
−120
−130
0.0
13.5
27.0
40.5
54.0
67.5
0.0
13.5
27.0
40.5
54.0
67.5
f − Frequency − MHz
f − Frequency − MHz
G037
G038
Figure 38.
Figure 39.
ADS5483 SPECTRAL PERFORMANCE
FFT FOR 70 MHz INPUT SIGNAL
ADS5483 SPECTRAL PERFORMANCE
FFT FOR 100 MHz INPUT SIGNAL
0
−10
0
−10
SFDR = 95 dBc
SINAD = 78.3 dBFS
SNR = 78.5 dBFS
THD = 91 dBc
SFDR = 88 dBc
SINAD = 77.7 dBFS
SNR = 78.1 dBFS
THD = 86.6 dBc
−20
−20
−30
−30
−40
−40
−50
−50
−60
−60
−70
−70
−80
−80
−90
−90
−100
−110
−120
−130
−100
−110
−120
−130
0.0
13.5
27.0
40.5
54.0
67.5
0.0
13.5
27.0
40.5
54.0
67.5
f − Frequency − MHz
f − Frequency − MHz
G039
G040
Figure 40.
Figure 41.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
21
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
NORMALIZED GAIN RESPONSE
ADS5483 TWO-TONE INTERMODULATION DISTORTION
(FFT for 39.5 MHz and 40.5 MHz at –10 dBFS)
vs
INPUT FREQUENCY
3
0
0
f
f
1 = 39.5 MHz, –10 dBFS
2 = 40.5 MHz, –10 dBFS
IN
−10
−20
ADS5483
IN
IMD3 = 103 dBFS
SFDR = 100 dBFS
SNR = 79 dBFS
−3
−30
−40
−6
−50
ADS5481
−9
−60
−70
−12
−15
−18
−21
−24
−80
ADS5482
−90
−100
−110
−120
−130
0.0
13.5
27.0
40.5
54.0
67.5
10M
100M
1G
f − Frequency − MHz
f − Frequency − Hz
G041
G042
Figure 42.
Figure 43.
ADS5483 DIFFERENTIAL NONLINEARITY
ADS5483 INTEGRAL NONLINEARITY
1.0
0.8
4
3
f
f
= 135 MSPS
= 10 MHz, –1 dBFS
f
f
= 135 MSPS
= 10 MHz, –1 dBFS
S
S
IN
IN
0.6
2
0.4
1
0.2
0.0
0
−0.2
−0.4
−0.6
−0.8
−1.0
−1
−2
−3
−4
0
16384
32768
Code
49152
65536
0
16384
32768
Code
49152
65536
G043
G044
Figure 44.
Figure 45.
22
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5483 AC PERFORMANCE
vs
NOISE HISTOGRAM WITH INPUTS SHORTED
INPUT AMPLITUDE (30 MHz Input Signal)
35
30
25
20
15
10
5
180
160
140
120
100
80
SFDR (dBFS,
Dither OFF)
SNR (dBFS,
Dither OFF)
SFDR (dBc, SFDR (dBFS,
Dither ON) Dither ON)
f
f
f
= 80 MSPS for ADS5481
= 105 MSPS for ADS5482
= 135 MSPS for ADS5483
s
s
s
ADS5481/5482
ADS5483
Analog Inputs Shorted to
VCM
60
40
SNR (dBc,
Dither ON)
20
0
SNR (dBFS,
Dither ON)
f
f
= 135 MSPS
= 30 MHz
−20
−40
−60
−80
S
IN
A
= −0.8 to −100 dBFS
SFDR (dBc,
Dither OFF)
SNR (dBc,
Dither OFF)
IN
512k Point FFT
0
−100 −90 −80 −70 −60 −50 −40 −30 −20 −10
0
Input Amplitude − dBFS
G046
G045
Output Code
Figure 46.
Figure 47.
ADS5483 AC PERFORMANCE
ADS5483 TWO-TONE PERFORMANCE
vs
vs
INPUT AMPLITUDE (100 MHz Input Signal)
INPUT AMPLITUDE (f1 = 39.5 MHz and f2 = 40.5 MHz)
180
160
140
120
100
80
−80
SFDR (dBFS,
Dither OFF)
SNR (dBFS,
Dither OFF)
SFDR (dBc, SFDR (dBFS,
Dither ON) Dither ON)
No Dither, Dominant Spur (dBFS)
−90
Dither, Dominant Spur (dBFS)
−100
−110
−120
−130
60
40
SNR (dBc,
Dither ON)
20
0
SNR (dBFS,
Dither ON)
f
f
= 135 MSPS
= 100 MHz
−20
−40
−60
−80
S
Dither, 2F1−F2 (dBFS)
−140
IN
A
= −0.6 to −100 dBFS
SFDR (dBc,
Dither OFF)
SNR (dBc,
Dither OFF)
IN
Dither, 2F2−F1 (dBFS)
512k Point FFT
−150
−100 −90 −80 −70 −60 −50 −40 −30 −20 −10
0
−90 −80 −70 −60 −50 −40 −30 −20 −10
Input Amplitude − dBFS
0
Input Amplitude − dBFS
G065
G047
Figure 48.
