CD54AC541F3A [TI]
OCTAL BUFFER/LINE DRIVERS, 3-STATE; 八路缓冲器/线路驱动器，三态
| 型号： | CD54AC541F3A |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | OCTAL BUFFER/LINE DRIVERS, 3-STATE |
| 文件： | 总14页 (文件大小：491K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data sheet acquired from Harris Semiconductor
SCHS285A – Revised November 1999
The CD54/74AC540, -541, and CD54/74ACT540, -541 octal
buffer/line drivers use the RCA ADVANCED CMOS technology. The
CD54/74AC/ACT540 are inverting 3-state buffers having two
active-LOW output enables. The CD54/74AC/ACT541 are
non-inverting3-statebuffershavingtwoactive-LOWoutputenables.
The CD74AC540, -541, and CD74ACT540, -541 are supplied in
20-lead dual-in-line plastic packages (E suffix) and in 20-lead
dual-in-line small-outline plastic packages (M suffix). Both package
types are operable over the following temperature ranges: Industrial
(–40 to +85°C) and Extended Industrial/Military (–55 to +125°C).
The CD54AC540, -541, and CD54ACT540, -541, available in chip
form (H suffix), are operable over the –55 to +125°C temperature
range.
L
H
Z
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MAXIMUM RATINGS, Absolute-Maximum Values:
DC SUPPLY-VOLTAGE (V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 to 6 V
CC
DC INPUT DIODE CURRENT, I (for V < –0.5 or V > V
+ 0.5 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
IK
I
I
CC
(for V < –0.5 or V > V + 0.5 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
CC
DC OUTPUT DIODE CURRENT, I
DC OUTPUT SOURCE OR SINK CURRENT per Output Pin, I (for V > –0.5 or V < V
OR GROUND CURRENT (I or I
CC GND
PACKAGE THERMAL IMPEDANCE, θ (see Note 1): E package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W
OK
O
O
+ 0.5 V) . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
O
O
O
CC
DC V
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100 mA*
CC
JA
M package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W
STORAGE TEMPERATURE (T ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65 to +150°C
stg
LEAD TEMPERATURE (DURING SOLDERING):
At distance 1/16 ± 1/32 in. (1.59 ± 0.79 mm) from case for 10 s maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +265°C
Unit inserted into PC board min. thickness 1/16 in. (1.59 mm) with solder contacting lead tips only . . . . . . . . . . . . . . . . . . . . . . . . +300°C
* For up to 4 outputs per device: add ±25 mA for each additional output.
NOTE 1:
The package thermal impedance is calculated in accordance with JESD 51.
2
3
4
ns
5
6
PACKAGE OPTION ADDENDUM
www.ti.com
26-Sep-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
CDIP
CDIP
CDIP
SOIC
Drawing
CD54AC541F3A
CD54ACT540F3A
CD54ACT541F3A
CD74AC540M
ACTIVE
ACTIVE
ACTIVE
ACTIVE
J
J
20
20
20
20
1
1
1
TBD
TBD
TBD
Call TI
Call TI
Call TI
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
J
DW
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
CD74AC540ME4
CD74AC541E
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
OBSOLETE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
PDIP
PDIP
SOIC
SOIC
SOIC
SOIC
SSOP
SSOP
SSOP
PDIP
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
SOIC
SOIC
SOIC
SOIC
DW
N
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
CD74AC541EE4
CD74AC541M
N
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
DW
DW
DW
DW
DB
DB
DB
N
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
CD74AC541M96
CD74AC541M96E4
CD74AC541ME4
CD74AC541SM
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
CD74AC541SM96
CD74AC541SM96E4
CD74ACT540E
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
CD74ACT540M
DW
DW
DW
DW
N
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
CD74ACT540M96
CD74ACT540M96E4
CD74ACT540ME4
CD74ACT541E
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
CD74ACT541EE4
CD74ACT541M
N
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
DW
DW
DW
DW
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
CD74ACT541M96
CD74ACT541M96E4
CD74ACT541ME4
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
CD74ACT541SM
OBSOLETE
ACTIVE
SSOP
SSOP
DB
DB
20
20
TBD
Call TI
Call TI
CD74ACT541SM96
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
26-Sep-2005
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
no Sb/Br)
CD74ACT541SM96E4
ACTIVE
SSOP
DB
20
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan
-
The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS
&
no Sb/Br)
-
please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
WWW.ALLDATASHEET.COM
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com
相关型号：
©2020 ICPDF网 联系我们和版权申明