Figure 49.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
23
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5483 SFDR
vs
ADS5483 SNR
vs
AVDD5 OVER TEMPERATURE
AVDD5 OVER TEMPERATURE
100
95
90
85
80
80
79
78
77
76
75
T
= 100°C
T
= −20°C
T
= −40°C
f
f
= 135 MSPS
= 70 MHz
A
A
A
S
T
= 85°C
A
IN
T
= 0°C
A
T
= 0°C
T
= 55°C
A
A
T
A
= 55°C
T
A
= 100°C
T
A
= −40°C
T
A
= 25°C
T
A
= 25°C
T
= 85°C
A
T
A
= −20°C
f
f
= 135 MSPS
= 70 MHz
S
IN
4.7
4.8
4.9
5.0
5.1
5.2
5.3
4.7
4.8
4.9
5.0
5.1
5.2
5.3
AVDD5 − Supply Voltage − V
AVDD5 − Supply Voltage − V
G048
G049
Figure 50.
Figure 51.
ADS5483 SFDR
vs
ADS5483 SNR
vs
AVDD3 OVER TEMPERATURE
AVDD3 OVER TEMPERATURE
100
95
90
85
80
80
79
78
77
76
75
T
= −20°C
T
= −40°C
f
f
= 135 MSPS
= 70 MHz
A
A
S
T
= 100°C
A
T
= 85°C
A
IN
T
= 0°C
A
T = 55°C
A
T = 25°C
A
T
A
= 0°C
T
A
= 25°C
T
= 55°C
T
= 85°C
A
A
T
= −20°C
T
A
= −40°C
A
f
f
= 135 MSPS
= 70 MHz
S
T
A
= 100°C
IN
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
AVDD3 − Supply Voltage − V
AVDD3 − Supply Voltage − V
G050
G051
Figure 52.
Figure 53.
24
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5483 SFDR
vs
ADS5483 SNR
vs
DVDD3 OVER TEMPERATURE
DVDD3 OVER TEMPERATURE
100
95
90
85
80
80
79
78
77
76
75
T
= −20°C
T
A
= −40°C
A
f
f
= 135 MSPS
S
T
A
= 100°C
T
= 85°C
A
= 70 MHz
IN
T
= 0°C
A
T
= 25°C
T
= 85°C
A
A
T
= −40°C
T = 55°C
A
T
= 55°C
A
T
= 0°C
A
T
= 100°C
A
A
T
A
= −20°C
T
= 25°C
A
f
f
= 135 MSPS
= 70 MHz
S
IN
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
DVDD3 − Supply Voltage − V
DVDD3 − Supply Voltage − V
G052
G053
Figure 54.
Figure 55.
CMRR
vs
COMMON-MODE INPUT FREQUENCY
ADC WAKEUP TIME
0
−10
−20
−30
−40
−50
−60
−70
−80
90
80
70
60
50
40
30
20
10
0
PDWNF
PDWNS
f
f
= 135 MSPS
= 10 MHz
PDWNF and PDWNS Tested Independently
PDWNx Disabled at 0 ms
PDWNx Enabled at ≈ 8 ms
S
IN
0.1
1
10
100
1k
0
1
2
3
4
5
6
7
8
9
10
t − time − ms
f
IN
− Input Frequency − MHz
G066
G054
Figure 56.
Figure 57.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
25
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5483 SNR
vs
INPUT FREQUENCY AND SAMPLING FREQUENCY
135
130
120
110
100
90
78.5
76
75
78
74
77
79
78.5
76
79
78
74
77
75
80
70
60
78.5
78
73
74
50
75
76
77
72
300
40
10
50
100
150
fIN - Input Frequency - MHz
200
250
70
71
72
73
74
75
76
77
78
79
80
SNR - dBFS
M0048-02
Figure 58.
26
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, sampling rate = max rated, 50% clock duty cycle, 3-VPP differential sinusoidal clock, analog input amplitude =
–1 dBFS, AVDD5 = 5 V, AVDD3 = 3.3 V, and DVDD3 = 3.3 V, unless otherwise noted.
ADS5483 SFDR
vs
INPUT FREQUENCY AND SAMPLING FREQUENCY
135
130
75
80
70
95
120
110
100
90
85
65
90
70
75
95
65
80
85
90
80
70
60
70
85
80
95
75
65
50
90
40
10
50
65
100
150
fIN - Input Frequency - MHz
200
250
300
95
60
70
75
80
85
90
SFDR - dBc
M0049-02
Figure 59.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
27
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
APPLICATIONS INFORMATION
Theory of Operation
The ADS5481/ADS5482/ADS5483 (ADS548x) is a 16-bit, 80-135MSPS family of monolithic pipeline ADCs. The
bipolar analog core operates from 5-V and 3.3-V supplies, while the output uses a 3.3-V supply to provide
LVDS-compatible outputs. Prior to the track-and-hold, the analog input signal passes through a high-performance
bipolar buffer. The buffer presents a high and consistent impedance to the analog inputs. The buffer isolates the
board circuitry external to the ADC from the sampling glitches caused by the track-and-hold in the ADC. The
conversion process is initiated by the falling edge of the external input clock. At that instant, the differential input
signal is captured by the input track-and-hold, and the input sample is converted sequentially by a series of lower
resolution stages, with the outputs combined in a digital correction logic block. Both the rising and the falling
clock edges are used to propagate the sample through the pipeline every half clock cycle. This process results in
a data latency of 4.5 clock cycles, after which the output data are available as a 16-bit parallel word, coded in
offset binary format.
Input Configuration
The analog input for the ADS548x consists of an analog pseudo-differential buffer followed by a bipolar transistor
T&H. The analog buffer isolates the source driving the input of the ADC from any internal switching and presents
a high impedance that is easy to drive at high input frequencies, compared to an ADC without a buffered input.
The input common-mode is set internally through a 1000-Ω resistor connected from 3.1 V to each of the inputs.
This configuration results in a differential input impedance of 2 kΩ at 0 Hz.
ADS548x
Bipolar
Transistor
Buffer
AVDD5
~ 2 nH Bond Wire
10 W
INP
~ 200 fF
Package
~ 200 fF
Bond Pad
3 pF
1000 W
Track and Hold,
1st Pipeline Stage
Analog
Inputs
AGND
VCM
AVDD5
3 pF
AGND
1000 W
~ 2 nH Bond Wire
INM
10 W
~ 200 fF
Package
~ 200 fF
Bond Pad
Bipolar
Transistor
Buffer
AGND
S0293-02
Figure 60. Analog Input Circuit
For a full-scale differential input, each of the differential lines of the input signal (pins 11 and 12) swings
symmetrically between (3.1 V + 0.75 V) and (3.1 V – 0.75 V). This range means that each input has a maximum
signal swing of 1.5 VPP for a total differential input signal swing of 3 VPP. Operation below 3 VPP is allowable, with
the characteristics of performance versus input amplitude demonstrated in Figure 6 through Figure 10. For
instance, for performance at 2 VPP rather than 3 VPP, refer to the SNR and SFDR at –3.5 dBFS (0 dBFS =
3 VPP). The maximum swing is determined by the internal reference voltage generator, eliminating the need for
any external circuitry for this purpose. The primary degradation visible if the max amplitude is kept to 2 VPP is
~3 dBc of SNR compared to using 3 VPP, while SFDR will be the same or even improved. The smaller input
signal will also likely help any components in the signal chain prior to the ADC to be more linear and provide
better distortion.
28
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
The ADS548x performs optimally when the analog inputs are driven differentially. The circuit in Figure 61 shows
one possible configuration using an RF transformer with termination either on the primary or on the secondary of
the transformer. If voltage gain is required, a step-up transformer can be used.
Z0
R0
50 W
50 W
INP
R
200 W
ADS548x
AC Signal
Source
INM
n = 2:1
S0176-04
Figure 61. Converting a Single-Ended Input to a Differential Signal Using an RF Transformer
Dither
The ADS548x family of devices contain a dither option that is enabled via the DITHEREN pin. Dither is a
technique applied to convert small static errors in the converter to dynamic errors, which will look similar to white
noise in the output. In virtually all cases tested, the harmonic performance is equal or better when dither is
enabled versus disabled. It improves the harmonics that are a function of the static errors. The dither is very low
level and will only be indicated in the output waveform as wideband noise that may slightly degrade the SNR
(<0.5dB). It is recommended that it be enabled, but users should allow the capability to disable it in the event
they suspect it may be degrading their specific application, or to compare the results during their evaluation.
Figure 6 through Figure 10 show the minor differences of dither ON/OFF when carefully studied.
External Voltage Reference
For systems that require the analog signal gain to be adjusted or calibrated, this can be performed by using an
external reference. The dependency on the signal amplitude to the value of the external reference voltage is
characterized typically by Figure 62 (VREF = 1.2 V is normalized to 0 dB as this is the internal reference
voltage). As can be seen in the linear fit, this equates to approximately ~1 dB of signal adjustment per 100 mV of
reference adjustment. The range of allowable variation depends on the analog input amplitude that is applied to
the inputs and the desired spectral performance, as can be seen in the performance versus external reference
graphs in Figure 63 and Figure 64.
For dc-coupled applications that use the VCM pin of the ADS548x as the common mode of the signal in the
analog signal gain path prior to the ADC inputs, Figure 66 indicates very little change in VCM output as VREF is
externally adjusted. The VCM output is buffered with a 2kΩ series output resistor.
The method for disabling the internal reference for use with an external reference is described in Table 5 .
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
29
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
10
8
100
95
90
85
80
75
70
f
f
A
= 135 MSPS
= 30 MHz
S
A
= −2 dBFS
IN
IN
= < −1 dBFS
IN
A
= −1 dBFS
IN
Normalized to 1.2 VREF
6
Linear Fit: y = −9.8x + 11.8
4
A
= −10 dBFS
IN
A
= −4 dBFS
IN
2
A
= −6 dBFS
IN
f
f
= 135 MSPS
= 30 MHz
S
0
IN
A
= −3 dBFS
IN
Dither Enabled
Signal Amplitude Relative
to Adjusted Fullscale
−2
−4
A
= −7 dBFS
IN
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
Applied External VREF − V
Applied External VREF − V
G057
G058
Figure 62. Signal Gain Adjustment versus External
Reference (VREF)
Figure 63. SFDR versus External VREF and AIN
80
2.3
A
= −3 dBFS
f
f
= 135 MSPS
= 30 MHz
IN
A
= −1 dBFS
S
IN
78
76
74
72
70
68
66
64
62
60
A
= −2 dBFS
IN
IN
A
= −4 dBFS
IN
2.2
2.1
2.0
1.9
1.8
1.7
Signal Adjusted to −1 dBFS
A
= −6 dBFS
IN
A
= −7 dBFS
IN
f
f
= 135 MSPS
= 30 MHz
Dither Enabled
Signal Amplitude Relative
to Adjusted Fullscale
S
IN
A
= −10 dBFS
IN
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
Applied External VREF − V
Applied External VREF − V
G059
G060
Figure 64. SNR versus External VREF and AIN
Figure 65. Total Power Consumption versus
External VREF
3.20
3.19
3.18
3.17
3.16
3.15
3.14
3.13
3.12
3.11
3.10
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
Applied External VREF − V
G061
Figure 66. VCM Pin Output versus External VREF
30
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
Clock Inputs
The ADS548x equivalent clock input circuit is shown in Figure 67. The clock inputs can be driven with either a
differential clock signal or a single-ended clock input, but differential is highly recommended. The characterization
of the ADS548x is typically performed with a 3-VPP differential clock, but the ADC performs well with a differential
clock amplitude down to ~1 VPP, as shown in Figure 69 and Figure 70 . The clock amplitude becomes more of a
factor in performance as the analog input frequency increases. When single-ended clocking is a necessity, it is
best to connect CLKM to ground with a 0.01-μF capacitor, while CLKP is ac-coupled with a 0.01-μF capacitor to
the clock source, as shown in Figure 68.
Figure 67. Clock Input Circuit
Square Wave or
CLKP
Sine Wave
0.01 mF
ADS548x
CLKM
0.01 mF
S0168-08
Figure 68. Single-Ended Clock
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
31
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
SFDR
vs
SNR
vs
CLOCK AMPLITUDE
CLOCK AMPLITUDE
100
95
90
85
80
75
70
80
78
76
74
72
70
68
66
64
62
60
f
= 9.97 MHz
IN
f
= 100.33 MHz
IN
f
= 9.97 MHz
IN
f
= 69.59 MHz
f
= 69.59 MHz
IN
IN
f
= 30.13 MHz
IN
f
= 100.33 MHz
IN
f
= 30.13 MHz
IN
f
= 135 MSPS
f = 135 MSPS
S
S
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Clock Amplitude − V
Clock Amplitude − V
PP
PP
G055
G056
Figure 69.
Figure 70.
For jitter-sensitive applications, the use of a differential clock has some advantages at the system level. The
differential clock allows for common-mode noise rejection at the printed circuit board (PCB) level. With a
differential clock, the signal-to-noise ratio of the ADC is better for jitter-sensitive, high-frequency applications
because the board level clock jitter is superior.
The sampling process will be more sensitive to jitter using high analog input frequencies or slow clock
frequencies. Large clock amplitude levels are recommended when possible to reduce the indecision (jitter) in the
ADC clock input buffer. Whenever possible, the ideal combination is a differential clock with large signal swing
(~1-3Vpp). Figure 71 demonstrates a recommended method for converting a single-ended clock source into a
differential clock; it is similar to the configuration found on the evaluation board and was used for much of the
characterization. See also Clocking High Speed Data Converters (SLYT075) for more details.
0.1 mF
Clock
CLKP
Source
ADS548x
CLKM
S0194-03
Figure 71. Differential Clock
The common-mode voltage of the clock inputs is set internally to ~2 V using internal 0.5-kΩ resistors. It is
recommended to use ac coupling, but if this scheme is not possible, the ADS548x features good tolerance to
clock common-mode variation (as shown in Figure 72 and Figure 73). The internal ADC core uses both edges of
the clock for the conversion process. Ideally, a 50% duty-cycle clock signal should be provided. Performance
degradation as a result of duty cycle can be seen in Figure 74.
32
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
100
90
80
70
60
50
81
79
77
75
73
71
69
67
65
10 MHz
30 MHz
70 MHz
100 MHz
10 MHz
70 MHz
30 MHz
100 MHz
231 MHz
231 MHz
2.5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.5
1.0
1.5
2.0
3.0
3.5
Clock Common Mode Voltage − V
Clock Common Mode Voltage − V
G062
G063
Figure 72. SFDR versus Clock Common Mode
Figure 73. SNR versus Clock Common Mode
100
f
A
= 135 MSPS
S
10 MHz
= −1 dBFS
IN
90
Clock Input = 3 Vpp
70 MHz
80
70
60
50
30 MHz
231 MHz
100 MHz
0
10
20
30
40
50
60
70
80
90 100
Clock Duty Cycle − %
G064
Figure 74. SFDR vs Clock Duty Cycle
The ADS5483 is capable of achieving 78.2 dBFS SNR at 100 MHz of analog input frequency. In order to achieve
the SNR at 100 MHz the clock source rms jitter (at the ADC clock input pins) must be at most 205 fsec in order
for the total rms jitter to be 220 fsec due to internal ADC aperture jitter of ~80 fsec. A summary of maximum
recommended rms clock jitter as a function of analog input frequency for the ADS5483 is provided in Table 3.
The equations used to create the table are presented and can be used to estimate required clock jitter for
virtually any pipeline ADC.
Table 3. Recommended Approximate RMS Clock Jitter for ADS5483
ANALOG INPUT FREQUENCY
(MHz)
MEASURED SNR
(dBc)
TOTAL JITTER
(fsec rms)
MAXIMUM CLOCK JITTER
(fsec rms)
1
78.2
78
19581
2004
300
19581
2002
289
205
158
129
92
10
70
77.8
77.2
76
100
130
170
230
300
220
177
75.8
75.1
73.2
152
122
116
84
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
33
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
Equation 1 and Equation 2 are used to estimate the required clock source jitter.
SNR (dBc) = -20 ´ LOG10 (2 ´ p ´ fIN ´ jTOTAL
)
(1)
(2)
2
1/2
jTOTAL = (jADC2 + jCLOCK
)
where:
jTOTAL = the rms summation of the clock and ADC aperture jitter;
jADC = the ADC internal aperture jitter which is located in the data sheet;
jCLOCK = the rms jitter of the clock at the clock input pins to the ADC; and
fIN = the analog input frequency.
Notice that the SNR is a strong function of the analog input frequency, not the clock frequency. The slope of the
clock source edges can have a mild impact on SNR as well and is not taken into account for these estimates.
For this reason, maximizing clock source amplitudes at the ADC clock inputs is recommended, though not
required (faster slope is desirable for jitter-related SNR). For more information on clocking high-speed ADCs, see
Application Note SLWA034, Implementing a CDC7005 Low Jitter Clock Solution For High-Speed, High-IF ADC
Devices, on the Texas Instruments web site. Recommended clock distribution chips (CDCs) are the TI
CDCE72010 and CDCM7005. Depending on the jitter requirements, a band pass filter (BPF) is sometimes
required between the CDC and the ADC. If the insertion loss of the BPF causes the clock amplitude to be too
low for the ADC, or the clock source amplitude is too low to begin with, an inexpensive amplifier can be placed
between the CDC and the BPF, as its harmonics and wide-band noise will be reduced by the BPF.
Figure 75 represents a scenario where an LVCMOS single-ended clock output is used from a TI CDCE72010
with the clock signal path optimized for maximum amplitude and minimum jitter. The jitter of this setup is difficult
to estimate and requires a careful phase noise analysis of the clock path. The BPF (and possibly a low-cost
amplifier because of insertion loss in the BPF) can improve the jitter between the CDC and ADC when the jitter
provided by the CDC is still not adequate. The total jitter at the CDCE72010 output depends largely on the phase
noise of the VCXO/VCO selected, as well as from the CDCE72010 itself.
Board Master
Reference Clock
(High or Low Jitter)
AMP and/or BPF Optional
10 MHz
REF
CLKP
CLKM
BPF
XFMR
LVCMOS
AMP
100 MHz
ADC
TI ADS548x
400 MHz (To Transmit DAC)
100 MHz (To DSP)
LVPECL
or
LVCMOS
Low Jitter Oscillator
400 MHz
100 MHz (To FPGA)
To Other
CDC
(Clock Distribution Chip)
Ex: TI CDCE72010
VCO/
VCXO
B0268-01
Consult the CDCE72010 data sheet for proper schematic and specifications regarding allowable input and output
frequency and amplitude ranges.
Figure 75. Optimum Jitter Clock Circuit
34
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
Digital Outputs
The ADC provides eight LVDS-compatible, offset binary, DDR data outputs (2 bits per LVDS output driver) and a
data-ready LVDS signal (DRY). It is recommended to use the DRY signal to capture the output data of the
ADS548x (use as a Clock Output). DRY is source-synchronous to the DATA outputs and operates at the same
frequency, creating a full-rate DDR interface that updates data on both the rising and falling edges of DRY. It is
recommended that the capacitive loading on the digital outputs be minimized. Higher capacitance shortens the
data-valid timing window. The values given for timing (see Figure 1) were obtained with a 5-pF parasitic board
capacitance to ground on each LVDS line. When setting the time relationship between DRY and DATA at the
receiving device, it is generally recommended that setup time be maximized, but this partially depends on the
setup and hold times of the device receiving the digital data. Since DRY and DATA are coincident, it will likely be
necessary to delay either DRY such that DATA setup time is maximized.
The LVDS outputs all require an external 100-Ω load between each output pair in order to meet the expected
LVDS voltage levels. For long trace lengths, it may be necessary to place a 100-Ω load on each digital output as
close to the ADS548x as possible and another 100-Ω differential load at the end of the LVDS transmission line to
terminate the transmission line and avoid signal reflections. The effective load in this case reduces the LVDS
voltage levels by half. The current of all LVDS drivers is set externally with a resistor connected between the
LVDSB (LVDS Bias) pin and ground. Normal LVDS current is 3.5mA per LVDS pair, set with a 10kΩ external
resistor. For systems with excessive load capacitance on the LVDS lines, reducing the resistor value in order to
increase the LVDS Bias current is allowed to create a stronger LVDS drive capability. For systems with short
traces and minimal loading, increasing the resistor in order to decrease the LVDS current is allowable in order to
save power. Table 4 provides a sampling of LVDSB resistor values should deviation from the recommended
LVDS output current of 3.5mA be considered. It is not recommended to exceed the range listed in the table. If
the LVDS bias current is adjusted, the differential load resistance should also be adjusted to maintain voltage
levels within the specification for the LVDS outputs. The signal integrity of the LVDS lines on the board layout
should be scrutinized to ensure proper LVDS signal integrity exists.
Table 4. Setting the LVDS Current Drive
LVDSB RESISTOR TO GND, Ω
LVDS NOMINAL CURRENT, mA
6k
5.6
4.3
3.5
2.8
2.3
2.0
1.7
1.5
8k
10k (value for normal recommended operation)
12k
14k
16k
18k
20k
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
35
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
Power Supplies and Sleep Modes
The ADS548x uses three power supplies. For the analog portion of the design, a 5-V and 3.3-V supply (AVDD5
and AVDD3) are used, while the digital portion uses a 3.3-V supply (DVDD3). The use of low-noise power
supplies with adequate decoupling is recommended. Linear supplies are preferred to switched supplies; switched
supplies generate more noise that can be coupled to the ADS548x. However, the PSRR value and plot shown in
Figure 76 were obtained without bulk supply decoupling capacitors. When bulk (0.1 μF) decoupling capacitors
are used near the supply pins, the board-level PSRR is much higher than the stated value for the ADC. The user
may be able to supply power to the device with a less-than-ideal supply and still achieve very good performance.
It is not possible to make a single recommendation for every type of supply and level of decoupling for all
systems. If the noise characteristics of the available supplies are understood, a study of the PSRR data for the
ADS548x may provide the user with enough information to select noisy supplies if the performance is still
acceptable within the frequency range of interest. The power consumption of the ADS548x does not change
substantially over clock rate or input frequency.
0
−20
−40
AVDD3V
−60
AVDD5V
−80
−100
DVDD3V
−120
0.1
1
10
100
1k
f
IN
− Input Frequency − MHz
G067
Figure 76. PSRR versus Supply Injected Frequency
Two separate sleep modes are offered. They are differentiated by the amount of power consumed and the time it
takes for the ADC to wakeup from sleep. The light sleep mode consumes 605mW and can be used when
wakeup of less than 600us is required. Deep sleep consumes 70mW and requires 6ms to wakeup. See the
wakeup characteristic at Figure 57. For directions on enabling these modes, see Table 5. The input clock can be
in either state when the power down modes are enabled. The device can enter power-down mode whether using
internal or external reference. However, the wakeup time from light sleep enabled to external reference mode is
dependent on the external reference voltage and is not necessarily 0.6 ms, but should be noticeably faster than
deep sleep wakeup. No specific power sequences are required.
Table 5. Power Down and Reference Modes
MODE
ADC ON - Internal reference
ADC ON - External reference
Light sleep
PDWNF PIN
Low
PDWNS PIN
Low
POWER CONSUMPTION
2.2 W
WAKEUP TIME
On
On
High
High
2.2 W
High
Low
605 mW when enabled
70 mW when enabled
0.6 ms
6 ms
Deep sleep
Low
High
36
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
Layout Information
The evaluation board represents a good model of how to lay out the printed circuit board (PCB) to obtain the
maximum performance from the ADS548x. Follow general design rules, such as the use of multilayer boards, a
single ground plane for ADC ground connections, and local decoupling ceramic chip capacitors. The analog input
traces should be isolated from any external source of interference or noise, including the digital outputs as well
as the clock traces. The clock signal traces should also be isolated from other signals, especially in applications
such as high IF sampling where low jitter is required. Besides performance-oriented rules, care must be taken
when considering the heat dissipation of the device. The thermal heatsink included on the bottom of the package
should be soldered to the board as described in the PowerPad Package section. See the ADS548x EVM User
Guide on the TI web site for the evaluation board schematic.
PowerPAD Package
The PowerPAD package is a thermally-enhanced, standard-size IC package designed to eliminate the use of
bulky heatsink and slugs traditionally used in thermal packages. This package can be easily mounted using
standard PCB assembly techniques, and can be removed and replaced using standard repair procedures.
The PowerPAD package is designed so that the leadframe die pad (or thermal pad) is exposed on the bottom of
the IC. This pad design provides an extremely low thermal resistance path between the die and the exterior of
the package. The thermal pad on the bottom of the IC can then be soldered directly to the PCB, using the PCB
as a heatsink.
Assembly Process
1. Prepare the PCB top-side etch pattern including etch for the leads as well as the thermal pad as illustrated in
the Mechanical Data section (at the end of this data sheet).
2. Place a 6-by-6 array of thermal vias in the thermal pad area. These holes should be 13 mils (0.013 in or
0.3302 mm) in diameter. The small size prevents wicking of the solder through the holes.
3. It is recommended to place a small number of 25 mil (0.025 in or 0.635 mm) diameter holes under the
package, but outside the thermal pad area, to provide an additional heat path.
4. Connect all holes (both those inside and outside the thermal pad area) to an internal copper plane (such as a
ground plane).
5. Do not use the typical web or spoke via-connection pattern when connecting the thermal vias to the ground
plane. The spoke pattern increases the thermal resistance to the ground plane.
6. The top-side solder mask should leave exposed the terminals of the package and the thermal pad area.
7. Cover the entire bottom side of the PowerPAD vias to prevent solder wicking.
8. Apply solder paste to the exposed thermal pad area and all of the package terminals.
For more detailed information regarding the PowerPAD package and its thermal properties, see either the
PowerPAD Made Easy application brief (SLMA004) or the PowerPAD Thermally Enhanced Package application
report (SLMA002), both available for download at www.ti.com.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
37
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
SLAS565C –JUNE 2008–REVISED OCTOBER 2009..................................................................................................................................................... www.ti.com
DEFINITION OF SPECIFICATIONS
The injected frequency level is translated into dBFS,
the spur in the output FFT is measured in dBFS, and
the difference is the PSRR in dB. The measurement
calibrates out the benefit of the board supply
decoupling capacitors.
Analog Bandwidth
The analog input frequency at which the power of the
fundamental is reduced by 3 dB with respect to the
low-frequency value.
Signal-to-Noise Ratio (SNR)
Aperture Delay
SNR is the ratio of the power of the fundamental (PS)
to the noise floor power (PN), excluding the power at
dc and in the first five harmonics.
The delay in time between the rising edge of the input
sampling clock and the actual time at which the
sampling occurs.
P
10
P
S
SNR + 10log
Aperture Uncertainty (Jitter)
The sample-to-sample variation in aperture delay.
N
(4)
SNR is either given in units of dBc (dB to carrier)
when the absolute power of the fundamental is used
as the reference, or dBFS (dB to full-scale) when the
power of the fundamental is extrapolated to the
converter full-scale range.
Clock Pulse Duration/Duty Cycle
The duty cycle of a clock signal is the ratio of the time
the clock signal remains at a logic high (clock pulse
duration) to the period of the clock signal, expressed
as a percentage.
Signal-to-Noise and Distortion (SINAD)
SINAD is the ratio of the power of the fundamental
(PS) to the power of all the other spectral components
including noise (PN) and distortion (PD), but excluding
dc.
Differential Nonlinearity (DNL)
An ideal ADC exhibits code transitions at analog input
values spaced exactly 1 LSB apart. DNL is the
deviation of any single step from this ideal value,
measured in units of LSB.
P
S
Common-Mode Rejection Ratio (CMRR)
SINAD + 10log
10
P
) P
CMRR measures the ability to reject signals that are
presented to both analog inputs simultaneously. The
injected common-mode frequency level is translated
into dBFS, the spur in the output FFT is measured in
dBFS, and the difference is the CMRR in dB.
N
D
(5)
SINAD is either given in units of dBc (dB to carrier)
when the absolute power of the fundamental is used
as the reference, or dBFS (dB to full-scale) when the
power of the fundamental is extrapolated to the
converter full-scale range.
Effective Number of Bits (ENOB)
ENOB is a measure in units of bits of converter
performance as compared to the theoretical limit
based on quantization noise:
Temperature Drift
Temperature drift (with respect to gain error and
offset error) specifies the change from the value at
ENOB = (SINAD – 1.76)/6.02
the nominal temperature to the value at TMIN or TMAX
.
It is computed as the maximum variation the
parameters over the whole temperature range divided
Gain Error
Gain error is the deviation of the ADC actual input
full-scale range from its ideal value, given as a
percentage of the ideal input full-scale range.
by TMIN – TMAX
.
Total Harmonic Distortion (THD)
THD is the ratio of the power of the fundamental (PS)
to the power of the first five harmonics (PD).
Integral Nonlinearity (INL)
INL is the deviation of the ADC transfer function from
a best-fit line determined by a least-squares curve fit
of that transfer function. The INL at each analog input
value is the difference between the actual transfer
function and this best-fit line, measured in units of
LSB.
P
10
P
S
THD + 10log
D
(6)
THD is typically given in units of dBc (dB to carrier).
Two-Tone Intermodulation Distortion (IMD3)
IMD3 is the ratio of the power of the fundamental (at
frequencies f1, f2) to the power of the worst spectral
component at either frequency 2f1 – f2 or 2f2 – f1).
IMD3 is given in units of either dBc (dB to carrier)
when the absolute power of the fundamental is used
as the reference, or dBFS (dB to full-scale) when the
power of the fundamental is extrapolated to the
converter full-scale range.
Offset Error
Offset error is the deviation of output code from
mid-code when both inputs are tied to
common-mode.
Power-Supply Rejection Ratio (PSRR)
PSRR is a measure of the ability to reject frequencies
present on the power supply.
38
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS5481 ADS5482 ADS5483
ADS5481
ADS5482
ADS5483
www.ti.com..................................................................................................................................................... SLAS565C –JUNE 2008–REVISED OCTOBER 2009
REVISION HISTORY
Changes from Revision B (July 2009) to Revision C ..................................................................................................... Page
•
•
•
•
•
•
•
•
•
•
Changed Signal-to-noise ratio electrical specifications ........................................................................................................ 5
Changed Spurious-free dynamic range electrical specification ............................................................................................ 5
Changed Second-harmonic electrical specifications ............................................................................................................ 5
Changed Third-harmonic electrical characteristics ............................................................................................................... 6
Changed Worst harmonic/spur electrical characteristics ...................................................................................................... 6
Changed Worst harmonic/spur electrical characteristics ...................................................................................................... 6
Changed Signal-to-noise and distortion electrical characteristics ........................................................................................ 6
Changed Effective number of bits electrical characteristics ................................................................................................. 6
Changed pin PDWNF from 35 to 34 ..................................................................................................................................... 9
Changed pin PDWNS from 34 to 35 ..................................................................................................................................... 9
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
39
Product Folder Link(s): ADS5481 ADS5482 ADS5483
PACKAGE OPTION ADDENDUM
www.ti.com
10-Jun-2014
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
ADS5481IRGC25
ADS5481IRGCR
ACTIVE
VQFN
VQFN
RGC
64
64
25
TBD
Call TI
Call TI
-40 to 85
-40 to 85
AZ5481
ACTIVE
ACTIVE
RGC
RGC
2000
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
AZ5481
AZ5481
ADS5481IRGCT
VQFN
64
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS5482IRGC25
ADS5482IRGCR
ACTIVE
ACTIVE
VQFN
VQFN
RGC
RGC
64
64
25
TBD
Call TI
Call TI
-40 to 85
-40 to 85
AZ5482
AZ5482
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
ADS5482IRGCT
ADS5483IRGC25
ADS5483IRGCR
ADS5483IRGCT
ACTIVE
ACTIVE
ACTIVE
ACTIVE
VQFN
VQFN
VQFN
VQFN
RGC
RGC
RGC
RGC
64
64
64
64
250
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-3-260C-168 HR
Level-3-260C-168 HR
Level-3-260C-168 HR
Level-3-260C-168 HR
-40 to 85
-40 to 85
-40 to 85
-40 to 85
AZ5482
AZ5483
AZ5483
AZ5483
Green (RoHS
& no Sb/Br)
2000
250
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
10-Jun-2014
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
5-Feb-2011
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
ADS5481IRGCR
ADS5481IRGCT
ADS5482IRGCR
ADS5482IRGCT
ADS5483IRGCR
ADS5483IRGCT
VQFN
VQFN
VQFN
VQFN
VQFN
VQFN
RGC
RGC
RGC
RGC
RGC
RGC
64
64
64
64
64
64
2000
250
330.0
330.0
330.0
330.0
330.0
330.0
16.4
16.4
16.4
16.4
16.4
16.4
9.3
9.3
9.3
9.3
9.3
9.3
9.3
9.3
9.3
9.3
9.3
9.3
1.5
1.5
1.5
1.5
1.5
1.5
12.0
12.0
12.0
12.0
12.0
12.0
16.0
16.0
16.0
16.0
16.0
16.0
Q2
Q2
Q2
Q2
Q2
Q2
2000
250
2000
250
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
5-Feb-2011
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
ADS5481IRGCR
ADS5481IRGCT
ADS5482IRGCR
ADS5482IRGCT
ADS5483IRGCR
ADS5483IRGCT
VQFN
VQFN
VQFN
VQFN
VQFN
VQFN
RGC
RGC
RGC
RGC
RGC
RGC
64
64
64
64
64
64
2000
250
333.2
333.2
333.2
333.2
333.2
333.2
345.9
345.9
345.9
345.9
345.9
345.9
28.6
28.6
28.6
28.6
28.6
28.6
2000
250
2000
250
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明